602319

Cateye CC-SC100B - Padrone Smart plus Handleiding

151
Verklein
Vergroot
Pagina terug
1/154
Pagina verder
Usage Instructions
For troubleshooting related to the smart computers or to Cateye Cycling™, see "Frequently
Asked Questions".
* For explanatory purposes, in this manual red text/icons on the smart computer screen
represent flashing items.
* The display screens and illustrations used in this manual are provided for instructional
purposes only. Actual screens and illustrations may differ depending on devices used.
* The online manual and YouTube videos for this product are subject to change without
notice.
To use Padrone Smart+, the “Cateye Cycling™” smartphone application (free of charge) is
required.
For the latest information on the smartphones that are compatible with Cateye Cycling™
operations, see “Cateye Cycling™ Recommended Devices”.
Setup Flowchart
Usage Instructions
5. Mounting the bracket
6. Mounting the speed (cadence) sensor
(ISC-12)
(Optional)
7. Wearing the heart rate sensor (HR-12)
(Optional)
3. Pairing with smart computer
4. Pairing with a sensor
(If you have sensors)
2. Install Cateye Cycling™
1. Checking package contents
The setup procedure is as follows.
After setup is complete, please see How to Use.
1. Checking package contents
Setup Flowchart
! Smart computer unit
! Accessories
Bracket band
Bracket
Bracket rubber pad
Dial
* The Speed + Cadence Kit includes an integrated speed (cadence) sensor (ISC-12) in
addition to the items above.
* The Triple Wireless Kit includes an integrated speed (cadence) sensor (ISC-12) and a heart
rate sensor (HR-12).
* Check button locations before starting set up.
5. Mounting the bracket
3. Pairing with smart computer
4. Pairing with a sensor
(If you have sensors)
2. Install Cateye Cycling™
Usage Instructions
6. Mounting the speed (cadence) sensor
(ISC-12)
(Optional)
7. Wearing the heart rate sensor (HR-12)
(Optional)
5. Mounting the bracket
3. Pairing with smart computer
4. Pairing with a sensor
(If you have sensors)
2. Install Cateye Cycling™
1. Checking package contents
Setup Flowchart
1. Install Cateye Cycling™.
If using an iPhone
If using an Android smartphone
* See Cateye Cycling Recommended Devices for the latest information about
smartphones recommended for use with Cateye Cycling™.
2. Launch Cateye Cycling™.
Follow the on-screen instructions and allow the use of GPS and Bluetooth® devices.
Once basic settings are complete the Trip screen appears.
To continue, refer to "Pairing with smart computer".
When the smartphone's Bluetooth settings are turned on, it will search for devices, but
do not configure settings at this stage. Switch to Cateye Cycling™ and follow the
procedure below.
Important
Smartphone
Install the Cateye Cycling™ smartphone app (free) on the smartphone to be used.
Usage Instructions
6. Mounting the speed (cadence) sensor
(ISC-12)
(Optional)
7. Wearing the heart rate sensor (HR-12)
(Optional)
3. Pairing with smart computer
2. Install Cateye Cycling™
1. Checking package contents
Setup Flowchart
• Pairing is necessary to use a smart computer or a sensor.
• Do not pair sensors at a race venue or in similar locations where there are a lot of other
users.
Doing so may cause the smart computer to be paired with another device.
Important
The following section explains how to format (initialize) the smart computer and then pair with
a smartphone.
Smart computer
1. Pull free the smart computer's insulation sheet.
After pulling out the insulation sheet, return the battery holder and battery cover to their
previous locations.
2. Press the AC button on the smart computer.
The initialization screen is displayed.
Open
Close
Insulation
sheet
Battery holder
The display switches to the smartphone search screen.
Smartphone
4. From (MENU) at the top left of the screen, turn on [Connect] and tap
[Device].
Tap [Pair to Device] to start pairing.
When Cateye Cycling™ detects smart computer, a message is displayed on the
smartphone.
Tap [Pairing] to complete pairing.
* If you are using an iPhone, a subsequent message will be displayed.
Tap [Pair] again.
* Tap [Smart computer name] to display the settings configuration screen for the various
smart computer settings.
Device
Confirm
3. Verify that [FORMAT] is flashing, and press MODE for 1 second.
All data will be deleted and smart computer will be reset to factory default settings.
Caution
Usage Instructions
5. Mounting the bracket
6. Mounting the speed (cadence) sensor
(ISC-12)
(Optional)
7. Wearing the heart rate sensor (HR-12)
(Optional)
4. Pairing with a sensor
(If you have sensors)
Smart computer pairing is now complete.
If you have sensors, proceed to "Pairing with a sensor". If you do not have sensors, skip to
"Mounting the bracket".
3. Pairing with smart computer
4. Pairing with a sensor
(If you have sensors)
2. Install Cateye Cycling™
1. Checking package contents
Setup Flowchart
Tap [Pair to Device] to start pairing.
2. Activate the sensor.
Activating the sensor
When Cateye Cycling™ detects the sensor signal, a message is displayed on the
smartphone.
Tap [Pair]. The synchronized sensor is displayed on the [Device] screen and pairing is
completed.
* When pairing a sensor with Cateye Cycling™, an "A" is displayed after the sensor name.
* If you have paired a sensor capable of speed measurement, proceed to step 3.
• Pair all sensors that you intend to use.
• When using an iPhone, you cannot sync settings of commercial sensors.
When measuring in Sensor Direct Mode, it is necessary to configure sensor settings
separately via smart computer.
1. Switching to Sensor Direct Mode
2. Pairing a smart computer with a sensor
3. Tire circumference setting
Important
Smartphone
1. Verify that [Connect] is set to ON in the (MENU), and then tap
[Device].
Smart computer can be used with sensors compatible with Bluetooth 4.0. Pair it with optional
accessories or commercial sensors as required.
3. Set the tire circumference for a sensor capable of speed measurement.
Tap [Device], and then tap [Sensor name] > [Tire Circumference] (the length of the outer
circumference of the tire).
Select the tire circumference according to the tire size written on the side of the tire.
Determining tire circumference
* Default value: 2096 mm (700x23c)
* Requires to set tire circumference for each sensor.
* You can also change sensor names and cancel pairing from this screen.
Sensor pairing is now complete.
* If you want to pair another sensor, repeat the same procedure again.
Usage Instructions
5. Mounting the bracket
6. Mounting the speed (cadence) sensor
(ISC-12)
(Optional)
7. Wearing the heart rate sensor (HR-12)
(Optional)
Cadence, heart rate, and power data will not be displayed under the initial configuration.
Change the measurement screen to be able to display measured values from paired
sensors.
Changing the measurement screen
Important
Switching to Sensor Direct Mode
Pairing with a sensor
Switch from Mirror Mode to Sensor Direct Mode.
Smartphone
1. Close Cateye Cycling™ or from (MENU), turn off [Connect].
Smart computer
2. From the smartphone search screen, press MODE for 1 second to switch
to Sensor Direct Mode.
* Smart computer will search for a sensor instead of your smartphone. In this mode, the
sensor icon flashes to indicate sensor reception status.
• S (Flash): When the speed signal is received
• C (Flash): When the cadence signal is received
• S/C (S and C flash simultaneously): When the speed/cadence (ISC) sensor signal is
received
• H (Flash): When the heart rate signal is received
• P (Flash): When the power signal is received
Sensor Direct Mode and Mirror Mode measure independently and data has no
continuity.
Important
(1 second)
Smartphone search
screen
Measurement
screen
Pairing a smart computer with a sensor
Tire circumference setting
Switching to Sensor Direct Mode
Pairing a smart computer with a sensor
1. From the measurement screen, press OPTION for 2 seconds to switch to
the sensor pairing screen.
* When the sensor pairing screen is left on for 1 minute, the smart computer returns to the
measurement screen.
2. Press SS/LAP to start pairing.
3. Activate the sensor that you want to pair.
Activating the sensor
The name of the synchronized sensor is displayed and pairing is completed.
(2 seconds)
Sensor pairing
screen
Measurement
screen
Sensor
activated
Synchronizatio
n complete
Ready for
synchronization
Pairing with a sensor
• Pairing (sensor ID synchronization) must be performed in order to use a sensor.
• Do not pair sensors at a race venue or in similar locations where there are a lot of other
users. Doing so may cause the smart computer to be paired with another device.
• Pair all sensors that you intend to use.
Currently, only Bluetooth sensors that comply with Bluetooth Low Energy (BLE) profiles can
be used in Sensor Direct Mode.
Important
Pair a sensor that you want to use with smart computer.
• SP : Speed sensor
• ISC : Speed/cadence sensor
• CD : Cadence sensor
• HR : Heart rate sensor
• PW : Power sensor
* When pairing a sensor with a smart computer, a "C" is displayed after the sensor
name.
Tire circumference setting
When the smart computer displays [ID FULL] on the screen and returns to the sensor
pairing screen, the maximum number of sensors have been paired.
Up to 9 separate sensor IDs can be paired with the smart computer.
If the maximum number of sensors have been paired, in the sensor pairing screen, press
OPTION for 4 seconds to clear all pairings.
Then re-pair the required sensors.
Important
* Pairing standby time is 5 minutes.
Activate the sensor within this time.
* If you want to pair another sensor, repeat steps 2 and 3.
4. Press OPTION to return to the measurement screen.
Pairing is now complete.
If you have paired a sensor capable of speed measurement, proceed with setting the tire
circumference.
Switching to Sensor Direct Mode
Pairing a smart computer with a sensor
Tire circumference setting
1. From the measurement screen, press OPTION for 2 seconds to switch to
the sensor pairing screen.
* When the sensor pairing screen is left on for 1 minute, the smart computer returns to the
measurement screen.
2. Select the sensor you want to set, and enter the tire circumference.
Enter the circumference in mm of the tire (the length of the outer circumference of the tire)
on which the sensor is installed.
(Setting range: 0100 – 3999 mm)
Determining tire circumference
(2 seconds)
Sensor pairing
screen
Measurement
screen
Pairing with a sensor
• Pairing (sensor ID synchronization) must be performed first.
Pairing a smart computer with a sensor
• Set tire circumference for each sensor.
The default value is 2096 mm (700x23c).
Important
Set the tire circumference for a sensor capable of speed measurement.
* Sensors that can be selected are those that have been paired with Cateye Cycling™ or
a smart computer. The letter that appears after the sensor name indicates how the
sensor was paired.
• A : Sensor paired with Cateye Cycling™
• C : Sensor paired with a smart computer
* Error is displayed if values outside the setting range are entered.
3. Press OPTION to confirm settings.
Pressing OPTION again returns to the measurement screen.
* If you have changed settings, always press OPTION to confirm changes.
This completes the tire circumference setting procedure.
Sensor
selection
(1 second)
(1 second)
Increase
numbers
Tire circumference
value
Move to
next digit
5. Mounting the bracket
3. Pairing with smart computer
4. Pairing with a sensor
(If you have sensors)
2. Install Cateye Cycling™
1. Checking package contents
The bracket can be mounted on either the stem or the handlebar.
Watch video
Setup Flowchart
Bracket band
Bracket
See illustrations
When mounting on the stem
When mounting on the handlebar
Mounting and removing the smart computer unit
! When mounting on the stem
1. Check bracket orientation and attach it to the bracket band.
2. Remove the seal from the bracket rubber pad and stick the bracket
rubber pad onto the bracket band.
! When mounting on the handlebar
1. Check bracket orientation and attach it to the bracket band.
Bracket
band
Bracket
2. Remove the seal from the bracket rubber pad and stick the bracket
rubber pad onto the bracket band.
Bracket
rubber pad
3. Loop the bracket band around the handlebar and tighten the dial to
secure it.
• Always tighten the dial by hand.
Using a tool or other object to tighten the dial may crush the screw thread.
• Trim bracket band carefully so the cut end will not cause injury (see step 3 above).
Caution
3. Loop the bracket band around the stem and tighten the dial to secure it.
Dial
Cut
Bracket
rubber pad
Click
Cut
• Always tighten the dial by hand.
Using a tool or other object to tighten the dial may crush the screw thread.
• Trim bracket band carefully so the cut end will not cause injury (see step 3 above).
Caution
Dial
To remove smart computer, push out while holding the unit with the other hand to ensure
that it does not fall.
Caution
! Mounting and removing the smart computer unit
Removing
Mounting
Usage Instructions
6. Mounting the speed (cadence) sensor
(ISC-12)
(Optional)
7. Wearing the heart rate sensor (HR-12)
(Optional)
While holding smart computer
Push out
5. Mounting the bracket
3. Pairing with smart computer
4. Pairing with a sensor
(If you have sensors)
2. Install Cateye Cycling™
1. Checking package contents
The speed (cadence) sensor can be mounted either on the top or bottom of the chain stay.
Watch video
6. Mounting the speed (cadence) sensor
(ISC-12)
(Optional)
Setup Flowchart
* Mounting procedures give instructions for mounting on the top of the chain stay.
! Mounting on top of chain stay
Cadence magnet
Wheel
magnet
Speed (cadence)
sensor
Cadence
magnet
Wheel magnet
Speed (cadence) sensor
If the speed (cadence) sensor is mounted on the bottom of the chain stay rather than on the
top, the adjustment range between the sensor and the magnet will be narrower.
Caution
! Mounting on bottom of chain stay
See illustrations
Sensor
rubber pad
1. Temporarily attach the sensor to the left chain stay.
(1) Loosen the sensor screw using a Phillips screwdriver and check that the sensor arm
moves.
Nylon tie
left chain stay
Do not fully tighten the nylon ties. Once the nylon ties are fully tightened they cannot be
removed.
Caution
(2) Attach the sensor rubber pad to the sensor.
(3) Refer to the illustration and temporarily attach the sensor to the left chain stay with
nylon ties.
2. Temporarily attach the magnet.
Sensor screw
Sensor arm
Cadence
magnet
Spoke
Nylon tie
Sensor
zone
Wheel
magnet
(1) Using a nylon tie, temporarily attach the cadence magnet to the inside of the left crank
arm so that it faces the cadence sensor zone.
(2) Rotate the sensor arm and temporarily attach the wheel magnet to a spoke facing the
speed sensor zone.
* If the sensor cannot is not positioned so that both magnets (speed and cadence) pass
through their respective sensor zones, reposition the sensor and the magnets so that
each magnet passes through its sensor zone.
3. Adjust the gap between the sensor zone and the magnet.
(1) Tilt the sensor so that the gap between the cadence magnet and the cadence sensor
zone is approximately 3 mm, then fasten the sensor securely with nylon ties.
Cadence
magnet
Wheel magnet
Sensor screw
(2) Rotate the sensor arm so that the gap between the wheel magnet and the speed
sensor zone is approximately 3 mm, then tighten the sensor screw securely.
4. Secure all parts.
Tighten the sensor's nylon ties, the sensor screw, and the magnets, and check that they
are not loose.
Trim off the excess nylon tie.
* If using pedals with steel axles, the cadence magnet can be attached magnetically to the
Inside of the crank
pedal axle. In this case, remove the adhesive tape from the magnet and do not use the
nylon tie.
Usage Instructions
7. Wearing the heart rate sensor (HR-12)
(Optional)
5. Mounting the bracket
6. Mounting the speed (cadence) sensor
(ISC-12)
(Optional)
3. Pairing with smart computer
4. Pairing with a sensor
(If you have sensors)
2. Install Cateye Cycling™
1. Checking package contents
7. Wearing the heart rate sensor (HR-12)
(Optional)
Setup Flowchart
Heart rate measurement is performed by wearing a heart rate sensor around the chest.
Before wearing the heart rate sensor
• To eliminate measurement errors, it is recommended to moisten the electrode pads with
water or apply electrolyte cream to the pads.
• If you have sensitive skin, moisten the electrode pads with water and wear it over a thin
shirt.
• Chest hair may interfere with measurement in some cases.
Watch video
Never use this device if you use a pacemaker.
Warning
See illustrations
1. Attach the sensor to the HR strap.
Press until you hear a clicking sound.
2. Wear the HR strap by sliding the hook over the other end of the strap.
Wind the HR strap around your body and adjust the length to suit your chest (underbust).
Overtightening the strap may cause discomfort during measurement.
Heart rate sensor
HR strap
Hook
Electrode
pads
Back side
* Wear the heart rate sensor so that TOP faces up.
* Ensure that the electrode pads are in close contact with your body.
* If you have dry skin or are wearing the sensor over a shirt, measurement errors may
result. In such cases, moisten the electrode pads with water.
Usage Instructions
Changing settings
Cateye Cycling™ can be used to configure all settings for smart computer and connected
devices.
* Only sensor pairing settings can be configured with just the smart computer.
Sensor information on the smart computer is overwritten with data from Cateye
Cycling™ when the smart computer connects to the smartphone.
Important
Viewing activities
With Cateye Cycling™, you can check and manage trip and summary data (called
"activities").
All activity summary
Activity list
Uploading
Usage Instructions
You can use smart computer in mirror mode or sensor direct mode depending on your
preferences or the situation.
Mirror Mode and Sensor Direct Mode functions
and display details
What is Mirror Mode?
Smart computer screen
Cateye Cycling™ screen
About screen displays
Start measurement
Important Information for iPhone Users
General
Device
Account
* Information on commercial sensors paired with the smart computer remains as it is.
Usage Instructions
Important Information for iPhone Users
Currently, some restrictions on functions that can be used with Padrone Smart+ apply to
Cateye Cycling™ for iPhone.
These functions will become available through updates to the Padrone Smart+ firmware
and the Cateye Cycling™ app.
It is recommended that users update to the most recent version of Cateye Cycling™ and
Padrone Smart+ firmware whenever possible.
* Areas relevant to the above are described with the
mark.
Updating the firmware:
With the smart computer connected to the iPhone, tap
(menu) > [Device] > [Smart
computer name] > [Update Firmware].
Important
Usage Instructions
Functions and details displayed in Mirror Mode and Sensor
Direct Mode
The following functions can be used in Mirror Mode and Sensor Direct Mode.
*1 Heart rate, cadence, and power measurements require pairing with each sensor.
*2 Requires separate left and right power sensors.
*3 Requires a smartphone with a built-in pressure sensor.
Mirror Mode refers to syncing smart computer with Cateye's smartphone app, Cateye
Cyling™. By using smart computer with Cateye Cycling™, you can connect smart computer
and optional/commercial sensors (speed, cadence, heart rate, and power) with your
smartphone, and record log information including your smartphone's GPS function while you
measure. In this case smart computer becomes a monitor that displays smartphone
measurement data in real time.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by CATEYE Co., Ltd. is
under license. Other trademarks and trade names are those of their respective owners.
By mounting a smart computer on your handlebars, in addition to being able to operate the
Cateye Cycling™ smartphone app when your smartphone is in your bag or pocket, you can
also view measurement data and check if you have received any phone calls or emails.
This feature reduces smartphone battery consumption and avoids the danger of dropping
your smartphone.
It is possible to upload measurement results (trip data) immediately to a service site such as
Cateye Atlas™.
* Even if you do not have a sensor capable of speed measurement, you can use smart
computer as a "sensorless" cyclocomputer using your smartphone's GPS function.
Usage Instructions
What is Mirror Mode?
Smart computer screen
Cateye Cycling™ screen
What is Mirror Mode?
Usage Instructions
Measurement screen
Simple Navigation display
* To customize the screen, tap
(MENU) > [Device] > [Smart computer name] > [Display
Customization].
Changing the measurement screen
The screen segments and display functions to be displayed on the measurement screen can
be assigned through screen customization.
The following explains about customizable display, using the default screen as an example.
Smart computer screen
Explanation of icons:
(Night Mode)
Turns on when the Night Mode setting is ON.
* The Night Mode settings can be accessed by tapping
(MENU) > [Device] > [Smart
computer name].
Device
(Compass)
Allows you to check which direction is north.
(Incoming call/SMS/email notification icon)
The display shows the number of incoming notifications and flashes for apps with
incoming notifications.
When an incoming notification is received, the display will show the app name as well as
the name of the sender.
Measurement screen
Only incoming notifications for e-mail addresses registered through [Phone] and [Add
Account] will be displayed.
When an incoming notification is received, the display will not show the app name or the
name of the sender.
Important
* Contact name registered with non-alphabet characters will be displayed as “Other”.
* The incoming notification icons and count are reset when measurement is paused,
reset, or finished.
* The notification settings can be accessed by tapping
(MENU) > [Device] >
[Notification Setting].
Configuring Incoming Notifications
(Remaining smartphone battery)
Indicates the smartphone's remaining battery.
(Smart computer battery alarm)
Flashes when the smart computer's remaining battery power is low. Replace battery as
soon as possible.
Battery Replacement : Smart computer
(GPS sensitivity)
Indicates GPS signal reception status.
(Sensor signal icon)
Indicates the Bluetooth® sensor's signal reception status.
• Types of icons:
S (Speed signal)
Indicates the speed sensor signal.
C (Cadence signal)
Indicates the cadence sensor signal.
S / C (S and C displayed simultaneously)
Indicates the speed (cadence) sensor (ISC) signal.
H (Heart rate signal)
Indicates the heart rate sensor signal.
P (Power signal)
Indicates the power sensor signal.
• Icon states:
On
Receiving signal in Mirror Mode
Off
No signal
(Pace arrows)
Indicate whether the current speed is faster (
) or slower ( ) than the average speed.
(measurement unit)
Displays the currently selected measurement unit.
• On
Measurement stopped
• Flashing
Measurement in progress
Cateye Cycling™ screen
Direction and straight-line distance
Displays the direction and straight-line distance to the goal (or the start point).
Displays various measurement data.
• Speed/cadence/heart rate flash:
If using a CATEYE sensor, the values related to the sensor's battery replacement period
start flashing to indicate that it is time to replace the battery.
Battery replacement : Optional sensors
• Power values flash:
When using separate left and right power sensors, power values flash on and off to
indicate that only signals from one sensor are being received.
Menu button
Displays the menu.
What is Mirror Mode?
Usage Instructions
This is the Cateye Cycling™ home screen.
From this screen you can start, pause, and finish measurement.
* Starting, pausing, and finishing measurement can be done remotely from the smart
computer unit.
* Measurement data will be displayed as [--] if the sensor signal cannot be received.
Cateye Cycling™ screen
Device connection status icon
Displays connection status with other devices.
(Smart computer)
(Heart rate sensor)
(Speed sensor)
Smart computer screen
Flag button
Finishes measurement.
Switches to the trip upload screen.
Saving and uploading trips
Pause button
Pauses measurement.
Start measurement button
Starts measurement.
* Not available if speed signal or GPS signal cannot be received.
Calibration button
Performs power sensor calibration.
Power sensor calibration
(Cadence sensor)
(Power sensor)
* A grayed-out icon indicates an unconnected sensor.
* Speed (cadence) sensors (ISC) display both
and .
Quick Set
The Quick Set function allows various measurement functions to be turned ON/OFF or a
goal to be set in simple navigation quickly.
GPS icon
Indicates GPS signal reception status.
* Tap the screen on the lap display to switch between AV (average value) and MX
(maximum value).
* Data recorded using Auto Lap will be shown with an "A" after the number.
Lap display
Map display
Switch display mode
Swiping the screen switches to the map display, graph display, and lap display, letting
you check where you have been and view measurement data.
Graph display
Number of temporarily saved trips
Displays the number of temporarily saved trips.
The maximum number of trips that can be saved temporarily is 30. If this number is
exceeded, the icon changes to [Full] and it is not possible to temporarily save any more
trips. It is recommended that trip data is saved and uploaded regularly.
Important
1. Connecting smart computer and smartphone
2. Performing pre-measurement preparation
Usage Instructions
Start measurement
• Smartphone use
When measuring, turn the smartphone display off, and with Cateye Cycling™ running,
store the smartphone in a safe place such as a bag or pocket. As measurement
start/pause/resume and reset operations (finish trip) can be performed remotely from
smart computer, there is no need to take out your smartphone until you want to save or
upload trips.
* Cateye Cycling™ can measure even when running in the background.
• Restrictions on measurement
In Mirror Mode, the maximum elapsed time that can be measured is approximately 1000
hours and maximum trip distance is 10000 km [6200 mile]. When either of these values is
exceeded, measurement finishes and trip data is saved temporarily.
In this case, the display returns to the [READY] (measurement standby) screen ready to
start the next trip measurement.
Important
6. Saving and uploading trips
3. Starting measurement
4. Pausing/resuming measurement
5. Finishing measurement
(reset operation)
This section explains the measurement flow and the measurement functions.
! Functions during measurement
Switching measurement data display
Simple navigation function
Lap function
Auto lap function
Countdown function
Auto pause function
Power-saving mode
Button lock function
If you have power sensors
1. Connecting smart computer and smartphone
Start measurement
Smartphone
1. Launch Cateye Cycling™, and from (MENU) turn on [Connect].
Smart computer
2. On the measurement screen, press MODE for 1 second to display the
smartphone search screen and connect with your smartphone.
When smart computer connects to a smartphone, it switches to the measurement standby
display.
* If the connection is made when Cateye Cycling™ is already measuring, [PAUSE] and
measured values are displayed.
* The appearance of the smart computer screen depends on the state of Cateye
Cycling™.
Smartphone connection is now complete.
Smartphone search
screen
Measurement
standby
2. Performing pre-measurement preparation
3. Starting measurement
4. Pausing/resuming measurement
5. Finishing measurement
6. Saving and uploading trips
(reset operation)
! Functions during measurement
Switching measurement data display
Simple navigation function
Lap function
Auto lap function
Countdown function
Auto pause function
Power-saving mode
Button lock function
If you have power sensors
1. Connecting smart computer and smartphone
2. Performing pre-measurement preparation
The following procedure shows how to turn various measurement functions ON/OFF and how
to configure goal settings as desired.
This section also explains the quick set feature for quickly configuring settings from the Trip
screen.
Smartphone
1. Tap (MENU) and then [Trip].
2. Tap [Quick Set] on the upper right of the screen.
• Auto lap / Countdown
Turn the function ON/OFF as desired.
Auto lap function
Countdown function
* The settings reflect the previous setting configuration. Navigate to the following
screens to change settings.
• Auto Lap :
(MENU) > [General] > [Auto Lap]
General
• Countdown :
(MENU) > [Device] > [Countdown]
Device
Start measurement
• Goal
Specifies a goal in simple navigation.
Simple navigation function
3. Tap (back).
The display returns to the Trip screen.
6. Saving and uploading trips
3. Starting measurement
4. Pausing/resuming measurement
5. Finishing measurement
(reset operation)
! Functions during measurement
Switching measurement data display
Simple navigation function
Lap function
Auto lap function
Countdown function
Auto pause function
Power-saving mode
Button lock function
If you have power sensors
1. Connecting smart computer and smartphone
2. Performing pre-measurement preparation
3. Starting measurement
Smart computer
When smart computer is on the [READY] (measurement standby) screen, pressing SS/LAP
for 1 second starts measurement.
* If the connection with the smartphone is interrupted during measurement, smart computer
switches to the smartphone search screen. When the connection is reestablished, Smart
computer returns to the measurement screen.
(1 second)
Measurement
standby
Measurement
starts
Start measurement
6. Saving and uploading trips
4. Pausing/resuming measurement
5. Finishing measurement
(reset operation)
! Functions during measurement
Switching measurement data display
Simple navigation function
Lap function
Auto lap function
Countdown function
Auto pause function
Power-saving mode
Button lock function
If you have power sensors
1. Connecting smart computer and smartphone
2. Performing pre-measurement preparation
3. Starting measurement
4. Pausing/resuming measurement
Smart computer
Pressing SS/LAP for 1 second displays [PAUSE] and pauses measurement.
Pressing SS/LAP again for 1 second resumes measurement.
(1 second)
During
measurement
Paused
Start measurement
6. Saving and uploading trips
5. Finishing measurement
(reset operation)
! Functions during measurement
Switching measurement data display
Simple navigation function
Lap function
Auto lap function
Countdown function
Auto pause function
Power-saving mode
Button lock function
If you have power sensors
1. Connecting smart computer and smartphone
2. Performing pre-measurement preparation
3. Starting measurement
4. Pausing/resuming measurement
5. Finishing measurement
(reset operation)
Smart computer
Pressing MODE for 3 seconds will end measurement and switch to the [READY] display.
At this time, the trip data will be temporarily saved to the smartphone, and the measurements
on the smart computer will be reset.
To continue measuring, press SS/LAP for 1 second.
To finish measuring, save and upload the trip data through the smartphone.
Saving and uploading trips
(3 seconds)
Reset/
finish trip
Paused
During
measurement
Measurement
standby
Start measurement
6. Saving and uploading trips
! Functions during measurement
Switching measurement data display
Simple navigation function
Lap function
Auto lap function
Countdown function
Auto pause function
Power-saving mode
Button lock function
If you have power sensors
1. Connecting smart computer and smartphone
6. Saving and uploading trips
2. Performing pre-measurement preparation
3. Starting measurement
4. Pausing/resuming measurement
5. Finishing measurement
(reset operation)
After measurement is complete, the trip can be saved in Cateye Cycling™ and can be
uploaded to various service sites.
Smartphone
1. On the Trip screen, tap (Flag) to finish measurement.
The app switches to the upload screen.
2. Turn on an upload destination.
* Trip names can be edited.
* You must have an account with the relevant site to upload data.
Account
* Cateye Cycling™ only allows you to post links of trips uploaded to CATEYE Atlas™ on
Facebook™ and Twitter™. Links to other service sites cannot be posted.
3. Tap (Save & Upload). Trips are saved in Cateye Cycling™ and
uploaded to the selected service sites.
* Repeat this action if there are multiple trips.
* Tap
(Delete) to delete a trip.
* Tap
(MENU) > [Activity List] to see the trips saved in Cateye Cycling™.
Start measurement
Activity list
* When not performing measurement, it is recommended that you turn off [Connect] from
(MENU) to minimize smartphone battery drain.
! Functions during measurement
Switching measurement data display
Simple navigation function
Lap function
Auto lap function
Countdown function
Auto pause function
Power-saving mode
Button lock function
If you have power sensors
Smart computer
You can switch the display of data being measured in Cateye Cycling™ by pressing MODE.
* The data displayed changes depending on the state of the sensor connection and the
screen customization settings. The following gives an example of initial configuration of the
measurement screen.
Switching measurement data display
Start measurement
Auto lap function
Countdown function
Auto pause function
Power-saving mode
Button lock function
If you have power sensors
Simple navigation function
Lap function
* During initial configuration, screens 3 through 5 are undefined and thus not shown. To add
screens or to change screen segments or measurement data, tap
(MENU) > [Device] >
[Smart computer name] > [Display Customization].
Changing the measurement screen
* Heart rate, cadence, and power data will not be displayed unless each sensor is paired.
Start measurement
Switching measurement data display
Simple navigation function
The Simple navigation function displays the direction and straight-line distance from a current
location to a goal or a start point.
Display goal
Smart computer
1. Press OPTION on the measurement screen for 1 second to show simple
navigation (goal) on the upper part of the screen.
Being able to check the direction and straight-line distance to a goal makes it possible to
continue travelling without losing sight of the goal.
2. Press OPTION for 1 second to return to the measurement screen.
(1 second)
Measurement
screen
Simple Navigation
display (goal)
Display the direction and straight-line distance to the goal.
This function cannot be used if no goal is defined.
Specifying a goal
* Goals can also be set while a trip is being recorded if the smart computer is in the
[PAUSE] state.
Important
• The simple navigation function shows the direction and straight-line distance. It does not
provide route (street) guidance.
• The simple navigation function cannot be displayed when screen customization is set to
display 7 or 8 screen segments.
* To configure the screen segment settings for the measurement screen, tap
(MENU) > [Device] > [Smart computer name] > [Display Customization].
Changing the measurement screen
Important
Back to start point
Smart computer
1. Press OPTION on the measurement screen or on the simple navigation
display (goal) to show simple navigation (back to start point) on the
upper part of the screen.
This function allows you to return to a start point while checking the direction and
straight-line distance to the start point.
2. Press OPTION to return to the measurement screen.
* Performing the same operation will display the simple navigation (start point) again.
Measurement
screen
Simple Navigation
display
(start point)
Simple Navigation
display (goal)
Simple Navigation
display
(start point)
Measurement
screen
Display the direction and straight-line distance to the start point.
* Because a trip's start point is set automatically, this function can be used right away.
* Performing the same operation will display the simple navigation (goal) again.
* To go back to a start point, see "Back to start point".
(1 second)
Simple Navigation
display (goal)
Measurement
screen
Button lock function
Auto lap function
Countdown function
Auto pause function
Power-saving mode
If you have power sensors
Lap function
Start measurement
Simple navigation function
Switching measurement data display
Lap function
Smart computer
You can record a lap by pressing SS/LAP on the measurement screen during measurement.
When the lap is recorded, the lap information is displayed temporarily before returning to the
original measurement screen.
The displayed lap information is as follows.
* This feature can be used in conjunction with the auto lap function.
*1 The sequential lap number, including auto laps, will be displayed.
If the total number of laps exceeds 999, the following laps will not be recorded.
*2 Measurement data will be displayed as [--] if the sensor signal cannot be received.
*3 Requires a smartphone with a built-in pressure sensor.
Auto lap function
Countdown function
Auto pause function
Power-saving mode
Button lock function
If you have power sensors
Start measurement
Simple navigation function
Lap function
Switching measurement data display
Auto lap function
Smart computer
Laps can be recorded automatically without any button operation according to distances,
times, or locations set in advance.
When the lap is recorded, the lap information is displayed temporarily before returning to the
original measurement screen.
The displayed lap information is as follows.
* This feature can be used in conjunction with the lap function.
Countdown function
Auto pause function
*1 A number that includes both the lap number and the auto lap number will be displayed.
If the total number of laps exceeds 999, the following laps will not be recorded.
*2 The display shows the measurement status of the auto lap being measured and the lap
count.
*3 Measurement data will be displayed as [--] if the sensor signal cannot be received.
*4 Requires a smartphone with a built-in pressure sensor.
* The Auto lap function settings can be accessed by tapping
(MENU) > [General] >
[Auto Lap].
General
Power-saving mode
If you have power sensors
Button lock function
Start measurement
Auto lap function
Simple navigation function
Lap function
Switching measurement data display
Countdown function
Smart computer
This function delivers a notification when a distance or time set as a goal is reached.
When the goal is reached, [FINISH] flashes on the screen and an alarm sounds.
• Distance: The specified distance is set as the goal.
• Time: The specified time is set as the goal.
* The countdown function settings can be accessed by tapping
(MENU) > [Device] >
[Smart computer name] > [Countdown].
Device
* The countdown restarts after measurement is finished.
Finishing measurement (reset operation)
Measurement
screen
When goal is
reached
BEEP!
Auto pause function
Power-saving mode
If you have power sensors
Button lock function
Start measurement
Auto lap function
Countdown function
Simple navigation function
Lap function
Switching measurement data display
Auto pause function
Smartphone
This function automatically pauses measurement when the connection between the
smartphone and smart computer is broken.
Measurement resumes automatically when the connection is reestablished.
* The Auto Pause settings can be accessed by tapping
(MENU) > [Device].
Device
Power-saving mode
If you have power sensors
Button lock function
Start measurement
Auto lap function
Countdown function
Auto pause function
Simple navigation function
Lap function
Switching measurement data display
Power-saving mode
Smart computer
When smart computer is left on the [ready] (measurement standby) screen, [PAUSE] screen,
or smartphone search screen for approximately 20 minutes; Cateye Cycling™ is closed; or
[Connect] is turned off, the sleep display is activated.
When any button is pressed, the smart computer returns to the smartphone search screen
and then returns to the measurement screen when the connection with the smartphone is
reestablished.
Measurement
standby
Sleep
Any button
except the
AC button
Paused
Smartphone search
screen
When left
for approx.
20 minutes
If you have power sensors
Button lock function
Auto pause function
Start measurement
Auto lap function
Countdown function
Simple navigation function
Lap function
Switching measurement data display
Smart computer
Pressing SS/LAP and OPTION simultaneously will lock the buttons, preventing accidental
operation when the smart computer is stored in a pocket, etc.
Repeating the same operation will unlock the buttons.
Power-saving mode
If you have power sensors
Button lock function
Button lock
Lock/unlock
buttons
Start measurement
When a signal is received from a paired power sensor, power data is displayed as a value.
Smart computer
The power, average power, custom average power, maximum power, average lap power in
real time, and power balance can be displayed on a smart computer.
* Separate left and right power sensors are necessary for power balance measurement.
* To display power data on the measurement screen, it is necessary to register functions
(measurement data) by tapping
(MENU) > [Device] > [Smart computer name] >
[Display Customization].
Changing the measurement screen
* Tap
(MENU) > [Device] > [Smart computer name] > [Custom Average Power] to
specify the calculated number of seconds for the custom average power.
Device
Smartphone
Only current power can be viewed on a smartphone.
* When the power value exceeds 999, the last three digits are displayed.
Power
Auto lap function
Countdown function
Auto pause function
Power-saving mode
Simple navigation function
Lap function
Switching measurement data display
If you have power sensors
Button lock function
* To increase precision, it is recommended to perform calibration before power measurement.
Power sensor calibration
All activity summary
Usage Instructions
It is possible to check total values for all activities saved in Cateye Cycling™ and maximum
values for individual trips.
Smartphone
1. Tap (MENU) and then [All Activity Summaryl].
Activity list
Uploading
Usage Instructions
All activity summary
Activity list
Uploading
It is possible to check individual activities (trip data and summary data collectively) saved in
Cateye Cycling™.
Smartphone
1. Tap (MENU) and then [Activity List].
* The Activity List can be displayed in graph, list, or calendar format.
* Tapping
(Select to Delete) moves to the activity deletion screen.
Select the activities you want to delete and tap
(Delete).
2. Tap each activity to check details or upload/delete it.
• (Upload) :
Upload to service sites
•
(Delete) :
Delete activity
Activity list
All activity summary
Uploading
Usage Instructions
Multiple activities can be uploaded to service sites in one action.
Smartphone
1. Tap (MENU) and then [Upload].
* Activities already uploaded to service sites are not displayed.
2. Select the activities you want to upload and tap (Upload) to upload
them to the specified sites.
* You must have an account with the relevant site to upload data.
* The upload destinations for Upload All are those sites turned on under
(MENU) >
[Account].
Account
Usage Instructions
General
This section explains how to configure various measurement settings.
Smartphone
1. Tap (MENU) and then [General].
• Recording Interval
Selects the interval at which the log is recorded.
• Units
Selects the measurement unit.
Device
Account
If the unit is changed with the smart computer unconnected, the settings will be applied
the next time the smart computer is connected.
Important
• Preset Altitude
Applies a preset to the altitude of a specified position such as your home.
Turning Preset Altitude ON will correct the altitude at the start point of the measurement,
improving the reliability of the altitude measurement.
* The iPhone 6 and other smartphones with high-accuracy altitude measurement
capabilities do not require an altitude preset.
• Auto Lap
Selects which method—distance, time, or map—to use for automatic lap input.
* Designating a point on the map:
To Designate a point, press and hold on the desired location on the map.
Usage Instructions
General
Device
Smartphone
1. Tap (MENU) and then [Device].
Changing smart computer settings
• Nickname
Changes the name of the smart computer.
• Device settings are shared when smart computer is connected to your smartphone.
• When using an iPhone, you cannot sync settings of commercial sensors.
When measuring in Sensor Direct Mode, it is necessary to configure sensor settings
separately via smart computer.
1. Switching to Sensor Direct Mode
2. Pairing a smart computer with a sensor
3. Tire circumference setting
Important
The following section explains how to pair a smart computer with a sensor and how to
configure various settings.
Changing sensor settings
These settings can be configured even when your smartphone is not connected to smart
computer.
Important
* Paired sensors are displayed with "A" or "C" after the sensor name.
A : Sensor paired with Cateye Cycling™
C: Sensor paired with a smart computer
• Notification Setting
Configures settings for incoming call, email, and SMS app notifications and smartphone
remaining battery notification.
Only incoming notifications for e-mail addresses registered through [Phone] and [Add
Account] will be displayed.
When an incoming notification is received, the display will not show the app name or
the name of the sender.
Important
Configuring Incoming Notifications
• Countdown
Sets a distance or a time as a goal.
• Simple Navigation
Designates a goal in simple navigation.
Designating a goal
• Auto Pause
This function automatically pauses measurement when the connection between smart
computer and your smartphone is interrupted if you move away from the bicycle with
your smartphone during measurement.
• Display Customization
Lets you select the measurement screens to add or delete in addition to the screen
segments and functions (measurement data) to be displayed on each screen.
Changing the measurement screen
• Night Mode
Configures when to start and end backlight illumination.
When Night Mode is ON, pressing any button on the smart computer during the
specified time will turn the backlight on.
• Sounds
Lets you turn the operation sounds, alert sounds, and notification sounds on or off.
• Compass
Lets you select whether to show or hide the compass on the measurement screen.
• Odometer
Lets you manually set total distance traveled.
* Use this function when you want to continue from the same distance after purchasing a
new smart computer or when resetting smart computer.
• Function Names
Lets you select between [Abbreviated] or [Full] for displaying measurement data names
on the measurement screen.
(Ex.) Abbreviated display for trip distance: DST
Full display for trip distance: Distance
• Custom Average Power
Sets the number of seconds for calculating average power to your preferences.
* Custom average power measurements require pairing with a power sensor.
• Firmware Update
Updates the smart computer firmware to the most recent version.
* See the following for pairing with a smart computer or a sensor.
Pairing with smart computer
Pairing with a sensor
Account
• Nickname
Changes the name of the sensor.
• Tire Circumference (only with a sensor capable of speed measurement)
Set the tire circumference for a sensor capable of speed measurement.
Select the tire circumference according to the tire size written on the side of the tire.
Determining tire circumference
* Default value: 2096 mm (700x23C)
* Requires to set tire circumference for each sensor.
If settings differ between devices, they will be overwritten with data from Cateye
Cycling™ the next time the devices are connected.
* Information on commercial sensors paired with the smart computer remains as it is.
Smartphone
Tap (MENU) > [Device] > [Smart computer name], and then follow the procedure below.
Configuring Incoming Notifications
Device
Notifications from smartphone applications and the smartphone’s remaining battery can be
displayed on the smart computer.
Important
• Cateye Cycling notification settings are applied to applications enabled in the
smartphone's notification settings.
• Email notifications are shown for e-mail accounts registered in the smartphone settings.
Only incoming notifications for e-mail addresses registered through [Phone] and [Add
Account] will be displayed.
When an incoming notification is received, the display will not show the app name or the
name of the sender.
Changing settings on an iPhone
• Low Battery Notification
When the smartphone battery reaches a specified amount,
(remaining
smartphone battery) flashes on the smart computer.
• Phone / Email
When a notification arrives, [Phone] or [Mail] flashes on the smart computer’s screen,
with an audible alarm. After the notification closes,
/ (incoming call/email
notification icon) will flash.
*1: It is necessary to configure email account settings to receive incoming notification.
Smartphone
Tap (MENU) > [Device] > [Smart computer name], and then follow the procedure
below.
1. Tap [Notification Setting].
1. Tap [Notification Setting].
• Low Battery Notification
When the smartphone battery reaches a specified amount,
(remaining
smartphone battery) flashes on the smart computer.
• Phone / Messages / Email / Social Network
When a notification arrives, [Application name] and [Contact name] (alphabetical), or
[Phone number] or [Email address] flashes on the smart computer’s screen, with an
audible alarm.
* Contact name registered with non-alphabet characters will be displayed as “Other”.
After the notification closes,
/ / (incoming notification icon) and the
notification count will flash.
* The incoming notification icons and count cannot be displayed when screen
customization is set to display 8 screen segments.
* The incoming notification icons and count are reset when measurement is paused,
reset, or finished.
BEEP! BEEP! BEEP!
Designating a goal
Device
The following explains how to designate a goal in simple navigation.
Smartphone
Tap (MENU) > [Device] > [Smart computer name], and then follow the procedure below.
1. Tap [Simple Navigation].
Under [Simple Navigation], there are four methods for designating a goal.
• Enter the address:
Enter an address in the search field.
• Select from a map:
Swipe the map to move the location, and long-press to confirm.
• Select from an iPhone contact:
Tap [History] > [Select from Contacts] to select a goal from the addresses of your
registered contacts.
• Select from history:
Tap [History] to select a goal from the history list.
Changing the measurement screen
Device
This section explains how to change the display of the measurement screen.
Smartphone
Tap (MENU) > [Device] > [Smart computer name], and then follow the procedure below.
1. Tap [Display Customization].
Here, you can verify the current screen segments and functions (measurement data).
• Changing the order of screens 1 through 5:
Tap [Edit] and swipe the desired screen to change the order.
2. Tap a screen to change how it is displayed.
Select the measurement screens to show or hide and the screen segments and functions
(measurement data) to be displayed.
• Displaying/hiding the measurement screen
If the screen display is set to ON, that measurement screen will be displayed.
If it's set to OFF, that screen will not be displayed.
• Selecting screen segments:
Tap [Screen Segments] to select between [None] and [8 segments].
* The simple navigation function cannot be displayed when [Screen Segments] is set to
[7 segments] or [8 segments].
* The incoming notification icons and count cannot be displayed when [Screen
Segments] is set to [8 segments].
• Selecting a function (measurement data):
Tap [Function Names] or
to select a function.
• Reordering functions:
Tap [Edit] and swipe the desired function to another location to change the display
position.
* Screen customization settings will be applied to both Mirror Mode and Sensor Direct Mode.
Usage Instructions
Device
General
Account
Set up the service sites and social networking services (SNSs) to upload your activities.
1. Tap (MENU) and then [Account].
Adjust settings for the service sites below.
* You must have an account with the relevant site to upload data.
Service sites
CATEYE Atlas™
STRAVA™
TRAINING PEAKS™
SNS
Facebook™
Twitter™
* When using an SNS, links to activities uploaded to Cateye Atlas™ are posted.
Changing settings
Cateye Cycling™ can be used to configure all settings for smart computer and connected
devices.
* Only sensor pairing settings can be configured with just the smart computer.
• Sensor information on the smart computer is overwritten with data from Cateye
Cycling™ when the smart computer connects to the smartphone.
* Information on commercial sensors paired with the smart computer remains as it is.
Important
Viewing activities
With Cateye Cycling™, you can check and manage trip and summary data (called
"activities").
All activity summary
Activity list
Uploading
Usage Instructions
You can use smart computer in mirror mode or sensor direct mode depending on your
preferences or the situation.
What is Sensor Direct Mode?
Smart computer screen
Start measurement
About screen displays
Mirror Mode and Sensor Direct Mode functions
and display details
Important Information for iPhone Users
General
Device
Account
• When using an iPhone, you cannot sync settings of commercial sensors.
When measuring in Sensor Direct Mode, it is necessary to configure sensor settings
separately via smart computer.
1. Switching to Sensor Direct Mode
2. Pairing a smart computer with a sensor
3. Tire circumference setting
Important Information for iPhone Users
Currently, some restrictions on functions that can be used with Padrone Smart+ apply to
Cateye Cycling™ for iPhone.
These functions will become available through updates to the Padrone Smart+ firmware
and the Cateye Cycling™ app.
It is recommended that users update to the most recent version of Cateye Cycling™ and
Padrone Smart+ firmware whenever possible.
* Areas relevant to the above are described with the
mark.
Updating the firmware:
With the smart computer connected to the iPhone, tap
(menu) > [Device] > [Smart
computer name] > [Update Firmware].
Important
Usage Instructions
Usage Instructions
Functions and details displayed in Mirror Mode and
Sensor Direct Mode
The following functions can be used in Mirror Mode and Sensor Direct Mode.
*1 Heart rate, cadence, and power measurements require pairing with each sensor.
*2 Requires separate left and right power sensors.
*3 Requires a smartphone with a built-in pressure sensor.
Usage Instructions
What is Sensor Direct Mode?
Sensor Direct Mode refers to using smart computer as a regular cyclocomputer without your
smartphone.
In this case, Smart computer measures by receiving signals directly from each sensor
(speed, cadence, heart rate, and power).
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by CATEYE Co., Ltd. is
under license. Other trademarks and trade names are those of their respective owners.
Measurement results such as elapsed time and trip distance (summary data) can be
forwarded to a smartphone via Cateye Cycling™ and uploaded to a service site such as
CATEYE Atlas™.
* Trip logs cannot be recorded in Sensor Direct Mode.
* When using an iPhone, you cannot sync settings of commercial sensors.
When measuring in Sensor Direct Mode, it is necessary to configure sensor settings
separately via smart computer.
1. Switching to Sensor Direct Mode
2. Pairing a smart computer with a sensor
3. Tire circumference setting
Smart computer screen
What is Sensor Direct Mode?
Usage Instructions
* To customize the screen, tap (MENU) > [Device] > [Smart computer name] > [Display
Customization].
Changing the measurement screen
Measurement screen
The screen segments and display functions to be displayed on the measurement screen can
be assigned through screen customization.
The following explains about customizable display, using the default screen as an example.
Smart computer screen
Explanation of icons:
(Night Mode)
Turns on when the Night Mode setting is ON.
* The Night Mode settings can be accessed by tapping
(MENU) > [Device] > [Smart
computer name].
Device
(Smart computer battery alarm)
Flashes when the smart computer's remaining battery power is low. Replace battery as
soon as possible.
Battery Replacement : Smart computer
(Sensor signal icon)
Indicates the Bluetooth® sensor's signal reception status.
• Types of icons:
S (Speed signal)
Indicates the speed sensor signal.
C (Cadence signal)
Indicates the cadence sensor signal.
S / C (S and C displayed simultaneously)
Indicates the speed (cadence) sensor (ISC) signal.
H (Heart rate signal)
Indicates the heart rate sensor signal.
P (Power signal)
Indicates the power sensor signal.
• Icon states:
Measurement screen
Displays various measurement data.
• Speed/cadence/heart rate flash:
If using a CATEYE sensor, the values related to the sensor's battery replacement period
start flashing to indicate that it is time to replace the battery.
Battery replacement : Optional sensors
• Power values flash:
When using separate left and right power sensors, power values flash on and off to
indicate that only signals from one sensor are being received.
Flashing
Signal being received in Sensor Direct Mode
Off
No signal
(Pace arrows)
Indicate whether the current speed is faster (
) or slower ( ) than the average speed.
(measurement unit)
Displays the currently selected measurement unit.
• On
Measurement stopped
• Flashing
Measurement in progress
! Functions during measurement
Switching measurement data display
Power-saving mode
Button lock function
If you have power sensors
Usage Instructions
4. Importing summary data
1. Switching to Sensor Direct Mode
2. Starting/stopping measurement
3. Saving measurement data
(reset operation)
Start measurement
This section explains the measurement flow and the measurement functions.
1. Switching to Sensor Direct Mode
Start measurement
Switch from Mirror Mode to Sensor Direct Mode.
Smartphone
1. Close Cateye Cycling™ or from (MENU), turn off [Connect].
Smart computer
2. From the smartphone search screen, press MODE for 1 second to switch
to Sensor Direct Mode.
* Smart computer will search for a sensor instead of your smartphone. In this mode, the
sensor icon flashes to indicate sensor reception status.
• S (Flash): When the speed signal is received
• C (Flash): When the cadence signal is received
• S/C (S and C flash simultaneously): When the speed/cadence (ISC) sensor signal is
received
• H (Flash): When the heart rate signal is received
• P (Flash): When the power signal is received
(1 second)
Smartphone search
screen
Measurement
screen
2. Starting/stopping measurement
3. Saving measurement data
Sensor Direct Mode and Mirror Mode measure independently and data has no continuity.
Important
!Functions during measurement
Switching measurement data display
Power-saving mode
Button lock function
If you have power sensors
4. Importing summary data
(reset operation)
Start measurement
!Functions during measurement
Switching measurement data display
Power-saving mode
Button lock function
If you have power sensors
4. Importing summary data
1. Switching to Sensor Direct Mode
2. Starting/stopping measurement
3. Saving measurement data
(reset operation)
Smart computer
Measurement starts automatically when the bicycle moves.
During measurement the measurement unit flashes.
* The pause function is not available in Sensor Direct Mode.
Start measurement
!Functions during measurement
Switching measurement data display
Power-saving mode
Button lock function
If you have power sensors
4. Importing summary data
1. Switching to Sensor Direct Mode
2. Starting/stopping measurement
3. Finishing measurement (reset operation)
Smart computer
Pressing and holding MODE when on the measurement screen generates
measurement data as summary results and resets measurement data to 0.
* When MODE has been pressed for 1 second, a smartphone search screen
appears, but you should continue to hold down the button.
* Total Distance (Odo) cannot be reset.
* The summary data generated is loaded into the smartphone.
Importing summary data
Reset
(3 seconds)
The maximum number of trips that smart computer can save temporarily is 30. If this
number is exceeded, the
MEMORY FULL appears on the screen, and the oldest
summary data is deleted when smart computer is reset.
Frequent importing of summary data to a connected smartphone is recommended.
Currently, summary data cannot be generated for trips less than 3 minutes long.
Important
4. Importing summary data
1. Switching to Sensor Direct Mode
2. Starting/stopping measurement
3. Saving measurement data
(reset operation)
Smartphone
1. Launch Cateye Cycling™, and from (MENU) turn on [Connect].
Smart computer
2. On the measurement screen, press MODE for 1 second to display the
smartphone search screen and connect with your smartphone.
When smart computer connects to a smartphone, it switches to the measurement standby
display.
Smartphone search
screen
Measurement
standby
Start measurement
Before importing summary data, always finish smart computer measurement (reset
operation).
You cannot import data for which measurement has not finished.
Saving measurement data (reset operation)
Important
You can send summary data accumulated in smart computer (measurement results of sensor
direct mode) to your smartphone.
* The appearance of the smart computer screen depends on the state of Cateye
Cycling™.
* It is not possible to import data while measuring with Cateye Cycling™.
Smartphone
3. Tap (MENU) and then [Activity List].
If there is summary data in smart computer, the
(Import from CC) is displayed.
Tapping the button imports summary data to your smartphone and updates the activity list.
* This action deletes summary data from smart computer.
* After importing summary data, it is recommended that you turn off [Connect] from
(MENU) to minimize smartphone battery drain.
!Functions during measurement
Switching measurement data display
Power-saving mode
Button lock function
If you have power sensors
Smart computer
Pressing MODE switches the measurement data displayed at the bottom of the screen.
* The data displayed changes depending on the state of the sensor connection and the
screen customization settings. The following gives an example of initial configuration of the
measurement screen.
Switching measurement data display
Start measurement
Power-saving mode
Button lock function
If you have power sensors
* During initial configuration, screens 3 through 5 are undefined and thus not shown. To add
screens or to change screen segments or measurement data, tap
(MENU) > [Device] >
[Smart computer name] > [Display Customization].
Changing the measurement screen
* Measurement data and lap-related data that require use of the smartphone's GPS will not
be displayed in Sensor Direct Mode.
Functions and details displayed in Mirror Mode and Sensor Direct Mode
* Heart rate, cadence, and power data will not be displayed unless each sensor is paired.
* Average values are displayed as .E instead of the measurement value when Elapsed Time
exceeds approximately 1000 hours. Average speed is also displayed as .E instead of the
measurement value when Trip Distance exceeds 10000 km [6200 mile].
Reset smart computer and start measurement again to enable average value
measurement.
Saving measurement data (reset operation)
Switching measurement data display
Power-saving mode
Smart computer
If there is no sensor signal nor button operation for 10 minutes, the power-saving screen is
activated. If such a state continues for a further hour, the sleep display is activated.
The power-saving screen returns to the measurement screen when the bicycle starts moving.
If you have power sensors
Measurement
screen
Power-saving
screen
Sleep
When left
for approx.
10 min
When
left for
approx.
60 min
Any button except
the AC button
Button lock function
Start measurement
Smart computer
Pressing SS/LAP and OPTION simultaneously will lock the buttons, preventing accidental
operation when the smart computer is stored in a pocket, etc.
Repeating the same operation will unlock the buttons.
Button lock
Lock/unlock
buttons
Switching measurement data display
Button lock function
If you have power sensors
Power-saving mode
Start measurement
When a signal is received from a paired power sensor, power data is displayed as a value.
Smart computer
The power, average power, custom average power, maximum power, average lap power in
real time, and power balance can be displayed on a smart computer.
* Separate left and right power sensors are necessary for power balance measurement.
* To display power data on the measurement screen, it is necessary to register functions
(measurement data) by tapping
(MENU) > [Device] > [Smart computer name] >
[Display Customization].
Changing the measurement screen
* Tap
(MENU) > [Device] > [Smart computer name] > [Custom Average Power] to
specify the calculated number of seconds for the custom average power.
Device
* To increase precision, it is recommended to perform calibration before power measurement.
Perform calibration using Cateye Cycling™, making sure to first connect a smartphone.
1. Connecting smart computer and smartphone
2. Power sensor calibration
Power-saving mode
Switching measurement data display
If you have power sensors
Button lock function
Start measurement
All activity summary
Usage Instructions
Activity list
Uploading
It is possible to check total values for all activities saved in Cateye Cycling™ and maximum
values for individual trips.
Smartphone
1. Tap (MENU) and then [All Activity Summaryl].
Usage Instructions
All activity summary
Activity list
It is possible to check individual activities (trip data and summary data collectively) saved in
Cateye Cycling™.
Smartphone
1. Tap (MENU) and then [Activity List].
* The Activity List can be displayed in graph, list, or calendar format.
* Tapping
(Select to Delete) moves to the activity deletion screen.
Select the activities you want to delete and tap
(Delete).
2. Tap each activity to check details or upload/delete it.
• (Upload) :
Upload to service sites
•
(Delete) :
Delete activity
Uploading
Activity list
All activity summary
Uploading
Usage Instructions
Multiple activities can be uploaded to service sites in one action.
Smartphone
1. Tap (MENU) and then [Upload].
* Activities already uploaded to service sites are not displayed.
2. Select the activities you want to upload and tap (Upload) to upload
them to the specified sites.
* You must have an account with the relevant site to upload data.
* The upload destinations for Upload All are those sites turned on under
(MENU) >
[Account].
Account
Usage Instructions
General
Device
Account
This section explains how to configure various measurement settings.
Smartphone
1. Tap (MENU) and then [General].
• Recording Interval
Selects the interval at which the log is recorded.
• Units
Selects the measurement unit.
If the unit is changed with the smart computer unconnected, the settings will be applied the
next time the smart computer is connected.
Important
• Preset Altitude
Applies a preset to the altitude of a specified position such as your home.
Turning Preset Altitude ON will correct the altitude at the start point of the measurement,
improving the reliability of the altitude measurement.
* The iPhone 6 and other smartphones with high-accuracy altitude measurement
capabilities do not require an altitude preset.
• Auto Lap
Selects which method—distance, time, or map—to use for automatic lap input.
* Designating a point on the map:
To Designate a point, press and hold on the desired location on the map.
Usage Instructions
General
Device
Smartphone
1. Tap (MENU) and then [Device].
Changing smart computer settings
• Nickname
Changes the name of the smart computer.
* Paired sensors are displayed with "A" or "C" after the sensor name.
• Device settings are shared when smart computer is connected to your smartphone.
• When using an iPhone, you cannot sync settings of commercial sensors.
When measuring in Sensor Direct Mode, it is necessary to configure sensor settings
separately via smart computer.
1. Switching to Sensor Direct Mode
2. Pairing a smart computer with a sensor
3. Tire circumference setting
Important
The following section explains how to pair a smart computer with a sensor and how to
configure various settings.
Changing sensor settings
These settings can be configured even when your smartphone is not connected to smart
computer.
If settings differ between devices, they will be overwritten with data from Cateye
Important
A : Sensor paired with Cateye Cycling™
C: Sensor paired with a smart computer
• Notification Setting
Configures settings for incoming call, email, and SMS app notifications and smartphone
remaining battery notification.
Only incoming notifications for e-mail addresses registered through [Phone] and [Add
Account] will be displayed.
When an incoming notification is received, the display will not show the app name or
the name of the sender.
Important
Configuring Incoming Notifications
• Countdown
Sets a distance or a time as a goal.
• Simple Navigation
Designates a goal in simple navigation.
Designating a goal
• Auto Pause
This function automatically pauses measurement when the connection between smart
computer and your smartphone is interrupted if you move away from the bicycle with
your smartphone during measurement.
• Display Customization
Lets you select the measurement screens to add or delete in addition to the screen
segments and functions (measurement data) to be displayed on each screen.
Changing the measurement screen
• Night Mode
Configures when to start and end backlight illumination.
When Night Mode is ON, pressing any button on the smart computer during the
specified time will turn the backlight on.
• Sounds
Lets you turn the operation sounds, alert sounds, and notification sounds on or off.
• Compass
Lets you select whether to show or hide the compass on the measurement screen.
• Odometer
Lets you manually set total distance traveled.
* Use this function when you want to continue from the same distance after purchasing a
new smart computer or when resetting smart computer.
• Function Names
Lets you select between [Abbreviated] or [Full] for displaying measurement data names
on the measurement screen.
(Ex.) Abbreviated display for trip distance: DST
Full display for trip distance: Distance
• Custom Average Power
Sets the number of seconds for calculating average power to your preferences.
* Custom average power measurements require pairing with a power sensor.
• Firmware Update
Updates the smart computer firmware to the most recent version.
Account
* See the following for pairing with a smart computer or a sensor.
Pairing with smart computer
Pairing with a sensor
• Nickname
Changes the name of the sensor.
• Tire Circumference (only with a sensor capable of speed measurement)
Set the tire circumference for a sensor capable of speed measurement.
Select the tire circumference according to the tire size written on the side of the tire.
Determining tire circumference
* Default value: 2096 mm (700x23C)
* Requires to set tire circumference for each sensor.
Cycling™ the next time the devices are connected.
* Information on commercial sensors paired with the smart computer remains as it is.
Configuring Incoming Notifications
Device
Smartphone
Tap (MENU) > [Device] > [Smart computer name], and then follow the procedure below.
Notifications from smartphone applications and the smartphone’s remaining battery can be
displayed on the smart computer.
Important
• Cateye Cycling notification settings are applied to applications enabled in the
smartphone's notification settings.
• Email notifications are shown for e-mail accounts registered in the smartphone settings.
Only incoming notifications for e-mail addresses registered through [Phone] and [Add
Account] will be displayed.
When an incoming notification is received, the display will not show the app name or the
name of the sender.
Changing settings on an iPhone
• Low Battery Notification
When the smartphone battery reaches a specified amount,
(remaining
smartphone battery) flashes on the smart computer.
• Phone / Email
When a notification arrives, [Phone] or [Mail] flashes on the smart computer’s screen,
with an audible alarm. After the notification closes,
/ (incoming call/email
notification icon) will flash.
*1: It is necessary to configure email account settings to receive incoming notification.
Smartphone
Tap (MENU) > [Device] > [Smart computer name], and then follow the procedure
below.
1. Tap [Notification Setting].
1. Tap [Notification Setting].
• Low Battery Notification
When the smartphone battery reaches a specified amount,
(remaining
smartphone battery) flashes on the smart computer.
• Phone / Messages / Email / Social Network
When a notification arrives, [Application name] and [Contact name] (alphabetical), or
[Phone number] or [Email address] flashes on the smart computer’s screen, with an
audible alarm.
* Contact name registered with non-alphabet characters will be displayed as “Other”.
After the notification closes,
/ / (incoming notification icon) and the
notification count will flash.
* The incoming notification icons and count cannot be displayed when screen
customization is set to display 8 screen segments.
* The incoming notification icons and count are reset when measurement is paused,
reset, or finished.
BEEP! BEEP! BEEP!
Designating a goal
The following explains how to designate a goal in simple navigation.
Smartphone
Tap (MENU) > [Device] > [Smart computer name], and then follow the procedure below.
1. Tap [Simple Navigation].
Under [Simple Navigation], there are four methods for designating a goal.
• Enter the address:
Enter an address in the search field.
• Select from a map:
Swipe the map to move the location, and long-press to confirm.
• Select from an iPhone contact:
Tap [History] > [Select from Contacts] to select a goal from the addresses of your
registered contacts.
• Select from history:
Tap [History] to select a goal from the history list.
Device
Changing the measurement screen
Device
This section explains how to change the display of the measurement screen.
Smartphone
Tap (MENU) > [Device] > [Smart computer name], and then follow the procedure below.
1. Tap [Display Customization].
Here, you can verify the current screen segments and functions (measurement data).
• Changing the order of screens 1 through 5:
Tap [Edit] and swipe the desired screen to change the order.
2. Tap a screen to change how it is displayed.
Select the measurement screens to show or hide and the screen segments and functions
(measurement data) to be displayed.
• Displaying/hiding the measurement screen
If the screen display is set to ON, that measurement screen will be displayed.
If it's set to OFF, that screen will not be displayed.
• Selecting screen segments:
Tap [Screen Segments] to select between [None] and [8 segments].
* The simple navigation function cannot be displayed when [Screen Segments] is set to
[7 segments] or [8 segments].
* The incoming notification icons and count cannot be displayed when [Screen
Segments] is set to [8 segments].
• Selecting a function (measurement data):
Tap [Function Names] or
to select a function.
• Reordering functions:
Tap [Edit] and swipe the desired function to another location to change the display
position.
* Screen customization settings will be applied to both Mirror Mode and Sensor Direct Mode.
Usage Instructions
Device
General
Account
Set up the service sites and social networking services (SNSs) to upload your activities.
1. Tap (MENU) and then [Account].
Adjust settings for the service sites below.
* You must have an account with the relevant site to upload data.
Service sites
CATEYE Atlas™
STRAVA™
TRAINING PEAKS™
SNS
Facebook™
Twitter™
* When using an SNS, links to activities uploaded to Cateye Atlas™ are posted.
Battery replacement
! Optional sensors
Speed (cadence) sensor (ISC-12)
If using a CATEYE sensor, the values related to the sensor's battery replacement period
start flashing to indicate that it is time to replace the battery.
Important
If smart computer's current speed or cadence display starts flashing, it is time to replace the
battery.
Install a new lithium battery (CR2032) so that the (+) side is visible and close the battery
cover securely.
Smart computer
When (battery icon) turns on, it is time to replace the battery.
1. Remove the battery cover and pull out the battery holder.
2. Insert two new lithium batteries (CR2032) into the battery holder, with the
(+) sides facing each other.
3. After replacing the battery, press AC on the back of the computer.
(Restart operation)
Battery
holder
Close
Open
Heart rate sensor (HR-12)
If using a CATEYE sensor, the values related to the sensor's battery replacement period
start flashing to indicate that it is time to replace the battery.
Important
If smart computer's heart rate display starts flashing, it is time to replace the battery.
Install a new lithium battery (CR2032) so that the (+) side is visible and close the battery
cover securely.
* After replacing the battery, always press RESET.
* After replacing the battery, always press RESET and check the position of the sensor
relative to the magnet.
Activating the sensor
• Power sensor
Refer to the power sensor instruction manual.
Activate the sensor via the following method:
• Speed sensor / Speed (cadence) sensor (ISC) / Cadence sensor
Move the magnet through the sensor zone several times. (Within 3 mm)
Sensor zone
Magnet
• Heart rate sensor
Rub both electrode pads with thumbs to transmit heart rate signal.
Electrode pads
Determining tire circumference
Determine tire circumference (L) by referring to the tire size chart or by measuring the actual
circumference of your bicycle tire.
Tire circumference reference table
* The tire size or ETRTO code is indicated on the side of the tire.
Measure actual tire circumference
With tire air pressure adjusted appropriately, apply a load to the bicycle.
Using the valve, etc., as a marker, rotate the tire once and measure the distance traveled
along the ground.
When using front
wheel for speed
measurement
When using rear
wheel for speed
measurement
Smartphone
1. Launch Cateye Cycling™, and from (MENU) turn on [Connect].
Smart computer
2. On the measurement screen, press MODE for 1 second to display the
smartphone search screen and connect with your smartphone.
When smart computer connects to a smartphone, it switches to the measurement standby
display.
* If the connection is made when Cateye Cycling™ is already measuring, [PAUSE] and
measured values are displayed.
* The appearance of the smart computer screen depends on the state of Cateye
Cycling™.
Smartphone connection is now complete.
Smartphone search
screen
Measurement
standby
Connecting smart computer and
smartphone
Power sensor calibration
• Before starting calibration, read the power sensor instruction manuals and check the
precautions for the calibration procedure. If calibration fails, accurate power measurement
cannot be made.
• Always perform calibration without any power applied to parts to which the power sensor is
attached (cranks, etc.)
Caution
When the power sensor is used continuously, slight variation may occur in its unloaded state.
Correct this by calibrating it periodically.
When making a particularly important measurement, it is recommended that you calibrate the
sensor in advance.
Smartphone
While the smart computer is connected and measurement is stopped, tap [Calibrate] on the
[Trip] screen.
Calibration is completed in 3 seconds.
Calibrate
Pairing with smart computer
Smart computer
1. On the measurement screen, press MODE for 1 second to display the
smartphone search screen.
2. From (MENU) at the top left of the screen, turn on [Connect] and tap
[Device].
Tap [Pair to Device] to start pairing.
When Cateye Cycling™ detects a smart computer, the smart computer's name will be
displayed on the screen, and pairing will be complete.
* To continue, tap [Smart computer name] to display the settings configuration screen for
the various smart computer settings.
Device
Smart computer pairing is now complete.
Smartphone search
screen
• Pairing is necessary to use a smart computer or a sensor.
• Do not pair sensors at a race venue or in similar locations where there are a lot of other
users. Doing so may cause the smart computer to be paired with another device.
Important
Pair a smart computer.
• Pairing is necessary to use a smart computer or a sensor.
• When using an iPhone, you cannot sync settings of commercial sensors.
When measuring in Sensor Direct Mode, it is necessary to configure sensor settings
separately via smart computer.
1. Switching to Sensor Direct Mode
2. Pairing a smart computer with a sensor
3. Tire circumference setting
Important
Pairing with a sensor
Smartphone
Tap [Pair to Device] to start pairing.
2. Activate the sensor.
Activating the sensor
When Cateye Cycling™ detects the sensor signal, a message is displayed on the
smartphone.
Tap [Pair]. The synchronized sensor is displayed on the [Device] screen and pairing is
completed.
* When pairing a sensor with Cateye Cycling™, an "A" is displayed after the sensor name.
* If you have paired a sensor capable of speed measurement, proceed to step 3.
3. Set the tire circumference for a sensor capable of speed measurement.
Tap [Device], and then tap [Sensor name] > [Tire Circumference] (the length of the outer
circumference of the tire).
Select the tire circumference according to the tire size written on the side of the tire.
Determining tire circumference
* Default value: 2096 mm (700x23c)
1. Verify that [Connect] is set to ON in the (MENU), and then tap
[Device].
Smart computer can be used with sensors compatible with Bluetooth 4.0. Pair it with optional
accessories or commercial sensors as required.
* Requires to set tire circumference for each sensor.
* You can also change sensor names and cancel pairing from this screen.
Sensor pairing is now complete.
* If you want to pair another sensor, repeat the same procedure again.
Cadence, heart rate, and power data will not be displayed under the initial configuration.
Change the measurement screen to be able to display measured values from paired
sensors.
Changing the measurement screen
Important
Switching to Sensor Direct Mode
Pairing a smart computer with a sensor
Tire circumference setting
Switch from Mirror Mode to Sensor Direct Mode.
Smartphone
1. Close Cateye Cycling™ or from (MENU), turn off [Connect].
Smart computer
2. From the smartphone search screen, press MODE for 1 second to switch
to Sensor Direct Mode.
* Smart computer will search for a sensor instead of your smartphone. In this mode, the
sensor icon flashes to indicate sensor reception status.
• S (Flash): When the speed signal is received
• C (Flash): When the cadence signal is received
• S/C (S and C flash simultaneously): When the speed/cadence (ISC) sensor signal is
received
• H (Flash): When the heart rate signal is received
• P (Flash): When the power signal is received
(1 second)
Smartphone search
screen
Measurement
screen
Sensor Direct Mode and Mirror Mode measure independently and data has no continuity.
Important
Switching to Sensor Direct Mode
Pairing a smart computer with a sensor
• Pairing (sensor ID synchronization) must be performed in order to use a sensor.
• Do not pair sensors at a race venue or in similar locations where there are a lot of other
users. Doing so may cause the smart computer to be paired with another device.
• Pair all sensors that you intend to use.
Currently, only Bluetooth sensors that comply with Bluetooth Low Energy (BLE) profiles can
be used in Sensor Direct Mode.
Important
Pair a sensor that you want to use with smart computer.
1. From the measurement screen, press OPTION for 2 seconds to switch to
the sensor pairing screen.
* When the sensor pairing screen is left on for 1 minute, the smart computer returns to the
measurement screen.
2. Press SS/LAP to start pairing.
3. Activate the sensor that you want to pair.
Activating the sensor
The name of the synchronized sensor is displayed and pairing is completed.
• SP : Speed sensor
• ISC : Speed/cadence sensor
• CD : Cadence sensor
(2 seconds)
Sensor pairing
screen
Measurement
screen
Sensor
activated
Synchronizatio
n complete
Ready for
synchronization
Tire circumference setting
• HR : Heart rate sensor
• PW : Power sensor
* When pairing a sensor with a smart computer, a "C" is displayed after the sensor
name.
When the smart computer displays [ID FULL] on the screen and returns to the sensor
pairing screen, the maximum number of sensors have been paired.
Up to 9 separate sensor IDs can be paired with the smart computer.
If the maximum number of sensors have been paired, in the sensor pairing screen, press
OPTION for 4 seconds to clear all pairings.
Then re-pair the required sensors.
Important
* Pairing standby time is 5 minutes.
Activate the sensor within this time.
* If you want to pair another sensor, repeat steps 2 and 3.
4. Press OPTION to return to the measurement screen.
Pairing is now complete.
If you have paired a sensor capable of speed measurement, proceed with setting the tire
circumference.
Switching to Sensor Direct Mode
Pairing a smart computer with a sensor
Tire circumference setting
1. From the measurement screen, press OPTION for 2 seconds to switch to
the sensor pairing screen.
* When the sensor pairing screen is left on for 1 minute, the smart computer returns to the
measurement screen.
2. Select the sensor you want to set, and enter the tire circumference.
Enter the circumference in mm of the tire (the length of the outer circumference of the tire)
on which the sensor is installed.
(Setting range: 0100 – 3999 mm)
Determining tire circumference
(2 seconds)
Sensor pairing
screen
Measurement
screen
• Pairing (sensor ID synchronization) must be performed first.
Pairing a smart computer with a sensor
• Set tire circumference for each sensor.
The default value is 2096 mm (700x23c).
Important
Set the tire circumference for a sensor capable of speed measurement.
* Sensors that can be selected are those that have been paired with Cateye Cycling™ or
a smart computer. The letter that appears after the sensor name indicates how the
sensor was paired.
• A : Sensor paired with Cateye Cycling™
• C : Sensor paired with a smart computer
* Error is displayed if values outside the setting range are entered.
3. Press OPTION to confirm settings.
Pressing OPTION again returns to the measurement screen.
* If you have changed settings, always press OPTION to confirm changes.
This completes the tire circumference setting procedure.
Sensor
selection
(1 second)
(1 second)
Increase
numbers
Tire circumference
value
Move to
next digit
Mounting the speed (cadence) sensor (ISC-12)
The speed (cadence) sensor can be mounted either on the top or bottom of the chain stay.
Watch video
* Mounting procedures give instructions for mounting on the top of the chain stay.
See illustrations
1. Temporarily attach the sensor to the left chain stay.
! Mounting on top of chain stay
Cadence magnet
Wheel
magnet
Speed (cadence)
sensor
Cadence
magnet
Wheel magnet
Speed (cadence) sensor
If the speed (cadence) sensor is mounted on the bottom of the chain stay rather than on the
top, the adjustment range between the sensor and the magnet will be narrower.
Caution
! Mounting on bottom of chain stay
Sensor
rubber pad
(1) Loosen the sensor screw using a Phillips screwdriver and check that the sensor arm
moves.
Nylon tie
left chain stay
Cadence
magnet
Inside of the crank
Spoke
Nylon tie
Sensor
zone
Wheel
magnet
Do not fully tighten the nylon ties. Once the nylon ties are fully tightened they cannot be
removed.
Caution
(2) Attach the sensor rubber pad to the sensor.
(3) Refer to the illustration and temporarily attach the
sensor to the left chain stay with nylon ties.
2. Temporarily attach the magnet.
Sensor screw
Sensor arm
(1) Using a nylon tie, temporarily attach the cadence magnet to the inside of the left crank
arm so that it faces the cadence sensor zone.
(2) Rotate the sensor arm and temporarily attach the wheel magnet to a spoke facing the
speed sensor zone.
* If the sensor cannot is not positioned so that both magnets (speed and cadence) pass
through their respective sensor zones, reposition the sensor and the magnets so that
each magnet passes through its sensor zone.
3. Adjust the gap between the sensor zone and the magnet.
(1) Tilt the sensor so that the gap between the cadence magnet and the cadence sensor
zone is approximately 3 mm, then fasten the sensor securely with nylon ties.
Cadence
magnet
Wheel magnet
Sensor screw
(2) Rotate the sensor arm so that the gap between the wheel magnet and the speed
sensor zone is approximately 3 mm, then tighten the sensor screw securely.
4. Secure all parts.
Tighten the sensor's nylon ties, the sensor screw, and the magnets, and check that they
are not loose.
Trim off the excess nylon tie.
* If using pedals with steel axles, the cadence magnet can be attached magnetically to
the pedal axle. In this case, remove the adhesive tape from the magnet and do not use
the nylon tie.
Wearing the heart rate sensor (HR-12)
Heart rate measurement is performed by wearing a heart rate sensor around the chest.
Before wearing the heart rate sensor
• To eliminate measurement errors, it is recommended to moisten the electrode pads with
water or apply electrolyte cream to the pads.
• If you have sensitive skin, moisten the electrode pads with water and wear it over a thin
shirt.
• Chest hair may interfere with measurement in some cases.
Watch video
Never use this device if you use a pacemaker.
Warning
See illustrations
1. Attach the sensor to the HR strap.
Press until you hear a clicking sound.
2. Wear the HR strap by sliding the hook over the other end of the strap.
Wind the HR strap around your body and adjust the length to suit your chest (underbust).
Overtightening the strap may cause discomfort during measurement.
Heart rate sensor
HR strap
Hook
Electrode
pads
Back side
* Wear the heart rate sensor so that TOP faces up.
* Ensure that the electrode pads are in close contact with your body.
* If you have dry skin or are wearing the sensor over a shirt, measurement errors may
result. In such cases, moisten the electrode pads with water.
Frequently Asked Questions
Difference between "finishing a trip" and "completing measurement"
What does "finishing a trip" mean?
• "Finishing a trip" refers to resetting smart computer (by pressing MODE for 3 seconds).
This action resets measurement values to 0 and changes the screen to the "ready"
display. You can then start measuring your next trip.
What does "completing measurement" mean?
• "Completing measurement" refers to saving and uploading a trip or a series of trips from
the save & upload screen in Cateye Cycling™. You can do this by tapping
(Flag) on
the trips screen in Cateye Cycling™.
Data cannot be reset
On the measurement screen, press MODE for 3 seconds.
Measurement does not work
In Sensor Direct Mode
Cannot measure heart rate
Cannot measure power
In Mirror Mode
Abnormal display
General
Altitude
Simple navigation and compass
Heart rate
Power
Why does my smartphone battery drain so quickly?
Have you been leaving [Connect] turned on in Cateye Cycling™ even when you are
not performing measurement?
• It is recommended that you turn off [Connect] from
(MENU) to minimize
smartphone battery drain.
Data cannot be uploaded
Why can't I upload activities to a service site?
• Have you completed login settings for each service site? From Cateye Cycling™, tap
(MENU) > [Account], and then complete login settings by entering account information
for each site.
Posting to Facebook from an iPhone is not possible
• Follow the procedure below to resolve the issue.
1. On the iPhone, tap [Settings] > [Facebook].
2. Under “Allow These Apps to Use Your Account”, switch “Cycling” off and then back
on.
Data is not saved
Why is data sometimes not saved as summary data even after a reset operation?
• Measurements for trips of 0.1 km or shorter are not saved as summary data.
Frequently Asked Questions
Abnormal display : General
The screen is frozen. What should I do?
The following procedure explains how to restart the smart computer.
1. Press the AC button on the smart computer.
The initialization screen is displayed.
2. Press MODE once to cause [RESTART] to blink, and then press MODE
for 1 second.
The display is behaving abnormally. How do I fix it?
The display may be abnormal if there is something that emits radio waves (such as
railway tracks or a TV transmitter station) in the vicinity. Move away from the possible
cause, reset smart computer (press MODE for 3 seconds), and start measurement again.
Why is the display blank?
The battery is flat. Replace the battery with a new one.
Battery Replacement : Smart computer
Measurements from a paired sensor are not displayed on the smart computer screen
Heart rate, cadence, and power data will not be displayed under the initial configuration of
the measurement screen.
On Cateye Cycling™, tap
(MENU) > [Device] > [PADRONE SMART+] > [Display
Customization] to change the measurement screen so that measured values from paired
sensors can be displayed.
Changing the measurement screen
Why are speed values strange?
If you are not using a sensor that is capable of measuring speed, smart computer uses
your smartphone's GPS for measurement, so depending on reception conditions (for
example, if you are in a tunnel), measurement may be interrupted or smart computer may
indicate values other than actual values.
Why are power values flashing on and off?
When using separate left and right power sensors, power values flash on and off to
indicate that only signals from one sensor are being received.
Check the power sensor.
Current speed, cadence, and heart rate values are flashing
If using a CATEYE sensor, measurement values start flashing to indicate that there is little
remaining battery power in the relevant sensor.
Replace the battery for the relevant sensor.
Battery replacement : Optional sensors
Screen is locked
Press SS/LAP and OPTION at the same time to unlock.
Button lock
Unlock
MEMORY FULL is displayed on the screen
The smart computer's memory is full.
If you are using the smart computer linked to a smartphone, connect to Cateye Cycling™
and import summary data. This will clear the memory and the message will disappear.
The smart computer will restart and switch to the smartphone search screen.
Confirm
(1 second)
Frequently Asked Questions
Abnormal display : Altitude
Why is there variation in measurement values for ascending altitude?
As altitude measurement relies on the smartphone's GPS function, it may be different from
the actual altitude.
Frequently Asked Questions
Abnormal display:
Simple navigation and compass
Simple navigation cannot be displayed
Did you press and hold the OPTION on the back of the smart computer?
• After specifying the destination using Cateye Cycling™, press and hold the OPTION on
the smart computer to display the simple navigation function.
Simple navigation function
Is smart computer in Sensor Direct Mode?
• Simple navigation cannot be displayed in Sensor Direct Mode.
Switch to Mirror Mode to use simple navigation.
Connecting smart computer and smartphone
Does the measurement screen show 7 or 8 screen segments?
• Simple navigation is shown when the measurement screen has between 1 and 6
segments. Press MODE to change the screen or change the number of screen
segments in screen customization.
* To configure the screen segment settings for the measurement screen, tap
(MENU) > [Device] > [Smart computer name] > [Display Customization].
Changing the measurement screen
The compass points the wrong way.
Because the compass relies on the smartphone's GPS function, the reading may be
different from the actual reading.
Frequently Asked Questions
Abnormal display : Heart rate
Heart rate display is unstable. What should I do?
The heart rate sensor may not be attached correctly.
• Refer to the heart rate sensor instruction manual and attach the heart rate sensor in the
correct position.
Wearing the heart rate sensor
• Ensure that the heart rate sensor is attached so that TOP is facing up.
• Try moving the electrode from the left to the right so that it sits over your heart. This may
improve heart rate display in some cases.
Why are heart rate readings still displayed even after I take off the sensor?
When using a sensor made by another company, heart rate may continue to be displayed for
a long time after the sensor has been removed.
Frequently Asked Questions
Abnormal display : Power
Power display is not accurate. How can I fix it?
Calibrate the power sensor.
Power sensor calibration
* Calibrate using Cateye Cycling™. In Sensor Direct Mode, connect to a smartphone and
perform calibration.
Connecting smart computer and smartphone
Frequently Asked Questions
Measurement does not work :
In Mirror Mode
Cannot connect to smartphone via the smart computer's smartphone search screen
Is [Connect] under (MENU) set to [ON] in Cateye Cycling™?
• Ensure that [Connect] is set to [ON].
Smart computer does not switch to Mirror Mode measurement screen. What should I do?
Have you installed Cateye Cycling™ in your smartphone?
• Install Cateye Cycling™.
If using an iPhone
If using an Android smartphone
* See Cateye Cycling Recommended Devices for the latest information about
smartphones recommended for use with Cateye Cycling™.
Have you paired your smartphone with smart computer?
• If you do not pair smart computer via Cateye Cycling™, smart computer cannot perform
Mirror Mode measurement.
Pairing with smart computer
s [Connect] set to [ON] in the Cateye Cycling™ menu on your smartphone?
• Set [Connect] to [ON] or close Cateye Cycling™.
Is smart computer in Sensor Direct Mode?
• Press MODE for 1 second.
Smart computer switches to the smartphone search screen and connects with your
smartphone.
Connecting smart computer and smartphone
Why is the sensor signal not being received?
Have you paired the sensor?
• You must pair smart computer with your smartphone via Cateye Cycling™.
Pairing with a sensor
Why can't I measure speed?
When using a speed (cadence) sensor (ISC-12), if the wheel magnet moves so that it is
not facing the sensor zone, the computer registers the speed signal as 0 and
measurement is not possible. (This is because the speed signal from the sensor has
priority over GPS when measuring speed.)
[PAUSE] and measurement
Measurement is paused.
Press SS/LAP for 1 second to resume measurement.
Paused
The display says [READY], but measurement will not start. What should I do?
Press SS/LAP for 1 second to start measurement.
Tapping the
(Start Measurement) in Cateye Cycling™ has the same effect.
Measurement
standby
If a connection cannot be established even when set to [ON], perform pairing with the
smart computer again. Solutions will vary depending on the smartphone and model.
• Padrone Smart users with iPhones
Remove the smart computer registered under [Settings] > [Bluetooth] on the iPhone.
Then remove the smart computer once under
(MENU) > [Device] in Cateye
Cycling™, and perform pairing again.
Pairing with smart computer
• For Strada Smart users and Android smartphone users:
Under
(MENU) > [Device] in Cateye Cycling™, remove the smart computer once
and perform pairing again.
Pairing with smart computer
I lost the connection between my smartphone and a connected device (smart computer or
sensor).
How do I reconnect them?
If you cannot reconnect to the sensor
Press the reset button on the sensor.
If this does not resolve the issue, restart your smartphone.
If you cannot reconnect to the smart computer
Cateye Cycling™ may have terminated abnormally.
• Start Cateye Cycling™.
If this does not resolve the issue, try the procedure below:
• Restart your smartphone.
• Restart the smart computer.
1. Press the AC button on the smart computer.
The initialization screen is displayed.
2. Press MODE once to cause [RESTART] to blink, and then press MODE for 1
second.
Why can't I measure without a speed sensor?
You may have to wait a little longer after starting measurement.
• Your smartphone may take a while to acquire GPS in some cases.
Wait somewhere outdoors for a while before starting.
* The time it takes to acquire GPS will depend on your smartphone.
The location or weather may not be appropriate for acquiring a GPS signal.
• If your smartphone's GPS connection is lost, smart computer can no longer perform
measurement.
* For information on how to acquire a GPS signal, refer to your smartphone instruction
manual.
Are you using a Bluetooth Smart sensor?
• Smart computer can only receive signals from Bluetooth Smart sensors.
The sensor battery may be flat.
• Replace the battery with a new one.
Battery replacement : Optional sensors
The magnet may not be in the correct position relative to the speed sensor or speed
(cadence) sensor (ISC).
Refer to the sensor instruction manual and attach the sensor correctly.
Mounting the speed (cadence) sensor (ISC-12)
Smart computer operation is abnormal.
What should I do?
Restart your smartphone.
If the situation does not resolve the issue, restart the smart computer.
1. Press the AC button on the smart computer.
The initialization screen is displayed.
2. Press MODE once to cause [RESTART] to blink, and then press MODE
for 1 second.
The smart computer will restart and switch to the smartphone search screen.
Confirm
(1 second)
The smart computer shows a blank screen after leaving the bike and then coming back to it
When the smartphone moves away from the bicycle even for a short time, the smart
computer may automatically enter sleep mode and show a blank screen.
Clicking smart computer will make it enter smartphone search mode, allowing you to
reconnect to your smartphone.
The smart computer will restart and switch to the smartphone search screen.
Confirm
(1 second)
Frequently Asked Questions
Measurement does not work :
In Sensor Direct Mode
Why is the sensor signal not being received?
Is [Connect] set to [ON] in the Cateye Cycling™ menu on your smartphone?
• Set [Connect] to [OFF] or close Cateye Cycling™.
Have you paired the sensor?
• The sensor must be paired with smart computer.
Pairing with a sensor
You may be using another smartphone app at the same time that can connect with
Bluetooth sensors.
• Another Bluetooth device may be connected with your smartphone. Bluetooth sensors
are only able to connect with a single device at a time. Stop using the other app or
change its settings so that it does not connect to Bluetooth sensors.
You may be using an iPhone with a commercial sensor.
• Sensors made by another company must be paired separately with smart computer. The
same applies to tire circumference for sensors capable of measuring speed.
Pairing with a sensor
Tire circumference setting
Are you using a Bluetooth Smart sensor?
• Smart computer can only receive signals from Bluetooth Smart sensors.
The sensor battery may be flat.
• Replace the battery with a new one.
Battery replacement : Optional sensors
The magnet may not be in the correct position relative to the speed sensor or speed
(cadence) sensor (ISC).
• Refer to the sensor instruction manual and attach the sensor correctly.
Why does smart computer not switch to the measurement screen?
Is the smartphone icon displayed on the entire screen?
• The smart computer is in Mirror Mode. Press MODE for 1 second to switch to Sensor
Direct Mode.
Smartphone search
screen
Smart computer operation is abnormal.
What should I do?
The following procedure explains how to restart the smart computer.
1. Press the AC button on the smart computer.
The initialization screen is displayed.
2. Press MODE once to cause [RESTART] to blink, and then press MODE
for 1 second.
The smart computer will restart and switch to the smartphone search screen.
Confirm
(1 second)
Mounting the speed (cadence) sensor (ISC-12)
Frequently Asked Questions
Measurement does not work :
Cannot measure heart rate
Why isn't the [H] icon flashing?
Have you paired the sensor?
• The sensor must be paired with Cateye Cycling™ or with smart computer.
Pairing with a sensor
The electrode pad may have slipped out of position.
• Check that the electrode pad is still in close contact with your body.
Your skin may be dry.
• Wet the electrode pad a little.
The electrode pad may have deteriorated or become damaged due to prolonged
usage.
• If this is the case, replace the attachment belt with a new one.
Frequently Asked Questions
Measurement does not work :
Cannot measure power
Why isn't the [P] icon flashing?
Have you paired the sensor?
• The sensor must be paired with Cateye Cycling™ or with smart computer.
Pairing with a sensor
The power sensor may not be attached correctly.
• Refer to the power sensor instruction manual and attach the power sensor correctly.
Handling and Support
Standard accessories / Optional accessories
Standard accessories
1600280N
Bracket band
160 2194
Bracket kit
Maintenance
If smart computer unit or accessories become dirty, clean with a soft cloth moistened with
mild detergent, and then wipe with a dry cloth.
Never apply paint thinner, benzine or alcohol; damage will result.
Caution
Smart computer / Optional sensors
• Do not concentrate on smart computer or your smartphone while riding. Always ride
safely.
• Mount the bracket, sensor, and other components securely, and check them periodically
to ensure that they are not loose.
• Do not leave smart computer in direct sunlight for a long period of time.
• Never disassemble smart computer.
• Do not drop smart computer. Doing so may result in damage or personal injury.
• Always install the bracket band dial by hand. Using a tool or other object to tighten the
dial may crush the screw thread.
• When cleaning the smart computer and accessories, do not use thinners, benzine, or
alcohol.
• Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to local regulations.
• The LCD screen may be distorted when viewed through sunglasses with polarized lens.
Cateye Cycling™
Smart computer can be used with the Cateye Cycling™ smartphone app for measurement
and settings.
Downloading and using applications involves communication charges. It is therefore
recommended to use Wi-Fi.
Specifications
Batteries used/battery life
! Smart computer
Lithium battery (CR2032) x2 / Approximately 4 months
(When ISC-12 and HR-12 are paired and used for one hour a day.)
! Optional accessories
• Heart rate sensor (HR-12):
Lithium battery (CR2032) x1 / Approximately 5 months
(If used for 1 hour a day.)
• Speed sensor (ISC-12):
Lithium battery (CR2032) x1 / Approximately 5 months
(If used for 1 hour a day.)
* It may be shortened significantly when backlight is used frequently.
* As pre-installed battery is for monitor use, battery life may be shorter than that indicated
above.
160 3970
Speed sensor
(ISC-12)
160 3980
Heart rate sensor (HR-12)
160 3595
HR strap
160 4100
Out-front bracket
169 9766
Cadence magnet
1699691N
Wheel magnet
160 2193
Bracket
166 5150
Lithium battery (CR2032)
Optional accessories
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by
CATEYE Co., Ltd. is under license. Other trademarks and trade names are those of their respective
owners.
Product warranty
2-year guarantee
• Padrone Smart + unit
• ISC-12 Speed/cadence sensor
• HR-12 Heart rate sensor
(Accessories and battery consumption excluded)
CatEye cycle computers are warranted to be free of defects from materials and
workmanship for a period of two years from original purchase. If the product fails to work
due to normal use, CatEye will repair or replace the defect at no charge. Service must be
performed by CatEye or an authorized retailer. To return the product, pack it carefully and
enclose the warranty certificate (proof of purchase) with instruction for repair. Please write
or type your name and address clearly on the warranty certificate. Insurance, handling and
transportation charges to CatEye shall be borne by person desiring service. For UK and
REPUBLIC OF IRELAND consumers, please return to the place of purchase. This does
not affect your statutory rights.
* Battery life may be reduced depending on the number of sensors paired and usage
conditions.
Controller
Microcomputer (Crystal controlled oscillator)
Display
Liquid crystal display (LCD)
Current speed and cadence detection
Non-contact magnetic sensor (ISC-12)
* Current speed can also be measured via smartphone GPS.
Sensor signal transmission/reception
Bluetooth 4.0
Signal range
Approx. 30 m (The range will vary depending on weather and surroundings.)
Speed sensor tire circumference range
0100 to 3,999 mm
(Default value: 2096 mm)
Operating temperature range
0°C to 40°C
* Display visibility may deteriorate if used outside operating temperature range.
Dimensions/weight
! Smart computer
2-29/32” x 1-13/16” x 25/32” (74 x 46 x 20 mm) / 1.41 oz (40 g)
! Optional accessories
• Heart rate sensor (HR-12):
1-7/32" x 2-29/64" x 29/64" (31 x 62.5 x 11.8 mm) / 0.59 oz (16.6 g)
• Speed sensor (ISC-12):
2-49/64" x 3-25/64" x 59/64"
(70.4 x 86.3 x 23.5 mm) / 0.68 oz (19.2 g)
(With arm pointing down)
* Specifications and design are subject to change without notice.
2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan
Attn: CATEYE Customer Service Section
Phone : (06)6719-6863
Fax : (06)6719-6033
E-mail : support@cateye.co.jp
URL : http://www.cateye.com
[For US Customers]
CATEYE AMERICA, INC.
2825 Wilderness Place Suite 1200, Boulder CO 80301-5494 USA
Phone : 303.443.4595
Toll Free : 800.5.CATEYE
Fax : 303.473.0006
E-mail : service@cateye.com
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p) is not more than that
necessary for successful communication.
Conformément á la réglementation d’lndustrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d’un type d’un gain maximal (ou inférieur) approuvé pour
l’émetteur par lndustrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique á l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain
de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e) ne dépasse pas l’intensité
nécessaire á l’établissement d’une communication satisfaisante.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’lndustrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
CAN ICES-3 (B) / NMB-3 (B)
Legal Notices
… 151 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cateye CC-SC100B - Padrone Smart plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cateye CC-SC100B - Padrone Smart plus in de taal/talen: Engels als bijlage per email.

De handleiding is 3,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Cateye CC-SC100B - Padrone Smart plus

Cateye CC-SC100B - Padrone Smart plus Gebruiksaanwijzing - Nederlands - 158 pagina's

Cateye CC-SC100B - Padrone Smart plus Gebruiksaanwijzing - Deutsch - 159 pagina's

Cateye CC-SC100B - Padrone Smart plus Snelstart handleiding - English - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info