4 5
4. Charging the Headset
CWA BTH1 Plus includes a rechargeable built-in Lithium Polymer battery.
IMPORTANT: For first time use, charge the headset for at least 4 hours before pairing.
1. Insert the USB charging cable into the charging jack port
located at the bottom of the headset.
2. Plug other end of USB charging cable into a PC or insert the USB cable into the
cigarette adaptor and place into a working cigarette lighter outlet.
3. During charging the indicator will glow a steady red light
4. When charging is complete, the indicator light will turn off.
NOTE:
• Do not attempt to use headset while charging.
• Only use the supplied charger or original Cobra products to charge the headset.
• When headset battery charge is low, the indicator light will flash red.
• Do not charge the headset for more than 24 hours.
•
Recharge headset only within a temperature range of 14°F to 113°F.
5. Power On/Off
1. To power on, press and hold the multi-function button for 4+ seconds, the power
will turn on after the indicator flashes a blue light 3 times (the blue light will
continuously flash every 3 seconds).
2. To power off, press and hold the multi-function button for 4+ seconds until you
hear 3 beeps and you see the indicator flash red 3 times.
6. Pairing the Headset
IMPORTANT: Your Cobra Bluetooth headset and your Bluetooth
wireless technology
enabled phone or other device, must be “paired” before first time use.
1. Ensure the headset is off (no flashing indicator light).
2. Press and hold the multi-function button until the indicator light flashes blue/red
(the headset is in pairing mode).
3. Ensure your mobile phone has the Bluetooth wireless technology function and start
the new device searching function. Please follow the instructions of your mobile
phone to proceed the operation.
4. Activate the Bluetooth “discovery” function in the mobile phone or other Bluetooth
device. Example: Menu/Bluetooth/add new device. (See phone manual for
specific Bluetooth wireless technology pairing instructions.).
6. When the headset is recognized by your phone, “CBTH1” will appear in the list of
found devices.
7. Scroll to select or highlight “CBTH1” and press OK.
8. You will be prompted to enter the headset password “0000” press OK.
9. If pairing is successful, your headset’s indicator will flash blue. If pairing is not
successful, repeat the pairing process starting at step 1.
11. Certain phone models may require you to press “connect” or “add to trusted
devices” (See phone manual for specific Bluetooth wireless technology
pairing instructions).
10. Your headset is now paired and ready to use.
