580435
6
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
6
XMD1/XMD2
Turning ON the Power and Adjusting the Volume
1) Press the POWER button 4.
To turn off the power, press the POWER button 4 for 1 second or longer.
2) Press the FUNC button 4 and select another operation mode.
Every time the FUNC button 4 is pressed, the display changes
the operation mode as:
Radio CD CD changer Radio
Notes:
The operation mode not connected to the unit will not be selected.
If the CD mode is selected when no disc is inserted, the display
flashes DISC.
3) Use the volume button 1 to adjust the volume.
w: Increases the volume.
z: Decreases the volume.
The volume level is from 0 (minimum) to 33 (maximum).
Audio Mode Adjustments
Press the A-M button # to select the adjustment mode. The mode
switches as follows each time the A-M button is pressed:
BASS TREB BAL FAD Previous mode
Adjusting the Bass
1) Press A-M button # and select “BASS”.
2) Press volume button 1 w to emphasizes the bass; press z to
attenuates the bass.
The factory default setting is “0”. (Adjustment range: –6 to +6)
3) When the adjustment is complete, press A-M button # several
times until the function mode is reached.
Adjusting the Treble
1) Press A-M button # and select “TREB”.
2) Press volume button 1 w to emphasizes the treble; press z to
attenuates the treble.
The factory default setting is “0”. (Adjustment range: –6 to +6)
3) When the adjustment is complete, press A-M button # several
times until the function mode is reached.
7. OPERATION
Note:
Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3.
When this unit is turned on, starting and stopping the engine
of a boat with its volume raised to the maximum level may
harm your hearing.
Be careful about adjusting the volume.
CAUTION
Basic Operations
Adjusting the Balance
1) Press A-M button # and select BAL”.
2) Press the volume w emphasizes the sound from the right speaker;
press the volume z emphasizes the sound from the left speaker.
The factory default setting is “0”. (Adjustment range: L9 to R9)
3) When the adjustment is complete, press A-M button # several
times until the function mode is reached.
Adjusting the Fader
1) Press A-M button # and select “FAD”.
2) Press the volume w emphasizes the sound from the front speak-
ers; press the volume z emphasizes the sound from the rear
speakers.
The factory default setting is 0”. (Adjustment range: F9 to R9)
3) When the adjustment is complete, press A-M button # several
times until the function mode is reached.
Setting the Z-enhancer
This unit comes with three types of sound tone effects stored in
memory. Select the one you prefer.
The factory default setting is “Z-EHCR OFF”.
Each time you press Z-EHCR button &, the tone effect changes in
the following order.
“Z-ENHANCER 1” “Z-ENHANCER 2” “Z-ENHANCER 3” “Z-
EHCR OFF” “Z-ENHANCER 1”...
• Z-ENHANCER 1: bass emphasized
• Z-ENHANCER 2: treble emphasized
• Z-ENHANCER 3: bass and treble emphasized
• Z-EHCR OFF: no sound effect
Loudness Effect
In order to turn on/off the loudness effect, use the LOUD button #
for 2 seconds or longer. Every time the LOUD button # is pressed
and held for 2 seconds or longer, the loudness effect switches on
and off.
When the loudness effect is on, the display will show LD”.
Switching the Clock Display
Every time the DISP button % is pressed, the display will change
between the operation mode and the clock display.
Setting the Clock
1) Press the DISP button % to display the clock display.
2) Press and hold the DISP button % for 2 seconds or longer.
3) Press the SRCH Left button @, then set the current hour.
4) Press the SRCH Right button @, then set the current minute.
5) Press the DISP button %, then the clock is set.
Notes:
If you select another operation mode while you are setting the clock,
the clock setting operation will be canceled.
If you remove the vehicles battery for a check or repair, the clock
will be reset, so you must set it again.
OK NG
IMPORTANT
Door must be totally closed to prevent water go into the set!
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Clarion XMD2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Clarion XMD2 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info