580505
35
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
33
CMV1
English
7. SYSTEM SETTINGS
Audio Settings
You can adjust a audio effect or tone quality to
your preference.
Adjusting the bass
2-1. Select “Bass”.
3-1. Press the [ENTER] button.
3-2. Turn the [UP/DOWN] knob to adjust the
gain from –7 to +7 (The factory default
setting is “0”).
3-3. Press the [RETURN] button to return to the
previous mode.
Adjusting the treble
2-1. Select “Treble”.
3-1. Press the [ENTER] button.
3-2. Turn the [UP/DOWN] knob to adjust the
gain from –6 to +6 (The factory default
setting is “0”).
3-3. Press the [RETURN] button to return to the
previous mode.
Adjusting the balance
2-1. Select “Balance”.
3-1. Press the [ENTER] button.
3-2. Turn the [UP/DOWN] knob to adjust the
balance of the right and left speakers.
* The factory default setting is “Center
(center). (Adjustment range: LEFT 12 to
RIGHT 12 (left 12 to right 12))
3-3. Press the [RETURN] button to return to the
previous mode.
Adjusting the fader
2-1. Select “Fader”.
3-1. Press the [ENTER] button.
3-2. Turn the [UP/DOWN] knob to adjust the
balance of the rear and front speakers.
* The factory default setting is “Center
(center). (Adjustment range: REAR12 to
FRONT12 (rear 12 to front 12))
3-3. Press the [RETURN] button to return to the
previous mode.
Adjusting the non-fader volume
Adjust volume output from the unit’s non-fader
output terminal.
2-1. Select “Non Fader Volume”.
3-1. Press the [ENTER] button.
3-2. Turn the [UP/DOWN] knob to increase or
decrease volume.
* The factory default setting is “0”.
(Adjustment range: -6 to +6)
3-3. Press the [RETURN] button to return to the
previous mode.
Setting the BBE MP
(Sound Enhancement and Restoration
for compressed audio files)
BBE MP (Minimized Polynomial Non-Linear
Saturation) Process improves digitally
compressed sound, such as MP3, by restoring
and enhancing the harmonics lost through
compression. BBE MP works by regenerating
harmonics from the source material, effectively
recovering warmth, detail and nuance.
* This fuction is effective for the audio files in the
USB mode and the iPod mode (while the iPod
Output Formart is set toDigital”).
* The factory default setting is “Off”.
2-1. Select “BBE MP”.
To change audio setting
1. Press the [AUDIO] button to switch to the
audio adjustment selection display.
2. Then turn the [UP/DOWN] knob to select
the audio adjustment mode.
Each time you turn the [UP/DOWN] knob,
the sound adjustment mode changes as
following order:
BassTrebleBalance
FaderNon Fader Volume
(“BBE MP”)
* BBE MP” can be selected only in the USB/
iPod mode.
3. Press the [ENTER] button.
4. Turn the [UP/DOWN] knob to adjust the
selected audio mode.
5. After completing settings, press the
[RETURN] button to return to the previous
mode.
280PE3260E_EN.book Page 33 Tuesday, March 24, 2009 3:41 PM
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Clarion CMV1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Clarion CMV1 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Clarion CMV1

Clarion CMV1 Gebruiksaanwijzing - Deutsch - 46 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info