604997
10
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
Front Panel Description
9
Front Panel Description
The front panel of your cable modem provides status LEDs that indicate how well and at what state your cable
modem is operating. See Front Panel LED Status Indicator Functions, later in this guide, for more information
on front panel LED status indicator functions.
POW
ER
R
ECEIVE
DATA
SEND
CABLE
PC
LINE 1
TELEPHONE
LINE 2
BATTER
Y
LOW
REPLACE
BATTER
Y
by Scientific-Atlanta, Inc.
21 3 4 5 6 7 8 9
T11671
1 POWER—Illuminates solid green to indicate that AC power is being applied to
the cable modem. AC power must be available to recharge the battery.
2 RECEIVE DATA—Blinks to indicate that the cable modem is receiving data from
the cable network
3 SEND DATA— Blinks to indicate that the cable modem is sending data to the
cable network
4 CABLE—Illuminates solid green when the cable modem is registered on the
network and fully operational. This indicator blinks to indicate one of the following
conditions:
The cable modem is booting up and not ready for data
The cable modem is scanning the network and attempting to register
The cable modem has lost registration on the network and will continue
blinking until it registers again
5 PC—Illuminates solid green to indicate that an Ethernet/USB carrier is present
and blinks to indicate that Ethernet/USB data is being transferred between the
PC and the cable modem
6 LINE 1—Illuminates solid green when telephone line 1 is in use
7 LINE 2—Illuminates solid green when telephone line 2 is in use
8 LOW BATTERY—Illuminates to indicate that approximately 20 percent of charge
is remaining in the battery.
9 REPLACE BATTERY—Illuminates to indicate that the battery could not be fully
charged. While the battery may be able to provide some backup power, it should
be replaced to restore maximum capacity.
Notes:
After the cable modem is successfully registered on the network, the POWER
(LED 1) and CABLE (LED 4) LEDs illuminate continuously to indicate that the
cable mode is active and fully operational.
LEDs may behave differently when the cable modem is running on battery power
(without AC power). Most LEDs are disabled if the unit is operating on battery
power. In this mode, the POWER and CABLE LEDs blink to indicate that the unit
is operating under battery power but AC power has failed.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cisco DPX2203C bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cisco DPX2203C in de taal/talen: Engels als bijlage per email.

De handleiding is 2,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info