46 47
14. All-Reset
This watch may not function properly as a result of being subjected to the effects of
static electricity, strong impact and so forth. When this happens, perform the All-Reset
and Reference Position Alignment procedures described below. When performing the
all-reset procedure, first make sure the watch is sufficiently charged and the second
hand is moving at 1-second intervals. If the all-reset procedure is performed when the
watch is insufficiently charged, it may not function properly or remain stopped
following the all-reset procedure.
[All-Reset Procedure]
1. Pull the crown out to Position 1 (the
second hand rapidly advances to the
30 seconds position and waits).
2. Turn the crown to align the mode
hand to the local time mode [L-TM].
3. Pull the crown out to Position 2
(local time setting position).
• The second hand rapidly moves to the current time and begins 1-second interval
movement.
4. Press buttons (A) and (B) simultaneously.
• Following a confirmation tone, each hand performs a demonstration movement.
5. This completes the all-reset procedure. Next, perform the reference position
alignment procedure for each hand and the calendar by referring to “4. Hand
Reference Position Check and Correction”.
Furthermore, if performing the reference position alignment procedure after
performing the all-reset procedure, perform steps 6 through 10 of the “Reference
Position Correction” described in “4. Hand Reference Position Check and
Correction”.
6. After having aligned the reference position, correctly reset the time, date and other
modes before using the watch.
Button (B)
(2) Local time
setting position
(0) Normal position
Button (A)
