Handleiding Cobra CXT 135 (pagina 1 van 1) (Engels)

538281

Verklein

Vergroot

Pagina terug

1/1

Pagina verder

User’s Guide

TWO-WAY RADIO MODEL

CXT135

NOTE The receiver for these two-way radios and the external

power supply for charging comply with part 15 of the FCC Rules.

Operation is subject to the following two (2) conditions: (1) This

device may not cause harmful interference, and (2) this device

must accept any interference received, including interference

that may cause undesired operation.

FCC Warnings: Replacement or substitution of transistors, regular

diodes or other parts of a unique nature, with parts other than

those recommended by Cobra may cause a violation of the

technical regulations of part 95 of the FCC rules, or violation of

type acceptance requirements of part 2 of the rules.

Making Life Easier

And Safer

Staying in touch with your family and

friends is convenient and easy when using

your microTALK

radio. Some of the many

uses you will discover include:

Communicating with others while hiking, biking,

and working; keeping track of family and friends

at a crowded public event; checking with travel companions

in another car; talking with neighbors; arranging meeting

spots with others while shopping at the mall.

Customer Assistance

In this user’s guide, you should find all the information you need to operate your microTALK

radio. If you require

further assistance after reading this guide, Cobra Electronics offers the following customer assistance services:

For Assistance In The U.S.A.

Automated Help Desk English only.

24 hours a day, 7 days a week 773-889-3087 (phone).

Customer Assistance Operators English and Spanish.

8:00 a.m. to 5:30 p.m. Central Time, Monday through

Friday (except holidays) 773-889-3087 (phone).

Questions English and Spanish.

Faxes can be received at 773-622-2269 (fax).

Up/Down Buttons

While in mode function, press

and release to change channels.

Press and release to adjust

the volume.

Call Button

Press and release to alert others that

you are calling. This tone is used only

to establish voice communications.

Printed in China Part No. 480-737-P Version C

Battery

Compartment

Cover

Belt Clip

Antenna

Talk Button

Press and hold to communicate with

others. With the microphone about two

(2) inches [five (5) cm] from your mouth,

speak in a normal voice.

Release the Talk button when you are

finished talking and listen for a response.

You cannot receive incoming calls while

pressing the Talk button.

NOTE Both radios must be

tuned to the same channel

to communicate.

IMPORTANT NOTICE: FCC LICENSE REQUIRED

This two-way radio operates on GMRS (General Mobile Radio Service) frequencies

which require an FCC (Federal Communications Commission) license. A user must be

licensed prior to operating on Channels 1 through 7 or 15 through 22, which comprise the

GMRS channels of this radio. which comprise the GMRS channels of this radio. Serious

penalties could result for unlicensed use of GMRS channels, in violation of FCC rules.

Operation of this radio is subject to additional rules specified in 47 C.F.R. Part 95.

Licensed users will be issued a call sign by the FCC, which should be used for

station identification when operating this radio. GMRS users should also cooperate

by engaging in permissible transmissions only, avoiding channel interference with other

GMRS users, and being prudent with the length of their transmission time.

For licensing information and application forms, please call the FCC Hotline at

800-418-FORM. Request form #159 and form #605. Questions regarding the

license application should be directed to the FCC at 888-CALL-FCC. Additional information is

available on the FCC’s website at www.fcc.gov.

Safety Information For microTALK

Radios

Your wireless handheld portable transceiver contains a low power transmitter.

When the Talk button is pushed, it sends out radio frequency (RF) signals.

The device is authorized to operate at a duty factor not to exceed 50%.

In August 1996, the Federal Communications Commissions (FCC) adopted

RF exposure guidelines with safety levels for handheld wireless devices.

Important:

FCC RF Exposure Requirements: For body-worn operation, this radio has

been tested and meets the FCC RF exposure guidelines when used with Cobra accessories

supplied or designated for this product. Use of other accessories

may not ensure compliance with FCC RF exposure guidelines. Use only the

supplied antenna. Unauthorized antennas, modifications, or attachments

could damage the transmitter and may violate FCC regulations.

Normal Position:

Hold the transmitter approximately two (2) inches from your face and

speak in a normal voice, with the antenna pointed up and away.

Product Service Questions

If you have any questions about operation or installing your new Cobra product,

or if you are missing parts…

Please call Cobra first! DO NOT RETURN THIS PRODUCT TO THE STORE!

See customer assistance above.

For Products Purchased In The U.S.A.

If your product should require factory service, please call Cobra first before

sending your radio, charger or battery pack(s). This will ensure the fastest turn-

around time on your repair. You may be asked to send your products to the Cobra factory. It

will be necessary to furnish the following to have the product serviced

and returned. 1) For warranty repair include some form of proof-of-purchase,

such as a mechanical reproduction or carbon of a sales receipt. If you send the

original receipt, it cannot be returned. 2) Send the entire product. 3) Enclose

a description of what is happening with the product. Include a typed or clearly

printed name and address of where the product is to be returned. 4) Pack product securely

to prevent damage in transit. If possible, use the original packing material.

5) Ship prepaid and insured by way of a traceable carrier such as United Parcel

Service (UPS) or First Class Mail to avoid loss in transit to:

Cobra Factory Service

Cobra Electronics Corporation

6500 West Cortland Street

Chicago, Illinois 60707 U.S.A.

6) If the product is in warranty, upon receipt of your product it will either be

repaired or exchanged depending on the model.

Please allow approximately three (3) to four (4) weeks before contacting Cobra

for status. If the product is out of warranty, a letter will automatically be sent

informing you of the repair charge or replacement charge. If you have any

questions, please call 773-889-3087 for assistance.

For Products Purchased Outside The U.S.A.

Please contact your local dealer for product service information.

Limited 1-Year Warranty On Radio(s)

For Products Purchased In The U.S.A.

Cobra Electronics Corporation warrants that its Cobra GMRS radio(s), and the component parts

thereof, will be free of defects in workmanship and materials for a period of one year from

the date of first consumer purchase. This warranty may be enforced by the first consumer

purchaser, provided that the product is utilized within the U.S.A.

Cobra will, without charge, repair or replace, at its option, defective GMRS radio(s),

products or component parts upon delivery to the Cobra Factory Service department,

accompanied by proof of the date of first consumer purchase, such as a duplicated copy

of a sales receipt.

You must pay any initial shipping charges required to ship the product for warranty service,

but the return charges will be at Cobra’s expense, if the product is repaired or replaced

under warranty. This warranty gives you specific legal rights, and you may also have other

rights which may vary from state to state.

Exclusions: This limited warranty does not apply:

1) To any product damaged by accident; 2) In the event of misuse or abuse of the product or

as a result of unauthorized alterations or repairs; 3) If the serial number has been altered,

defaced, or removed; 4) If the owner of the product resides outside the U.S.A.

All implied warranties, including warranties of merchantability and fitness for a particular

purpose are limited in duration to the length of this warranty. Cobra shall not be liable for any

incidental, consequential or other damages; including, without limitation, damages resulting

from loss of use or cost of installation.

Some states do not allow limitations on how long an implied warranty lasts and/or

do not allow the exclusion or limitation of incidental or consequential damages,

so the above limitations may not apply to you.

For Products Purchased Outside The U.S.A.

Please contact your local dealer for warranty information.

LCD

Display

Maximum range may vary and is based on unobstructed

line-of-sight communication under ideal conditions.

Installing Batteries

To Install or Replace Batteries:

1. Remove belt clip by releasing belt clip

latch and sliding clip up.

2. Pull up on the battery door latch to remove the

battery compartment cover.

3. Insert three (3) AAA batteries. Position

batteries according to polarity markings.

4. Replace battery compartment cover

and belt clip.

Insert Batteries

Pull Latch Up

Remove Belt Clip

Trademark Acknowledgement

Cobra

, microTALK

, Nothing Comes Close to a Cobra

and the snake design are registered

trademarks of Cobra Electronics Corporation, U.S.A. Cobra Electronics Corporation™ is a

trademark of Cobra Electronics Corporation, U.S.A.

The Cobra

line of quality products includes:

CB Radios • microTALK

Radios • Radar/Laser Detectors • Safety Alert

Traffic Warning Systems •

HighGear

Accessories • CobraMarine

VHF Radios • Power Inverters • Trucker Nav Systems •

LED Lights • Jumpstarters • Accessories

Combination

Speaker/

Microphone

Charge Jack

Channel Numbers

While in Standby mode or when selecting

a channel, shows current channel (1 through 22).

When adjusting the volume,

shows current level (1 through 8).

Battery Low Icon

Blinks when battery power level is low.

Your microTALK

radio has a unique circuit

designed to extend battery life. If there are no

transmissions within ten (10) seconds, the radio

will automatically switch to Battery Save mode.

This will not affect the radio’s ability to receive

incoming transmissions.

Receive Icon

Visible when receiving

a message.

Transmit Icon

Visible when transmitting

a message.

Channel/Volume

Indicator

Visible when receiving

a message.

“ CH” is visible when in

Standby mode or when

selecting a channel.

“ LE” is visible when

adjusting volume.

Technical Assistance

English only. www.cobra.com

(on-line: Frequently Asked Questions).

English and Spanish. productinfo@cobra.com

(e-mail).

For Assistance Outside The U.S.A.

Contact Your Local Dealer

Weather Icon

Visible when in NOAA Weather radio

mode. You can use your microTALK

radio to listen to NOAA All Hazards

Radio channels transmitting in your area.

Mode/Power Button

Press and release to enter

mode function to change

channels.

The channel numbers will blink

when that mode is selected. Use

the Up/ Down buttons to select

a channel.

Press and hold to turn the

radio On or Off.

Press and release again

to enter the NOAA Weather

Channels.

Use the Up/Down buttons to

select the strongest weather

channel in your area.

CXT135_MANL_OR.indd 1 4/23/13 3:44 PM

Cobra CXT 135 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info