12 13
4. Hand Reference Position Check and Correction
Reference position: This refers to the base position of each hand for enabling this
watch to function properly. Refer to the illustration below for the reference
position of each hand. If the reference position is not set properly, the time, date,
alarm ON/OFF positions and other watch functions will not be displayed properly.
Before using this watch, check that the functions of the watch operate properly by
performing the following procedure.
[Reference Position Check]
1. After pulling out the crown to Position 1 (second hand moves to the 30 seconds
position and waits), turn the crown to set the mode hand to the local time [L-TM]
mode.
2. Return the crown to the normal position.
3. Press button (A) for at least 10 seconds and then release after each hand begins to
move in coordination.
• The second hand rapidly advances forward (clockwise rotation), while the other
hands, including the function hand, rapidly move forward or backward.
• The date changes by one day when the function hand completes four revolutions.
<Correct Reference Positions of Each Hand>
<Reference Positions of Each Hand>
24 hour hand: 24:00
Hour hand, minute hand: 00:00
Second hand: 0 seconds
Function hand: SUN (SUN immediately after the date has changed to “1”)
Date: 1st
Perform the “Reference Position Correction” procedure if any of the hands or date are
not at the positions indicated above.
Button (A)
(1) Mode switching
position
(0) Normal position
