20 21
11. Using the Rotating Bezel
The rotating bezel can be used as a reference for elapsed time during diving or for the
amount of time remaining relative to a predetermined amount of time.
[Setting the Rotating Bezel]
* Only turn the rotating bezel to the left. It cannot be rotated in the opposite direction
(to the right) to prevent the risk of incorrect operation.
* Align the
▼
mark on the rotating bezel
with the minute hand. After a certain
amount of time has elapsed, the elapsed
time can be determined from the scale on
the rotating bezel.
Turning
direction
Elapsed time
Determination of Elapsed Time
* Please check that the second hand is moving properly.
If the second hand is moving at two-second intervals, this means that the watch is
not sufficiently charged. Sufficiently charge the watch when this occurs.
<During Diving>
* Never attempt to turn or pull out the crown underwater. This can cause defective
water resistance or other malfunction.
* Be careful to avoid bumping your watch on hard objects such as diving equipment
or rocks.
<After Diving>
* Completely wash off any sea water, mud or sand adhered to the watch with pure
water after checking that the crown and screw are tightened. Wipe off any excess
moisture with a dry cloth.
