MACHINE PREPARATION
ATTENTION: always use detergents whose manufacturer's label indicates
their suitability for scrubbing machines. Do not use acid or alkaline products or
solvents without this indication.
always use low foam detergent. To avoid the production of foam, before
starting to clean, put a minimum quantity of antifoam liquid into the recovery
tank. Do not use pure acids.
ATTENTION: you are advised to always wear protective gloves in order to
avoid the risk of serious injury to your hands
14.
RECOVERY TANK
Make sure the recovery tank is empty, otherwise empty it completely.
Verify that the recovery tank is correctly inserted in its housing, and that the tubes are correctly inserted
in the tank elbows.
Verify that the cap is correctly closed.
15.
ASSEMBLING THE BRUSH
To insert the brush:
1. Place the brush in front of the base body
2. Raise the base by using the handlebars as a lever
3. Place the base above the brush
4. Activate the handlebar tilt lever
5. Press the main switch to turn on the machine
6. Pulse press the man present lever to engage the brush to the base
