793504
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Channel Scan
Your microTALK® radio can automatically scan channels.
To scan channels:
1. Press the Scan button, Scan icon and the channel numbers
appear on the display.
2. Press the Channel Up or Channel Down button to begin
scanning channels.
The Scan icon will continue to be displayed when scan is on. Your
radio will continue to scan all channels and stop if an incoming
transmission is detected.
During scanning (while receiving an incoming transmission), you can choose
from the following:
a. Press and hold the Talk button to communicate on that channel. Your radio will
remain on that channel and return to Standby mode.
b. Press the Channel Up or Channel Down button to resume scanning channels.
c. Press the Talk/Call button to return to Standby.
Privacy Code Scan
Your microTALK® radio can automatically scan the Privacy Codes (either CTCSS 01
through 38 or DCS 01 through 83) within one channel. Only one set of privacy codes
(CTCSS or DCS) can be scanned at a time.
To scan privacy codes:
1. While in Standby mode, press the Channel Up or Channel
Down button to choose the channel on which you wish to scan
privacy codes.
2. Press the Scan button twice until either the CTCSS or the DCS
icon appears on the display and the privacy code numbers flash
on the display.
3. Press the Channel Up or Channel Down button to begin
scanning privacy codes within the channel you selected.
During scanning (while receiving an incoming transmission),
you can choose from the following:
a. Press and hold the Talk button to communicate on that
channel/privacy code. Your radio will remain on that
channel/privacy code and return to Standby mode.
b. Press the Channel Up or Channel Down button to resume
scanning privacy codes. If you do not press any button within 10
seconds, your radio will automatically resume scanning privacy
codes.
c. Press the Talk/Call button to return to Standby.
Five Call Tone Settings
You can choose between five different Call Tone Settings to
transmit a call alert.
To change a call tone setting:
1. Press the Mode/Power button until the letter “C” and the
current call tone number (01 through 05) is displayed. The
current call tone will sound for four seconds.
2. Press the Channel Up or Channel Down button to hear the other
call tone settings.
3. Choose one of the following:
a. Press the Mode/Power button to enter the new setting and
proceed to other functions.
b. Press Talk/Call button to return to Standby mode.
c. Do not press any button for 12 seconds to return to Standby
mode.
Roger Beep Confirmation Tone
Your listener will hear an audible tone when you release the Talk button. This alerts
the other party that you are finished talking and it is ok for them to speak.
To turn roger beep on and off:
1. Press the Mode/Power button until the Roger Beep icon
flashes. The current on or off setting is displayed.
2. Press the Channel Up or Channel Down button to select roger
beep on or off.
3. Choose one of the following:
a. Press the Mode/Power button to enter the new setting and
proceed to other functions.
b. Press the Lock button to transmit the call tone return to
Standby.
c. Do not press any buttons for 12 seconds to return to Standby
mode.
Key Tone On/Off
When Key Tone is On, an audible tone will sound each time a button is pressed.
To turn key tone on and off:
1. Press the Mode/Power button until the Key Tone icon flashes.
The current on or off setting is displayed.
2. Press the Channel Up or Channel Down button to select key
tone on or off.
3. Choose one of the following:
a. Press the Mode/Power button to enter the new setting and
proceed to other functions.
b. Press the Lock button to transmit the call tone return to
Standby.
c. Do not press any button for 12 seconds to return to Standby
mode.
Voice Activated Transmit (VOX)
In VOX mode, your microTALK® radio can be used “hands-free,” automatically
transmitting when you speak. You can set the VOX sensitivity level to fit the volume of
your voice and avoid transmissions triggered by background noise.
To turn VOX mode on and off:
1. Press the Mode/Power button until the VOX icon flashes on the
display. The current On or Off setting is displayed.
2. Press using the Channel Up or Channel Down button to turn
VOX On or Off.
3. Choose one of the following:
a. Press the Mode/Power button to enter the new setting and
proceed to other functions.
b. Press the Talk/Call button to return to Standby mode.
c. Do not press any buttons for 12 second to return to Standby
mode.
To set VOX sensitivity:
1. Press the Mode/Power button until the VOX icon flashed and
the current sensitivity level is displayed.
2. Press the Channel Up or Channel Down button to select the
sensitivity level 01 to 05.
3. Choose one of the following:
a. Press the Mode/Power button to enter the new setting and
proceed to other functions.
b. Press the Talk/Call button to return to Standby mode.
c. Do not press any button for 12 seconds to return to Standby
mode.
Set DCS Privacy Codes
To select a DCS privacy code:
1. After selecting a channel, press the Mode/Power button until the
DCS icon appears and the small numbers flash on the display (01
through 83).
2. Press the Channel Up or Channel Down button to select a DCS
privacy code. You can hold the Up or Down button for fast
advance.
3. When your desired DCS privacy code is displayed, choose one of
the following:
a. Press the Mode/Power button to enter the new setting and
proceed to other functions.
b. Press the Talk/Call button to return to Standby mode.
c. Do not press any buttons for 12 seconds return to Standby
mode.
14 15 16
9
VOLUME
CALL
MODE
CHANNEL
SCAN
CALL
MODE
SCAN
Mode/Power
10 11
VOLUME
CALL
MODE
CHANNEL
SCAN
VOLUME
CALL
MODE
CHANNEL
SCAN
VOX Sensitivity
Level
VOLUME
CALL
MODE
CHANNEL
SCAN
Channel Scan
CALL
MODE
SCAN
Mode/Power
VOX Icon
CALL
MODE
SCAN
Mode/Power
CALL
MODE
SCAN
Mode/Power
12
13
Scan Privacy Codes
Call Tone Setting
VOLUME
CALL
MODE
CHANNEL
SCAN
CHANNEL
Roger Beep Off
CALL
MODE
SCAN
Mode/Power
CALL
MODE
SCAN
Mode/Power
CALL
MODE
SCAN
Scan Button
VOLUME
CALL
MODE
CHANNEL
SCAN
Key Tone Off
CALL
MODE
SCAN
Mode/Power
Using Your Radio
Using Your Radio
If CTCSS is turned on at the channel selected, the
display will flash the DCS icon and “OFF.” To switch
from DCS to CTCSS, press the Channel Up or Channel
Down button while the display is flashing “OFF.” The
display will then show the small numbers flashing and
you will then be able to proceed to step 2.
Set CTCSS Privacy Codes
To select a CTCSS privacy code:
1. After selecting a channel, press the Mode/Power button until the
CTCSS icon appears and the small numbers next to the channel
number flash on the display.
2. Press the Channel Up or Channel Down button to select a
privacy code. You can hold the Up or Down button for fast
advance.
3. When your desired CTCSS privacy code is displayed, choose one
of the following:
a. Press the Mode/Power button to enter the new setting and
proceed to other functions.
b. Press the Talk/Call button to return to Standby mode.
c. Do not press any buttons for 12 seconds to return to Standby
mode.
VOLUME
CALL
MODE
CHANNEL
SCAN
CALL
MODE
SCAN
Mode/Power
If DCS is turned on at the channel selected, the display
will flash the CTCSS icon and “OFF.” To switch from
DCS to CTCSS, press the Channel Up or Channel
Down button while the display is flashing “OFF.” The
display will then show the small numbers flashing and
you will then be able to proceed to step 2.
The current VOX sensitivity level is displayed with
letters “L” and a Number 1 through 5, with Number
5 being the most sensitive level and Number 1 being
the least sensitive level.
Declaration of Conformity (DoC)
The radio ignores specific privacy codes while scanning.
Select Channel
Trademark
CEEL™ is a registered trademark of Cobra Electronics
Europe, Ltd.
Snake design and microTALK® are registered
trademarks of Cobra Electronics Corporation, USA.
Warranty & Customer Service
For warranty and customer service information, please
contact your dealer.
For use in EU countries, subject to local laws and
regulations.
©2019 Altis Zenus BV in the Netherlands
Wassenaarseweg 57,
2596CL The Hague
Niederlande/ Netherlands
We, the company Altis Zenus BV in the Netherlands
Wassenaarseweg 57,
2596CL The Hague
Niederlande/ Netherlands
declare under our sole responsibility that the following
product
Type of product: Walkie Talkie
Trademark: Cobra
Model: AM645
Further details: battery operated, 446MHz
meets the essential requirements of the following
EU-Directives:
2014/53/EU Directive on the making available of radio
equipment on the market
2011/65/EU Annex II amending Annex (EU)2017/2102
Directive on the restriction of the use of
certain hazardous substances in electrical and
electronic equipment
applied standards and regulations:
EN 60950-1:2006+A11:2009+A1:2010+ A12:2011+A2:2013
EN 50566:2013
EN 300 296 V2.1.1
EN 301 489-1 V2.1.1 EN 301 489-5 V2.1.1
IEC 62321-3-1:2013 IEC 62321-4:2017
IEC 62321-5:2013 IEC 62321-6:2015
IEC 62321-7-1:2015 IEC 62321-7-2:2015
IEC 62321-8:2017
Authorized person for technical documentation:
Name, Position: Jaap Derk Buma, Director
The Hague, 30-10-2018
……………… …………………
Date Signature
Scrolling Through the Mode Function
By scrolling through the Mode function, you will be able to select or turn on preferred
features of your microTALK® radio. When scrolling through the Mode function, your
radio features will be displayed in the same predetermined order:
Set CTCSS Privacy Codes
Set DCS Privacy Codes
Set Vox On/Off
Set Vox Sensitivity
Set Channel Scan
Set CTCSS Privacy Code Scan
Set DCS Privacy Code Scan
Set Call Tones
Set Roger Beep On/Off
Set Key Stroke On/Off
Privacy Codes
Your microTALK® radio incorporates two advanced coded squelch systems that can
help to reduce interference from other users on any given channel. CTCSS (Continuous
Tone Coded Squelch System) provides 38 privacy codes and DCS (Digitally Coded
Squelch) provides 83 privacy codes. This provides a total of 121 Privacy Codes. Either
system can be used on all channels, but both systems cannot be used on the same
channel at the same time.
CALL
MODE
SCAN
Mode/Power
To successfully communicate using a
privacy code, both the sending and
receiving radios must be tuned to the
same channel and to the same privacy
code system (CTCSS or DCS) and privacy
code number. Each channel will
remember the last privacy code system
and number you select.
The privacy code 00 is not a
privacy code, but allows all
signals to be heard on a channel
that is set to 00 on both the
CTCSS and DCS systems.
Channel Button
Channel Button
Channel Button
Channel Button
Channel Button
Channel Button
Channel Button
Channel Button
Privacy Code
DCS Privacy Code
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cobra AM645 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cobra AM645 in de taal/talen: Engels als bijlage per email.

De handleiding is 4.62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Cobra AM645

Cobra AM645 Gebruiksaanwijzing - Nederlands - 2 pagina's

Cobra AM645 Gebruiksaanwijzing - Deutsch - 2 pagina's

Cobra AM645 Gebruiksaanwijzing - Français - 2 pagina's

Cobra AM645 Gebruiksaanwijzing - Espanõl - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info