301131
43
Verklein
Vergroot
Pagina terug
1/266
Pagina verder
1-25
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.1
OL-14587-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Understanding Security Features for Cisco Unified IP Phones
Required Network Components
Support for 802.1X authentication on Cisco Unified IP Phones requires several
components, including:
Cisco Unified IP Phone—The phone acts as the 802.1X supplicant, which
initiates the request to access the network.
Cisco Secure Access Control Server (ACS) (or other third-party
authentication server)—The authentication server and the phone must both be
configured with a shared secret that is used to authenticate the phone.
Cisco Catalyst Switch (or other third-party switch)—The switch must support
802.1X so, it can act as the authenticator and pass the messages between the
phone and the authentication server. When the exchange is completed, the
switch grants or denies the phone access to the network.
Best Practices—Requirements and Recommendations
Enable 802.1X Authentication—If you want to use the 802.1X standard to
authenticate Cisco Unified IP Phones, make sure that you have properly
configured the other components before enabling it on the phone. See the
“802.1X Authentication and Status” section on page 4-41 for more
information.
Configure PC Port—The 802.1X standard does not take into account the use
of VLANs and thus recommends that only a single device be authenticated to
a specific switch port. However, some switches (including Cisco Catalyst
switches) support multi-domain authentication. The switch configuration
determines whether you can connect a PC to the phone PC port.
Enabled—If you are using a switch that supports multi-domain
authentication, you can enable the PC port and connect a PC to it. In this
case, Cisco Unified IP Phones support proxy EAPOL-Logoff to monitor
the authentication exchanges between the switch and the attached PC.
For more information about IEEE 802.1X support on the Cisco Catalyst
switches, refer to the Cisco Catalyst switch configuration guides at:
http://www.cisco.com/en/US/products/hw/switches/ps708/tsd_products
_support_series_home.html
Disabled—If the switch does not support multiple 802.1X-compliant
devices on the same port, you should disable the PC Port when 802.1X
authentication is enabled. See the
“Security Configuration Menu” section
43

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cisco ip phone 7931g bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cisco ip phone 7931g in de taal/talen: Engels als bijlage per email.

De handleiding is 5,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Cisco ip phone 7931g

Cisco ip phone 7931g Snelstart handleiding - English - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info