535645
23
Verklein
Vergroot
Pagina terug
1/38
Pagina verder
Page 23
800 Series
SECTION 3: CONFIGURATION
Changing The Coin Tubes
and Coin Routing
REMOVING/REPLACING THE TUBES
To remove the coin tubes, remove the acceptor
and then remove the grey, smoked front cover
by pulling out on the left side of the cover at the
notch in the housing. The front cover will
swing forward, exposing the tubes. The tubes
can be removed one at a time by pulling up-
ward. Four slots have been placed in the front
of the changer along the pay-out assembly area
to assist in this procedure. Place a screw driver
into the slot and apply an inward pressure to
free the tube retainer tab whilst pulling upwards
on the tube. Replace the coin tubes by inserting
the dove tail guides into the tube holes and
pushing inward and downward.
ABOUT THE SHIMS
The coin tubes in your COINCO GLOBAL2
®
changer utilise six interchangeable shims to
accommodate variable thicknesses of coins.
These shims are color-coded and are fixed to
the bottom of the coin tubes. Shims are re-
moved and replaced by sliding in or out of the
bottom of the coin tube.
NOTE: Do not reuse shims. Installation and
removal can stress the plastic, causing the
shims to lose their ability to stay firmly in
place.
CHANGING THE COIN ROUTING
After changing the coin tubes, the coin routing
needs to be reconfigured via the Digital Display
using Address “A002”.
This address allows the user to change payout
configuration in the field. This feature only
provides a means for the acceptor to alter coin
routing when different physical payout tubes
have been placed in the changer body.
When address A002 is entered five payout
configurations are available. Selection is
achieved by scrolling up (button B) or down
(button D) to the desired configuration. When
the desired setting is reached, press enter (but-
ton C) to store the selection. The far right
decimal point will illuminate to indicate the
setting has been stored to memory. If the
location has the capability of being program-
mable (Display shows Alt1 for example) press-
ing enter (button C) again will enter program-
mable mode. This will be evident if a value
between “a” and “e” is displayed.
To program a coin to a tube, select the tube by
scrolling to the desired tube, (‘a’ is the first tube
on the left) and drop the coin type to be routed
to the tube. If a coin’s value differs from the
coins currently routed to the tube, all coins
previously routed to the tube with different
values will be rejected. If value “e” is chosen
for a new destination, the coin type dropped will
have its routing changed to the cashbox. Press-
ing enter (button C) again will return to the
second sub address menu, esc (button A) will
always return to the high level address selection
menu.
For correct operation the scaling factor should
be equal to the value of the least coin accepted
E.g. if the least value coin accepted is the GBP
10p after altering the payout configuration the
scaling factor in address A010 should be
changed to 10.
Float modes will be turned off and coin counts
will be cleared for any tube in which all coins
assigned to the tube were not previously as-
signed to the tube and have been assigned
during the current payout configuration session.
23

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Coinco-Global-2

Zoeken resetten

  • Mijn zeep automaat wordt gebruikt als wisselaar hoe kan ik dat uitschakelen,de munter is een coinco global 800 Gesteld op 17-2-2022 om 19:36

    Reageer op deze vraag Misbruik melden
  • Goede middag,
    Ik heb een broodautomaat met een munter Global Coino
    Mijn probleem is dat ik deze wel kan instellen op 11€ maar de munter weigert het geld wanneer ik mee dan 4€ in werp.
    Moet ik iets afstellen hier voor.
    Alvast bedankt ,
    Patrick Gesteld op 25-4-2014 om 15:42

    Reageer op deze vraag Misbruik melden
    • Dat ligt aan de bits. Deze dient U dan anders te laten afstellen. Dan kan er wel niet meer met 1 en 2 centjes betaald worden.
      Hoe dit juist moet weet ik niet, dan moet U de firma laten komen waar U hem gekocht heeft.

      Gr
      Raf Geantwoord op 31-5-2014 om 08:03

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Coinco Global 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Coinco Global 2 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info