580485
23
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
23
M
M
o
o
t
t
o
o
r
r
D
D
r
r
i
i
v
v
e
e
To allow tracking of celestial objects, Celestron offers a single axis DC motor drive for the AstroMaster equatorial
mount. Once polar aligned, the motor drive will accurately track objects in Right Ascension as they move across the
sky. Only minor adjustments in Declination will be necessary to keep celestial objects centered in the eyepiece for long
periods of time. Models # 21069 and # 31051 come standard with this motor drive and it is attached to the mount but
you will have to remove it to install the battery (remove the motor drive by doing the reverse of the installation
instructions and install the battery per information below and then reinstall the motor drive). The motor drive is sold as
an optional accessory (Model # 93514) for other models.
Installation of the Motor Drive – for those purchasing it as an optional accessory.
The motor drive attaches to the AstroMaster equatorial mount via a flexible coupler that mounts to the R.A. slow motion
shaft and a motor bracket that holds the motor in place. To install the motor drive see the description and photos below:
1. Make sure the R.A. slow motion cable is attached to the R.A. shaft opposite of the latitude scale.
2. Remove the Allen head bolt located on the side of the polar shaft.
3. Slide the open end of the flexible motor coupler over the R.A. shaft. Make sure that the screw on the flexible
motor coupler is positioned over the flat portion of the R.A. shaft.
4. Tighten the motor coupler screw with a flathead screwdriver.
5. Rotate the motor on the shaft until the slotted cutout on the motor bracket aligns with the threaded hole in the
center of the mount’s latitude pivot axis.
6. Place the Allen head bolt through the motor bracket and thread it into the hole on the side of the pivot axis.
Then, tighten the bolt with an Allen wrench.
Figure 4-11 Figure 4-12
Operating the Motor Drive
The motor drive is powered by one 9-volt alkaline battery. This can power the drive for up to 40 hours, depending on
motor speed setting and ambient temperature. To install the battery, unscrew the two mounting screws – Figure 4-11.
Remove the control panel plate from the motor assembly and then remove the motor bracket from the motor. Then, you
will be able to get to the battery connected to cables for installing or replacing. Finally, reverse all steps to remount the
motor drive to the mount.
The motor drive is equipped with a speed rate regulator (in Figure 4-11 it is above the mounting screw) that allows the
motor drive to track at a faster or slower speed. This is useful when observing non-stellar objects like the moon or Sun
which travel at a slightly different rate than the stars. To change the speed of the motor, slide the On/Off switch to the
“ON” position and the red power indicator light will illuminate. Then, turn the speed rate regulator knob clockwise to
increase the speed of the motor and counterclockwise to decrease the speed.
To determine the proper rate of speed, the telescope should be roughly polar aligned. Find a star on the celestial equator
(approx. 0° declination) and center it in a low power eyepiece. Turn the drive on and let the telescope track for 1 or 2
minutes. If after a few minutes, the star drifts to the West, the motor is tracking too slowly and you should increase the
motor speed. If the star is drifting to the East, then decrease the motor speed. Repeat this process until the star remains
centered in the eyepiece for several minutes. Remember to ignore any star drift in declination.
The drive also has a “N/S” switch to be set if operating in the Northern or Southern Hemisphere.
Motor Coupler
Motor Bracket
and Allen Bolt
Behind motor
Mounting
Screws
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Celestron AstroMaster 130 EQ-MD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Celestron AstroMaster 130 EQ-MD in de taal/talen: Engels als bijlage per email.

De handleiding is 10 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Celestron AstroMaster 130 EQ-MD

Celestron AstroMaster 130 EQ-MD Gebruiksaanwijzing - Deutsch - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info