538284
17
Verklein
Vergroot
Pagina terug
1/38
Pagina verder
VHF MARINE RADIO
MR F55
Owner’s Manual
Nothing comes close to a Cobra
®
English
Printed in China Part No. 480-085-P
Revised 11-20-03
A1
English
Our Thanks To You
Introduction
Thank you for purchasing a CobraMarine
VHF radio.
Properly used, this Cobra
®
product will give you
many years of reliable service.
How Your CobraMarine
VHF Radio Works
This radio is a VHF transceiver for fixed mounting on your boat. It gives you 2-way
vessel-to-vessel and vessel-to-shore station communications, primarily for safety
and secondarily for navigation and operational purposes. With it, you can call for
help, get information from other boaters, talk to lock or bridge tenders, and make
radiotelephone calls to anywhere in the world through a marine operator.
Besides 2-way communications, in the U.S.A., the radio can provide quick
access to receive all ten (10) NOAA (National Oceanographic and Atmospheric
Administration) weather channels and alert you to weather emergencies with
a tone on a weather channel you can select for your area.
Customer Assistance
Should you encounter any problems with this product, or not understand
its many features, please refer to this owner’s manual. If you require further
assistance after reading this manual, Cobra
®
Electronics offers the following
customer assistance services:
For Assistance In The U.S.A.
Automated Help Desk English only.
24 hours a day, 7 days a week 773-889-3087 (phone).
Customer Assistance Operators English and Spanish.
8:00 a.m. to 6:00 p.m. CT Mon. through Fri. (except holidays) 773-889-3087 (phone).
Questions English and Spanish.
Faxes can be received at 773-622-2269 (fax).
Technical Assistance English only.
www.cobra.com (on-line: Frequently Asked Questions).
English and Spanish. productinfo
@cobra.com (e-mail).
For Assistance Outside The U.S.A.
Contact Your Local Dealer
Customer Assistance
©2003 Cobra
®
Electronics Corporation
6500
W
est Cortland Street
Chicago
, Illinois 60707 USA
www
.cobra.com
Power
Connection
External
Speaker Jack
Global Positioning
System (GPS) Jack
Antenna
Socket
A3
English
Microphone And
Product Features
Introduction
A2
English
Transceiver Controls,
Indicators And Connections
Introduction
Dual Power
Selectable to one (1) or 25 watts output
power for near or distant calling.
USA/International/Canada Channels
Allows operation on any of the three (3)
different channel maps established for
these areas.
Ten (10) NOAA Weather Channels
Instant access to all of the National
Weather Channels, 24 hours a day.
Emergency Weather Alert
Can alert you with an audible
tone and visual alarm if threatening
weather is nearby.
Instant Channel 16/9
Instant access to the priority
Channel 16 and calling Channel 9.
Digital Selective Calling (DSC)
Allows sending a distress message
at the touch of a button as well as
specific station-to-station calls.
Scan
Lets you scan through all channels in the
active channel map to find conversations
in progress.
Dual-Watch
Lets you monitor two (2) channels at
once — Channel 16 and one (1) user
selectable channel.
Controls On The Microphone
Handy control buttons on the microphone
let you operate one (1) handed at a
distance from the radio.
Illuminated Buttons
Helps you quickly find the buttons
you need in low light conditions.
Mounting Kits Included
Radio can be mounted on, under, or in
almost any flat surface using one (1)
of the included brackets.
Waterproof
Submersible to one (1) meter of water
for 30 minutes — meets JIS7 Standards.
Product Features
Microphone With Auxiliary Controls
On-Off
Power/
Volume
Knob
Backlit LCD
Screen
Down
Button
Squelch
Knob
Radio Status and
Data Display
Instant
Channel
16/9 Button
Active
Channel
Number
Microphone
Cord
Connection
Socket
Position Coordinates –
Latitude and Longitude
Weather/UIC
Button
Dual-Watch
Button
High/Low Power
Button
Scan
Button
Speaker
DSC Distress Button
(Behind Red Spring
Loaded Cover)
Up
Button
Microphone
Down
Button
Talk
Button
Instant
Channel
16/9 Button
Up/Down
Buttons
Can be used
instead of those
on the transceiver.
Instant Channel
16/9 Button
Can be used
instead of the
one on the
transceiver.
Call/Set
Button
Up
Button
Simplex
Operation
Icon
Introduction
Nothing comes close to a Cobra
®
Table Of Contents
1
Introduction
Our Thanks To You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1
Customer Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1
Transceiver Controls, Indicators And Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . A2
Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3
Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Recommendations For Marine Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
VHF Marine Radio Protocols
FCC Licensing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
VHF Marine Radio Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Voice Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Digital Selective Calling (DSC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Maritime Mobile Service Identity (MMSI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Radiotelephone Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Emergency Messages And Distress Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Marine Distress Procedure — DSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
VHF Marine Channel Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
World City Time Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
NOAA Weather Channels And Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Installation and Start-Up
Included In This Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Mounting And Powering The Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Antenna Requirements And Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
External Devices And Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Operating Your Radio
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Set-Up Routines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Voice Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
NOAA All Hazards/Weather Radio And Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Advanced Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
DSC Set-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
DSC Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Warranty
Limited 3-Year Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Customer Service
Product Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Order Form And Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Flush Mount Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Introduction
Nothing comes close to a Cobra
®
Important Safety Information
3
The following WARNINGS and CAUTIONS will make you aware of RF exposure
hazards and how to assure you operate the radio within the FCC RF exposure
limits established for it.
WARNINGS
Your radio generates electromagnetic RF (radio frequency) energy when
it is transmitting. To insure that you and those around you are not exposed
to excessive amounts of that energy, DO NOT touch the antenna when
transmitting and KEEP yourself and all others on your vessel the required
distance away from the antenna while transmitting. SEE page 30 in the
antenna requirements section for further information.
DO NOT operate the radio without a proper antenna or equivalent
dummy load attached. Doing so may expose you to excessive RF
energy and will damage the radio.
DO NOT transmit more than 50% of the time the radio is in use —
50% duty cycle. The radio is transmitting when the Talk button is
pressed and the transmit information shows on the LCD screen.
ALWAYS use only Cobra
®
authorized accessories.
DO NOT operate the radio in an explosive atmosphere, near blasting sites,
or in any area where signs are posted prohibiting radio transmissions.
NEVER connect the transceiver to AC power. It can be a fire hazard, may
cause an electric shock, and may damage the transceiver.
NEVER mount the transceiver or microphone where they might interfere
with operation of your vessel or cause injury.
DO NOT allow children or anyone unfamiliar with proper procedures to
operate the radio without supervision.
Failure to observe any of these warnings may cause you to exceed
FCC RF exposure limits or create other dangerous conditions.
2
English
Important Safety Information
Introduction
Important Safety Information
Before installing and using your CobraMarine
VHF radio,
please read these general precautions and warnings.
Warning And Caution Statements
To make the most of this radio, it must be installed and used properly.
Please read the installation and operating instructions carefully before
installing and using it. Special attention must be paid to the
WARNING
and CAUTION statements in this manual.
WARNING
Statements identify conditions that could result in personal injury or loss of life.
CAUTION
Statements identify conditions that could cause damage to the radio
or other equipment.
Safety Training Information
This CobraMarine
radio is designed for and classified as “Occupational Use Only.”
It must only be used in the course of employment by individuals aware of both the
hazards and the ways to minimize those hazards. This radio is NOT intended for
use in an uncontrolled environment by the “General Population.”
This radio has been tested and complies with the FCC RF exposure limits for
“Occupational Use Only.” This CobraMarine
VHF radio also complies with the
following guidelines and standards regarding RF energy and electromagnetic
energy levels as well as evaluation of those levels for human exposure:
FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating
Compliance with FCC Guidelines for Human Exposure to Radio
Frequency Electromagnetic Fields.
American National Standards Institute (C95.1-1992), IEEE Standard
for Safety Levels with Respect to Human Exposure to Radio Frequency
Electromagnetic Fields, 3 kHz to 300 GHz.
American National Standards Institute (C95.3-1992), IEEE
Recommended Practice for the Measurement of Potentially
Hazardous Electromagnetic Fields — RF and Microwave.
Nothing comes close to a Cobra
®
FCC Licensing Information
5
FCC LICENSING INFORMATION
CobraMarine
VHF radios comply with the FCC (Federal Communication
Commission) requirements that regulate the Maritime Radio Service.
This CobraMarine
radio incorporates a VHF FM transceiver designed for use in
the frequency range of 156.025 to 163.275 MHz. It requires 13.8 volts DC and
has a switchable RF output power of one (1) or 25 watts.
The transceiver is capable of RTCM SC 101 DSC (Digital Selective Calling) operation.
The radio operates on all currently allocated marine channels and is switchable for
use according to U.S.A., International, or Canadian regulations. It features instant
access to emergency Channel 16 and calling Channel 9 as well as NOAA (National
Oceanic and Atmospheric Administration) All Hazards Radio with Alert that can be
accessed by pressing one (1) key.
Station License
An FCC ship station license is no longer required for any vessel traveling in U.S.A.
waters which uses a VHF marine radio, RADAR, or EPIRB (Emergency Position
Indicating Radio Beacon), and which is not required to carry radio equipment.
However, any vessel required to carry a marine radio on an international voyage,
carrying a HF single side band radiotelephone, or carrying a marine satellite
terminal must obtain a station license.
FCC license forms and applications for ship and land stations can be downloaded
through the Internet at www.fcc.gov/forms. Forms can also be obtained by calling
the FCC at 888-225-5322.
International Station License
If your vessel will be entering the sovereign waters of a country other than the
U.S.A. or Canada, you should contact that country’s communications regulatory
authority for licensing information.
Radio Call Sign
Currently, the FCC does not require recreational boaters to have a license. The United
States Coast Guard recommends that the boat’s registration number and state of registry
(e.g., Illinois 1234 AB) be used as a call sign and be clearly visible on the vessel.
Canadian Ship Station License
You need a Radio Operator’s Certificate if your vessel is operated in Canadian waters.
Radio Operator training and certification is available from the Canadian Power
Squadron. Visit their website (http://www.cps-ecp.ca/english/newradiocard.html),
contact the nearest field office or write: Industry of Canada, Radio Regulatory
Branch, Attn: DOSP, 300 Slater Street, Ottawa, Ontario, Canada K1A 0C8.
VHF Marine Radio Protocols
4
English
Recommendations For
Marine Communication
CAUTIONS
AVOID
using or storing the radio at temperatures below -4°F (-20°C) or
above 140°F (60°C).
NEVER connect the transceiver to DC power greater than 16 volts or to
any DC source with reversed polarity. Doing so will damage the transceiver.
DO NOT cut the power cables attached to the transceiver. Improper
reconnection with reversed polarity will damage the transceiver.
POSITION your radio, external speakers, and cables at least three (3) feet (0.9 m)
away from your vessel’s magnetic navigation compass. CHECK your compass
before and after installation to be sure that it has not introduced any deviation.
DO NOT attempt to service any internal parts yourself. Have any
necessary service performed by a qualified technician.
DO NOT drop the transceiver or microphone. Doing so may crack the
case or damage a waterproof seal. Once these items have been dropped,
the original waterproofing cannot be guaranteed.
DO NOT use chemicals or solvents such as mineral spirits and alcohol
to clean your radio. They may damage the case surfaces.
Changes or modifications to your radio MAY VOID its compliance with FCC rules
and make it illegal to use.
Recommendations For Marine Communication
The frequencies your radio uses are set aside to enhance safety afloat and for
vessel navigation and operational messages over a range suitable for nearshore
voyages. If the 25 watt maximum output of your radio isn’t sufficient for the
distances you travel from the coast, consider installing more powerful radio
equipment such as HF single side band or satellite radio for your vessel.
The U.S. Coast Guard does not endorse cellular telephones as substitutes for
marine radios. They generally cannot communicate with rescue vessels and,
if you make a distress call on a cellular telephone, only the party you call will
be able to hear you. Additionally, cellular telephones may have limited coverage
over water and can be hard to locate. If you don’t know where you are, the
Coast Guard will have difficulty finding you if you’re using a cellular telephone.
However, cellular telephones can have a place on board where cellular coverage
is available — to allow social conversations and keep the marine frequencies
uncluttered and available for their intended uses.
Introduction
Nothing comes close to a Cobra
®
Voice Calling
7
Limits On Calling
You must not call the same station for more than 30 seconds at a time.
If you do not get a reply, wait at least two (2) minutes before calling again.
After three (3) calling periods, wait at least 15 minutes before calling again.
Change Channels
After contacting another station on a calling channel, change immediately
to a channel which is available for the type of message you want to send.
Station Identification
Identify, in English, your station by your FCC call sign, ship name, the state registration
number, or other official number at both the beginning and end of each message.
Prohibited Communications
You MUST NOT transmit:
False distress or emergency messages.
Messages containing obscene, indecent, or profane words or meaning.
General calls, signals, or messages (messages not addressed to a particular
station) on Channel 16, except in an emergency or if you are testing your radio.
When you are on land.
Voice Calling
To Call Another Vessel Or A Shore Installation Such As A Lock Or Bridge Tender:
Make sure your radio is On.
Select Channel 16 and listen to make sure it is not being used.
NOTE
Channel 9 may be used by recreational vessels for general-purpose
calling. This frequency should be used whenever possible to relieve
congestion on Channel 16.
When the channel is quiet, press the Talk button and call the ship you wish to
call. (Hold the microphone a few inches from your face and speak directly into
it in a normal tone of voice — clearly and distinctly.) Say “[name of station
being called] THIS IS [your vessel’s name or call sign].”
Once contact is made on the calling channel, you must switch to a proper
working channel. See the channel listing on page 14 through 15.
VHF Marine Radio Protocols
6
English
VHF Marine Radio
Procedures
User Responsibility And Operating Locations
All users are responsible for observing domestic and foreign government
regulations and are subject to severe penalties for violations. The VHF frequencies
on your radio are reserved for marine use and require a special license to operate
from land, including when your boat is on its trailer.
NOTE
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two (2) conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
FCC Warnings: Replacement or substitution of transistors, regular diodes,
or other parts of a unique nature, with parts other than those recommended
by Cobra
®
may cause a violation of the technical regulations of part 80 of the
FCC Rules, or violation of type acceptance requirements of part 2 of the rules.
VHF Marine Radio Procedures
Maintain Your Watch
Whenever your boat is underway, the radio must be turned On and
be tuned to Channel 16 except when being used for messages.
Power
Try one (1) watt first if the station being called is within a few miles. If there
is no answer, switch to a higher power. This will conserve your battery and
minimize interference to other users.
Calling Coast Stations
Call a coast station on its assigned channel. You may use Channel 16
when you do not know the assigned channel.
Calling Other Vessels
Call other vessels on Channel 16 or on Channel 9. (Channel 9 is preferred
for recreational vessel use.) You may also call on ship-to-ship channels
when you know that the vessel is listening on a ship-to-ship channel.
VHF Marine Radio Protocols
Nothing comes close to a Cobra
®
Maritime Mobile
Service Identity (MMSI)
9
VHF Marine Radio Protocols
Maritime Mobile Service Identity (MMSI)
An MMSI is a nine (9) digit number used on a marine radio capable of using digital
selective calling (DSC). It is used to selectively call other vessels or shore stations
and is similar to a telephone number.
For your CobraMarine
radio to operate in the DSC mode, you must enter your
maritime mobile service identity (MMSI) number. See page 49 for instructions
on how to enter it.
The MMSI Number Is Available In The U.S.A. From Any Of Three (3) Sources:
BoatU.S.: 1-800-563-1536 – www.boatus.com/mmsi
Maritel: 1-888-Maritel (1-888-627-4835)
Sea Tow International: 1-631-765-3660 – www.seatow.com
In Canada, Contact:
Industry Canada Spectrum Management Office (only available on the Internet):
http://strategis.ic.gc.ca/epic/internet/insmt-gst.nsf/vwGeneratedInterE/sf01742e.html
To Obtain An MMSI Number Outside The U.S.A.:
Users can obtain an MMSI from their country’s telecommunications authority
or ship registry. This may involve amending or obtaining a ship station license.
WARNING
This equipment is designed to generate a digital maritime distress and
safety signal to facilitate search and rescue. To be effective as a safety
device, this equipment must be used only within communication range
of a shore-based VHF marine channel to distress and safety watch system.
The range of the signal may vary, but under normal conditions should be
approximately 20 nautical miles.
8
English
Digital Selective Calling (DSC)
The vessel Corsair calling the vessel Vagabond:
Corsair:
“Vagabond, this is Corsair.”
Vagabond: “Corsair, this is Vagabond. Reply 72 (or any proper working channel).”
Corsair: “72” or “Roger”
After communications are completed, each vessel must sign off with its
call sign or vessel name and switch to Channel 16.
NOTE
For best sound quality at the station you’re calling, hold the microphone
at least two (2) inches [five (5) cm] from your mouth and slightly off to
one (1) side. Speak in a normal tone of voice.
Digital Selective Calling (DSC)
Digital selective calling is a semi-automated system for establishing a radio
call. It has been designed by the International Maritime Organization (IMO)
as an international standard for VHF, MF, and HF calls and is part of the
Global Maritime Distress and Safety System (GMDSS).
DSC will eventually replace aural (listening) watches on distress frequencies
and will be used to announce routine and urgent maritime safety information
broadcasts. Until DSC is fully implemented, it is still necessary to maintain a
listening watch on Channel 16.
The DSC system allows mariners to instantly send a distress call with GPS
position coordinates (requires a GPS receiver to be connected to the radio)
to the Coast Guard and other vessels within range of the transmission.
DSC also allows mariners to initiate and receive distress, urgent, safety,
routine, position request, position send, and group calls between vessels
equipped with DSC capable radios.
VHF Marine Radio Protocols
For Example
MAYDAY
P
AN
SECURITE
Nothing comes close to a Cobra
®
Emergency Messages
And Distress Procedure
11
Marine Emergency Signals
The three (3) spoken international emergency signals are:
The distress signal
MAYDAY is used to indicate that a station is threatened
by grave and imminent danger and requests immediate assistance.
The urgency signal
PAN is used when the safety of the vessel or person
is in jeopardy. (This signal is properly pronounced pahn.)
The safety signal
SECURITE is used for messages about the safety of navigation or
important weather warnings. (This signal is properly pronounced see-cure-it-tay.)
When using an international emergency signal, the appropriate
signal is to be spoken three (3) times prior to the message.
If You Hear A Distress Call
You must give any message beginning with one (1) of these signals priority
over any other messages.
ALL stations MUST remain silent on Channel 16
for the duration of the emergency unless the message relates directly to
the emergency.
If you hear a distress message from a vessel, stand by your radio. If it is
not answered,
YOU should answer. If the distressed vessel is not nearby,
wait a short time for others who may be closer to acknowledge. Even if
you cannot render direct assistance, you may be in a position to relay
the message.
VHF Marine Radio Protocols
10
English
Radiotelephone Calls
Radiotelephone Calls
Boaters may make and receive radiotelephone calls to and from any number on
the telephone network by using the services of public coast stations. Calls can be
made — for a fee — between your radio and telephones on land, sea, and in the air.
See pages 14 through 23 for the public correspondence (marine operator) channels.
If you plan to use these services, consider registering with the operator of the
public coast station that you plan to work through. Those services can provide
you with detailed information and procedures to follow.
CAUTION
You may disclose privileged information during a radiotelephone call.
Keep in mind that your transmission is NOT private, as it is on a regular
telephone. Both sides of the conversation are being broadcast and can be
heard by anyone who has a radio and tunes to the channel you are using.
Emergency Messages And Distress Procedure
The ability to summon assistance in an emergency is the primary reason
to have a VHF marine radio. The marine environment can be unforgiving,
and what may initially be a minor problem can rapidly develop into a
situation beyond your control.
The Coast Guard monitors Channel 16, responds to all distress calls, and
coordinates all search and rescue efforts. Depending on the availability of
other capable vessels or commercial assistance operators in your vicinity,
Coast Guard or Coast Guard Auxiliary craft may be dispatched.
In any event, do communicate with the Coast Guard as soon as you experience
difficulties and before your situation becomes an emergency. Use the emergency
message procedures only after your situation has become grave or you are faced
with a sudden danger threatening life or property and requiring immediate help.
If you are merely out of gas, do not send an emergency message. Drop your
anchor and call a friend or marina to bring the fuel you need or give you a tow.
VHF Marine Radio Protocols
For Example
Nothing comes close to a Cobra
®
Emergency Messages
and Distress Procedure
13
Keep the radio nearby. Even after your message has been received, the Coast Guard
can find you more quickly if you can transmit a signal for a rescue boat to hone in on.
“Mayday — Mayday — Mayday”
“This is Corsair — Corsair — Corsair” [or “Illinois 1234 AB“ three (3) times]
“Mayday Corsair (or Illinois 1234 AB)”
“Navy Pier bears 220 degrees magnetic — distance five (5) miles”
“Struck submerged object and flooding — need pump and tow”
“Four adults, three children aboard — no one injured”
“Estimate we will remain afloat one-half (
1
2) hour”
“Corsair (or Illinois 1234 AB) is 26 foot sloop with blue hull and tan deck house”
“I will be listening on Channel 16”
“This is Corsair (or Illinois 1234 AB)”
“Over”
It is a good idea to write out a script of the message form and post it where you
and others on your vessel can see it when an emergency message needs to be sent.
Marine Distress Procedure – DSC
Once your radio is connected to a GPS device and is properly set-up with your
MMSI, simply lifting the red spring-loaded door and pressing the button will
automatically send a complete distress call on Channel 70. See the DSC operation
section on pages 54 through 65 for further information and page 55 instruction
on sending a manual DSC distress call.
VHF Marine Radio Protocols
12
English
Emergency Messages
And Distress Procedure
Marine Distress Procedure
Speak slowly — clearly — calmly.
1. Make sure your radio is On.
2. Select VHF Channel 16.
3. Press Talk button and say:
“MAYDAY — MAYDAY — MAYDAY.”
(Or “PAN — PAN — PAN,”
or “SECURITE — SECURITE — SECURITE.”)
4. Say:
“THIS IS [your vessel name or call sign].”
5. Say:
“MAYDAY (or “PAN” or “SECURITE”)
[your vessel name or call sign].
6. Tell where you are:
(what navigational aids or landmarks are near).
7. State the nature of your distress.
8. State the kind of assistance needed.
9. Give number of persons aboard and conditions of any injured.
10. Estimate present seaworthiness of your vessel.
11. Briefly describe your vessel (length, type, color, hull).
12. Say:
“I WILL BE LISTENING ON CHANNEL 16.”
13. End message by saying:
“THIS IS [your vessel name or call sign] OVER.”
14. Release Talk button and listen. Someone should answer.
If not, repeat the call, beginning at item 3 above.
VHF Marine Radio Protocols
Nothing comes close to a Cobra
®
VHF Marine
Channel Assignments
15
Public Correspondence (Marine Operator)
Channels 24, 25, 26, 27, 28, 84, 84A, 85, 85A, 86, 86A, 87, 87A, 88*
For calls to marine operators at public coast stations. You can make and receive
telephone calls through these stations.
Port Operations
Channels 1A*, 5A*, 12*, 14*, 20A, 63A*, 65A, 66A, 73, 74, 77*
Used for directing the movement of ships in or near ports, locks, or waterways.
Messages must be about operational handling, movement, and safety of ships.
Navigational
Channels 13, 67
Channels are available to all vessels. Messages must be about navigation, including
passing or meeting other vessels. These are also the main working channels for
most locks and drawbridges. You must keep your messages short and power output
at no more than one (1) watt.
Maritime Control
Channel 17
For talking to vessels and coast stations operated by state or local governments.
Messages must be about regulation and control, boating activities, or assistance.
Digital Selective Calling
Channel 70
This channel is set aside for distress, safety, and general calling using only digital
selective calling techniques. Voice communication is prohibited; your radio cannot
transmit voice messages on this channel.
Weather
Channels Wx 1 Thru 10
Receive-only channels for NOAA weather broadcasts. You cannot transmit on them.
NOTE
* These channels are restricted to the listed uses in certain parts of
the country or for certain types of users only. Consult FCC rules
or a knowledgeable radio operator before using them.
VHF Marine Radio Protocols
14
English
VHF Marine
Channel Assignments
VHF Marine Channel Assignments
Three (3) sets of VHF channels have been established for marine use in the U.S.A.,
Canada, and the rest of the world (International). Most of the channels are the same
for all three (3) maps, but there are definite differences (see table on the following
pages). Your radio has all three (3) maps built into it and will operate correctly in
whichever area you choose.
The following is a brief outline of the channel assignments in the U.S.A.
Channel Map.
Distress, Safety, and Calling
Channel 16
Getting the attention of another station (calling) or in emergencies
(distress and safety).
Calling
Channel 9
General purpose (non-emergency) calling by non-commercial vessels.
Recreational boaters are urged to use this channel to reduce congestion
on Channel 16.
Intership Safety
Channel 6
Ship-to-ship safety messages and for search and rescue messages to
Coast Guard ships and aircraft.
Coast Guard Liaison
Channel 22A
To talk to the Coast Guard (non-emergency) after making contact on Channel 16.
Non-Commercial
Channels 68*, 69, 71, 72, 78A, 79A*, 80A*
Working channels for small vessels. Messages must be about needs of the
vessel, such as fishing reports, berthing, and rendezvous. Use Channel 72 only
for ship-to-ship messages.
Commercial
Channels 1A, 7A, 8, 9, 10, 11, 18A, 19A, 63A, 67, 72, 79A, 80A, 88A*
Working channels for working ships only. Messages must be about business or
needs of the ship. Use Channels 8, 67, 72, and 88A only for ship-to-ship messages.
VHF Marine Radio Protocols
Nothing comes close to a Cobra
®
VHF Marine
Channel Assignments
17
VHF Marine Radio Protocols
Channel Use
01 Public Correspondence (Marine Operator)
01A Port Operations and Commercial, VTS in selected areas
02 Public Correspondence (Marine Operator)
03 Public Correspondence (Marine Operator)
03A Government Only
04 Public Correspondence (Marine Operator), Port Operations, Ship Movement
04A West Coast (Coast Guard Only); East Coast (Commercial Fishing)
05 Public Correspondence (Marine Operator), Port Operations, Ship Movement
05A Port Operations, VTS in selected areas
06 Intership Safety
07 Public Correspondence (Marine Operator), Port Operations, Ship Movement
07A Commercial
08 Commercial (Intership Only)
09 Boater Calling Channel, Non-Commercial (Recreational)
10 Commercial
11 Commercial, VTS in selected areas
12 Port Operations, VTS in selected areas
13 Intership Navigation Safety (Bridge-to-Bridge). In U.S. waters,
large vessels maintain a listening watch on this channel.
14 Port Operations, VTS in selected areas
15 Environmental (Receive Only). Used by class C EPIRB’s.
15 Canada (EPIRB Buoys Only); International (On-Board Communication)
16 International Distress, Safety and Calling
17 State Controlled (U.S.A. Only)
16
English
VHF Marine
Channel Assignments
VHF Marine Radio Protocols
Channel Channel Map Frequency Power
Number USA Int’l Canada Transmit Receive Limits
01
••
156.050 160.650
01A
156.050 156.050
02 ••156.100 160.700
03 ••156.150 160.750
03A 156.150 156.150
04 156.200 160.800
04A 156.200 156.200
05 156.250 160.850
05A ••156.250 156.250
06 ••156.300 156.300
07 156.350 160.950
07A ••156.350 156.350
08 156.400 156.400
09 ••156.450 156.450
10 ••156.500 156.500
11 ••156.550 156.550
12 ••156.600 156.600
13
••
156.650 156.650 1 Watt USA and CAN
14 ••156.700 156.700
15 Rx Only 156.750
15 ••156.750 156.750 1 Watt CAN and INT
16 156.800 156.800
17 ••156.850 156.850 1 Watt CAN
Nothing comes close to a Cobra
®
VHF Marine
Channel Assignments
19
Channel Use
18 Port Operations, Ship Movement
18A Commercial
19 Port Operations, Ship Movement
19A Commercial
20 Canada (Coast Guard Only); International (Port Operations, Ship Movement)
20A Port Operations
21 Port Operations, Ship Movement
21A U.S. (Government Only); Canada (Coast Guard Only)
22 Port Operations, Ship Movement
22A U.S. and Canadian Coast Guard Liaison and Maritime Safety Information
Broadcasts that are announced on Channel 16
23 Public Correspondence (Marine Operator)
23A Government Only
24 Public Correspondence (Marine Operator)
25 Public Correspondence (Marine Operator)
26 Public Correspondence (Marine Operator)
27 Public Correspondence (Marine Operator)
28 Public Correspondence (Marine Operator)
60 Public Correspondence (Marine Operator)
61 Public Correspondence (Marine Operator), Port Operation, Ship Movement
61A U.S. (Government Only); Canada (Coast Guard Only);
West Coast (Coast Guard Only); East Coast (Commercial Fishing)
62 Public Correspondence (Marine Operator), Port Operations, Ship Movement
62A West Coast (Coast Guard Only); East Coast (Commercial Fishing)
VHF Marine Radio Protocols
18
English
VHF Marine
Channel Assignments
VHF Marine Radio Protocols
Channel Channel Map Frequency Power
Number USA Int’l Canada Transmit Receive Limits
18
156.900 161.500
18A
••
156.900 156.900
19
156.950 161.550
19A
••
156.950 156.950
20
••
157.000 161.600 1 Watt CAN
20A
157.000 157.000
21
••
157.050 161.650
21A
••
157.050 157.050
22
157.100 161.700
22A
••
157.100 157.100
23
••
157.150 161.750
23A
157.150 157.150
24
157.200 161.800
25
••
157.250 161.850
26
••
157.300 161.900
27
••
157.350 161.950
28
••
157.400 162.000
60
156.025 160.625
61
156.075 160.675
61A
156.075 156.075
62
156.125 160.725
62A
156.125 156.125
Nothing comes close to a Cobra
®
VHF Marine
Channel Assignments
21
Channel Use
63 Public Correspondence (Marine Operator), Port Operations, Ship Movement
63A Port Operations and Commercial, VTS in selected areas
64 Public Correspondence (Marine Operator), Port Operations, Ship Movement
64A U.S. (Government Only); Canada (Commercial Fishing)
65 Public Correspondence (Marine Operator), Port Operations, Ship Movement
65A Port Operations
66 Public Correspondence (Marine Operator), Port Operations, Ship Movement
66A Port Operations
67 U.S. (Commercial). Used for bridge-to-bridge communications in lower
Mississippi River (Intership Only); Canada (Commercial Fishing), S&R
68 Non-Commercial (Recreational)
69 U.S. (Non-Commercial, Recreational); Canada (Commercial Fishing Only);
International (Intership, Port Operations, Ship Movement)
70 Digital Selective Calling (Voice communications not allowed)
71 U.S. and Canada (Non-Commercial, Recreational);
International (Port Operations, Ship Movement)
72 Non-Commercial (Intership Only)
73 U.S. (Port Operations); Canada (Commercial Fishing Only);
International (Intership, Port Operations, Ship Movement)
74 U.S. (Port Operations); Canada (Commercial Fishing Only);
International (Intership, Port Operations, Ship Movement)
77 Port Operations (Intership only). Restricted to communications
with pilots for movement and docking of ships.
VHF Marine Radio Protocols
Channel Channel Map Frequency Power
Number USA Int’l Canada Transmit Receive Limits
63
156.175 160.775
63A
156.175 156.175
64
••
156.225 160.825
64A
••
156.225 156.225
65
156.275 160.875
65A
••
156.275 156.275
66
156.325 160.925
66A
••
156.325 156.325 1 Watt CAN
67
••
156.375 156.375 1 Watt USA
68
••
156.425 156.425
69
••
156.475 156.475
70
••
RX only 156.525
71
156.575 156.575
72
••
156.625 156.625
73
••
156.675 156.675
74
••
156.725 156.725
77
••
156.875 156.875 1 Watt CAN
20
English
VHF Marine
Channel Assignments
VHF Marine Radio Protocols
Nothing comes close to a Cobra
®
VHF Marine
Channel Assignments
23
Channel Use
78 Public Correspondence (Marine Operator)
78A Non-Commercial (Recreational)
79 Port Operations, Ship Movement
79A Commercial (Also Non-Commercial only in Great Lakes)
80 Port Operations, Ship Movement
80A Commercial (Also Non-Commercial only in Great Lakes)
81 Port Operations, Ship Movement
81A U.S. (Government Only; Environmental Protection Operations)
82 Public Correspondence (Marine Operator), Port Operation, Ship Movement
82A U.S. (Government Only); Canada (Coast Guard Only)
83 Canada (Coast Guard Only)
83A U.S. (Government Only); Canada (Coast Guard Only)
84 Public Correspondence (Marine Operator)
84A Public Correspondence (Marine Operator)
85 Public Correspondence (Marine Operator)
85A Public Correspondence (Marine Operator)
86 Public Correspondence (Marine Operator)
86A Public Correspondence (Marine Operator)
87 Public Correspondence (Marine Operator)
87A Public Correspondence (Marine Operator)
88 Public Correspondence (Ship to Coast). In U.S. only within
75 miles of Canadian Border.
88A Commercial Intership only
NOTE
All channels are pre-programmed at the factory according to international
regulations and those of the FCC (U.S.A.) and Industry Canada (Canada).
They cannot be altered by the user nor can modes of operation be changed
between simplex and duplex.
VHF Marine Radio Protocols
Channel Channel Map Frequency Power
Number USA Int’l Canada Transmit Receive Limits
78
156.925 161.525
78A
••
156.925 156.925
79
156.975 161.575
79A
••
156.975 156.975
80
157.025 161.625
80A
••
157.025 157.025
81
157.075 161.675
81A
••
157.075 157.075
82
157.125 161.725
82A
••
157.125 157.125
83
••
157.175 161.775
83A
157.175 157.175
84
••
157.225 161.825
84A
157.225 157.225
85
••
157.275 161.875
85A
157.275 157.275
86
••
157.325 161.925
86A
157.325 157.325
87
157.375 161.975
87A
157.375 157.375
88
••
157.425 162.025
88A
157.425 157.425
NOTE
Many of the plain numbered channels, such as 01, 02, and 03, transmit and
receive on different frequencies. This is termed duplex operation. The rest of
the plain numbered channels and all of the A channels, such as 01A, 03A,
and 04A, transmit and receive on a single frequency, which is termed simplex
operation. Your radio automatically adjusts to these conditions. When in simplex
operation, the A icon will appear on the LCD (see illustration on page A2).
22
English
VHF Marine
Channel Assignments
VHF Marine Radio Protocols
Nothing comes close to a Cobra
®
NOAA Weather Channels
And Alert
25
NOAA Weather Channels And Alert
Monitoring the weather will probably be a frequent use of your radio. The National
Oceanic and Atmospheric Administration (NOAA) provides continuous, around-the-
clock broadcasts of the latest weather information. Taped weather messages run
every four (4) to six (6) minutes and are revised every two (2) or three (3) hours,
or as needed. The Coast Guard also announces weather and other safety warnings
on Channel 16 and DSC Channel 70. Smart boaters keep an eye on safety and an
ear to the radio — and never let the weather catch them unaware.
NOAA Emergency Weather Alert
In the event of a major storm or other weather condition requiring vessels at sea
or on other bodies of water to be notified, NOAA broadcasts a 1050 Hz tone that
receivers such as your CobraMarine
VHF radio can detect and warn you of a
weather alert condition. When the Weather Alert mode on your radio is On, this
signal will produce the weather alert alarm tone from the speaker and a “weather
alert” message on the LCD to signal that a weather alert is being broadcast.
The radio will automatically switch to
Weather Radio mode.
Test
To test this system, NOAA broadcasts the 1050 Hz signal every Wednesday sometime
between 11 a.m. and 1 p.m. in each local time zone. Any receiver that can detect the
weather alert tone may use this feature to verify that this feature is functioning properly.
Weather Frequency
Channel RX Frequency MHz
1 162.550
2 162.400
3 162.475
4 162.425
5 162.450
6 162.500
7 162.525
8 161.650
9 161.775
10 163.275
VHF Marine Radio Protocols
24
English
World City Time Zones
World City Time Zones
Longitudinal Zone Offset City
E172.50 to W172.50 -12 IDLW (International Date Line West)
W172.50 to W157.50 -11 Nome
W157.50 to W142.50 -10 Honolulu
W142.50 to W127.50 -9 Yukon STD
W127.50 to W112.50 -8 Los Angeles
W112.50 to W097.50 -7 Denver
W097.50 to W082.50 -6 Chicago
W082.50 to W067.50 -5 New York
W067.50 to W052.50 -4 Caracas
W052.50 to W037.50 -3 Rio de Janeiro
W037.50 to W022.50 -2 Fernando de Noronha
W022.50 to W007.50 -1 Azores Islands
W007.50 to E007.50 GMT +0 London
E007.50 to E022.50 +1 Rome
E022.50 to E037.50 +2 Cairo
E037.50 to E052.50 +3 Moscow
E052.50 to E067.50 +4 Abu Dhabi
E067.50 to E082.50 +5 Maldives
E082.50 to E097.50 +6 Dhuburi
E097.50 to E112.50 +7 Bangkok
E112.50 to E127.50 +8 Hong Kong
E127.50 to E142.50 +9 Tokyo
E142.50 to E157.50 +10 Sydney
E157.50 to E172.50 +11 Solomon Islands
E172.50 to W172.50 +12 Auckland
VHF Marine Radio Protocols
Nothing comes close to a Cobra
®
Mounting And
Powering The Radio
27
Installation And Start-Up
Mounting And Powering The Radio
Before using your CobraMarine
VHF radio, it must be installed on your vessel.
Installing Your Radio
Choose a location for your radio where it will be conveniently accessible with the
following factors in mind:
The leads to the battery and the antenna are best kept as short as possible.
The antenna must be mounted at least three (3) feet from the transceiver.
The radio and all speakers need to be far enough from any magnetic
compass to avoid deviation due to the speaker magnet.
There needs to be free air flow around the heat-sink fins on the back
of the transceiver.
Surface Mount
A Surface Mounting kit is included with your CobraMarine
VHF radio to allow its
installation on almost any flat surface.
To Mount The Transceiver
On Almost Any Flat Surface:
1.
Use the mounting bracket
as a template to drill holes
for the mounting screws.
2. Attach the mounting bracket
to the chosen surface.
3. Attach the transceiver to
the mounting bracket with
the locking knobs.
4. Tilt the transceiver to
a convenient angle and
tighten the locking knobs.
Surface Mounting Kit
Tilt Loc
k Knobs
26
English
Included In This Package
Installation And Start-Up
Included In This Package
You should find all of the following items in the
package with your CobraMarine
VHF radio:
Transceiver* Transceiver Flush Mount Kit
Microphone
Transceiver Surface Mount Kit
Operating Instruction Man
ual
Warning Sticker GPS Interface Cable
Microphone Mounting Kit
* The term transceiver will be used to identify the main unit containing the LCD screen and controls.
Radio will be used to identify the entire equipment including transceiver, microphone, antenna,
and any attached external speakers.
Nothing comes close to a Cobra
®
Mounting And
Powering The Radio
29
Warning Sticker
FCC regulations require that the Warning Sticker
supplied with this radio be applied to a spot where
it is easily seen by the radio operator. Be sure the
location is clean and dry before applying the sticker.
Electrical Power Connection
Your CobraMarine
VHF radio is
powered from the vessel’s 13.8-volt
negative ground direct current electrical
system (12 volt nominal). A fused power
connection lead is provided at the back
of the transceiver.
To Connect To A Power Source:
1. Attach the black power wire to a
negative ground.
2. Attach the fused red power wire to
the positive side of the power system.
CAUTION
A reverse polarity connection will damage the radio.
Installation And Start-Up
Power Connection Cables
Red Cable
Positive (+)
Black Cable
Negative (-)
– +
W
arning Sticker
Microphone Bracket
To Install The Microphone Bracket:
1.
Install the microphone bracket on a
vertical surface near the transceiver
using the supplied stainless steel screws.
Flush Mount
A Flush Mounting kit is included with your CobraMarine
VHF radio to allow its installation in almost any flat surface.
To Mount The Transceiver Flush In Almost Any Flat Surface:
1.
Use the supplied template to mark and cut an opening
in the flat surface. See page 71 for template.
CAUTION
Before cutting, be sure the area behind the flat
surface is clear of any instruments or wires that
might be damaged in the process.
2. Insert the transceiver into the opening.
3. Attach the mounting brackets to
the sides of the transceiver with
the adjusting screw flanges facing
the back of the flat surface.
4. Tighten the adjusting screws against
the back of the flat surface until the
flange on the front of the transceiver
is tight against the flat surface.
28
English
Installation And Start-Up
Mounting And
Powering The Radio
Use Supplied Template
See page 71
for template.
Insert Transceiver
Adjust Screws
Micr
ophone Bracket
Attach Mounting Brackets
Nothing comes close to a Cobra
®
Antenna Requirements
And Attachment
31
Installation And Start-Up
Radio Operator Requirements
Do not transmit when anyone is within the MPE radius of the antenna unless
that person or persons are shielded from the antenna by a grounded metallic
barrier. This is especially important on vessels with antennas mounted as
described in B where no one may be within 9' (2.8 m) horizontally from the
base of the antenna during transmissions.
FAILURE TO OBSERVE THE ABOVE LIMITS MAY EXPOSE THOSE WITHIN
THE MPE RADIUS TO RF ENERGY ABSORPTION IN EXCESS OF THE FCC
MAXIMUM PERMISSIBLE EXPOSURE. IT IS THE RADIO OPERATOR’S
RESPONSIBILITY TO INSURE THAT MPE LIMITS ARE HEEDED AND THAT
NO ONE IS WITHIN THE MPE RADIUS DURING TRANSMISSIONS.
Antenna Lead Attachment
Once the antenna is installed, the Coaxial Cable Lead can
be attached to the socket at the back of the transceiver.
CAUTION
Attempting to transmit without an antenna attached
will damage your CobraMarine
VHF radio.
Coaxial Cable Socket
30
English
Antenna Requirements
And Attachment
Installation And Start-Up
Antenna Requirements And Attachment
Antenna Requirements
Your CobraMarine
VHF radio requires an external marine antenna
to send signals into the air and to receive them. The radio is arranged
to use any of the popular marine VHF antennas, but it is up to you to
choose which antenna to use.
Since it represents the link between your radio and the outside world,
Cobra
®
suggests you purchase the best quality antenna, coaxial cable,
and connectors you can. This is best accomplished with the advice
and guidance of a knowledgeable dealer who can assess the variables
involved with your particular boat and preferences.
WARNING
Compliance with FCC requirements for Radio Frequency Exposure is
the responsibility of both the antenna installer and the radio operator.
Safe Maximum Permissible Exposure (MPE) Radius
To avoid health hazards from excessive exposure to RF energy, FCC OET
Bulletin 65 establishes an MPE radius of 10' (3 m) for the maximum power
of your radio with an antenna having a maximum power gain of 9 dBi.
This means that all persons must be at least 10' (3 m) away from the
antenna when the radio is transmitting.
Installation Requirements
A) An omnidirectional antenna with a gain not greater than 9 dBi must
be mounted at least 16.4' (5 m) above the highest deck where people
may be during radio transmissions, measured vertically from the lowest
point of the antenna. This provides the minimum separation distance
to comply with RF exposure requirements and is based on the MPE
radius of 10' (3 m) plus the 6.6' (2 m) height of an adult.
B) For vessels without structure to mount the antenna as described in A,
it must be mounted as follows AND all persons must be outside the
10' (3 m) MPE radius during radio transmissions. The antenna must
be mounted so that its lowest point is at least 3.3' (1 m) vertically above
the heads of all persons during radio transmissions.
Nothing comes close to a Cobra
®
External Devices
And Connections
33
Global Positioning System (GPS) Device (Not Included)
Cobra
®
strongly recommends that you obtain and connect a GPS device to
your CobraMarine
VHF radio. By having a GPS connected, your position will
be continuously indicated on the LCD and, most importantly, it will be included
automatically in any DSC distress message you may need to send. That will
take the “search” out of “search and rescue.”
To Install A GPS Device:
1.
Install the GPS device in a convenient location
according to its manufacturer’s directions.
2. Bond the NMEA out negative wire to the black
wire of the GPS interface cable.
3. Bond the NMEA out positive wire to the red
wire of the GPS interface cable.
NOTE
When bonding the wires, make sure connections
are secure and properly insulated.
4. Connect the new combination cable to the GPS
device and to the back of the transceiver.
NOTE
Satellite acquisition time is dependent on the
GPS device.
GPS Connection
Installation And Start-Up
32
English
External Devices
And Connections
External Devices And Connections
Your CobraMarine
VHF radio is set up to connect auxiliary devices for navigation,
convenience, and added versatility. As is the case with the antenna, choosing these
devices is best done with the advice and guidance of a knowledgeable dealer.
Standard connectors are provided on the front and back of the transceiver.
Microphone Attachment
Connect the Microphone to the cord socket located
at the right side of the front of the transceiver.
To Connect The Microphone Attachment:
1.
Align the connector and push it firmly into
the socket.
2. Tighten the captive nut to hold the connector
in place.
3. Slide the waterproof sleeve over the nut until it
seats in the recess around the socket.
External Speaker (Not Included)
An External Speaker can provide greater volume to
hear messages than the speaker incorporated in the
CobraMarine
transceiver.
To Install An External Speaker:
1.
Connect the speaker lead to the standard jack
on the back of the transceiver.
Micr
ophone Socket
External Speaker Jac
k
Installation And Start-Up
Nothing comes close to a Cobra
®
Getting Started
35
DSC Geographical Alarm
Loud, continuous, medium-pitched, high-low tones (warble) —
sounds when a geographical call is received. Press any button to turn it Off.
DSC Position Request Alarm
Medium-loud, continuous, low-pitched series of closely spaced, four (4) beeps
[three (3) short – one (1) long] groups — sounds when a position request call
is received. Press any button to turn it
Off.
DSC Individual Alarm
Medium-loud, continuous, medium-pitched, two (2) beep groups —
sounds when an individual call is received. Press any button to turn it Off.
Weather Alarm
Medium-loud, continuous, medium-pitched series of one-half (
1
2) second beeps
spaced one-half (
1
2) second apart — sounds when weather alert is turned On
and NOAA sends a 1050 Hz weather alert tone on the selected weather channel.
Press any button to turn it Off.
Power On-Off
Transceiver power can be turned On or Off by the On-Off Power/Volume
knob on the transceiver.
To Turn Your Radio On Or Off:
1.
Turn the On-Off Power/Volume knob on the
transceiver until you hear and feel a click.
When the radio is powered
On, the confirmation tone
will sound.
The radio will return to the settings in effect when it was
last powered Off, the LCD will show the corresponding
information, and all controls will be operative. The radio
will then be in
Standby mode.
Operating Your Radio
On-Off Power/
Volume Knob
34
English
Getting Started
Getting Started
Refer to the foldout on the front cover of this manual to identify the various
controls and indicators on your radio.
Throughout this manual you will be instructed to press or to press and hold
buttons on the transceiver or on the microphone. Press means a momentary
press, then release; press and hold means to hold the button down for three (3)
seconds or more.
Tones And Alarms
When your CobraMarine
VHF radio is On, you can expect to hear the following
tones and alarms. The volume of these sounds is controlled by the circuitry in the
radio and is not affected by the volume set with the
On-Off Power/Volume knob.
Confirmation Tone
Single high-pitched beep confirms all button presses except the Talk button.
It can be turned On or Off. See set-up routines on page 40.
Error Tone
Single low-pitched beep indicates an invalid button press.
DSC Distress Alarm
Loud, continuous, low-pitched series of closely spaced, three (3)
beep groups. Press any button to turn it Off. This alarm sounds for:
Distress call send, receive, and acknowledgement
Distress relay call received
All ships call received
NOTE
This alarm sounds only for DSC distress calls on Channel 70.
It does not sound for voice calls on Channel 16 — you still
must listen for those.
Operating Your Radio
Nothing comes close to a Cobra
®
Getting Started
37
Standby And Receive
Standby mode is the usual mode for the radio whenever it is turned On.
From Standby Mode,You Can:
Change your radio’s settings using set-up routines.
Receive messages on the current channel as well
as DSC messages.
Receive NOAA alerts if Weather Alert mode is turned On.
Switch to Transmit mode using the Talk button.
While the radio is in
Standby mode, the Receive mode is
entered whenever a strong enough signal to break squelch
is sent to the radio. You will hear the message through
whichever speakers are connected to the radio.
To Change The Channel You Are Listening To
You Can Choose One (1) Of The Following:
a.
Press the Up/Down buttons. This will take you to
the next higher or lower VHF channel. For rapid
advance, press and hold the
Up or Down button.
b. Press the Channel 16/9 button. This will take
you to Channel 16 with one (1) press and to Channel 9
with a second press. Additional presses will toggle
between Channels 16 and 9.
c. Press the Weather/UIC button. This will toggle the
radio between Standby mode and Weather Radio mode.
When in Weather Radio mode, the Up/Down buttons
will change the weather channel.
Standb
y Mode
Weather/UIC Button
Up/Down Buttons
Channel 16/9 Button
Operating Your Radio
36
English
Getting Started
Volume
The On-Off Power/Volume knob on the transceiver controls the speaker volume.
The volume adjustment applies only to what you hear from the speaker and does
not affect the volume of your outgoing messages. That is controlled by the circuitry
of your radio.
To Increase The Volume:
1.
Turn the On-Off Power/Volume knob clockwise.
To Decrease The Volume:
1.
Turn the On-Off Power/Volume knob
counter-clockwise.
Squelch
Squelch control filters weak signals and radio frequency noise so that you can more
clearly hear the signals you want. You can think of it as a variable barrier that blocks
what you don’t want to hear.
To Squelch Your Radio:
1.
With the Squelch knob turned fully counter-clockwise,
turn the On-Off/Volume knob clockwise until you hear
a hissing (noise) sound.
2. Turn the Squelch knob clockwise until the hissing
sound stops.
Turning the
Squelch knob further clockwise (higher bearier)
will filter weak and medium strength signals until only
the strongest signal can get through at the highest
squelch setting.
To Receive Weaker Signals:
1.
Turn the Squelch knob counterclockwise (lower bearier).
If the squelch is set so that you can hear a continuous
hissing sound, the scan and dual-watch functions will
be blocked.
Squelc
h Knob
Lower Bearier
Turn Until Hissing
Sound Stops
Turn Until Hissing
Sound Starts
On-Off Power/
Volume Knob
Operating Your Radio
Nothing comes close to a Cobra
®
Set-Up Routines
39
LCD Backlight
The LCD has a backlight lamp to make it visible in the dark.
This lamp can be adjusted for brightness or turned Off.
To Adjust The Backlight Level:
1.
Enter the Settings menu and scroll to LAMP ADJ
(lamp adjustment) with the Up/Down buttons.
2. Press the Call/Set button and observe the current
backlight setting — HIGH, MEDIUM, LOW or OFF.
3. Use the Up/Down buttons to switch to the setting you want.
4. Press the Call/Set button to select the backlight setting.
5. Use the Up/Down buttons to scroll to EXIT.
6. Press the Call/Set button to return to the Settings menu.
When the backlight is turned
On to any intensity,
the lamp will be lit whenever the radio is On.
LCD Contrast
The LCD backlight will not be visible in daylight, but the LCD Contrast
can be adjusted to make it easier to read in different light conditions.
To Change The Contrast:
1.
Enter the Settings menu and scroll to CONTRAST
with the Up/Down buttons.
2. Press the Call/Set button and observe the current
contrast setting — a number between one (1) and 16.
3. Use the Up/Down buttons to change the number
up or down.
4. Press the Call/Set button to select a contrast level.
5. Use the Up/Down buttons to scroll to EXIT.
6. Press the Call/Set button to return to the Settings menu.
Operating Your Radio
Lamp Adjustment
High/Medium/Low/Off
Contrast
Contrast Setting
38
English
Set-Up Routines
Set-Up Routines
Settings Menu
The Settings menu in the CobraMarine
VHF radio allows you to turn On and Off
many of its features, to adjust other features to suit your preferences, and to enter
your user MMSI number.
To Enter The Settings Menu:
1.
Press and hold the Call/Set button.
The Settings menu will appear on the LCD.
After entering the
Settings menu, you can scroll
through it to make as many entries as you like.
Whenever the setting selection arrow appears in
a feature portion of the menu, it will point to the
setting that was in effect when you entered the menu.
When you are finished with changes, you can exit
the
Settings menu and return to Standby mode.
To Exit The Settings Menu:
1.
Use the Up/Down buttons to scroll down to
EXIT at the bottom of the menu.
2. With the arrow pointing to EXIT, press the Call/Set
button to return the radio to Standby mode.
NOTE
Basic set-up routines are described here. For set-up
routines that apply specifically to a particular function,
they are included in the section for that function.
Operating Your Radio
Call/Set Button
Settings Menu
Exit
Up/Down Buttons
Nothing comes close to a Cobra
®
Set-Up Routines
41
U.S.A./International/Canada Channel Maps
Three (3) sets of VHF Channel Maps have been established for marine use in the
U.S.A., Canada, and the rest of the world (International). Most of the channels
are the same for all three (3) maps, but there are definite differences (see table
on pages 14 through 23). Your radio has all three (3) maps built into it and will
operate correctly in whichever area you choose.
To Set Your Radio For The Area In Which
You Will Be Using It:
1.
From Standby mode, press and hold the Weather/UIC
button. The radio will shift one (1) channel map and the
active channel map will show on the top line of the LCD.
2. Repeat step 1 to shift to the next channel map(s)
in the sequence USA, INT (International),
CAN (Canada) then back to USA.
The radio will return to
Standby mode each time the
button is released.
Operating Your Radio
Weather/UIC Button
Active Channel
Map
40
English
Set-Up Routines
Confirmation Tone
The Confirmation Tone sounds when your CobraMarine
VHF radio is turned On
and to confirm all button presses except for the Talk button. If you would prefer
not to hear the Confirmation Tone, you can turn it Off and On as you choose.
To Turn The Confirmation Tone On Or Off:
1.
Enter the Settings menu and scroll to KEY TONE
with the Up/Down buttons.
2. Press the Call/Set button and observe the current
confirmation tone setting — ON or OFF.
3. Use the Up/Down buttons to switch to the setting
you want.
4. Press the Call/Set button to select the setting.
5. Use the Up/Down buttons to scroll to EXIT.
6. Press the Call/Set button to return to the
Settings menu.
Time Offset
All VHF, DSC, and GPS activities use a 24-hour clock and Universal Coordinated
Time (UTC) which was formerly known as Greenwich Mean Time (GMT). Time Offset
uses your connected GPS to gather time inputs. For time inputs to be converted to
local time, you need to enter the hour offset of your local time zone from Greenwich.
(See world city time zone chart on page 24.)
To Change The Time Offset:
1.
Enter the Settings menu and scroll to TIME OFFST
(time offset) with the Up/Down buttons.
2. Press the Call/Set button and observe the current setting.
3. Use the Up/Down buttons to change to the setting for
your local time zone.
4. Press the Call/Set button to select the setting.
5. Use the Up/Down buttons to scroll to EXIT.
6. Press the Call/Set button to return to the Settings menu.
NOTE
If you leave the time offset at zero, the LCD will show
the time as UTC. If you enter the hour offset for your
time zone, the LCD will show the local time. In either
event, DSC messages will always be based on UTC.
Operating Your Radio
On/Off
Set
Time
Time Offset
Key Tone
43
Nothing
comes close to a Cobra
®
Voice Transmission
Operating Your Radio
Transmit Power Output
Your radio can Transmit selectively at one (1) or 25 watts of power. Cobra
®
suggests you maintain the low power setting for short-range communications
and to avoid overpowering nearby stations with your signal. Use the high power
setting for long-range communications or when you do not receive a response
to a signal sent at one (1) watt.
To Toggle Between The High And Low Power Modes:
1.
Press the High/Low Power button.
The LCD will show which mode is in effect.
Some channels are restricted to use at a maximum of
one (1) watt. Your radio will automatically set the power
to Low Power mode when you select those channels.
While using the U.S.A. channel map, if, in an emergency,
you need to increase the output power on Channel 13 and
Channel 67 for your signal to be heard, you can override
the Low Power mode by pressing and holding the High/
Low Power button.
Transmit A Message
To Transmit A Message:
1.
Check to see that your unit is set to a proper
channel for the type of message you plan to send.
2. Toggle to the low power setting.
3. With the microphone about two (2) inches [five (5) cm]
from your mouth, press and hold the Talk button and
speak into the microphone. Transmit will be indicated
on the LCD.
4. Release the Talk button when you are finished speaking.
Your unit can only operate in either the Transmit or the
Receive mode at any given time. You will not hear the
response to your message unless the Talk button is released.
NOTE
If the Talk button is held down for five (5) minutes,
the radio will automatically cease transmitting to
prevent unwanted signal generation. As soon as
the
Talk button is released, it can be pressed
again to resume transmission.
High/Low Power Button
Low Power Setting
Two (2) Inches
[Five (5) cm] From Mouth
Talk Button
T
ransmit Icon
High/Low Power
42
English
Voice Transmission
Voice Transmission
Transmit mode gives you the ability to communicate with safety services, other
vessels, and shore stations. When you use this capability, be sure to follow the
procedures and to observe the courtesies that govern its use so everyone benefits.
(The tables on pages 14 through 23 will help you select the proper channels.)
Before pressing the Talk button to transmit a message, you should select the
appropriate channel and transmit power output.
Channels
You can transmit voice messages on most VHF Channels. Refer to the VHF marine
channel assignments on pages 14 through 23 to select a channel according to the
type of message you are going to send.
To Change The Channel You Can Choose
From One (1) Of The Following:
a.
Press the Up/Down buttons. This will take you to the
next higher or lower VHF channel. (When on Channel
88A, the next higher channel is Channel 1 and vice
versa.) For rapid advance, press and hold the
Up or
Down buttons. (The confirmation tone will sound
only for each button press, not during rapid advance.)
b. Press the Channel 16/9 button. This will take you to
Channel 16 with one (1) press and to Channel 9 with
a second press. Additional presses will toggle between
Channel 16 and Channel 9. Press and hold the
Channel
16/9 button to return to Standby mode.
Operating Your Radio
Up/Down Buttons
Channel 16/9 Buttons
Nothing comes close to a Cobra
®
Advanced Operation
45
Weather Alert Signal
When NOAA broadcasts a Weather Alert signal and your radio is in the Weather
Alert mode, you will hear a continuous audible tone and the radio will automatically
switch to Weather Radio mode. The alert indicators will sound regardless of what
channel you are operating on as soon as a NOAA alert signal is received.
When You Hear The Alert:
1.
Press any key to turn Off the alert alarm and LCD indicator.
Advanced Operation
Cobra
®
has incorporated several features in your CobraMarine
VHF radio to give
you quick access to the voice calling channels and to let you monitor more than
one (1) channel at once.
Channel 16/9
This function gives you quick access to calling Channel 16 or Channel 9
from any operational mode.
To Switch To Channel 16 Or Channel 9:
1.
Press the Channel 16/9 button to change to Channel 16.
2. Press the Channel 16/9 button again to change to
Channel 9.
Additional presses of the
Channel 16/9 button will toggle
back and forth between the two (2) channels.
To exit the
Channel 16/9 mode and return to the previous
channel, press and hold the Channel 16/9 button.
While at Channel 16 or Channel 9 in the
Channel 16/9
mode, you can also press the Up/Down buttons to
change to other channels. In that event, another press
of the
Channel 16/9 button will switch your radio to
Channel 16 and the sequence will start over at step 1.
Operating Your Radio
Channel 16/9 Buttons
Channel 16/9 Toggle
44
English
Weather Radio And Alert
NOAA All Hazards/Weather Radio And Alert
NOAA broadcasts Weather information as described in the NOAA weather channels
section on page 25 of this manual. You can listen to one (1) or two (2) of these
ten (10) receive-only channels at any time.
NOTE
Usually only one (1) or two (2) of the weather channels will be operating in any
given location. You will need to select the channel with the strongest signal in
your location. This is the channel the radio will scan for the weather alert signal.
To Listen To The Weather Channels:
1.
From Standby mode, press the Weather/UIC
button. The unit will enter the Weather mode
and show it on the LCD.
2. Press the Up/Down buttons to change the
weather channels — hold the button for
fast advance.
To exit the Weather mode and return to
Standby mode, press the Weather/UIC
button again.
Weather Alert Set-Up
You must have Weather Alert mode turned On to benefit from the Weather Alert
condition signal described in the NOAA weather channels section on page 25.
To Turn Weather Alert On:
1.
Enter the Settings menu and scroll to WX ALERT
(weather alert) with the Up/Down buttons.
2. Press the Call/Set button and observe the current
setting — ON or OFF.
3. Use the Up/Down buttons to change to the setting.
4. Press the Call/Set button to select the setting.
5. Use the Up/Down buttons to scroll to EXIT.
6. Press the Call/Set button to return to the
Settings menu.
Operating Your Radio
W
eather/UIC Button
Weather Mode
On/Off
Weather Alert
Nothing comes close to a Cobra
®
Advanced Operation
47
Scan
During Scan, the radio will rapidly switch from channel
to channel through all the channels. Whenever any activity
is detected, the radio will stop the scan for ten (10) seconds
to allow you to listen briefly on that channel. It will then
continue to scan unless you switch out of the
Scan mode.
NOTE
The radio must be squelched for Scan mode to
function. See page 36 for squelch procedure.
To Enter Scan:
1.
From Standby mode, press the Scan button.
The radio will immediately begin to scan the entire channel
map selected in the active channel map.
SCAN will show
on the LCD.
To Exit Scan:
1.
From Scan mode, press the Scan button.
This will return the radio to Standby mode on the last
scanned channel.
During Scan (while receiving an incoming transmission),
You Can Choose From The Following:
a.
Press the Talk button to remain on that channel and end
scanning. This will return the radio to Standby mode.
b. Press the Up/Down buttons to resume scanning.
If you do not press any buttons within ten (10) seconds,
your radio will automatically resume scanning.
During Scan (while not receiving a transmission):
a.
Press the Talk button to communicate on the last
channel scanned and return to Standby mode.
Operating Your Radio
Scan Button
Scan
88
15
30
60
75
Scanning
46
English
Advanced Operation
Dual-Watch
Dual-Watch gives you one (1) button access to scan the two (2) locations of most
importance to you. Channel 16 will always be included as a scanned location. The
remaining location will be the VHF channel in effect when you enter
Dual-Watch mode.
NOTE
The radio must be squelched for dual-watch to function. See page 36
for squelch procedure.
To Enter Dual-Watch Mode:
1.
In Standby mode, use the Up/Down buttons to go
to the channel you want to add as the second location
to be scanned.
2. Press the Dual-Watch button.
Dual-watch will be indicated on the LCD and the radio
will scan between Channel 16 and the second dual-watch
location you selected. A signal on any one (1) of the two (2)
channels will stop the scan to allow you to listen to the traffic
on the channel. The channel number will be displayed on
the LCD.
To Exit Dual-Watch Mode:
1. Press the Dual-Watch button. The radio will
return to Standby mode.
During Dual-Watch (while receiving an incoming
transmission), You Can Choose From The Following:
a.
Press the Talk button to remain on that
dual-watch location and return to Standby mode.
b. Press the Up/Down buttons to resume scanning
dual-watch locations.
If you do not press any buttons, your radio will
automatically resume scanning dual-watch locations
when the incoming transmission is complete.
During Dual-Watch (while not receiving a transmission):
a.
Press the Talk button to communicate on the last
dual-watch location scanned and return to Standby mode.
Operating Your Radio
Dual-Watch Button
Standby Mode
Dual-Watch Mode
Nothing comes close to a Cobra
®
DSC Set-Up
49
To Enter Your MMSI Number:
1.
Enter the Settings menu and scroll to USER MMSI
with the Up/Down buttons.
2. Press the Call/Set button and the blinking cursor will
appear at the first digit under USER MMSI ID ENTRY.
3. Use the Up/Down buttons to scroll through the number
list to that digit of your number.
4. Press the Call/Set button to select the digit and the
blinking cursor will move to the next digit of the number.
5. Repeat steps 3 and 4 until all nine (9) digits of your
MMSI number are entered.
NOTE
Press the High/Low Power button to backspace
and erase the last selected number.
6. Check that you have entered the number correctly.
7. Press and hold the Call/Set button to return to the
Settings menu.
If You Incorrectly Enter Your MMSI Number
You can repeat steps 1 through 7 to correct it. HOWEVER,
YOU CAN DO THIS ONLY ONCE! A third attempt to enter
an MMSI number will result in an error message as shown.
Pressing the
Call/Set button from the error message
will return the radio to the Settings menu.
Once the error message appears, the radio will still
operate in all non-DSC modes. But you will have to
return the radio to Cobra
®
Electronics (see product
service on page 69 for details) for reset before you
can enter your MMSI number and use the radio in
DSC mode.
Because the MMSI number is so important to DSC
operation, this limitation is imposed on all DSC capable
radios to prevent constant changes and the potential
introduction of errors in the process. If, for any reason,
it is necessary to change the MMSI number in the radio
more than once, you can return it to Cobra
®
Electronics
for reset.
Operating Your Radio
User MMSI ID Entry
Err
or Messa
g
e
Call/Set Button
User MMSI
48
English
DSC Set-Up
DSC Set-Up
Digital selective calling — DSC — employs digital RF signals which tend to carry
further and be less susceptible to distortion from noise and atmospheric conditions
than analog ones. The result is greater range and more reliable message delivery
per watt of output power.
But, that is not the only advantage of DSC equipped radios. Those radios are set up
to interface with GPS and to automate many of the operations involved in sending
and receiving messages. That results in more compact and accurate messages and
less congestion of the airwaves.
The price of these benefits to the user is the time it takes to do the required set-up
to make the DSC features work. A little time spent when your radio is new will pay
dividends over its life.
These procedures use the
Settings menu. Refer to page 38 for information on
entering and exiting the
Settings menu.
User MMSI Number
This nine (9) digit number is similar to a telephone number in that it is a unique
identifier for you and your vessel. DSC uses this number in every message it
sends and receives. That is why your radio will not operate in the
DSC mode
until you enter your MMSI Number. You should enter it as soon as you receive
it from one (1) of the issuing agencies listed on page 9.
Operating Your Radio
Nothing comes close to a Cobra
®
DSC Set-Up
51
Group MMSI Number
Nautical organizations such as yacht clubs and the organizers of events
such as regattas can establish Group MMSIs. These allow a message to be
sent automatically to all members of the group without having to call each
one individually.
Each member of the group must enter the Group MMSI number in his radio
in order to receive group messages.
To Enter A Group MMSI Number:
1.
Enter the Settings menu and scroll to GROUP MMSI
with the Up/Down buttons.
2. Press the Call/Set button and the blinking cursor will
appear at the first digit under GROUP MMSI ID ENTRY.
3. Use the Up/Down buttons to scroll through the
number list to that digit of your number.
4. Press the Call/Set button to select the digit and the
blinking cursor will move to the next digit of the number.
5. Repeat steps 3 and 4 until all nine (9) digits of
the group MMSI number are entered.
NOTE
Press the High/Low Power button to backspace
and erase the last selected number.
6. Check that you have entered the number correctly.
7. Press and hold the Call/Set button to return
to the Settings menu.
The group MMSI is established by modifying the MMSI
assigned to one (1) of the group members. The last digit
of that member’s MMSI number is dropped and a zero (0)
is inserted at the beginning. For example, member MMSI
number 366123456 becomes group MMSI number
036612345.
Group MMSIs can be entered and changed any number
of times without encountering the need to have your
radio reset.
Group MMSI ID Entry
Operating Your Radio
Group MMSI
50
English
DSC Set-Up
If You Transfer Your Radio To A Different Vessel
Contact the MMSI issuing agency from which you obtained your number
and change the information associated with your number to correspond
to vessel in which it will be mounted.
To View Your MMSI Number At Any Time:
1.
Enter the Settings menu and scroll to
USER MMSI with the Up/Down buttons.
2. Press the Call/Set button and the blinking
cursor will appear at the first digit of your
already entered number under
USER MMSI
ID ENTRY
.
3. Press and hold the Call/Set button to
return to the Settings menu.
DSC Scanning
If you choose not to have your radio scan Channel 70,
you can turn DSC Scanning Off. If you do so, you can
still send DSC messages, but will not hear DSC alarms
nor receive DSC messages except when you are tuned
to Channel 70 or you have sent a distress message.
The acknowledgement to the distress message will
be received whether
DSC Scanning is On or Off.
To Turn DSC Scanning On Or Off:
1.
Enter the Settings menu and scroll to DSC SCAN
with the Up/Down buttons.
2. Press the Call/Set button and observe the current
setting —
ON or OFF.
3. Use the Up/Down buttons to select the setting
that you want.
4. Press the Call/Set button to return to the Settings menu.
Operating Your Radio
User MMSI ID Entry
On/Off
User MMSI
DSC Scan
Nothing comes close to a Cobra
®
DSC Set-Up
53
4. Press the Call/Set button to select the memory location.
The cursor will begin to blink at the first character under
NAME.
5. Use the Up/Down buttons to scroll through the character list.
6. Press the Call/Set button to select a character. This will also
move the blinking cursor to the next character under NAME.
7. Repeat steps 5 and 6 to enter additional characters —
up to a maximum of nine (9) — for the name.
NOTE
Press the High/Low Power button to backspace
and erase the last selected character.
8. After entering the name, press and hold the Call/Set
button to move the blinking cursor to the first character
under MMSI.
9. Use the Up/Down buttons to scroll through the number list.
10. Press the Call/Set button to select the number and
move the cursor to the next character under MMSI.
11. Repeat steps 9 and 10 until the nine (9) digit
MMSI is entered.
12. Press and hold the Call/Set button to move to the
next memory location or exit.
13. Select NEXT or EXIT with the Call/Set button.
If
NEXT is selected, pressing the Call/Set button will
move to the next memory location where another
name can be entered by repeating steps 3 through 11.
If EXIT is selected, pressing the Call/Set button
will return you to the Settings menu.
You can enter a total of ten (10) names and MMSI
numbers in the directory.
Enter MMSI
Operating Your Radio
Ne
w Individual
Next/Exit
Position Request Reply Type
The ability to send your position to another station is an added feature of DSC
radios that have GPS attached. It is handy for rendezvous and rescue situations.
Your CobraMarine
VHF radio allows you to choose whether to have the radio
automatically respond to all Position Requests it receives or to alert you to a
Position Request and allow you to choose whether to respond or not —
manual reply.
To Set The Position Request Reply Type:
1.
Enter the Settings menu and scroll to
POS RPLY (position reply) with the
Up/Down buttons.
2. Press the Call/Set button and observe
the current setting — AUTO or MANUAL.
3. Use the Up/Down buttons to change the setting.
4. Press the Call/Set button to select the setting.
5. Use the Up/Down buttons to scroll to EXIT.
6. Press the Call/Set button to return to the
Settings menu.
Individual Directory
DSC calling allows you to call another vessel or station directly if you know its
MMSI number. Your CobraMarine
VHF radio allows you to store up to ten (10)
names and their associated MMSI numbers for quick access.
To Enter Or Edit Names And MMSI Numbers
In The Directory:
1.
Enter the Settings menu and scroll to INDV DIR
(individual directory) with the Up/Down buttons.
2. Press the Call/Set button to enter a
memory location (1-10).
3. Use the Up/Down buttons to scroll through the
memory locations to one you want to select.
52
English
DSC Set-Up
Operating Your Radio
Auto/Manual/Exit
Position Reply
Location 01
Individual Directory
2. Choose one (1) of the following:
a. To Send An Automatic Distress Call:
1)
Press and hold the Distress button.
b. To Send A Manual Distress Call:
1)
Use the Up/Down buttons to move the arrow
to MANUAL.
2) Press the Call/Set button to go to the position
entry screen.
3) Use the Up/Down buttons to manually set the
position of your vessel.
4) Press the Call/Set button to send the message.
5) Press and hold the Distress button.
c. To Abort The Distress Call Process:
If you pressed the Distress button by mistake or
if you have not received an acknowledgement and
want to discontinue the automatic resending of
your distress message:
1) Use the Up/Down buttons to move the arrow to EXIT.
2) Press the Call/Set button to return to Standby mode.
The distress alarm will sound to let you know that the
message is being sent. At the end of the transmission,
the radio will maintain a watch on Channels 16 and
Channel 70 for an acknowledgement. Press any button
to turn Off the alarm and return to Standby mode.
If an acknowledgement is received, the distress
alarm will sound again and the responding party’s
MMSI number will show on the LCD.
If no acknowledgement is received, the radio will
resend the message at approximately four (4) minute
intervals until an acknowledgement is received or
you abort the distress call.
Nothing comes close to a Cobra
®
DSC Operation
55
Distress
Acknowledgement
Operating Your Radio
Distress Waiting
Manual
Distress Button
P
osition Entry Screen
Exit
T
ransmit USA High
54
English
DSC Operation
DSC Operation
Sending DSC calls is done from menus similar to the Settings menu. Whereas
entering the Settings menu required a press and hold of the Call/Set button,
the sending menus appear with a press of the Distress button.
All received DSC calls will sound one (1) or another of the alarms to alert you to them.
See pages 34 through 35 for descriptions of the different alarms. Pressing any button
will turn Off the alarm while maintaining the received call information on the LCD.
Sending Distress Calls
The ability to send and receive Distress calls and their acknowledgements
on Channel 70 can literally be a lifesaver for you or another mariner.
NOTE
The DSC call will:
Sound the distress alarm at all receiving stations.
Inform receiving stations of your identity (MMSI).
Inform receiving stations of your position if you have a GPS
device connected or you have manually entered your position.
It will not provide the receiving stations with other distress information
such as the nature of your problem, number of persons aboard, injuries,
or the like. For that, you will have to communicate by voice on Channel 16
with the station that acknowledges your DSC distress call.
To Begin Sending A DSC Distress Call:
1.
From Standby mode, lift the spring-loaded red door on
the transceiver and press the
Distress button under it.
This will open the Distress menu with the arrow
pointing to SEND. You will have three (3) choices:
Send the distress call automatically with either
no position information if a GPS is not connected
or with the position provided by a connected GPS.
Manually enter your position, then send the
distress call.
Abort the distress call process and return to
Standby mode.
Operating Your Radio
Distress Button
Send/Manual/Exit
Nothing comes close to a Cobra
®
DSC Operation
57
Sending An All Ships Calls
A DSC All Ships call is used for the same urgency and safety purposes as the Pan
and Securite voice calls as well as to send routine messages to all stations at once.
It will reach all stations within range of your radio. If you have an urgent, but not
life-threatening, situation or a safety warning to broadcast to all vessels in your
area, this is the type of call to use. It should be used judiciously for routine calls.
To Send An All Ships Call:
1.
In Standby mode, select a channel on which you want
to communicate for a routine call. (The radio will use
Channel 16 for urgent and safety calls.)
2. Press the Call/Set button to enter the Call Send menu.
3. Use the Up/Down buttons to scroll to ALL SHIPS.
4. Press the Call/Set button to move to the message
type menu.
5. Use the Up/Down buttons to select a message type
URGENCY, SAFETY or ROUTINE.
6. Press the Call/Set button to send the message.
7. Depending on the type of message you chose,
the radio will automatically switch to a voice channel.
a. After urgency and safety calls, the radio will switch
to Channel 16 and wait for you to press the Talk button
to send the urgent or safety message by voice.
b. After a routine call, the radio will switch to the channel
you selected in step 1 and wait for you to press the
Talk button to send the routine message by voice.
DSC equipped radios that receive your message will be
automatically switched to Channel 16 or the channel you
selected to hear your voice message.
To return to
Standby mode without sending a message,
use the Up/Down buttons to scroll to EXIT and
press the Call/Set button.
All Ships
Standby Mode
Ur
gency/Safety/Routine
Operating Your Radio
Urgency Waiting
Routine Waiting
56
English
DSC Operation
Receiving Distress Calls
If your vessel is within range of a DSC Distress call, the radio will
receive the call, sound the distress alarm, and switch to Channel 16.
When A Distress Call Is Heard:
1.
Press any button to turn Off the alarm and return
to Standby mode.
2. Read and write down the distress information on the
LCD (there may or may not be position data shown),
then determine whether you should answer the call.
3. Respond, if appropriate, by pressing and holding
the Talk button to transmit on Channel 16.
NOTE
Your radio will automatically switch to Channel 16
upon receiving a DSC distress call.
Regarding Distress Relay Calls
Your radio cannot send Distress Relay calls. Only large ships and
shore stations with specially equipped radios can send these calls.
Receiving Distress Relay Calls
Your radio will respond to a received Distress Relay call in the same way
as it will to a distress call.
Operating Your Radio
Distress Inf
o on LCD
Distress Info on LCD
Nothing comes close to a Cobra
®
DSC Operation
59
Sending An Individual Call
The DSC Individual call feature allows you to notify one (1), and only one (1),
station that you want to communicate with that station. It does not alert all
other stations within range that you will be sending a message as a voice
call on Channel 16 or Channel 9 would.
To Send An Individual Call:
1.
In Standby mode, select a channel on which you
want to communicate.
2. Press the Call/Set button to enter the Call Send menu.
3. Use the Up/Down buttons to scroll to INDIVIDUAL.
4. Press the Call/Set button to move to the individual directory.
5. Use the Up/Down buttons to select the name you
want to call from the directory.
6. Press the Call/Set button to send the message or
return to Standby mode if EXIT was chosen.
If the radio you are calling sends back an automatic DSC
response of “able to comply,” the individual alarm will sound.
Wait for a voice message from the called station.
If the called radio does not send an “able to comply”
response, your radio will wait eight (8) seconds and
resend the message.
If an “unable to comply” response or no reply is received,
your radio will go to the
Unavailable menu.
At the
Unavailable menu, you can choose SEND or
EXIT with the Up/Down buttons. If you choose SEND,
your radio will restart the individual call. If you choose
EXIT, you will be returned to the individual location
on the Call Send menu.
Individual
Standby Mode
Select Name
Send/Exit
Operating Your Radio
Individual Waiting
58
English
DSC Operation
Receiving An All Ships Call
All Ships calls sent by stations within range of your radio will sound
the distress alarm on your radio and switch your radio to Channel 16.
When An All Ships Call Is Heard:
1.
Press any button to turn Off the alarm and return to
Standby mode.
2. Read and write down the MMSI of the vessel sending
the call as well as the date and time of the call in case
you will want to respond.
3. Listen to the voice message sent on the channel your
radio was switched to by the incoming all ships call.
Sending A Geographical Call
Your radio cannot send Geographical calls. Only large ships and shore
stations with specially equipped radios can send these calls.
Receiving A Geographical Call
Geographical calls are sent by specially equipped radios to all stations in a
particular geographical area to alert only those stations of the call and not
stations in unaffected areas. If you are in an area to which a
Geographical
call is made, it will sound the geographical alarm on your radio and switch
your radio to the channel chosen by the sending station.
When A Geographical Call Is Heard:
1.
Press any button to turn Off the alarm.
2. Read and write down the MMSI of the vessel
sending the call as well as the date and time
of the call in case you will want to respond.
3. Listen to the voice message sent on the channel your
radio was switched to by the incoming geographical call.
4. Press one (1) of the following three (3) buttons to
switch from geographical call receive to Standby mode:
Call/Set button, Channel 16/9 button, or Talk button.
Operating Your Radio
All Ships Call
Geographical Call
Nothing comes close to a Cobra
®
DSC Operation
61
Receiving A Group Call
When another station makes a Group call to your radio, the individual alarm
will sound, the caller will be identified on the LCD, and your radio will be
switched to the channel selected by the caller, just as for an individual call.
Press any button to turn
Off the alarm.
To Receive A Group Call:
1.
Listen for the group voice message.
2. Press the Talk button and respond
only if appropriate.
Sending A Position Request
Position Request mode enables a DSC radio to obtain the position
(latitude and longitude) of a station that has a GPS device connected
to the DSC radio at that station.
To Request The Position Of Another Station:
1.
In Standby mode, select a channel on which
you want to communicate.
2. Press the Call/Set button to enter the
Call Send menu.
3. Use the Up/Down buttons to scroll to
POS REQST (position request) on
the menu.
4. Press the Call/Set button to enter the
Individual Directory menu.
5. Use the Up/Down buttons to scroll to the
name of the station whose position you
want to request.
Caller Identified
Standby Mode
Operating Your Radio
Individual Directory
Position Request
60
English
DSC Operation
Receiving An Individual Call
When another station makes an Individual call to your radio,
the individual alarm will sound, the caller will be identified
on the LCD, and your radio will be switched to the channel
selected by the caller. Press any button to turn
Off the alarm.
To Receive An Individual Call:
1.
Press the Talk button and greet the caller —
almost as if you were answering the telephone.
Sending A Group Call
Sending a Group call is very similar to sending an individual call, except that
the group MMSI is used and the resend and DSC responses do not apply.
To Send A Group Call:
1.
In Standby mode, select a channel on which you want
to communicate.
2. Press the Call/Set button to enter the Call Send menu.
3. Use the Up/Down buttons to scroll to GROUP.
4. Press the Call/Set button to move to the send
or exit menu.
5. Use the Up/Down buttons to select SEND or EXIT.
6. Press the Call/Set button to send the message or
return to the Call Send menu if EXIT was chosen.
All radios will be switched to the channel selected in
step 1. Press and hold the
Talk button to send your
voice message to everyone in the group.
Anyone in the group can now also transmit on
that channel.
Operating Your Radio
Caller Identified
Gr
oup
Group Waiting
Send/Exit
Standby Mode
Nothing comes close to a Cobra
®
DSC Operation
63
c. If The Station You Called Chose Not To Reply:
NO REPLY will show on your screen.
You will have two (2) choices:
RESEND the request.
EXIT the Position Request mode.
a. To Resend Your Position Request:
1)
Use the Up/Down buttons to scroll to RESEND.
2) Press the Call/Set button.
b. To Exit The Position Request Mode:
1)
Use the Up/Down buttons to scroll to EXIT.
2) Press the Call/Set button to return to the
Individual Directory menu.
3) Use the Up/Down buttons to scroll to EXIT.
4) Press the Call/Set button to return to the
Call Send menu.
5) Use the Up/Down buttons to scroll to EXIT.
6) Press the Call/Set button to return to
Standby mode.
Resend The Request
Operating Your Radio
62
English
DSC Operation
6. Press the Call/Set button.
Your radio will send the position request and there
will be one (1) of three (3) possible responses:
You will receive the position.
You will receive a no position data response,
meaning the station you queried is not connected
to a GPS device and cannot send its position.
You will receive a no reply response, meaning the
operator of that station has chosen not to reply
to your request.
Choose one (1) of the following:
a. If You Receive A Position:
The requested position with the station name
and MMSI will show on your screen.
1) Press the Call/Set button to return to Standby
mode after you have noted the station’s position.
b. If The Station You Called Cannot Send Its Position:
NO POS DATA (no position data) will show
on your screen.
1) Press the Call/Set button to return to the
Individual Directory menu.
2) Use the Up/Down buttons to scroll to EXIT.
3) Press the Call/Set button to return to the
Call Send menu.
4) Use the Up/Down buttons to scroll to EXIT.
5) Press the Call/Set button to return to
Standby mode.
Operating Your Radio
Receiving a Position
No Position Data
Position Request
Nothing comes close to a Cobra
®
DSC Operation
65
Sending A Position Send
Position Send uses your connected GPS in similar
fashion to the position request function, except that
you initiate the activity to let another station know
where you are.
To Send A Position Send Message:
1.
In Standby mode, select a channel on which you want
to communicate.
2. Press the Call/Set button to enter the Call Send menu.
3. Use the Up/Down buttons to scroll to POS SEND
(position send).
4. Press the Call/Set button to enter the individual directory.
5. Use the Up/Down buttons to select the station
to which you want to send your position.
6. Press the Call/Set button to send your position.
After your position is sent, the LCD will show
POS SEND
(position send). You will have two (2) choices.
Resend your position to the same station.
Exit from Position Send mode.
a. To Resend Your Position:
1)
Use the Up/Down buttons to select SEND.
2) Press the Call/Set button to resend your position.
b. To Exit From The Position Send Mode:
1)
Use the Up/Down buttons to select EXIT.
2) Press the Call/Set button to return to the
Call Send menu.
Receiving A Position Send
When another station sends you its position in Position
Send mode, the individual alarm will sound and the station’s
name and position will be shown on the LCD. Press any
button to turn
Off the alarm and return to Standby mode.
Operating Your Radio
Transmit Position
Send/Exit
Position Send
Standb
y Mode
Individual Directory
P
osition Send
64
English
DSC Operation
Receiving A Position Request
When you went through the DSC set-up process, you set a position request reply
type. (See page 52 to change your setting.) Depending on the setting you chose,
when a
Position Request message is received, your radio will enter either:
The Auto Reply mode.
The Manual Reply mode.
When The Radio Is In Auto Reply Mode:
A position request will sound the position request
alarm and show the name of the requesting station
on the LCD. Your radio will automatically respond.
It will send your position, if you have a GPS connected
to your radio, or
NO POS DATA (no position data),
if you do not have a GPS device connected.
1. Press any button to silence the alarm and
exit the display.
When The Radio Is In The Manual Reply Mode:
A position request message will sound the position
request alarm and show the name of the requesting
station. You can choose to:
Reply and send your position.
Exit without sending your position.
a. If You Choose To Reply With Your Position:
1)
Use the Up/Down buttons to select REPLY.
2) Press the Call/Set button to send your position.
3) Press any button to return to Standby mode.
b. If You Choose Not To Reply:
1)
Use the Up/Down buttons to select EXIT.
2) Press the Call/Set button to return to Standby
mode without sending your position.
Operating Your Radio
Position Request
P
osition Request
Reply/Exit
Nothing comes close to a Cobra
®
Specifications
67
Specifications
General
Number of Channels All U.S.A., Canadian, and International
10 NOAA Weather Channels
Channel Spacing 25 kHz
Modulation 5 kHz Max.
Input Voltage 13.8 VDC
Current Drain:
Stand-by 20 mA
Receive 200 mA
Transmit 5A @ High power 1A @ Low
Temperature Range -20˚ C to 60˚ C
Unit Dimensions 6.25" x 2.25" x 7.125"
(15.9 cm x 5.7 cm x 18 cm)
Unit Weight 2 lbs., 6.8 oz. (1100 g)
Receiver
Frequency Range 156.050 to 163.275 MHz
Receiver Type Double Conversion Super-Heterodyne
Sensitivity:
20 dB Quieting 0.35 uV
12 dB Sinad 0.30 uV
Adjacent Channel Selectivity -60 dB
Intermodulation and Rejection -60 dB
Spurious and Image Rejection -60 dB
AF Output 4 Watts @ 8 Ohms
Transmitter
Frequency Range: TX 156.025 to 157.425 MHz
RF Output Power 1 and 25 Watts
Spurious Emissions -60 dB High -55 dB Low
Microphone Type Electret
Frequency Stability +/-10 ppm
FM Hum and Noise 40 dB
Operating Your Radio
66
English
Maintenance And
Troubleshooting
Operating Your Radio
No display on LCD when
radio is turned On
Improper power
connection
Insure power connections
are proper and secure
Will transmit at
one (1) watt, but not
at 25 watts
Selected channel is
limited to one (1) watt
Switch to
another channel
Will not transmit Selected channel is
limited to receive only
Switch to
another channel
No sound from speaker Volume level is too low or
squelch level is too deep
Readjust volume
and squelch
No answer to calls Out of range of
other station
Signal is blocked
by terrain
Switch to high power
(25 watts) or move closer
Move until you have
a “line-of-sight” to
the other station
DSC distress
cannot be sent
MMSI
(DSC self-identification)
number is not entered
Enter your MMSI number
Problem Possible Cause(s) Solution(s)
Maintenance
Very little maintenance is required to keep your CobraMarine
VHF radio in good
operating condition.
Keep the radio clean by wiping with a soft cloth and mild detergent.
Rinse with fresh water. Do not use solvents or harsh or abrasive cleaners,
which could damage the case or scratch the LCD screen.
If the radio is exposed to salt water, rinse it in fresh water at least once
a day to prevent build-up of salt deposits, which could interfere with
button operation.
Troubleshooting
Nothing comes close to a Cobra
®
Product Service
69
Product Service
If you have any questions about operation or installing your
new CobraMarine
VHF product, or if you are missing parts…
Please call Cobra
®
first! DO NOT RETURN THIS PRODUCT TO THE STORE!
See customer assistance on page A1.
If your product should require factory service, please call Cobra
®
first before sending
your radio. This will ensure the fastest turn-around time on your repair. You may be
asked to send your radio to the Cobra
®
factory. It will be necessary to furnish the
following to have the product serviced and returned:
1. For warranty repair include some form of proof-of-purchase, such as a
mechanical reproduction or carbon of a sales receipt. If you send the original
receipt, it cannot be returned.
2. Send the entire product.
3. Enclose a description of what is happening with the radio. Include a typed
or clearly printed name and address of where the radio is to be returned.
4. Pack radio securely to prevent damage in transit. If possible, use the
original packing material.
5. Ship prepaid and insured by way of a traceable carrier such as United Parcel
Service (UPS) or Priority Mail to avoid loss in transit to: Cobra
®
Factory Service,
Cobra
®
Electronics Corporation, 6500 West Cortland Street, Chicago, Illinois
60707 U.S.A.
6. If the radio is in warranty, upon receipt of your radio it will either be repaired
or exchanged depending on the model. Please allow approximately three (3)
to four (4) weeks before contacting Cobra
®
for status. If the radio is out of
warranty, a letter will automatically be sent informing you of the repair
charge or replacement charge.
If you have any questions, please call 773-889-3087 for assistance.
Customer Service
68
English
Warranty
Warranty
Limited 3-Year Warranty
For Products Purchased In The U.S.A.
Cobra
®
Electronics Corporation warrants that its CobraMarine
VHF radio, and the
component parts thereof, will be free of defects in workmanship and materials
for a period of three (3) years from the date of first consumer purchase. This
warranty may be enforced by the first consumer purchaser, provided that the
product is utilized within the U.S.A.
Cobra
®
will, without charge, repair or replace, at its option, defective radios,
products or component parts upon delivery to the Cobra
®
Factory Service
department, accompanied by proof of the date of first consumer purchase,
such as a duplicated copy of a sales receipt.
You must pay any initial shipping charges required to ship the product for warranty
service, but the return charges will be at Cobra
®
s expense, if the product is repaired
or replaced under warranty. This warranty gives you specific legal rights, and you
may also have other rights which may vary from state to state.
Exclusions: This limited warranty does not apply:
1.
To any product damaged by accident.
2. In the event of misuse or abuse of the product or as a result
of unauthorized alterations or repairs.
3. If the serial number has been altered, defaced, or removed.
4. If the owner of the product resides outside the U.S.A.
All implied warranties, including warranties of merchantability and fitness for a
particular purpose are limited in duration to the length of this warranty. Cobra
®
shall not be liable for any incidental, consequential or other damages; including,
without limitation, damages resulting from loss of use or cost of installation.
Some states do not allow limitations on how long an implied warranty lasts and/or
do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitations may not apply to you.
For Products Purchased Outside The U.S.A.
Please contact your local dealer for warranty information.
Flush Mount Template / Plantilla para montaje empotrado
Customer Service
Nothing comes close to a Cobr
a
®
71
Use the supplied template to mark and cut an opening in the flat surface.
CAUTION
Before cutting, be sure the area behind the flat surface is clear of any
instruments or wires that might be damaged in the process.
Use la plantilla suministrada para marcar y cortar el agujero en la superficie plana.
PRECAUCIÓN
Antes de cortar, compruebe que no haya instrumentos o cables en el área
detrás de la superficie plana, que puedan resultar dañados durante el proceso.
70
English
Order Form And
Optional Accessories
Customer Service
Optional Accessories
You can find quality Cobra
®
products and accessories at
your local Cobra
®
dealer, or in the U.S.A., you can order
directly from Cobra
®
.
Ordering From U.S.A.
Call 773-889-3087 for pricing or visit www.cobra.com.
For credit card orders, complete and return this order
form to fax number 773-622-2269. Or call 773-889-3087
(Press 1 from the main menu) 8:00 a.m. to 6:00 p.m. CT,
Monday through Friday.
Make check or money order payable to:
Cobra
®
Electronics, Attn: Accessories Dept.
6500 West Cortland Street, Chicago, IL 60707 USA
To order online, please visit our website: www.cobra.com
The Cobra
®
line of quality
products includes:
CB Radios
microTALK
®
Radios
Radar/Laser Detectors
Safety Alert
®
Traffic
Warning Systems
Accessories
GPS (Global
Positioning System)
HighGear
®
Accessories
VHF Marine Radios
Power Inverters
Order Form
Name
Address (No P.O. Boxes)
City State/Province Zip Country
Telephone
Credit Card Number Type: Visa MasterCard Discover Exp. Date
Customer Signature
Item # U.S.Cost Each Qty Amount
U.S. Subtotal
(T
ax if Applicable)
Shipping/Handling
Total
Amount Shipping/Handling*
$10.00 or less . . . . . $3.00
$10.01-$25.00 . . . . . $5.50
$25.01-$50.00
. . . . . $7.50
$50.01-$90.00 . . . . $10.50
$90.01-$130.00 . . . $13.50
$130.01-$200.00 . . $16.50
$200.01 plus
. . . . .
10% of
purchase
*For AK, HI and PR add
additional $26.95 for FedEx
Next Day or $10.95 for
FedEx 2nd Day. Excludes
weekend and holiday
shipments.
Please allow 2-3 weeks
for deliver
y in the U.S.
Prices subject to change
without notice.
Tax Table
Wisconsin add 5%
Indiana, Ohio, Michigan add 6%
California add 7.25%
Illinois add 8.75%
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cobra MR F55 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cobra MR F55 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info