169006
12
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
English
12
Radio Data System
This unit has a built-in Radio Data System
decoder system that supports broadcast
stations transmitting Radio Data System data.
When using the Radio Data System function,
always set the radio to FM mode.
AF function
The AF function switches to a dierent
frequency on the same network in order to
maintain optimum reception.
* The factory default setting is ON.
1. Press and hold the [D] button.
2. Press the [ ] or [ ] button to select
AF.
3. Rotate the knob to select AF ON or AF
OFF.
AF ON:
AF in the display lights and AF function
turns on.
AF OFF:
AF in the display goes o and AF function
turns o.
REG (Regional programme)
function
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, if the regional station area
switches as you drive, a regional station for
that region is received.
* The factory default setting is ON.
Notes:
This function is disabled when a national
station such as BBC R2 is being received.
The REG function ON/OFF setting is valid
when the AF function is ON.
1. Press and hold the [D] button.
2. Press the [ ] or [ ] button to select
REG.
3. Rotate the knob to select REG ON or REG
OFF.
Manually tuning a regional
station in the same network
1. This function is valid when the AF function
is ON and the REG function is OFF.
Note:
This function can be used when a regional
broadcast of the same network is received.
TA (Trac Announcement)
In the TA standby mode, when a trac
announcement broadcast starts, the trac
announcement broadcast is received as top
priority regardless of the function mode so
you can listen to it. Trac programme (TP)
automatic tuning is also possible.
* This function can only be used when
“TP” is lit in the display. When TP is lit,
this means that the Radio Data System
broadcast station being received has trac
announcement programmes.
SettingtheTAstandbymode
If you press the [TA] button, “TA” lights in
the display and the unit is set into the TA
standby mode until a trac announcement
is broadcast. When a trac announcement
broadcast starts, TRAF INF appears in the
display. If you press the [TA] button while
a trac announcement broadcast is being
received, the trac announcement broadcast
reception is cancelled and the unit goes into
the TA standby mode.
CancellingtheTAstandbymode
When “TA” is lit in the display, press the [TA]
button. The TA in the display goes o and
the TA standby mode is cancelled.
PTY (Programme Type)
This function enables you to listen to a
broadcast of the selected programme type
even if the unit is on a function mode other
than radio.
* Some countries do not yet have PTY
broadcast.
* In the TA standby mode, a TP station has
priority over a PTY broadcast station.
Selecting PTY
Press the [MENU] button, then rotate the
knob to select PTY type, and press the
knob to conrm selection, the unit begins
searching.
Radio Data System Operations
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Clarion cz500e bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Clarion cz500e in de taal/talen: Engels als bijlage per email.

De handleiding is 2,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Clarion cz500e

Clarion cz500e Gebruiksaanwijzing - Nederlands - 30 pagina's

Clarion cz500e Gebruiksaanwijzing - Deutsch - 30 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info