33
English
32
33
6.4 Electronic Program Guide
This submenu allows you to access the electronic program guide when available.
⊹
Press the GUIDE button to display the guide menu. <Figure 6.4.1>
⊺
Press / to see the previous/next guide.
⊻
Press / / / to select another channel. <Figure 6.4.1>
⊼ Press to watch the selected channel and access its EPG data.
If you press in the right side of the screen (Event display list).
- If the current time EPG is selected, you will return to the previous menu and get signal
from the selected channel.
- If a future time (next) EPG is selected, the selected program will be reserved and the
event color will change.
⊽ You can select TV or Radio channels by pressing the TV/RADIO button
⊾ You can choose a channel list group by pressing the GROUP button.
⊿ You can access the timer menu by pressing the RED button. <Figure 6.4.2>
1) EPG
32
6) Delete Channels
This submenu allows you to delete channels. You can select TV or Radio channels in an
alternative way by pressing the TV/RADIO button. You can choose a channel list group
by pressing the GROUP button.
ҫ
Note : Be careful! If you delete a channel, you will not be able to access it again until
you rescan.
⊹
Press on ‘Delete Channels’. The following menu will be displayed. <Figure 6.3.7>
⊺
Press on the channel that you want to set/unset for deletion; the delete icon will
be displayed/removed.
⊻
Press the INFO button to delete all channels in the current list; you will be asked to
enter your password.
⊼ Press the EXIT button to return to the previous menu and confirm deletion.
<Figure 6.3.7>
6.3 Channels
This sub menu allows you to set the on/off time of your receiver.
⊹
This submenu allows you to set on/off times of your receiver. To display the timer menu,
press the RED button while in the guide menu. <Figure 6.4.2>
⊺
Press to select a timer’s parameter.
⊻
Press / to change the parameter.
- Timer No : Select the timer that you want to modify.
(
1- 8
)
- State : Select the timer frequency. (off/once/daily/weekly)
- Date : Press to display a Calendar pop-up; Select a date
- Start Time : Input the time for your receiver power-on; use the NUMERIC buttons
- End Time : Input the time for your receiver power-off; use the NUMERIC buttons
- Channel : Press to display a Channel list pop-up; Select a channel
