653907
32
Verklein
Vergroot
Pagina terug
1/58
Pagina verder
32
BS 1304_IM 17.11.2015
4. Set the “carpet/hard oor” switch, depending on the oor
covering.
5. Vacuum at a steady speed. There is no need to exert pres-
sure.
NOTE:
Pay attention to the range that can be covered with the
cable length!
Air Slide (2)
Open the air slide on the hose handle in order to regulate the
airow or to clear any particles sticking to the nozzle.
Switching off and Winding up the Mains Lead
1. Turn the vacuum cleaner off by the on/off switch and
remove the plug from the socket.
2. Keep the plug in your hand.
3. Press the cable winding button and guide the cable. Hold
the cable to avoid wrapping.
Maintenance
Emptying the dust collector
Empty the dust collector once the collected dirt reaches the
MAX marking.
1. Disconnect the mains plug from the wall socket.
2. Disconnect the hose from the hose connection.
3. Press the button (8) to
release the dust collector.
Remove the dust collector.
(Fig. A)
4. Empty the dust collector
over a dustbin. In order to
do so, press the button on
the dust collector to open
the base plate.
(Fig. B)
5. Then close the base plate again.
6. Attach the dust collector to the appliance. First position it
at the bottom of the appliance and then secure it with the
hook on top.
7. Check that the position of the dust collector is secure by
briey lifting the appliance at its carrying handle.
Filter
Your appliance features 4 lters. The common dust bag system
has been replaced by a transparent dust collector. The higher
ow speed of the collector allows for heavy dirt and smallest
oating particles to be separated from the “sucked-in air”.
It is thus not necessary to buy dust bags.
HEPA lter
Clean the lter element twice a year.
CAUTION:
Never wash the lter in the washing machine.
Do not use a hairdryer for drying.
Only use the appliance after the lters have been
installed correctly.
Proceed as follows to remove, clean and reinstall the lter ele-
ment:
1. Empty the dust collector as described previously.
2. Remove the dust collector lid. To do so, turn the
marking on the lid towards the
symbol. Pull the lter
element from the dust collector.
3. Remove the lter element from the lid by turning the lter
element towards
.
4. Pull the nylon lter from the HEPA.
5. Use a brush to clean the lters. In case of heavy staining,
clean the lters under running water.
6. Let the lters air-dry completely before retting them!
7. Wipe the dust collector with a damp cloth and then wipe it
dry.
8. Once the lters are completely dry, attach the nylon lter to
the HEPA lter (see the gure on page 3).
9. Reinsert the lter element into the lid of the dust collector,
using the notches in the lid. Turn the lter element towards
the
symbol until it clicks into place.
10. Reinsert the lid including the lter element into the dust
collector. Close the lid until the marking is aligned with
the symbol.
11. Fit the dust collector in the appliance.
Outlet lter
The appliance is also equipped with an outlet lter.
It is located on the rear of the device under the parking aid.
1. Push down the lever (12) and remove the ventilation grille.
2. Remove the lter insert and clean it as described above.
3. Place the completely dry lter back into the ventilation grille.
4. Put the ventilation grille back on the appliance. Observe the
guide lugs. The ventilation grid must engage audibly.
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Clatronic BS 1304 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Clatronic BS 1304 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 2,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info