664853
4
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
Free-standing
The Wall Bracket can also be used as a tabletop stand.
Turn the Wall Bracket upside down so that the arrow is pointing downwards, and
align the screw hole underneath the Control Panel Battery Cover with the screw
hole on the Wall Bracket. Use the remaining screw to secure in place.
Warning:
A weak WiFi signal can seriously affect the performance of this Security Alarm
System. Please make sure that the Control Panel is located as close as possible to
the main Router for optimal connectivity.
Door/ Window Sensor:
Step 1: To power up the Sensor, remove the Battery Tab
Step 2: Attach the Adhesive Pads to the back of the Transmitter and Magnet
Step 3: Place the Sensor on the door/ window frame and the magnet on the door/
window ensuring that the distance between them is not greater than 1cm when the
door/ window is shut.
1cm
PIR Motion Sensor:
Warning - Do not install
O
N
2-2.2m
Ground
Facing direct sunlight
Near air conditioning/ heat
sources
Facing moving objects
Horizontal orientation
Vertical orientation
Replacing Accessory Batteries
Remote Control
Remove the screw Open the casing
Door/Window Sensor
Open the casing
FAQ
Failed to connect to the WiFi
the App, please make sure that your local WiFi network is available and working
properly.
Check that the WiFi name and password are correct.
Connect to a 2.4G WiFi network instead of 5G
Check that the Power Adapter is connected to the Control Panel.
Re-linking the Control Panel to the Router again by following the steps on page 7
The WiFi indicator and the status indicator are on, but I can’t control the alarm by
App
Check that your smartphone is connected to a WiFi network.
Wait a few minutes to see if the WiFi indicator and the status indicator start
Panel is located in an area with good WiFi coverage and then re-pair with your local
WiFi network.
No response from the Control Panel when a Sensor is triggered
The Sensor is not within range of the Control Panel.
Check that the Sensor has been successfully paired to the Control Panel: Press any
Button on the Remote Control, arm the system and separate the Contact from the
Magnetic Sensor or press the Test Button on the Motion Sensor. You can re-pair
the Sensor to the Control Panel by following the instructions in the App – [Edit
Accessories] – [Show Me How]
I can’t Arm or Home Arm (Part Arm) my alarm by App
If the alarm has been triggered and hasn’t been disarmed and a user tries to Arm or
How to delete an Accessory
You can delete any Sensor in the App by going to [Edit Accessories] and tapping
the ‘bin’ icon in the top right hand corner of the screen.
To delete all accessories press and hold the [Learn] button inside the Control Panel
for 3 seconds, the Control Panel will beep once to indicate that all accessories have
been deleted.
No sound when alarming
Check that the Control Panel Alarm volume is not set to mute and the ring time is
not set to ‘0’.
Adjust the volume and the ring time accordingly.
How to reset the alarm system
Press and hold the [WiFi] button inside the Control Panel for 7 seconds.
You will hear one short beep after 3 seconds and then a long beep after another 4
seconds.
The reset has been completed and all the settings have been restored to default
conditions.
Please note that this process does not delete any Sensors.
Delete User (submenu `More') within the App, but make sure the panel has been
connected with WiFi network before the operation.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Chacon 34948 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Chacon 34948 in de taal/talen: Nederlands, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 32,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info