6 7
English
Controls/Functions
4.1 Front Panel
4.2 Rear Panel
Power : Switches the receiver between ‘Standby’ and ‘Power ON’ modes.
Standby/Power on Indications Lamp : Flashes red light in ‘Standby’ mode and
shows no light in ‘Power ON’ mode.
Indication Light : Flashes when a key on the Remote Control Unit (RCU) is
pressed.
- CH.
HHᵋᵋ
/
ᵍᵍII
: To switch channels or change the cursor position on the
application screen.
54
3
2
1
2
1 3 4 5
12
1 3 6 7 9
11
13 14
54 82 10
No. Name Connector Function
1 LNB INPUT IEC 169-24 FEMALE IF input from LNB to digital tuner
2 LOOP OUT IEC 169-24 FEMALE IF loop-through output from digital tuner
3 VIDEO RCA cinch Composite video output
4 AUDIO L RCA cinch Left audio output
5 AUDIO R RCA cinch Right audio output
6Y RCA cinch Component video output (Y)
7Pb RCA cinch Component video output (Pb)
8Pr RCA cinch Component video output (Pr)
9 VCR/AUX SCART CVBS Video Output
SCART CVBS, RGB Video Input
Audio Output
10 TV SCART SCART CVBS, RGB Video Output
Audio Output
11 RS-232C DB-9 Low speed serial port
12 RF OUT UHF 21-69 IEC 169-2 MALE Output to TV
13 TV ANT IN IEC 169-2 FEMALE Input from terrestrial antenna
14 S/PDIF Fiber Optic Digital audio output(Optic).
