455889

Citronic CD-1.4 Handleiding

10
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
OWNERS MANUAL
VERSION 1.1
Safety information
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this item near water.
6. Clean only with dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacture’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or other items
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized plug. The wide blade is provided for your safety.
If the provided plug does not fit into the item or the mains socket, consult an electrician for
replacement.
10. Protect the power cord from being walked on or pinched particularly at plug, convenience
receptacles, and point where they exit from the item.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the
item. When a cart is used, use caution when moving the cart/item combination to avoid injury.
13. Unplug this item during lighting storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Serving is required when the item has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the item, the item has been exposed to rain or moisture, does not operate
normally, or has been dropped (note: accidental or cosmetic damage is not covered by the items
12 month warranty)
15. Please keep the unit in a safe environment.
16. Do not store anything on top of the item.
CAUTION:
To reduce the risk of electric shock, do not remove
any cover. No user-serviceable parts inside. Refer servicing to
qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert
the use to the presence of un-insulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the
presence of important operation and maintenance (servicing) instructions in the literature
accompanying this appliance.
DO NOT OPEN
RISK OF ELECTRIC SHOCK
1
y Auto Cue
y Digital output
y Pitch Display
y Frame Search
y Single/Continuous
y +10 Track skip search
y Pitch range: +/-4%, +/-8%, +/-16%
y 8 times over sampling 1 bit D/A converter
y Relay play allow consecutive playback during two decks
1. OPEN/CLOSE button (Disc Tray Open/Close) – This button is used to open and close the disc tray
door.
NOTE: When a disc is loaded, the tray will not open unless the unit is in pause or cue mode.
2. TRACK button – This button is used to select your desired track. Tapping the button will skip
backward to the previous track; holding down this button will rapidly skip backward through the tracks
on your CD.
3. +10 TRACK SKIP button – This button allows you to skip ahead by 10 tracks. Example: if you are at
Track #1, pressing this button will skip you to Track #11, press the button again, it will skip to Track #21.
If there are not that many tracks, it will go back to Track #1.
4.
TRACK button – This button is used to select your desired track. Tapping the button will skip forward to
the next track, holding down this button will rapidly skip forward through the tracks on your CD.
5. LIQUID CRYSTAL DISPLAY (LCD) – This high quality LCD Indicates all the functions (play, pause, cue,
etc..,), as they occur. This display is viewable at several comfortable angles as described on. The LCD
icons will be described in the next section.
MAIN FEATURES
GENERAL FUNCTIONS CONTROL UNIT
3
5
9
8
6
4
1
7
2
12
19
16
17
14 18
21
20
15
13
1110
22
23
2
6. PITCH SLIDER – This slider is used to adjust the playback pitch percentage when the PITCH function is
activated. The slider is a set adjustment and will remain set until the pitch slider is moved or the PITCH
function has been turned off. The maximum pitch range of the slider is +/-16%. This adjustment can be
made with or without a CD in the drive.
The pitch adjustment will remain even if a disc has been removed, and will reflect on any other disc loaded
into the unit. That is to say, if you set a +2% pitch on one disc, remove that disc and insert another, that
disc will also have a +2% pitch. The amount of pitch being applied will be displayed in the LCD. Use this
slider to match the BPM’s of this unit to that of another music source. By changing the pitch of one disc with
respect to the other in this way, the beats can be matched.
7. RELAY button – Use a standard Mini plug (stereo) to plug in Side1 to Side 2. Set both sides of the CD
player to single mode on the control. When Disc 1 ends the CD player will automatically change to Disc
2 and when Disc 2 ends it will return to Disc 1, etc.
8.
SEARCH button – This search button allow you to quickly scan backward through a track.
9. SEARCH button – This search button allow you to quickly scan forward through a track.
10. TIME button – The TIME button is used to change the displayed time values. Time can be displayed as
elapsed track time, remaining track time, and total disc remaining time.
11. SGL/CTN button – This button allows the unit's play mode to change between Single and Continuous. In
single mode the unit will play a single track and return to cue mode. In continuous mode the unit
continues to play track by track.
12. SHUTTLE WHEEL
Playback-mode:
Via the Shuttle-wheel, you can quickly scan forwards and backwards. Turn the Shuttle-wheel to the right
in order to scan forwards and turn it to the left in order to scan backwards. The further you turn the Shuttle
wheel the higher the scanning- speed.
Pause-mode:
In the pause-mode, the current frame is repeated as soon as you turn the Shuttle-wheel.
13. JOG WHEEL
13-1. Playback-mode: Y
ou can temporarily adjust the playback-speed by +/- 16 %.
13-2. Pause-mode:
In the pause-mode, the current frame is repeated as soon as you turn the Jog-wheel.
Via the Jog-wheel, you can slowly search within a title forwards and backwards. In this way, you
can easily find a Cue-point for example. Turn the Jog-wheel to the right in order to search
forwards and turn it to the left in order to search backwards. The faster you turn the Jog- wheel the
higher the searching-speed.
14. CUE button - Pressing the CUE button during playback immediately pauses playback and returns the
track to the last set cue point. The red CUE BUTTON LED will glow when the unit is in cue mode The LED
will also flash every time a new CUE POINT is set. The CUE button can also be held down to momentarily
play the CD. When you release the CUE button it instantly returns to the last set CUE POINT.
15. PLAY/PAUSE button – Each press of the PLAY/PAUSE BUTTON causes the operation to change from
play to pause or from pause to play. While in play mode the play LED will glow, and while in pause mode
the play LED will flash.
16. PITCH button – This button is used to turn the pitch function on and off. The pitch functions of the PITCH
SLIDER, PITCH BEND BUTTONS and JOG WHEEL will not function without this function being activated.
The pitch slider and pitch bend buttons have a maximum range of +/-16%. The "+" and "-" pitch bend
buttons have a maximum range of 16%.
GENERAL FUNCTIONS CONTROL UNIT
3
17. PITCH BEND BUTTONS
(-) PITCH BEND button – The (-) pitch bend function creates a momentary “Slow Down” in the CD’s
pitch speed (Beats per minute - BPM) when the PITCH function is activated. This function allows the beats
between two CD’s or any other music source to match.
This is a momentary function. When the button is depressed the pitch speed will automatically return to
PITCH SLIDER'S selected pitch. Holding down this button will give a maximum of -16% pitch. Be sure to
remember that this function is a momentary pitch adjustment, for a more precise adjustment use the
PITCH SLIDER to match the BPM’s with another playing music source.
(+) PITCH BEND button – The (+) pitch bend function creates a momentary “BUMP” in the CD’s pitch
speed (Beats per minute - BPM) when the PITCH function is activated. This function allows the beats
between two CDs or any other music source to match. This is a momentary function. When the button is
depressed the pitch speed will automatically return to PITCH SLIDER'S selected pitch. Holding down this
button will give a maximum of +16% pitch. Be sure to remember that this function is a momentary pitch
adjustment, for a more precise adjustment use the PITCH SLIDER to match the BPM’s with another
playing music source.
18. LOOP IN button – This function allows you to set the starting point of a loop.
19. LOOP OUT button – This button is used to set the ending point of a loop. A loop is started by pressing the IN
BUTTON, pressing the OUT BUTTON sets the loop ending point. The loop will continue to play until the OUT
BUTTON is pressed once again.
20. RELOOP button – If a LOOP has been made, but the CD Player is not actively in LOOP mode (a loop is not
playing), pressing the RELOOP BUTTON will instantly reactivate the LOOP mode. To exit the loop, press
the LOOP OUT BUTTON.
21. PITCH PERCENTAGE SELECTOR – Choose from pitch percentages of 4%, 8%, and 16%.
22. CONTROL START socket – These sockets are to connect to a mixer using a 3.5mm jack plug to give
remote start capability. When the switch contacts are shorted the respective unit will play, and similarly when
the switch contacts are open the player will be in pause mode.
23. CONTROL connector – Connect this connector to the REMOTE connector on the main unit using the
included control cord.
GENERAL FUNCTIONS CONTROL UNIT
4
1. CD TRAY – This tray is used to load and unload a compact disc into the mechanism. The tray is opened and
closed by pressing the OPEN/CLOSE BUTTON. Never attempt to force the transport tray open or closed
when the power is turned off.
2. OPEN/CLOSE button (CD Tray Open/Close) – This button is used to open and close the transport
tray. NOTE: When a disc is already loaded in the transport tray, the tray will not open unless the unit is
in pause or cue mode.
3. POWER SWITCH button – This switch is used to control the unit's main power. A blue LED directly
above the power switch will glow to indicate main power is active.
4. AUDIO OUT R & L sockets – These jacks send a left and right analog mono output signal. Use these jacks
to send standard audio to a mixer or receiver. The red colored jack represents the right channel output and
white jack represents the left channels output.
5. DIGITAL OUT socket – This jack sends a digital stereo out signal. Use this connection to create near
perfect copies of your disc to a Mini disc, CD-R, or any other recording device with a digital input.
6. VOLTAGE selector – 115V AC and 230V AC switch.
7. POWER connector – This is the main power connection. Only use the supplied polarized power cord.
Use of any other power may result in sever damage to the unit. Be sure the local power matches the
unit’s required power.
8. REMOTE jack - Connect the supplied 8 pin cable from this jack to the remote control's connector. This
will allow you to control the player functions with the remote unit.
GENERAL FUNCTIONS PLAY UNIT
5
1
2
3
8
4
5
4
7
2
1
6
5
1. TRACK INDICATOR – This 3-digit indicator details a current track. The number displayed in the track
indicator is a direct reference to a track being selected a track in play, pause, or cue mode.
2. TIME BAR INDICATOR - This bar visually details the time defined in the TIME METER (M, S, &F) as
with the TIME METER, this bar is also dependent on the selected time function TOTAL REMAIN, REMAIN
or ELAPSED. This bar will begin to flash when 15 seconds of a track remain and will begin to rapidly flash
when three seconds of a track remain. The flashing bar is a great visual reminder a track is about to end.
The flashing bar will function regardless of which time mode the unit is in.
3. MINUTES METER – This meter will display the elapse, total, or remaining time in minutes. The display
time will be indirect reference to the current time mode.
4. SECONDS METER – This meter will display the elapse, total, or remaining time in seconds. The display
time will be indirect reference to the current time mode.
5. FRAME METER – This meter will display the elapse, total, or remaining time in frames. The displayed
frames will be indirect reference to the current time mode.
6. SINGLE INDICATOR – This indicates the unit is in single play mode, the unit will play a single and return
to CUE mode. If the single indicator is not displayed, the unit is in continuous mode. In continuous mode the
drive will play through all the tracks on the disc.
7. REMAIN INDICATOR – This indicator is in direct reference to the TIME METER. When the REMAIN indicator
is displayed in the LCD, the time defined will refer to a single track's remaining time. The time mode is
changed by tapping on TIME button.
8. TOTAL REMAIN INDICATOR – This indicator is in direct reference to the TIME METER. When the TOTAL
REMAIN indicator is displayed in the LCD, the time defined will refer to a disc's total remaining time. The time
mode is changed by tapping on TIME button.
The unit will indicate the ELAPSED time when neither the TOTAL REMAIN OR REMAIN
indicators are showing.
9. PITCH METER – This meter displays the pitch percentage being applied to playback by the PITCH SLIDER.
If the meter read zero regardless of the PITCH SLIDER'S position, the PITCH function is not activated.
GENERAL FUNCTIONS LCD DISPLAY
1
3
4
5
2
6
7
8
9
6
1. Checking the Contents
Check that the carton contains the following items:
(1) Main Unit
(2) Controller Unit
(3) Operating Instructions (This Booklet)
(4) ONE (1) 8P cable right angle
(5) Two (2)2P RCA path cord (L/R)
(6) Two (2) Auto-start cable
(7) ONE (1) AC power cord
2. Installing the Units
(1) Place your unit on a flat surface or mount it in a secure rack mount case.
(2) Be sure the player is mounted in a well-ventilated area where it will not be exposed to direct sunlight, high
temperatures, or high humidity.
(3) Try to place the unit as far as possible from TVs and tuners, as the unit may cause undesirable
interference.
CAUTION:
The player will work normally when the main unit is
mounted with the front panel within 15 degrees of
the vertical plane. If the unit is tilted excessively,
discs may not be loaded or unloaded properly.
The control panel’s LCDs are designed to be clearly
visible within the angles. Mount the control unit so
that the visual angle is within this range.
3. Connections
(1) Turn off the POWER switch
(2) Connect the RCA pin cord to the input on your mixer..
(3) Connect the control cords to the REMOTE connector on the main unit.
CAUTION:
y Be sure to use the supplied control cords. Using another type of cable may result in damage.
y Be sure the power is off when connecting the control cords. Otherwise the units may not work properly.
PREPARATIONS
15
0
Main unit
45
0
5
0
Sight point
7
When you have finished using the CD player, before switching off the power, be sure that the disc holder had
been closed with the OPEN/CLOSE button.
CAUTION:
Do not forcibly close the disc holder when the power is off.
Do not switch off the power when the disc holder is
open.
To avoid damage, please don’t switch off the power
until “no disc” or “time code” is showed on the LCD
after the disc holder has been closed with the
Open/Close button.
POWER OFF POWER OFF
1.
Precautions on handling compact discs
y
Do not allow fingerprints, oil or dust to get on the surface of the disc.
y
If the disc is dirty, wipe it off with a soft dry cloth.
y
Do not use benzene, thinner, water, record spray, electrostatic-proof chemicals, or silicone-treated
cloths to clean discs.
y
Always handle discs carefully to prevent damaging the surface; in particular when removing a disc
from its case or returning it.
y
Do not bend the disc.
y
Do not apply heat.
y
Do not enlarge the hole in the center of the disc.
y
Do not write on the label (printed side) with a hard-tipped implement such as a pencil or ball point pen.
y
Condensation will form if a disc is brought into a warm area from a colder one, such as outdoors in
winter.
y
Do not attempt to dry the disc with a hair dryer, etc..
2.
Precaution on storage
y
After playing a disc, always unload it from the player.
y
Always store the disc in the jewel case to protect from dirt or damage.
y
Do not place discs in the following areas:
(1)
Areas exposed to directs sunlight for a considerable time.
(2)
Areas subject to accumulation of dust or high humidity.
(3)
Areas are affected by heat from indoor heaters, etc..
BEFORE SWITCHING OFF THE POWER
COMPACT DISCS
8
GENERAL
Dimensions: Main Unit 482(W)x 88.8(H)x 262.5(D)mm
Control Unit 482(W)x 88.8(H)x 97(D)mm
Weight: Main Unit 5.1Kg
Control Unit 1.7Kg
Power supply: AC 115/230V, 60/50Hz
Power consumption: 16.5W
Pitch control range: within+/-4%, +/-8%, +/-16%
Pitch bend: +/-16%
Pitch accuracy: +/- 0.15%
Digital out level 0.5V+/-0.1 p-p @ LOAD = 75 ohm (option)
AUDIO CHARACTERISTICS (TEST DISC: TCD-782, LOAD=47Kohm)
ITEM TYPICAL LIMIT CONDITION
Output level 2Vrms+/-0.5dB 2Vrms +/-1 dB 1KHz,0 dB
Channel balance WITHIN 0.1 dB WITHIN 1 dB 1KHz,0 dB
Frequency response 20-20KHz +/-0.4 dB 20-20KHz +/-1 dB 0dB OUTPUT
De-emphasis response -19.6~-20dB -19~-21dB 16KHz, -20 dB
Channel separation (*2) 89 dB 80dB 1KHz,0 dB
T.H.D. + NOISE (*1) 0.01% 0.03% 1KHz,0 dB
S/N (*2) 92dB 85 dB 1KHz.0 dB
NOTE: *1: WITH 20KHz LOW PASS FILTER.
*2: WITH 20KHz LOW PASS FILTER AND “IHF-A” WEIGHTED.
SEARCHING TIME (TEST DISC: TCD-792)
ITEM TYPICAL LIMITS CONDITION
Short access time 2 sec 4 sec Play next track
Long access time 4 sec 6 sec TRACK 1 TO 20,20 TO 1
PLAYABILITY
ITEM TYPICAL LIMIT CONDITION
Interruption 1mm 0.7mm TCD-725
Black dot 1mm 0.6mm TCD-725
Finger prints 75um 65um TCD-725
Eccentricity 140um 140um TCD-712 W/O TRACK JUMP
Vertical deviation 1mm 0.5mm TCD-731R
PICK-UP
System Object lens drive system optical pick-up
Object lens drive system 2 dimensional parallel drive
Tracking detection 3 spot beam detection
Optical source Semiconductor laser
Wave length 780nm
NOTES:
(1) The specifications are subject to change to any improvement by negotiations in advance.
(2) The parts are subject to change to any improvement within the range of the specifications.
SPECIFICATIONS
9
FOR MORE INFORMATION ON CITRONIC PRODUCTS VISIT
WWW.CITRONIC.COM
… 10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Citronic CD-1.4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Citronic CD-1.4 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info