646237
26
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
EN 26
3. Carefully remove the cyclone insert (B) from the dust con-
tainer.
4. Pull the lter holder (C) out of the cyclone insert and re-
move the foam lter.
Please note: The second motor lter is attached to the
lter holder and cannot be removed from the holder!
5. Tap out all the parts over a bin and brush away any loose
dirt.
6. If required, rinse out the lters thoroughly with clear, lukewarm water.
Attention: Do not use any cleaning products!
Next shake off any surplus water and leave the lters to air dry completely before
replacing them in the device.
7. You can clean the cyclone insert and dust container with a damp cloth.
8. When all parts are dry, replace the cyclone insert in the dust container.
Please note: There is an arrow symbol on the top of the cyclone insert. Place the
cyclone insert into the dust container so that this arrow symbol points to the
symbol on the dust container.
9. After drying, place the foam lter back into the lter holder and replace the holder
onto the cyclone insert.
Attention: Never put damp parts back into the dust container!
10. Put the lid on the dust container so that the arrow symbol
on the lid points to the
symbol on the dust container.
Close the lid by turning it as far as it will go. The arrow
symbol should now be pointing to the
symbol on the
dust container.
11. Put the dust container in the device. Make sure that it audibly locks into place.
If the lters are damaged or worn you can order new lters at
www.service-shopping.de.
Cleaning the HEPA exhaust air lter
The HEPA exhaust air lter is situated behind the protective grill on the back of the
vacuum cleaner.
1. Pull up the exhaust hatch latch (D) and remove the hatch
simultaneously.
2. Remove the lter from the lter compartment and tap
it out over a garbage bin. If necessary, clean it with a
soft brush. You can also rinse the lter out under clear,
lukewarm warm water.
Attention: Do not use any cleaning products!
Next, shake off any surplus water and leave the lter to air dry completely before
replacing it in the device.
3. Brush or wipe the lter compartment if required.
4. Place the dry lter back in the lter compartment.
C
B
D
09666_de-en-fr-nl_V1.indb 2609666_de-en-fr-nl_V1.indb 26 28.08.2015 14:07:5328.08.2015 14:07:53
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cleanmaxx Z 09666 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cleanmaxx Z 09666 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info