Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
앬 Read the operating instructions carefully and
comply with them. It is important to consult these
instructions in order to acquaint yourself with the
unit, its proper use and safety regulations.
앬 Keep this manual in a safe place, so that the
information is available at all times.
앬 If you give the equipment to any other person,
give them these operating instructions as well.
We accept no liability for damage or accidents
which arise due to non-observance of these
instructions.
1. Safety regulations
The corresponding safety information can be found
in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Explanation of the warning signs on
the equipment (see Fig. 8)
1 = Read the directions for use before operating the
equipment
2 = Wear ear guards and goggles
3 = Keep all other persons away from the danger
zone.
4 = Caution! -Sharp blades- Before carrying out any
maintenance work or if you damage the cable,
pull the plug out of the socket.
5 = Caution: The cutters continue to run after the
motor is switched off
6 = Do not expose the equipment to rain or moisture.
7 = Caution: Keep the power cable away from the
cutters!
3. Layout (Fig. 1 / 2)
1. ON/OFF switch
2. Cable strain-relief clamp
3. Carry handle
4. Grass basket
5. Ejector flap
6. Mains plug
7. Top push bar
8. Bottom push bar
9. Fastening screws for bottom push bar
10. Fastening screws for top push bar
11. Cable clips
12. Grass box housing halves
13. Grass box handle
4. Proper use
The lawn mower if designed for use in private
gardens.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Technical data
Voltage: 230 V ~ 50 Hz
Power input: 900 watts
Motor speed: 3600 rpm
Cutting width: 30 cm
Cutting height adjustment: 25-60 mm; 3 levels
Volume of catch bag: 28 liters
L
pA
sound pressure level: 72,8 dB(A)
L
WA
sound power level: 96 dB(A)
Vibration at the handlebars a
hv
: < 2,5 m/s
2
Protection class II/쏾
11
GB
