any fuel in their interior so any appearance of stains is
always due to environmental factors.
▪ When the equipment is working, its outer surface is hot so
children must be kept away from the radiator.
▪ Any operation inside the equipment for its repair,
maintenance, transfer, etc. must always be performed by a
professional electrician and with the apparatus disconnected.
▪ It is not necessary to earth (electrically isolate) the equipment,
as it is Class II.
▪ If the connecting tube deteriorates or is in a poor state, it must
be replaced by a qualified electrician, manufacturer or
technical service (minimum 2 x 16 AWG)
▪ This heater is hot when used, To avoid burns, do not let bare
skin touch hot surfaces.
▪ Keep combustible materials at least a 2m from the front of the
heater and away from the sides and rear.
▪ Extreme caution is necessary when the heater is used by or
near children or invalids and whenever the heater is left
operating and unattended.
▪ Always keep the heater unplugged if its not going to be used.
▪ Do not operate the heater if the cord or the plug are damaged
or after the heater malfunctions, has been dropped or
damaged in any manner. Return heater to an authorized
service facility for examination.
▪ Do not use the heater outdoor.
▪ Never locate the heater where it may fall into a bathtub or a
water container
▪ Do not run cord under carpeting. Do not cover cord with throw
rugs, runners or similar coverings. Arrange cover away from
traffic area and where it will not be tripped over.
▪ To disconnect the heater, turn controls off and then unplug.
▪ Do not insert or allow foreign objects to enter any ventilation
or exhaust opening as it may cause an electric shock or fire or
damage the heater.
▪ To prevent a possible fire, do not block air intakes or exhaust
in any manner. Do not use it in soft surfaces, like a bed, where
openings may become blocked.
▪ A heater has hot and arcing parts inside. Do not use it areas
where gasoline, paint or flammable liquids are used or stored.
