recommendations given in the present manual.
Unpack the appliance and visually check that it is not
damaged. Do not connect a damaged appliance. Inform your
retailer or point of sale of any damage. In such a case, keep
the packaging.
It is recommended that the appliance be allowed to settle for
at least 24 hours before connecting the electrical power
supply, so that the compressor fluid feed is correct.
Proper air circulation is necessary to avoid overheating. To
ensure sufficient ventilation, observe the installation
recommendations provided.
In order to avoid fire risk, wherever possible, ensure that the
appliance is not in contact with walls or with any hot element
(compressor, condenser). Observe the installation
recommendations.
The appliance should not be placed close to radiators or
cooking hot plates or gas rings.
Check that electrical sockets remain accessible when the
appliance is installed.
Power saving
To limit the electricity consumption of your appliance:
Install it in an appropriate place (see “Installation
instructions”).
Leave the doors open as little time as possible.
To ensure that the appliance operates properly, clean the
condenser regularly (see “Maintenance”).
Regularly inspect the door seals and ensure that they are
still closing properly. If this is not the case, contact your
after-sales service.
