<Insufficient Charge Warning Feature>
When the watch becomes insufficiently charged, the
watch switches to the time mode regardless of which
mode is displayed at that time, and the second hand
begins to move at 2-second intervals to indicate that the
watch is insufficiently charged.
• Although the watch continues to run normally at this
time, the watch ends up stopping if it remains
insufficiently charged for about 3 days. Sufficiently charge the watch by exposing to
light so that the second hand returns to 1-second interval movement. Continue to
charge the watch even after the second hand returns to 1-second interval movement to
ensure that the watch can be used comfortably. There no need to worry about
overcharging since it is equipped with an over charge prevention feature.
• Although the watch will begin to run when light is allowed to shine on the solar cell
after it has stopped as a result of being insufficiently charged, since the time is
incorrect, reset the watch to the correct time after sufficiently charging.
Notes:
• Alarm time and ON/OFF status continued to be stored in memory. However, the
alarm tone will not sound even if the alarm is set (ON).
• The set time (time difference) is retained in memory for the local time.
38 39
• Crown (mode switching) and button operations will not function.
• The time (including alarm and local time) and date cannot be corrected.
<Over Charge Prevention Feature>
When the secondary battery becomes fully charged as result of light shining into the
watch dial (solar cell), the over charge prevention feature is activated automatically to
prevent the battery from being charged further. This prevents the performance of the
solar cell and secondary battery from deteriorating no matter how much the watch is
charged, and lets you expose the watch to light without worrying about overcharging.
<Power Save Feature>
When power is no longer generated as a result of light
not shining continuously for 30 minutes or more on the
solar cell during the time or local time mode, the second
hand moves to the 0 seconds position and stops and the
power save feature is activated to reduce current
consumption.
• The 24 hour hand, hour hand and minute hand continue
to keep the correct time even when the watch is in the
power save mode.
2 seconds
2 seconds
