650999
28
Verklein
Vergroot
Pagina terug
1/89
Pagina verder
28
Installing your wine cellar:
This wine cellar is designed for free-standing installation.
Position it in a place with sufficient strength to support its weight when loaded.
To get the best from your appliance with the lowest energy consumption, do not place the appliance
close to a heat source (heater, cooker, etc.), do not expose it to direct sunlight, and do not place it in a
room which is too cold.
Connect the cellar to a single socket, leaving a 10 cm gap between the back of the cellar and the wall.
Ensure that your wine cellar is perfectly horizontal, then slightly raise the two front feet. (Use of a spirit
level is recommended). This will prevent any movement due to instability, causing noise and vibration,
and will ensure that the door seals perfectly.
Control panel:
Selecting the temperature:
Functions of buttons:
1. Set the RED button, enter this procedure of control mode: refrigerated storage temperature for red
wines.
2. Set the WHITE button, enter this procedure of control mode: refrigerated storage temperature for white
wines.
The temperature varies of approximately + 4 ° C (top) and - 4 ° C (bottom) according to the chosen temperature
at the middle, which will make a fresh, aging and chambering zones.
Temperatures example when we set 12°C:
TOP MIDDLE BOTTOM
VSV120
18°C 14°C 10°C
VSV105
16°C 12°C 8°C
VSV50
15°C 12°C 8°C
Light button: control the turn-on/ turn-off of the Wine cooler’s indicator light.
Press the SET button once, the preset temperature is shown for 10seconds, after that, it recovers to show the
chamber temperature.
Set the SET button (effective after a lasting 2 seconds press); enter selection procedure of manual temperature
adjustment. Flicker means it is setting the control temperature. Then press RED button (+) or the WHITE button (-
). Each press changes the temperature by 1°C.
After all parameters are set, press the SET button. There is a beep to confirm and the flicker will stop. It returns to
show the current temperature. If there is no any operation during 10s, the machine confirms and stores the setup
automatically and returns to the current temperature.
Conversion of temperature units:
Press and hold the RED button for 2s, to change the temperature between Fahrenheit and Celsius.
Set the RED indicator light; under the red wines control condition, the RED indicator light is on.
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Climadiff VSV50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Climadiff VSV50 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 1,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info