659138
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Printed in Japan 2016/7 EG-2300E 274-0575-11
Installation Manual
EG-2300E
SurroundEye Control Box
Thank you very much for your purchase of this Clarion product.
To get the best performance from and to use this device effectively, first read this Installa-
tion Manual thoroughly and then install the device correctly and safely.
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2014 : Clarion Co., Ltd.
THE SURROUNDEYE CONTROL BOX
This camera ECU box can supply power to up to 4 cameras, process the images output by the
cameras and then output the images to the LCD monitor.
Compatible with DC 12V/24V vehicles
Starts up when ACC (or IG) is ON
Can be connected to Clarion cameras (NTSC std.)
Outputs images (NTSC std.) to monitor via RCA connectors
Setup (calibration) of the camera ECU is achieved using special software on a PC connected
via an interface box
An optional switch can be connected for switching the screen
SAFETY PRECAUTIONS
Always follow the safety precautions below when installing the device.
WARNING
Before making connections, disconnect the negative battery terminal.
Failure to do so may result in electric shock or injury due to short-circuit.
Discontinue use in the event of malfunction or abnormality.
Route the cables and bundle them with tape or the like so that they do not interfere with
driving operation.
If a cable coils around the steering column, gear lever, brake pedals, etc., it may lead to an accident.
Do not attempt to disassemble or modify the unit.
Never attempt to disassemble or modify the unit. Doing so may result in accident, fire, electric shock or
other malfunction.
Never use the vehicle's safety-related parts* for mounting or grounding the device.
* Nuts and bolts in the steering system, seat rails, brake system, tanks, etc.
Doing so may result in loss of control, fire or traffic accident.
Do not install this device in the following kind of places.
• Places that would obstruct the view to the front
• Places that would obstruct driving operations, such as the steering wheel, shift lever or brake pedal
• Places that present a hazard to passengers
Doing so may result in accident or injury.
Never mount or make connections in a place that would obstruct operation of the air
bags.
Mounting or making connections in a place that obstructs air bag operation will cause a problem if the
air bag system cannot operate properly during a car accident.
If installation of the device requires making a hole in the chassis, check the position of the
pipes, tanks, electrical wires, etc. and be sure to avoid interference or contact. Also, take
steps to prevent rust and water penetration.
Damaged pipes or other parts may lead to fire or electrical shock.
Never cut the insulation on the power cord to power another device.
Doing so will overload the cord and may cause a fire or electrical shock.
After completing installation and wiring work, check and make sure the vehicle's electri-
cal equipment* is working properly.
* Brakes, lights, horn, hazard lamps, blinkers, etc.
Malfunctioning equipment may lead to fire, electric shock or traffic accident.
Never drive looking solely at the monitor. This is an auxiliary device to supplement the
driver’s field of vision ; it does not show all hazards or obstacles. Actual distances and
perceptions may differ, so be sure to visually check safety while driving. Failure to do so
creates the risk of hitting a person or object in the camera’s blind spot, causing a serious
accident.
CAUTION
Entrust the installation and any modifications to the installation to an expert.
Failure to do so may result in an accident or fire. Contact the dealer where the device was purchased.
When installing the device on a vehicle with air bags, check the warnings on such work
provided by the maker of the vehicle before performing the work.
Failure to do so may result in malfunction of the air bags.
Follow the instructions in the manual when mounting and connecting the device.
Incorrect installation and/or connection may result in fire or accident.
Be sure to use the accessories and specified parts.
Using components other than those specified may lead to damage of the parts inside the device or the
inability to secure them firmly, resulting in them becoming detached and leading to an accident or mal-
function.
After wiring the various cords, secure them with clamps and/or insulating tape.
If the cables come into contact with the chassis, they will fray and short-circuit, leading to an accident or
fire.
Route the cables so that they do not get caught in the chassis, screws, seat rails or other
moving parts.
Damaged or short-circuited cables may result in an accident, electric shock or fire.
Never mount in a location subject to a lot of vibration or where it cannot be securely fas-
tened.
If the unit comes loose, it may result in an accident or injury.
Do not install in a location subject to direct sunlight or hot air from the heater.
The temperature inside the unit may get too high, resulting in fire or damage.
PRECAUTION
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a resi-
dential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to consult the dealer or
an experienced radio/ TV technician for help.
INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTUR-
ER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL.
IMPORTANT POINTS WHEN VIEWING THE SCREEN
Obstacles on screen may feel farther away than they actually are.
There may be discrepancies between the top view image and the distance marker.
Objects such as people or vehicles may appear warped in the top view.
The representation of your vehicle in the top view image is not actually an image of your ve-
hicle viewed from above.
Objects in the camera image appear larger in relation to the representation of your vehicle
than they actually are.
When an obstacle is not on the ground, it may not be displayed in the top view and/or its
position may be displayed inaccurately relative to your vehicle.
When an object (person, pole, etc.) is in the seam between the camera images in the top
view (Ex.: black line on the boundary between the bird’s eye views of the side camera image
and the rear camera image), it may not be displayed in the top view, so make safety checks
using other camera images, your mirrors and direct visual checks.
SPECIFICATIONS
Voltage : DC 12V to 24V, Negative ground
Operating range : DC 10.8V to 28V
Consumption : <1A
Dimensions : 170 mm(W) x 54 mm (H) x 140 mm(D) (excl. bracket)
6-11/16” (W) x 2-1/8” (H) x 5-33/64” (D) (excl. bracket)
Weight : 1.25Kg (2.76lbs) (excl. bracket)
Declaration of conformity
We Clarion declares that the product EG-2300 is following the provisions of Di-
rective 2014/30/EU and Directive 2011/65/EU.
Authorized Representative
Clarion Europe S.A.S.
244 rue du Pré à Varois, 54670 Custines, France
TEL +33 3 83 49 44 00 FAX +33 3 83 24 17 62
PACKAGE CONTENTS
This device consists of the following components.
In the event of any defect, contact the retailer where it was purchased.
1
Camera ECU box ...................................................................................................................1
2
Mounting brackets .................................................................................................................. 2
3
M5 × 12 mm hex bolt with washer .......................................................................................... 4
4
12P electrical system cable (0.5 m (1.64ft)) .............................................................................1
5
32P connection cable (0.2 m (0.66ft)) .....................................................................................1
6
40P connection cable (0.18 m (0.59ft)) ...................................................................................1
7
Installation Manual ..................................................................................................................1
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Clarion EG-2300E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Clarion EG-2300E in de taal/talen: Engels als bijlage per email.

De handleiding is 0,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info