508115
18
Verklein
Vergroot
Pagina terug
1/21
Pagina verder
ENG-35ENG-34
ENG
60 80 100 120 140 160 180 200
rpm
Cadence
CDC.ZONE
80 - 120 rpm
Cadence zone
Default zone
Target training zone
Alarm
ZONE
Trouble shooting
If a malfunction occurs, check the following before contacting CatEye or your retailer for
repair or service.
Trouble on display
Use of the target zone
When the target cadence zone is turned On, cadence is monitored against set zone range.
When the cadence is out of the zone during measurement, the computer sounds an alarm
and notifies a rider by flashing .
For training aiming at a cadence of 80 to 120 rpm, set the lower limit to 80 and upper limit
to 120.
Then, the computer emits an alarm when the cadence falls below 79 rpm, or rises above
121 rpm.
Once the target zone is set to On, the relevant data are recorded to the file and the time in
zone the time in the zone, time above the zone, and time below the zone and their percent-
ages can be viewed in the file view (page 23).
* You can enter any upper/lower limit to the zone.
* For the target zone, you can change on/off and the upper/lower limit of the target zone
from the menu screen Setting the target cadence zone (page 33).
* On/off of the alarm sound is selected from the menu screen Setting sound (page 32).
Trouble Check Items Remedy
Display motion be-
comes slower.
Flashes on the
screen.
No displays appear.
Meaningless display
appears.
Cannot measure the
trip speed (cadence)
Is the surrounding temperature
low (below zero degree Celsius
or 32 degrees Fahrenheit)?
Temperatures below freezing may re-
sult in slower screen response. Data
is not affected.
The remaining battery ca-
pacity for the computer is
low.
Replace it with a new battery
(CR2032) immediately.
After replacement, be sure to perform
the restarting operation (page 10).
Is the battery for the com-
puter empty?
Replace it with a new battery
(CR2032).
After replacement, be sure to perform
the restarting operation (page 10).
Perform the restarting operation
(page 10).
Have you checked the sensor ID?
Is the computer ID Synch'ed
with somebody else's sensor?
Is the Speed and Cadence
sensor icon on
, ?
Check whether the distance
between the speed (ca-
dence) sensor and the mag-
net is too large.
Is the sensor zone of the
speed (cadence) sensor off
the center of the magnet?
Has the power-saving function
been activated, showing only
date/clock on the screen?
Is the battery for the speed
sensor empty?
Check the speed sensor ID (page 28)
for SP1 (speed sensor 1) or SP2
(speed sensor 2).
If the Speed and Cadence sensor
icon is off
, , the computer can-
not receive data. Press the M1/+ or
M2/- button once to turn on the icon.
Adjust the position of the speed (ca-
dence) sensor and that of the mag-
net correctly. (See How to install the
unit on your bicycle on page 6.)
Press any button on the computer
to cancel the power-saving function.
Replace it with a new battery
(CR2032).
After replacement, be sure to press
the RESET button on the speed
sensor.
Continue
Pressing the LT button
does not turn on a light.
Check whether lights
up on the computer screen.
The remaining battery ca-
pacity for the computer is
low.
Replace it with a new battery
(CR2032).
After replacement, be sure to
perform the restarting operation
(page 10).
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cateye V2c bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cateye V2c in de taal/talen: Engels als bijlage per email.

De handleiding is 0,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cateye V2c

Cateye V2c Gebruiksaanwijzing - Nederlands - 21 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info