669019
6
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
5 Betty
1.7 Dataplate
The dataplate is located on the back of the stove. It gives the following data :
- model;
- serial number;
- type of fuel;
- nominal heat output;
- CO measured with 13% O2
- thermal efficiency;
1.8 Instructions for ordering replacement parts
For the end-user:
Contact your service centre and/or dealer to order replacement parts.
For the dealer:
To request any replacement parts contact the Cola s.r.l. after-sales service and/or send a fax clearly specifying
the following data:
- stove model;
- serial number;
- date of purchase;
- list of replacement parts;
- details of faults encountered.
- All work on parts must be carried out by authorised and/or qualified personnel.
- Only use original replacement parts
1.9 Stove decommissioning
For disposal, the stove must be sealed inside strong packing; contact the local authority in charge of such
operations in order to proceed according to the current local regulations.
2 – TRANSPORT AND INSTALLATION
2.1 Packing, handling, shipment and transport
The stove can be lifted using a lift truck, inserting the forks (of suitable length) in the special spaces in the wooden
packing.
Make sure the equipment used for lifting and transport can take the weight of the stove, specified on the dataplate
and in this manual.
Avoid taking the load in areas where it could be a danger if dropped.
Set the stove down on the floor carefully without bumping, and position it in the required place; make sure the
floor can take the weight of the stove, otherwise contact a specialised technician.
2.2 Instructions for safe installation
The stove must be installed by a technician, taking into account the local, national and European regulations. The
stove must be placed on a floor able to take its weight; otherwise corrective measures can be taken according to
the advice of specialised technicians.
Do not keep flammable or heat-sensitive parts near the glass. The minimum front distance for the protection of
flammable objects is 80 cm. Flammable or heat-sensitive parts must be at least 20 cm from the side and the
back wall. If the support base is made of flammable material (wood, cork, etc.) a protection base in 2-3 mm thick
steel plate or a sheet of toughened glass must be provided.
2.3 Connection to the flue
The stove must be connected to the flue with connection supports place on the top part of the stove body and by
means of flue pipes readily available on the market. Connection to the chimney must be made using strong and
stable pipes at least 1.2-2 mm thick. The flue pipe must possibly be straight, to avoid pressure losses, and
towards the flue. The single parts of the exhaust gas pipe must be tight.
To ensure regular operation, the flue draught with stove operating must be between 10 and 14 Pa.
For maximum stove efficiency, a draught control or
damper should be installed in the
flue pipe or chimney.
Every unit must eliminate the fumes through its own flue; never use the same flue for several units.
- hourly consumption;
- flue pipe size;
- minimum safety distance;
- stove external dimensions;
- weight.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cola Betty bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cola Betty in de taal/talen: Engels als bijlage per email.

De handleiding is 0,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info