319584
40
Verklein
Vergroot
Pagina terug
1/66
Pagina verder
ENGLISH
ENGLISH
40
Blower Aperture
The device has a blower
function. This enables you to
blow out dust or leaves.
Attach the hose connection
(8) to the blower aperture
(12).
Mains Lead
To use the device please unwind the entire lead.
After use you can wind up the lead in the cable duct on the
motor housing.
Parking Position
On the motor housing your
device has a holder for the
oor nozzle.
Here you can hang up the
nozzle in order to “park” it.
Operation
General
Select the desired accessory.
Unwind the lead completely.
Insert the mains plug into a correctly installed 230V, 50Hz
power socket.
Dry Vacuuming
Insert the permanent dust bag; it may be necessary before-
hand to remove the hose connection.
Attach the motor housing.
Assemble the accessory.
Turn the device on.
Vacuum at a steady speed. There is no need to exert
pressure.
Removing and Emptying the Dust Bag
Turn the device off with the on/off switch (2). Pull the plug
out of the socket.
Remove the motor housing.
Take off the hose connection.
Remove the dust bag.
Empty the dust bag by pulling off the clip.
Push the clip back in place and reinsert the bag. Check that
it is inserted properly in the holder.
Reassemble the hose connection and the motor housing.
Now you can use the device again.
Wet Vacuuming
CAUTION:
Never use the dust bag when vacuuming up liquids.
Allow the hose connection to discharge directly into the
collection vessel.
Do not use the fl oor nozzle, but the parquet brush.
Before the cleaner is used again for dry vacuuming, all
components must be dry.
Remove the permanent dust bag and reattach the motor
housing.
Assemble the attachment.
Switch the device on.
CAUTION:
Turn the device off immediately if foam forms, liquid leaks out
or if the vessel is full.
ޥ NOTE:
When the vessel is full the fl oat valve (16) closes the suction
aperture and the motor runs at a higher speed. Switch the
device off immediately and empty it.
Emptying the Collection Vessel
Turn the device off by the on/off switch (2). Pull the plug out
of the socket.
Remove the motor housing.
Empty the collection vessel.
Reassemble the hose connection and the motor housing.
You can now use the vacuum cleaner again.
Cleaning and storage
Pull the plug out of the socket.
In order not to damage the surfaces, please do not use any
abrasive detergents or scratching cleaning utensils.
Collection Vessel
Rinse out the collection vessel after use with clean water.
Any dirt in the vessel can be removed with a sponge or
nylon brush.
Permanent Dust Bag
Quick cleaning: Tap or brush out the dust bag in order to
remove any residues.
Hand wash: If soiling is more severe we recommend a
hand wash up to 40°C.
ޥ NOTE:
The bag should only be allowed to dry in the air!
Only use the vacuum cleaner again when the dust bag is
dry!
05-BS 1260 40 19.09.2006, 12:54:59 Uhr
40

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Clatronic bs 1260 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Clatronic bs 1260 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Noors als bijlage per email.

De handleiding is 4,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info