50
English
NOAA All Hazards/Weather
Radio and Alert, w/SAME
NOAA All Hazards/Weather Radio and Alert, w/SAME
•
NOAA broadcasts weather information as described in the
NOAA Weather Channels section on page 25 of this manual.
Listen to one of these receive-only channels at any time. The
transceiver also incorporates “Specific Area Message
Encoding (SAME)” and “Emergency Alert System Codes” sent
by NOAA. These codes provide the type of alert, and are listed
on page 51.
NOTE
Usually only one (1) or two (2) of the weather
channels operate in a location. Select the channel
with the strongest signal in your location. The radio
scans this channel for the weather alert signal.
To Listen to the Weather Channels:
1. From Standby mode, press the WX/ENTER button. The
unit enters the Weather mode and displays on the LCD.
2. Turn the Channel knob or press the Channel Up/Down
buttons on the microphone to change the weather
channels.
3. To exit the Weather mode and return to Standby mode,
press the WX/ENTER button again.
Weather Alert Setup
The Weather Alert mode must be turned On to receive the
Weather Alert condition signal described in the NOAA weather
channels section on page 25.
To Turn Weather Alert On:
1. Enter the Setup menu and scroll to WX/SAME (weather
alert) menu.
2. Press the Enter button and observe the current weather
alert setting — ON, OFF or EXIT.
3. Move the selection arrow to select the desired weather
alert setting.
4. Press the Enter button to select the weather alert setting.
5. When the changes are complete, exit the WX/SAME menu
and return to the Setup menu.
Operating Your Radio
WX/Enter Button
Weather Mode
WX/SAME Menus
