455905
5
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
PART NAMES AND FUNCTIONS
1. Source input selector switch - These
switches are used to select the input
source assigned to each channel. Each
channel may only be assigned one input
source at a time.
2. Input gain - These knobs are used to
adjust the audio source signal input gain
for a channel. Never use the gain control
to adjust a channels output volume.
Setting the gain level properly will ensure
a clean output signal.
3. Channel EQ control - These knobs are
used to adjust the high, mid and low
range levels of a channel allowing for a
maximum midrange gain of 10dB or
maximum decrease of -35dB. Turning
the knob in a counterclockwise direction
will decrease the amount of high/mid/low
range applied to a channel signal, turning
the knob in a clockwise direction will
increase the amount of high/mid/low
applied to a channel signal.
4. Mic Ievel - Adjusts microphone level.
5. Mic treble/bass EQ - These knobs are
used to adjust the treble (or bass) levels
of the microphone with a maximum
signal gain of 12dB or maximum signal
decrease of -12dB. Turning the knob in a
counterclockwise direction will decrease
the amount of treble (or bass) applied to
the microphone signal, turning the knob
in a clockwise direction will increase the
amount of treble (or bass) applied to
microphone signal.
6. Channel fader - Adjusts the volume for
CH1 and CH2.
7. Mic ON/OFF/Talkover switch - To set
mic on and off, when switch at the
talkover position, the mic on, the sound
level for everything other than mic will
decrease to around 14dB.
8. PFL/Master switch - The position of
this switch will determine the level meter
mode. In the “Master” position, the meter
will detail the out level of the left and right
channels. In the “PFL” position, the left
side of the meter will indicate monaural
level of the PGM.
9. Crossfader - Used to mix the signals
from the 2 channels.
10. FX ON button - This button functions
as an effect Master on/off button and is
used to activate and deactivate the
effects.
11. Cue mixing - Used to preview
channel audio to your headphones.
Listen here before bringing up channel
faders or moving the crossfader.
12. Cue level - This knob is used to
adjust the headphone output level.
13. Master knob - Adjust the level of the
master output.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Citronic SMFX-200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Citronic SMFX-200 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info