703394
19
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
19 EN
The lter should be replaced every 12 18 months; the UV-C lamp (12)
should be replaced every 12 – 24 months. If you have any questions about
spare parts, please contact the customer service department via our web-
site: www.dspro.de/kundenservice
Use
PLEASE NOTE!
The device should only be used if it has been completely and correctly assembled!
The dust container and the lter must be inserted and must not be damaged. If
the dirt were to get inside the motor unit, this could damage the motor.
Make sure that the safety switches of the UV-C lamp are not blocked!
Switch the device off after each surface has been cleaned as this will considerably
increase the operating time on each battery charge. Charge up the battery after use
(see the “Charging Up the Battery” chapter).
1. Place the device down fl at on the surface which is to be cleaned.
2. Press the On / Off switch (2) to switch on the device. The device starts to vacuum and
the UV-C lamp (12) and the vibration head (11) switches on.
The vibration shakes up the surface which is to be cleaned and the dust which
is agitated is sucked in through the suction opening (8).
3. Guide the device very slowly and evenly over the surface to be cleaned.
4. After vacuuming, press the On / Off switch to switch off the device.
Cleaning and Storage
PLEASE NOTE!
Empty the dust container each time after you use the device. The lter must also be
regularly cleaned in order to prevent overloading of the motor.
Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the de-
vice. These can damage the surface.
As required, wipe down the motor unit (4) with a damp soft cloth. Then dry it with a
soft cloth.
Wipe out the recess for the dust container (5) with a duster.
Store the device in a dry, cool place that is not accessible to children and animals.
Cleaning the Dust Container and HEPA Filter
1. Press onto the dust container (5) to unlock it.
2. Reach into the recess in the dust container and pull it up and out of the motor unit (3).
3. Reach into the opening and pull the HEPA-fi lter out of the dust container.
4. Empty the dust container.
5. Wipe out the dust container with a dry duster if necessary.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cleanmaxx SV1801 - Z03416 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cleanmaxx SV1801 - Z03416 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info