455906
5
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
© 2010
OPERATION
Check mains for correct voltage as indicated near to the IEC mains inlet on the rear panel.
Connect to mains supply using the IEC cable provided.
Connect the Main unbalanced RCA and/or balanced XLR outputs to the main PA and
ensure that the volume levels are turned down to avoid damage.
Connect the BOOTH outputs to powered booth monitors or separate PA zone.
Connect any turntables to the RCA PHONO inputs on ch.1 and ch.2.
Earth turntables to the case grounding point on the rear panel
Connect CD players or other line output sources to the CD inputs.
Connect CD, CD+G, laptop, TV decoder, DVD or MP3 players to LINE inputs.
Connect DJ mic and Vocal mics 1 + 2 to the top panel jack/XLR combo sockets
If required, connect personal MP3 player to top panel 3.5mm input
Connect headphones to the HEADPHONE jack
With MASTER LEVEL down, switch the power on.
Ensure microphone levels are turned down
Gradually increase MASTER LEVEL and channel levels to check input signals.
Be aware that the CROSSFADER also operates across assigned channels - this can be
bypassed by pressing DEFEAT.
To use crossfader, select channels using the ASSIGN levers, ensure DEFEAT is off and the
crossfader will then seamlessly blend between these 2 channels.
Gradually increase microphone channel levels to check microphone signals.
Monitor each stereo channel via headphones selecting using the CUE switches
Whilst a channel is on CUE, adjust the GAIN so that LED meters show a full signal without
showing “in the red” (overload)
Adjust Hi, Mid and Lo EQ settings to the desired tonal effect
When using the DJ mic, push the ON AIR switch and if required, push MANUAL
OVERRIDE to drop the music level by a fixed amount whilst talking.
Adjust Hi and Lo EQ and DJ MIC level settings to suit.
For singers and karaoke, increase the levels of Vocal mics 1 + 2 and adjust Hi and Lo EQ
settings to suit.
For each vocal mic, adjust DELAY level to the desired amount, variation in the time between
delay repeats can be adjusted via the TIME rotary.
Should a different effect (eg. Reverb, compression, DSP) be required, connecting SEND on
the rear panel to an external processor’s input and the processor’s output(s) to the rear
panel RETURNS will serve as an effects loop, overriding the internal delay effect. The
DELAY controls will now act as an external effects mix.
When not being used, turn down the Vocal mic levels to avoid unwanted noise.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Citronic CDM 8 4 mkV bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Citronic CDM 8 4 mkV in de taal/talen: Engels als bijlage per email.

De handleiding is 0,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info