20
WARNING:
Before clearing the tine blades, always:
● Release the clutch handle.
● Stop the engine.
● Disconnecting the spark plug cable.
● Wait up to 30 minutes after use, to allow the engine to cool.
● Do not put your hand inside the tiller blades.
8.4 AFTER USE
8.4.1 Check for loose or damaged parts. If required, change damaged parts.
8.4.2 Tighten loose screws and nuts.
8.4.3 Clean both tiller blades / tines.
8.4.4 Disconnect the spark plug cable.
9. SERVICING
9.1 SAFETY PRECAUTIONS
Make sure the engine is off before you begin any maintenance or repair. This will eliminate several potential
hazards:
● Carbon monoxide poisoning from engine exhaust.
Never run the machine indoors. The exhaust fumes contain carbon monoxide.
● Burns from hot parts.
Let the engine cool and up to 30 minutes after use before touching.
● Injury from moving parts.
Read the instructions before you begin, and make sure you have the tools and skills required.
To reduce the possibility of fire or explosion, be careful when working around petrol. Use only a
nonflammable solvent, not petrol, to clean parts. Keep cigarettes, sparks and flames away from all fuel
related parts.
