814273
14
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
HL3800_IM_04.2023 22.05.23
14
Operation
Electric Connection
1. Make sure the voltage of the appliance (see rating label)
matches the mains voltage to be used.
2. Set the function control knob to 0.
3. Unwind the mains cable completely.
4. Only connect the mains plug with a properly installed
earthed socket.
Setting the Temperature
The thermostat constantly switches the fan heater on and
off, thereby keeping the temperature at the desired level.
Set the desired temperature as followed:
1. Set the temperature control to its highest setting.
2. Once the desired temperature has been reached, slowly
turn the temperature control back, until the fan heater
switches off audibly. The indicator lamp turns off.
NOTE:
The audible position of the temperature control de-
pends on the ambient temperature.
3. The fan heater will then keep the desired temperature
level.
CAUTION:
When not using the appliance, disconnect the mains plug.
Oscillation
To achieve even heating or ventilation, the appliance is
additionally equipped with an oscillation function.
There is a switch on the back of the appliance to switch the
oscillation mode on or off.
0 = Oscillation switched off
I = Oscillation switched on
CAUTION:
Never adjust the swivel mechanism with your hand. The
mechanism could be damaged.
Fan Operation
If you want to use the appliance as a fan, turn the function
control knob to the fan icon and turn the temperature control
to highest position.
End Operation
If you want to end the operation, set the function control
knob to the position 0. The indicator lamp turns off. Then
disconnect the mains plug from the socket.
Overheat Protection
The appliance features an overheat protection mechanism
causing the appliance to switch off automatically in case of
overheating.
1. Set the function control knob to position 0 and pull the
mains plug out of the socket.
2. Let the appliance cool down for approx. 10 minutes
before using it again.
NOTE:
If the overheat protection mechanism causes the appli-
ance to switch off again after a short period, this might
indicate a defect.
1. Switch off the appliance and disconnect it from the
mains.
2. Have the appliance checked by your dealer or our
customer service.
Cleaning
WARNING:
Always unplug the appliance from the mains before
cleaning and wait until the appliance has cooled down.
Never immerse the appliance in water to clean it. This
may lead to electrical shock or re.
CAUTION:
Do not use wire brushes or other abrasive materials.
Do not use caustic or scouring agents.
Wipe away dust with a dry cloth.
Flecks can be removed with a suitably damp cloth.
Dust on the Protective Grilles
Accumulation of dust on the protective grilles can lead to
overheating.
Remove the dust by careful brushing.
or
Use the upholstery nozzle of your vacuum cleaner to
remove the dust.
Storage
Let the appliance cool down before putting it away!
Wind the mains cable loosely.
We recommend storing the appliance in its original
packaging if you do not intend to use it for a long period
of time.
Always store the appliance out of the reach of children in
a well-ventilated and dry place.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Clatronic HL 3800 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Clatronic HL 3800 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 2.29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info