large amounts of foam may form, which under certain circumstances may
cause the oil to overflow.
9. After use, unplug the deep fryer.
10. Should the deep fryer be accidentally switched on without any oil or grease in it,
the overheating protection switches on automatically. The appliance is no longer
ready to be used. Unplug the deep fryer.
11. Please wait until the device has completely cooled down before pressing the
"Restart" button (9) on the back when you want to use the fryer again.
Use
1. Make sure that the appliance is unplugged and switched off.
2. Take the lid off the deep fryer.
3. Remove the frying basket and fill the container with oil or grease (maximum 3 l).
The filling level must be located between the minimum and the maximum level.
Put the lid back on.
Please note the following important information!
If you use fat, divide it up into small pieces and place it on the floor of the deep
frying vessel.
Under no circumstances should you place the fat in the deep frying basket!
4. Insert the plug into a 230 V, 50 Hz power socket. An acoustic signal is heard
and "130°C" appears on the display (C). Set the temperature control to the desi-
red temperature by pressing the TEMP buttons >+ / -< (B). When the
START/STOP button (D) is pressed a small triangle appears above the tempe-
rature display.The triangle indicates that the machine is switched on.
5. Once the temperature that has been set is reached an acoustic signal is heard
again (until you set the timer).
6. Take the lid off and put the frying basket with the food to be fried carefully into
the hot oil.
7. Now use the TIME buttons >+ / -< (A) to set the desired frying time (max. 30
minutes). The time that has been set appears in the display, and after a few
seconds a small triangle. The timer is now active.
8. After the frying time has elapsed (frying times are to be found on the packaging
of the food or in the recipe) an acoustic signal is heard again. If necessary, you
can set the timer again.
9. Open the lid with care (Warning! Hot steam may be released!). Remove the fry-
ing basket.
10. Let the oil drip from the food being fried.
11. In order to switch off the machine, press the START/STOP button and remove
the plug from the socket.
Cleaning
1. Make sure that the plug is pulled out.
2. Wait until the deep fryer is completely cool before cleaning. Wait in any case for
1 to 2 hours after use before using again to avoid burns.
36
GB
