EnglishEnglish
Programming- Engineer Mode
The machine’s program is memorized on the CPU - DISPLAY cards.
The machine is programmed with a “standard program” in the factory. To read and change the set data the programming function is accessed as
follows:
Touch the sensor with the “technician’s key”.
The sound of the buzzer indicates “recognition” of the key and the word
“TECHNICIAN” appears on the display.
Read-only display
Read-only display.
The meter counts each coffee dose dispensed.
Press “+” or “-” to change.
Keep the reset button pressed to reset, the
buzzer indicates that the operation is in course
Keep the reset button pressed to reset. When the
number is reset, the partial total of the previous
display will also be reset. The buzzer indicates
that the operation is in course.
Day Time
N° coffee: 00
N° water: 00
N° cycles 1300
Working time
Hour ON: 8:00 A.M.
N° milk: 00
Reset : press >>>
Total cups 0000
Reset : press >>>