Special Safety Instructions for this Device
• If the high-pressure cleaner is handled incorrectly, this may prove hazardous for
individuals and materials. Children and young people are often not able to eva-
luate risks. They should therefore not be allowed to operate the device.
• Never leave the device unattended as long as the main switch is turned on.
• During work breaks the manual spray gun should be secured by use of the
lock.
Here there is a Danger of Death!
• Never operate the device in rooms where there is a risk of explosion.
• Never touch the mains plug with wet hands.
As additional protection the installation of a residual current device
(RCD) with a rated breaking current of not more than 30 mA is
recommended in the electric circuit of the bathroom. Please consult
a qualified electrical engineer.
• Before operating the device always check the mains power cable,
the mains plug and high-pressure hose for damage. Damaged
cables must be replaced immediately by an approved qualified elec-
trician. Damaged high-pressure hoses are to be replaced immedia-
tely.
• The following should be taken into consideration when cleaning
motor vehicles: Tyres and tyre valves may be damaged by the high-
pressure jet and then burst. The first indications of this are discolora-
tion of the tyre. Only the fan jet should be used. A distance of at
least 50 cm should be maintained during the cleaning process.
Here there is a Danger of Injury!
The jet of water emerging from the high-pressure nozzle causes the
manual spray gun to recoil.
Please ensure you are standing in a stable location. Hold the manual
spray gun and the jet pipe as tightly as possible.
If required, you should wear appropriate protective clothing as protection
against spray.
Overview of the Controls
55
GB
1 Main on/off switch
2 High-pressure outlet
3 Water connection with filter
4 Coupling section
5 Jet pipe was high-pressure nozzle
6 Supply hose (not supplied)
7 High-pressure hose
8 Manual spray gun
9 Mains plug
10 Lock
