747192
65
Verklein
Vergroot
Pagina terug
1/78
Pagina verder
65
9.1.2.2. Locking of the sampling frequency
As default, the sampling frequency is locked to V1.
If V1 is missing, the instrument attempts to lock to V2, then to V3, I1, I2, and I3.
9.1.2.3. AC/DC
The PEL makes AC and DC measurements for AC and DC distribution networks. AC or DC is selected by the user.
The AC + DC values are available with PEL Transfer.
9.1.2.4. Neutral current measurement
Depending on the distribution network, if there is no current sensor on the IN terminal, the neutral current is determined by calculation.
9.1.2.5. "200ms" quantities
The instrument calculates the following quantities every 200 ms on the basis of measurements on 10 periods for 50Hz, 12 periods
for 60Hz, and 80 periods for 400Hz, as indicated by Table 21.


9.1.2.6).

9.1.2.6. "1 s" quantities (one second)
The instrument calculates the following quantities every 200 ms on the basis of measurements on 50 periods for 50Hz, 60 periods
for 60Hz, and 400 periods for 400Hz, as indicated by Table 21.

the real-time values
the trends
9.1.2.7).


9.1.2.7. Aggregation
An aggregated quantity is a value calculated over an aggregation period as indicated by Table 22.
The aggregation period always starts at the beginning of an hour or of a minute. The aggregation period is the same for all quanti-
ties. The possible periods are the following: 1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30 and 60 min.
All aggregated quantities are recorded on the SD card during the recording session. They can be displayed in PEL Transfer (See § 5).
9.1.2.8. Minimum and maximum
The Min and Max are the minimum and maximum values observed during the aggregation period considered. They are recorded
with their dates and times (see Table 22). The Max of some aggregated values are displayed directly on the instrument.
9.1.2.9. Energy calculations
The energies are calculated every second.
The total energy is the demand during the recording session.
The partial energy can be determined for one of the following integration periods: 1h, 1 day, 1 week or 1 month. The partial energy
index is available only in real time. It is not recorded.
On the other hand, the total energies are available with the data of the recorded session.
65

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Chauvin Arnoux PEL105 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Chauvin Arnoux PEL105 in de taal/talen: Engels als bijlage per email.

De handleiding is 11,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info