Handleiding Chicco Polly Progres 5 (pagina 15 van 116) (Alle talen)

767863

Verklein

Vergroot

Pagina terug

1/116

Pagina verder

D. Cover

D1. Main cover

D2. Upper cover

D3. Zipper for upper cover removal

D4. Zipper for compact chair mounted seat use

E. Tray

E1. Tray covers

E2. Fastening/adjustment central button

E3. Fastening hooks

TIPS FOR CLEANING AND MAINTENANCE

The cleaning and maintenance operations shall only be

carried out by an adult.

Cleaning

Clean the fabric cover with a soft cloth soaked in water

or a neutral detergent. To remove the fabric cover from

the high chair repeat, in reverse order, the operations

described to x the fabric cover to the structure. Clean

the plastic parts with a soft cloth soaked in water. Nev-

er use abrasive detergents or solvents. If the high chair

comes into contact with water, dry the metal parts to

prevent the formation of rust.

Maintenance

Keep the high chair in a dry place.

To avoid friction that may compromise the correct func-

tion of the high chair, ensure that all the moving plastic

parts located along the metal frame are free from dust,

dirt or sand.

If necessary, lubricate the moving parts with dry silicone

lubricant.

WARNING: Check that the fabric and stitching are in

good condition each time you wash it.

Outer cover: PVC

Padding: Polyester

FIRST USE/OPENING

WARNING: The product is inserted in the packaging

wrapped in protective lm. When removing, make sure

you avoid damaging the product and its additional

components with sharp instruments. Once the product

is open, remove the packaging components immedi-

ately and keep out of the reach of children. Insert the

rear wheels (A6) in the specic slots (Fig.1), pushing

them in as far as they will go.

IMPORTANT WARNING:

PLEASE READ THESE INSTRUCTIONS CARE-

FULLY AND KEEP FOR FUTURE REFERENCE.

To open the frame, press simultaneously the A5 open-

ing/closing buttons, distancing the front legs A1 from

the rear legs A2 (FIG.1A) until the click indicates the

complete opening (FIG.2).

WARNING: Pressing the two B4 buttons at the same

time, will release the legrest B2 from the rest position.

After having released the legrest from the rest position,

turn the legrest B2 towards the front part of the seat

base until reaching the desired position for use (FIG.3).

Adjust the height of the seat base bringing it to the high-

est position, supporting the base from below (FIG.4).

Insert the footrest B3 in one of the three slots (FIG.5)

turning it until it locks.

To reattach the chair booster seat to the structure:

- Reposition the buckles and the harness C14a-b from

their slot compartments C12 and close the compart-

ments as shown in FIG.26.

Fasten the seat C to the base (FIG.6) rstly inserting the

rear pin C15 in the fastening slot B5. Then, press the

buttons C1 (FIG.7) at the same time, turning the seat to-

wards the front part until the front pins C16 are locked

into position. To put the cover on the seat C, the cover D

must be tted from the top to the bottom until it ts in

the upper removable backrest part C5.

WARNING: Ensure that the elastic on the back of the

aps and the cover always remains inside, in the space

between the xed backrest C4 and the back of the cover.

Now insert the safety harness C13 xed to the backrest

by passing it through the corresponding holes on the

cover surface D.

WARNING: For the correct movement of the safety har-

ness C13, do not close the zipper D4.

WARNING: For a complete xing of the seat, the buck-

les and the harness must be placed in the special com-

partments.

WARNING: Make sure that the seat is correctly fastened

to the base before placing the child on it.

Put the fabric cover D on the seat C, inserting the safety

harness C13 in the appropriate slots (FIG.8). Make sure

that the positions of the holes on the fabric cover corre-

spond to those on the backrest.

SAFETY HARNESS

WARNING: The use of the safety harness with fabric

crotch strap is essential to guarantee your child’s

safety.

WARNING: The tray alone does no guarantee the safety

of your child. Always use the safety harness!

The high chair has a 5-point safety harness.

Release the safety harness, put the child on the high

chair and secure the child with the harness, adjusting its

length in order to suit to the child.

The safety harness can be adjusted to two height po-

sitions.

The buckle may be released by pressing the central but-

ton (FIG.9).

The abdominal harness might be adjusted by pulling

the ends to shorten it or by pressing the rear levers on

the buckle to release it (FIG.10).

TRAY POSITIONING/ADJUSTMENT

The tray can be adjusted to 4 dierent positions.

To fasten the tray E, make sure that the armrests C2 are

locked in horizontal position (FIG.11).

Insert the armrests in the guides below the tray, keep-

ing the central fastening button pressed (FIG.12).

Move the tray to the desired position and release the

button. If the tray is not automatically locked on the

armrests, move the tray until a click is heard, indicating

that the tray is locked (FIG.13).

WARNING: before use, always check the correct fasten-

ing of the tray on the armrests.

WARNING: the tray may only be adjusted to the 4 indi-

cated positions .

WARNING: never leave the tray tted in a position in

which the danger signs are visible on the armrests: This

position is NOT safe!

WARNING: When the tray is tted on the product,

make sure to avoid the inadvertent pressing of the arm-

rest tilting buttons.

To remove the tray, press the central button E2. When

not in use, the tray may be fastened to the rear legs

of the structure (FIG.14). The high chair is equipped with

a tray cover. It can be fastened to the tray sides with a

pressure mechanism.

WARNING: When in use, always make sure that the tray

is correctly fastened. If the child eats at the table with

the parents, the tray cover may be used as a convenient

tablecloth.

HEIGHT ADJUSTMENT

The high chair can be adjusted to 8 height positions.

To raise the seat, hold the upper part of the backrest

C4/C5 and pull it upwards, until the desired height is

reached (Fig. 15).

To lower the seat, press the two B1 buttons at the

same time, lowering the seat until the desired height is

reached (Fig.16 ).

WARNING: do not carry out this operation with the

child sitting in the high chair.

HOW TO CLOSE THE CHAIR

WARNING: when performing this operation, ensure

that your child, or other children, are at a safe distance.

Make sure that during these operations the movable

parts of the high chair do not come into contact with

your child.

- Place the backrest in vertical position (FIG.17), remove

the tray and t it to the rear legs (FIG.14), then tilt the

armrests by pressing the buttons C3 (Fig.18).

- Completely lower the seat by pressing the two height

adjustment buttons B1 at the same time (FIG.16).

- Press the opening/closing buttons A5 located at the

centre of the lateral joints and at the same time ap-

proach the legs of the high chair (Fig.19).

- With the tray tted on the rear legs, make sure to avoid

complete tilting of the legrest (Fig.20).

LEGREST

The high chair is equipped with a legrest B2 that can be

Chicco Polly Progres 5 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Chicco Polly Progres 5

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info