580398

Cateye CC-RD500B Strada Smart Handleiding

17
Verklein
Vergroot
Pagina terug
1/142
Pagina verder
Usage Instructions
Select the devices you have.
* Instructions differ depending on the devices you have.
* For explanatory purposes, in this manual red text/icons on the smart computer screen
represent flashing items.
* The display screens and illustrations used in this manual are provided for instructional
purposes only. Actual screens and illustrations may differ depending on devices used.
* The online manual and YouTube videos for this product are subject to change without
notice.
Setup method
Setup with smartphone
Setup method
 If you have purchased smart computer
Checking package contents
Setup (first time only)
Mounting the bracket
 If you have not yet purchased smart computer
Setup (first time only)
 Optional accessories
Mounting the speed (cadence) sensor (ISC-12)
Wearing the heart rate sensor (HR-12)
* Mount non-CatEye sensors as directed in relevant instruction manuals.
Setup with smartphone
Checking package contents
Smart computer unit
Bracket band
Bracket
Bracket rubber pad
Dial
* The Speed + Cadence Kit includes an integrated speed (cadence) sensor (ISC-12) in
addition to the items above.
* The Triple Wireless Kit includes an integrated speed (cadence) sensor (ISC-12) and a heart
rate sensor (HR-12).
Mounting the bracket
Setup
Checking package contents
Setup
Setup with smartphone
Setup uses the Cateye Cycling™ smartphone app (free).
1. Install Cateye Cycling™.
If using an iPhone
If using an Android smartphone
Smartphone
Pull free the smart computer's insulation sheet.
After you pull free the insulation sheet, return the battery cover to its previous location.
* If characters are lit on the LCD screen, you can use the product as is.
  
Insulation
sheet
Padrone Smart
Close
Open
Insulation
sheet
Strada Smart
Press
Slide
Waterproof
inner cap
Smart computer
When you use this device for the first time, follow the procedure below to set the smartphone
and smart computer.
* See Cateye Cycling Recommended Devices for the latest information about
smartphones recommended for use with Cateye Cycling™.
2. Launch Cateye Cycling™.
Follow the on-screen instructions and allow the use of GPS and Bluetooth® devices.
Once basic settings are complete the Trip screen appears.
3. Pair smart computer with sensors.
When the smartphone's Bluetooth settings are turned on, it will search for devices, but
do not configure settings at this stage. Switch to Cateye Cycling™ and follow the
procedure below.
Important
• Pairing (sensor ID synchronization) must be performed in order to use smart computer
and sensors.
• Do not pair sensors at a race venue or in similar locations where there are many other
users. Doing so may cause smart computer to be paired with another device.
Important
From
(MENU) at the top left of the screen, turn on [Connect], and then tap [Device].
Tap [Device Pairing] to start pairing.
For instructions on using devices, refer to the following:
Pairing with smart computer
Smart computer
1. Format (initialize) smart computer.
All data will be deleted and smart computer will be reset to factory default settings.
Caution
While holding down the MENU button on smart computer, press the AC button.
When Cateye Cycling™ detects smart computer, a message is displayed on the
smartphone.
Tap [Pairing] to complete pairing.
* If you are using Padrone Smart with an iPhone, a subsequent message will be
displayed.
Tap [Pair] again.
After pairing is completed, from
(MENU) at the top left of the screen, tap [Trip] to
switch to the Trip screen.
Smartphone
Smart computer
The whole display turns on and then switches to the smartphone search screen.
Whole display
turns on
Smartphone search
screen
* If smart computer switches to the measurement screen without the whole screen
turning on, it has not been formatted. Redo the procedure.
* The appearance of the smart computer screen depends on the state of Cateye
Cycling™.
Pairing with a sensor
1. Activate the sensor.
Activating the sensor
When Cateye Cycling™ detects the sensor signal, a message is displayed on the
smartphone.
Tap [Pair]. The synchronized sensor is displayed on the [Device] screen and pairing is
completed.
* When pairing a sensor with Cateye Cycling™, an "A" is displayed after the sensor
name.
* If you have paired a sensor capable of speed measurement, proceed to step 2.
2. Enter the tire circumference.
From the [Device] screen, tap the added sensor and select a tire circumference (the
length of the outer circumference of the tire).
* Default value: 2096 mm (700x23c)
* Set tire circumference for each sensor.
* You can also change sensor names and cancel pairing from this screen.
Determining tire circumference
Sensor pairing is now complete.
* Pair all sensors that you intend to use.
If you want to pair another sensor, repeat the same procedure again.
Smartphone
• Pair all sensors that you intend to use. If you want to pair another sensor, repeat the
same procedure again.
• When using an iPhone, you cannot sync settings of commercial sensors.
When measuring in Sensor Direct Mode, it is necessary to configure sensor settings
separately via smart computer.
1. Switching to Sensor Direct Mode
2. Pairing (Sensor ID synchronization)
3. Tire circumference setting
Important
Smart computer can be used with sensors compatible with Bluetooth 4.0. Pair it with
optional accessories or commercial sensors as required.
When pairing is complete, smart computer switches from the smartphone search screen
to the [ready] (measurement standby) display.
Smart computer pairing is now complete.
* If you have other sensors, continue pairing them.
Smartphone search
screen
Measurement
standby
Mounting the bracket
Switching to Sensor Direct Mode
Smartphone
Smart computer
1. Close Cateye Cycling™ or from (MENU), turn off [Connect].
2. Switch smart computer to Sensor Direct Mode.
Measurement screen
(Sensor Direct Mode)
Smartphone search
screen
(1 second)
* Smart computer will search for a sensor instead of your smartphone. In this mode, the
sensor icon flashes to indicate sensor reception status.
• S (Flash): When the speed signal is received
• C (Flash): When the cadence signal is received
• S/C (S and C flash simultaneously): When the speed/cadence (ISC) sensor
signal is received
• H (Flash): When the heart rate signal is received
• P (Flash): When the power signal is received
Sensor Direct Mode and Mirror Mode measure independently and data has no continuity.
Important
Pairing (Sensor ID synchronization)
Setup
Tire circumference setting
Switching to Sensor Direct Mode
Pairing (Sensor ID synchronization)
Pair a sensor that you want to use with smart computer.
• Pairing (sensor ID synchronization) must be performed in order to use a sensor.
• Do not pair sensors at a race venue or in similar locations where there are many other
users. Doing so may cause smart computer to be paired with another sensor.
• Pair all sensors that you intend to use.
Important
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, smart computer returns to the
measurement screen.
2. Press MODE to display the screen shown below, and then press MODE
for 2 seconds.
3. Activate the sensor that you want to pair.
Activating the sensor
The synchronized sensor is displayed on the top of the screen and pairing is completed.
Measurement
screen
Menu screen
(Clock setting)
(2 seconds)
Ready for
synchronization
Sensor
activated
Synchronization
complete
Setup
• SP : Speed sensor
• ISC : Speed/cadence sensor
• CD : Cadence sensor
• HR : Heart rate sensor
• PW : Power sensor
* When pairing a sensor with a smart computer, a "C" is displayed after the sensor name.
* Pairing standby time is 5 minutes. Activate the sensor within this time.
4. Press MENU to confirm pairing.
If you want to continue pairing another sensor, repeat the same operations again.
Pressing MENU again returns to the measurement screen.
* If you have changed settings, always press MENU to confirm changes.
When smart computer displays [FULL] on the screen and returns to the menu:
Up to 9 separate sensor IDs can be paired with smart computer. If the maximum number
of sensors have been paired, with the computer in pairing standby state, press MENU
for 4 seconds to clear all pairings.
Important
Tire circumference setting
Switching to Sensor Direct Mode
Pairing (Sensor ID synchronization)
Tire circumference setting
Setup
Set the tire circumference for a sensor capable of speed measurement.
• Pairing (sensor ID synchronization) must be performed first.
Pairing (Sensor ID synchronization)
• Set tire circumference for each sensor. The default value is 2,096 mm (700x23c).
Important
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, smart computer returns to the
measurement screen.
2. Press MODE to display (tire icon) and then press MODE for 2
seconds.
3. Select the sensor you want to set, and enter the tire circumference.
Enter the circumference in mm of the tire (the length of the outer circumference of the tire)
on which the sensor is installed.
(Setting range: 0100 – 3999 mm)
Determining tire circumference
Measurement
screen
Menu screen
(Clock setting)
(2 seconds)
* Sensors that can be selected are those that have been paired with Cateye Cycling™ or
a smart computer. The letter that appears after the sensor name indicates how the
sensor was paired.
• A : Sensor paired with Cateye Cycling™
• C : Sensor paired with a smart computer
* Error is displayed if values outside the setting range are entered.
4. Press MENU to confirm settings.
Pressing MENU again returns to the measurement screen.
* If you have changed settings, always press MENU to confirm changes.
Sensor selection
(2 seconds)(2 seconds)
(2 seconds)
Increase numbers
Tire circumference value
Move to next digit
See illustrations
Bracket
band
Bracket
• When mounting on the stem
• When mounting on the handlebar
• Mounting and removing the smart computer unit
!When mounting on the stem
1. Check bracket orientation and attach it to the bracket band.
2. Remove the seal from the bracket rubber pad and stick the bracket
rubber pad onto the bracket band.
Bracket
rubber pad
3. Loop the bracket band around the stem and tighten the dial to secure
it.
Mounting the bracket
Setup
Checking package contents
The bracket can be mounted on either the stem or the handlebar.
Setup with smartphone
Watch video
• Always tighten the dial by hand.
Using a tool or other object to tighten the dial may crush the screw thread.
• Trim bracket band carefully so the cut end will not cause injury (see step 3 above).
Caution
Dial
Cut
Cut
• Always tighten the dial by hand.
Using a tool or other object to tighten the dial may crush the screw thread.
• Trim bracket band carefully so the cut end will not cause injury (see step 3 above).
Caution
!When mounting on the handlebar
1. Check bracket orientation and attach it to the bracket band.
Bracket
band
Bracket
2. Remove the seal from the bracket rubber pad and stick the bracket
rubber pad onto the bracket band.
Bracket
rubber pad
3. Loop the bracket band around the handlebar and tighten the dial to
secure it.
Dial
!Mounting and removing the smart computer unit
To remove smart computer, push out while holding the unit with the other hand to
ensure that it does not fall.
Caution
Removing
Click
While holding smart computer
Push out
Mounting
Setup
Setup with smartphone
Cateye Cycling™, Cateye's free smartphone app, records trip data using your smartphone's
GPS.
By combining the app with a Bluetooth sensor, it is also possible to reliably measure heart
rate, cadence, and other data as well as current speed.
1. Install Cateye Cycling™.
If using an iPhone
If using an Android smartphone
* See Cateye Cycling Recommended Devices for the latest information about
smartphones recommended for use with Cateye Cycling™.
2. Launch Cateye Cycling™.
Follow the on-screen instructions and allow the use of GPS and Bluetooth devices.
Once basic settings are complete the Trip screen appears.
* If you are not planning to use a sensor, setup is now complete.
If you are planning to use a sensor, follow the procedure below.
When the smartphone's Bluetooth settings are turned on, it will search for devices, but
do not configure settings at this stage. Switch to Cateye Cycling™ and follow the
procedure below.
Important
Pairing with a sensor
• Pairing (ID synchronization) must be performed in order to use a sensor.
• Do not pair sensors at a race venue or in similar locations where there are many other
users. Doing so may cause smart computer to be paired with another device.
Important
Cateye Cycling™ can be used with sensors compatible with Bluetooth 4.0. Pair it with
optional accessories or commercial sensors as required.
• Pair all sensors that you intend to use. If you want to pair another sensor, repeat the
same procedure again.
1. Pair with a sensor.
From (MENU) at the top left of the screen, turn on [Connect], and then tap
[Device].
Tap [Device Pairing] to start pairing.
2. Activate the sensor.
Activating the sensor
When Cateye Cycling™ detects the sensor signal, a message is displayed on the
smartphone.
Tap [Pair]. The verified sensor is displayed on the [Device] screen and pairing is
completed.
* When pairing a sensor with Cateye Cycling™, an "A" is displayed after the sensor
name.
* If you have paired a sensor capable of speed measurement, proceed to step 3.
3. Enter the tire circumference.
From the [Device] screen, tap the added sensor and select a tire circumference (the
length of the outer circumference of the tire).
* Default value: 2096 m (700x23c)
* Set tire circumference for each sensor.
* You can also change sensor names and cancel pairing from this screen.
Determining tire circumference
Sensor pairing is now complete.
* Pair all sensors that you intend to use.
If you want to pair another sensor, repeat the same procedure again.
Mounting the speed (cadence) sensor (ISC-12)
Setup with smartphone
The speed (cadence) sensor can be mounted either on the top or bottom of the chain stay.
See illustrations
Mounting on top of chain stay
Mounting on bottom of chain stay
* Mounting procedures give instructions for mounting on the top of the chain stay.
1. Temporarily attach the sensor to the left chain stay.
(1) Loosen the sensor screw using a Phillips screwdriver and check that the sensor
arm moves.
Cadence magnet
Wheel
magnet
Speed (cadence)
sensor
Cadence
magnet
Wheel magnet
Speed (cadence) sensor
If the speed (cadence) sensor is mounted on the bottom of the chain stay rather than
on the top, the adjustment range between the sensor and the magnet will be
narrower.
Caution
Watch video
If the speed (cadence) sensor is mounted on the bottom of the chain stay rather than on the
top, the adjustment range between the sensor and the magnet will be narrower.
Caution
(2) Attach the sensor rubber pad to the sensor.
Sensor screw
Sensor arm
Sensor
rubber pad
(3) Refer to the illustration and temporarily attach the sensor to the left chain stay with
nylon ties.
2. Temporarily attach the magnet.
Nylon tie
left chain stay
Cadence
magnet
Inside of the crank
Spoke
Nylon tie
Sensor
zone
Wheel magnet
(1) Using a nylon tie, temporarily attach the cadence magnet to the inside of the left
crank arm so that it faces the cadence sensor zone.
(2) Rotate the sensor arm and temporarily attach the wheel magnet to a spoke facing
Do not fully tighten the nylon ties. Once the nylon ties are fully tightened they cannot
be removed.
Caution
(2) Rotate the sensor arm so that the gap between the wheel magnet and the speed
sensor zone is approximately 3 mm, then tighten the sensor screw securely.
4. Secure all parts.
Tighten the sensor's nylon ties, the sensor screw, and the magnets, and check that
they are not loose.
Trim off the excess nylon tie.
* If using pedals with steel axles, the cadence magnet can be attached magnetically to
the pedal axle. In this case, remove the adhesive tape from the magnet and do not
use the nylon tie.
the speed sensor zone.
* If the sensor cannot is not positioned so that both magnets (speed and cadence)
pass through their respective sensor zones, reposition the sensor and the magnets
so that each magnet passes through its sensor zone.
3. Adjust the gap between the sensor zone and the magnet.
(1) Tilt the sensor so that the gap between the cadence magnet and the cadence
sensor zone is approximately 3 mm, then fasten the sensor securely with nylon ties.
Cadence
magnet
Wheel magnet
Sensor screw
• To eliminate measurement errors, it is recommended to moisten the electrode pads with
water or apply electrolyte cream to the pads.
• If you have sensitive skin, moisten the electrode pads with water and wear it over a thin
shirt.
• Chest hair may interfere with measurement in some cases.
Wearing the heart rate sensor (HR-12)
Setup with smartphone
Watch video
See illustrations
1. Attach the sensor to the HR strap.
Press until you hear a clicking sound.
2. Wear the HR strap by sliding the hook over the other end of the strap.
Wind the HR strap around your body and adjust the length to suit your chest
(underbust). Overtightening the strap may cause discomfort during measurement.
Heart rate sensor
HR strap
Hook
Electrode pads
Back side
Heart rate measurement is performed by wearing a heart rate sensor around the chest.
Before wearing the heart rate sensor
Never use this device if you use a pacemaker.
Warning
* Wear the heart rate sensor so that TOP faces up.
* Ensure that the electrode pads are in close contact with your body.
* If you have dry skin or are wearing the sensor over a shirt, measurement errors may
result. In such cases, moisten the electrode pads with water.
Setup without smartphone
Setup method
 Setup without smartphone
Checking package contents
Setup (first time only)
Mounting the bracket
 Optional accessories
Mounting the speed (cadence) sensor (ISC-12)
Wearing the heart rate sensor (HR-12)
* Mount non-CatEye sensors as directed in relevant instruction manuals.
Setup without smartphone
Checking package contents
Mounting the bracket
Setup
Smart computer unit
Bracket band
Bracket
Bracket rubber pad
Dial
* The Speed + Cadence Kit includes an integrated speed (cadence) sensor (ISC-12) in
addition to the items above.
* The Triple Wireless Kit includes an integrated speed (cadence) sensor (ISC-12) and a heart
rate sensor (HR-12).
Set up smart computer according to the procedure below when using it for the first time.
Button operation
Check button locations before starting set up.
Strada Smart
Back
Padrone Smart
Back
Pull free the smart computer's insulation sheet.
After you pull free the insulation sheet, return the battery cover to its previous location.
* If characters are lit on the LCD screen, you can use the product as is.
  
Insulation
sheet
Padrone Smart
Close
Open
Insulation
sheet
Strada Smart
Press
Slide
Waterproof
inner cap
Checking package contents
Setup
Setup without smartphone
1. Format (initialize) smart computer.
While holding down the MENU button on smart computer, press the AC button.
All data will be deleted and smart computer will be reset to factory default settings.
Caution
Press MENU to proceed to the next step.
3. Pair a sensor.
Smart computer can be used with sensors compatible with Bluetooth 4.0. Pair it with
optional accessories or commercial sensors as required.
The whole display turns on and then switches to the smartphone search screen.
Press MENU to proceed to the next step.
* If smart computer switches to the measurement screen without the whole screen turning
on, it has not been formatted. Redo the procedure.
2. Display the desired measurement unit.
Whole display
turns on
Smartphone search
screen
• Pairing (ID synchronization) must be performed in order to use a sensor.
• Avoid pairing sensors at a race venue or in similar locations where there are many
other users. Doing so may cause smart computer to be paired with another device.
• Pair all sensors that you intend to use.
Important
Activate the sensor that you want to pair.
Activating the sensor
If smart computer is not paired with a sensor capable of measuring speed, tire
circumference entry is skipped.
Important
Ready for
synchronization
Sensor
activated
Synchronization
complete
The synchronized sensor is displayed on the top of the screen and pairing is completed.
• SP : Speed sensor
• ISC : Speed/cadence sensor
• CD : Cadence sensor
• HR : Heart rate sensor
• PW : Power sensor
* When pairing a sensor with a smart computer, a "C" is displayed after the sensor name.
* To pair another sensor, press MODE for 2 seconds to return to the synchronization
standby screen, and repeat the same procedure.
*If pairing is not successful and you cannot proceed to the next step, press MENU to skip
pairing. After setup is complete, retry pairing again from the menu screen.
Press MENU to proceed to the next step.
4. Enter the tire circumference.
Enter the circumference in mm of the tire (the length of the outer circumference of the tire)
on which the sensor is installed.
(Setting range: 0100 – 3999 mm)
Determining tire circumference
(2 seconds)
Increase number
Move to next digit
* Error is displayed if values outside the setting range are entered.
* If multiple sensors capable of speed measurement have been paired, set the tire
circumference for each of the remaining sensors from the menu screen after setup.
Press MENU to proceed to the next step.
Mounting the bracket
5. Set the time display mode and the time.
(2 seconds)
Time display mode
Hours
Minutes
AM/PM
(2 seconds)
Select 24 h Select 12 h
(2 seconds)
Increase number
Increase number
(2 seconds)(2 seconds)
Pressing MENU switches to the measurement screen.
Setup is now complete.
See illustrations
Bracket
band
Bracket
• When mounting on the stem
• When mounting on the handlebar
• Mounting and removing the smart computer unit
!When mounting on the stem
1. Check bracket orientation and attach it to the bracket band.
2. Remove the seal from the bracket rubber pad and stick the bracket
rubber pad onto the bracket band.
Bracket
rubber pad
3. Loop the bracket band around the stem and tighten the dial to secure
it.
Mounting the bracket
Setup
Checking package contents
The bracket can be mounted on either the stem or the handlebar.
Setup without smartphone
Watch video
• Always tighten the dial by hand.
Using a tool or other object to tighten the dial may crush the screw thread.
• Trim bracket band carefully so the cut end will not cause injury (see step 3 above).
Caution
• Always tighten the dial by hand.
Using a tool or other object to tighten the dial may crush the screw thread.
• Trim bracket band carefully so the cut end will not cause injury (see step 3 above).
Caution
!When mounting on the handlebar
1. Check bracket orientation and attach it to the bracket band.
Bracket
band
Bracket
2. Remove the seal from the bracket rubber pad and stick the bracket
rubber pad onto the bracket band.
Bracket
rubber pad
3. Loop the bracket band around the handlebar and tighten the dial to
secure it.
!Mounting and removing the smart computer unit
Cut
Dial
Cut
Dial
To remove smart computer, push out while holding the unit with the other hand to
ensure that it does not fall.
Caution
Removing
Click
While holding smart computer
Push out
Mounting
The speed (cadence) sensor can be mounted either on the top or bottom of the chain stay.
Mounting the speed (cadence) sensor (ISC-12)
Setup without smartphone
See illustrations
Mounting on top of chain stay
Mounting on bottom of chain stay
* Mounting procedures give instructions for mounting on the top of the chain stay.
1. Temporarily attach the sensor to the left chain stay.
(1) Loosen the sensor screw using a Phillips screwdriver and check that the sensor
arm moves.
Cadence magnet
Wheel
magnet
Speed (cadence)
sensor
Cadence
magnet
Wheel magnet
Speed (cadence) sensor
If the speed (cadence) sensor is mounted on the bottom of the chain stay rather than
on the top, the adjustment range between the sensor and the magnet will be
narrower.
Caution
Watch video
If the speed (cadence) sensor is mounted on the bottom of the chain stay rather than on the
top, the adjustment range between the sensor and the magnet will be narrower.
Caution
(2) Attach the sensor rubber pad to the sensor.
Sensor screw
Sensor arm
Sensor
rubber pad
(3) Refer to the illustration and temporarily attach the sensor to the left chain stay with
nylon ties.
2. Temporarily attach the magnet.
Nylon tie
left chain stay
Cadence
magnet
Inside of the crank
Spoke
Nylon tie
Sensor
zone
Wheel magnet
(1) Using a nylon tie, temporarily attach the cadence magnet to the inside of the left
crank arm so that it faces the cadence sensor zone.
(2) Rotate the sensor arm and temporarily attach the wheel magnet to a spoke facing
Do not fully tighten the nylon ties. Once the nylon ties are fully tightened they cannot
be removed.
Caution
(2) Rotate the sensor arm so that the gap between the wheel magnet and the speed
sensor zone is approximately 3 mm, then tighten the sensor screw securely.
4. Secure all parts.
Tighten the sensor's nylon ties, the sensor screw, and the magnets, and check that
they are not loose.
Trim off the excess nylon tie.
* If using pedals with steel axles, the cadence magnet can be attached magnetically to
the pedal axle. In this case, remove the adhesive tape from the magnet and do not
use the nylon tie.
the speed sensor zone.
* If the sensor cannot is not positioned so that both magnets (speed and cadence)
pass through their respective sensor zones, reposition the sensor and the magnets
so that each magnet passes through its sensor zone.
3. Adjust the gap between the sensor zone and the magnet.
(1) Tilt the sensor so that the gap between the cadence magnet and the cadence
sensor zone is approximately 3 mm, then fasten the sensor securely with nylon ties.
Cadence
magnet
Wheel magnet
Sensor screw
Setup without smartphone
Watch video
See illustrations
1. Attach the sensor to the HR strap.
Press until you hear a clicking sound.
2. Wear the HR strap by sliding the hook over the other end of the strap.
Wind the HR strap around your body and adjust the length to suit your chest
(underbust). Overtightening the strap may cause discomfort during measurement.
Heart rate sensor
HR strap
Hook
Electrode pads
Back side
Wearing the heart rate sensor (HR-12)
• To eliminate measurement errors, it is recommended to moisten the electrode pads with
water or apply electrolyte cream to the pads.
• If you have sensitive skin, moisten the electrode pads with water and wear it over a thin
shirt.
• Chest hair may interfere with measurement in some cases.
Heart rate measurement is performed by wearing a heart rate sensor around the chest.
Before wearing the heart rate sensor
Never use this device if you use a pacemaker.
Warning
* Wear the heart rate sensor so that TOP faces up.
* Ensure that the electrode pads are in close contact with your body.
* If you have dry skin or are wearing the sensor over a shirt, measurement errors may
result. In such cases, moisten the electrode pads with water.
What is Mirror Mode?
Mirror Mode refers to syncing smart computer with Cateye's smartphone app, Cateye
Cyling™. By using smart computer with Cateye Cycling™, you can connect smart
computer and optional/commercial sensors (speed, cadence, heart rate, and power)
with your smartphone, and record log information including your smartphone's GPS
function while you measure. In this case smart computer becomes a monitor that
displays smartphone measurement data in real time.
By mounting a smart computer on your handlebars, in addition to being able to operate
the Cateye Cycling™ smartphone app when your smartphone is in your bag or pocket,
you can also view measurement data and check if you have received any phone calls
or emails.
This feature reduces smartphone battery consumption and avoids the danger of
dropping your smartphone.
It is possible to upload measurement results (trip data) immediately to a service site
such as Cateye Atlas™.
* Even if you do not have a sensor capable of speed measurement, you can use smart
computer as a "sensorless" cyclocomputer using your smartphone's GPS function.
!About screen displays
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of
such marks by CATEYE Co., Ltd. is under license. Other trademarks and trade names are
those of their respective owners.
Smartphone and smart computer
You can use smart computer in mirror mode or sensor direct mode depending on your
preferences or the situation.
Smart computer screen
Cateye Cycling™ screen
Start measurement
Connecting smartphone and smart computer
Measurement
Saving and uploading trips
Viewing Data
Checking activity totals
Checking activities
Uploading all activities
With Cateye Cycling™, you can check and manage trip and summary data (called
"activities").
Changing settings
Cateye Cycling™ can be used to configure all settings for smart computer and connected
devices.
General
Device
Account
When a smartphone is connected, if Cateye Cylcling™ and smart computer settings
differ, you must choose which settings to sync.
Important
Details displayed:
Data displayed at top of screen
Displays current speed.
In Mirror Mode, when a phone call is received, the number at the far right rotates.
* Can be changed to display heart rate or cadence.
Device : Smart computer : Customize screen
Current function
Measured values change every time MODE is pressed.
• Speed/cadence/heart rate flash:
If using a CATEYE sensor, the values related to the sensor's battery replacement period
start flashing to indicate that it is time to replace the battery.
Battery replacement : Optional sensors
• Power values flash:
When using separate left and right power sensors, power values flash on and off to
indicate that only signals from one sensor are being received.
Dot section (MODE button)
When the computer is mounted on the bracket, pressing the dot section depresses the
MODE button.
Incoming call/email indicator
When an incoming call/e-mail is received, an icon is displayed on the screen and the dot
section flashes regularly, so you can check it in the dark.
Smart computer screen
Smartphone and smart computer
Strada SmartPadrone Smart
Explanation of icons:
(Battery alarm)
Flashes when smart computer's remaining battery power is low.
When this icon flashes, replace batteries as soon as possible.
Battery replacement : Smart computer
(Memory alarm)
Turns on when smart computer's remaining memory is low.
After the icon turns on, the oldest summary data is deleted to create space to record new
data.
* Memory is used to record summary data in Sensor Direct Mode.
* Memory can be cleared by importing summary data into Cateye Cycling™.
Importing summary data
(Pace arrows)
Indicate whether the current speed is faster (
) or slower ( ) than the average speed.
(Sensor signal icon)
Indicates the Bluetooth® sensor's signal reception status.
• Types of icons:
S (Speed signal)
Indicates the speed sensor signal.
C (Cadence signal)
Indicates the cadence sensor signal.
S / C (S and C displayed simultaneously)
Indicates the speed (cadence) sensor (ISC) signal.
H (Heart rate signal)
Indicates the heart rate sensor signal.
P (Power signal)
Indicates the power sensor signal.
• Icon states:
On
Receiving signal in Mirror Mode
Flashing
Receiving signal in Sensor Direct Mode
Off
No signal
(Tire size)
Appears when setting tire circumference.
(Synchro)
Turns on when a smartphone is connected.
Flashes when the smartphone's remaining battery power is low.
・ (Email / SMS received) / (Incoming call received)
In Mirror Mode, email, SMS, and incoming call notification is provided by an icon.
Notifications are reset when measurement is paused, reset, or finished.
* SMS received notification feature is only available on Padrone Smart.
* It is necessary to configure email account settings to receive incoming email.
General : Notification Settings
Measurement : Pausing / reset operation
• • • (Measurement unit)
Displays the currently selected measurement unit.
• On
Measurement stopped
• Flashing
Measurement in progress
(Average)
Indicates that the currently displayed value is an average value.
(Maximum)
Indicates that the currently displayed value is a maximum value.
Current function
Indicates the currently displayed function.
•
(Total Distance)
•
(Elapsed Time)
•
(Heart Rate)
•
(Altitude)
* Only in Mirror Mode
•
(Trip Distance)
•
(Trip Distance 2)
•
(Current Speed)
•
(Cadence)
•
(Power)
•
(Clock)
This is the Cateye Cycling™ home screen.
From this screen you can start, pause, and finish measurement.
* Starting, pausing, and finishing measurement can be done remotely from the smart
computer unit.
* Measurement data is displayed as – if sensor signal cannot be received.
Cateye Cycling™ [Trip] screen
Smartphone and smart computer
Menu button
Displays the menu.
Device connection status icon
Displays connection status with other devices.
•
(Smart computer)
•
(Heart rate sensor)
•
(Speed sensor)
•
(Cadence sensor)
•
(Power sensor)
* A grayed-out icon indicates an unconnected sensor.
*Speed (cadence) sensors (ISC) display both
and .
/
Number of temporarily saved trips
Displays the number of temporarily saved trips.
GPS icon
Indicates GPS signal reception status.
Calibration button
Performs power sensor calibration.
Power sensor calibration
Switch display mode
Swiping the screen switches to map display/graph display, letting you check where you
have been.
Start measurement button
Starts measurement.
* Not available if speed signal or GPS signal cannot be received.
Pause button
Pauses measurement.
Flag button
Finishes measurement.
Switches to the trip upload screen.
Saving and uploading trips
Map display Graph display
The maximum number of trips that can be saved temporarily is 30. If this number is
exceeded, the icon changes to
and it is not possible to temporarily save any
more trips. It is recommended that trip data is saved and uploaded regularly.
Important
1. Launch Cateye Cycling™, and from (MENU) turn on [Connect].
2. On the measurement screen, press MODE for 1 second to display the
smartphone search screen and connect with your smartphone.
When smart computer connects to a smartphone, it switches to the measurement standby
display.
* If the connection is made when Cateye Cycling™ is already measuring, [PAUSE] and
measured values are displayed.
* The appearance of the smart computer screen depends on the state of Cateye
Cycling™.
Smartphone connection is now complete.
Smartphone search
screen
Measurement
standby
Connecting smartphone and smart computer
Smartphone and smart computer
Smartphone
Smart computer
Measurement
Saving and uploading trips
Connecting smart computer and smartphone
Measurement
Smartphone and smart computer
• Smartphone use
When measuring, turn the smartphone display off, and with Cateye Cycling™ running,
store the smartphone in a safe place such as a bag or pocket.
As measurement start/pause/resume and reset operations (finish trip) can be performed
remotely from smart computer, there is no need to take out your smartphone until you
want to save or upload trips.
* Cateye Cycling™ can measure even when running in the background.
• Restrictions on measurement
In Mirror Mode, the maximum elapsed time that can be measured is approximately 27
hours and maximum trip distance is 1000 km [620 mile]. When either of these values is
exceeded, measurement finishes and trip data is saved temporarily.
In this case, the display returns to the [ready] (measurement standby) screen ready to
start the next trip measurement.
Important
 Pausing/resuming measurement
Smart computer
Pressing MODE for 1 second displays [PAUSE] and pauses measurement.
Pressing MODE again for 1 second resumes measurement.
During
measurement
Paused
 Starting measurement
Smart computer
* If the connection with the smartphone is interrupted during measurement, smart
computer switches to the smartphone search screen. When the connection is
reestablished, Smart computer returns to the measurement screen.
When smart computer is on the [ready] (measurement standby) screen, pressing MODE
for 1 second starts measurement.
(1 second)
Measurement
starts
Measurement
standby
(1 second)
Trip distance
Alternate
display
!Functions during measurement
Switching measurement data display
Smart computer
You can switch the display of data being measured in Cateye Cycling™ by pressing
MODE.
* The data displayed changes depending on the state of the sensor connection.
 Finishing measurement (reset operation)
Smart computer
Pressing MODE for 3 seconds finishes measurement. Trip data is saved temporarily on
the smartphone and measurement values are reset.
The screen changes to the [ready] display, ready to start the next measurement.
Paused Measurement
standby
(3 seconds)
Reset/
finish trip
Saving and uploading trips
Power-saving mode
Auto pause function
Smart computer
This function automatically pauses measurement when the connection between the
smartphone and smart computer is broken.
Measurement resumes automatically when the connection is reestablished.
General : Auto pause
* Heart rate and cadence data will not be displayed unless each sensor is paired.
If you have power sensors
* When the power value exceeds 999, the last three digits are displayed.
When a signal is received from a paired power sensor, power is displayed as one of the
current functions.
Smart computer
Smartphone
Power
Power
Smart computer
When smart computer is left on the [ready] (measurement standby) screen, [PAUSE]
screen, or smartphone search screen for approximately 20 minutes; Cateye Cycling™ is
closed; or [Connect] is turned off, the sleep display is activated.
When MODE is pressed, smart computer returns to the smartphone search screen and
then returns to the measurement screen when the connection with the smartphone is
reestablished.
Measurement
standby
Paused
Smartphone search
screen
Sleep
When left for
approx. 20
minutes
Saving and uploading trips
* To increase precision, it is recommended to perform calibration before power
measurement.
Power sensor calibration
Connecting smart computer and smartphone
Measurement
1. On the Trip screen, tap (flag) to finish measurement.
The app switches to the upload screen.
2. Turn on an upload destination.
* Trip names can be edited.
* You must have an account with the relevant site to upload data.
Account
* Cateye Cycling™ only allows you to post links of trips uploaded to CATEYE Atlas™ on
Facebook™ and Twitter™. Links to other service sites cannot be posted.
3. Tap (Save & Upload). Trips are saved in Cateye Cycling™ and
uploaded to the selected service sites.
* Repeat this action if there are multiple trips.
* Tap
(Delete) to delete a trip.
* When not performing measurement, it is recommended that you turn off [Connect] from
(MENU) to minimize smartphone battery drain.
Checking activities
Saving and uploading trips
Smartphone and smart computer
Smartphone
Checking activity totals
Smartphone and smart computer
Smartphone
1. Tap (MENU) and then [All Activity Summary].
* It is possible to check total values for all activities saved with Cateye Cycling™ and
maximum values for individual trips.
Checking activities
Uploading all activities
Checking activity totals
• (Upload) :
Upload to service sites
•
(Delete) :
Delete activity
Checking activities
Smartphone and smart computer
Uploading all activities
Smartphone
1. Tap (MENU) and then [Activity List].
You can check activities (the collective term for trip data and summary data) from the Activity
List.
* The Activity List can be displayed in graph, list, or calendar format.
* Tapping
(Select to Delete) moves to the activity deletion screen.
Select the activities you want to delete and tap
(Delete).
2. Tap each activity to check details or upload/delete it.
Checking activities
Checking activity totals
Uploading all activities
Smartphone and smart computer
Smartphone
1. Tap (MENU) and then [Upload].
* Activities already uploaded to service sites are not displayed.
2. Select the activities you want to upload and tap (Upload) to upload
them to the specified sites.
* You must have an account with the relevant site to upload data.
* The upload destinations for Upload All are the ones turned on in [Account] settings.
Account
All activities can be uploaded to service sites in one action.
• Recording Interval
Selects the interval at which the log is recorded.
• Notification Settings
Configures settings for incoming call notification (phone/email/SMS) and smartphone
remaining battery notification.
* SMS received notification feature is only available on Padrone Smart.
* On iPhones, incoming SMS notifications cannot be turned off through the
notification settings in Cateye Cycling™.
• Units
Selects the measurement unit.
General
Smartphone and smart computer
Smartphone
1. Tap (MENU) and then [General].
Adjust various settings related to Mirror Mode.
When the unit is changed when smart computer is not connected to your smartphone,
you will be prompted to select a unit the next time you connect.
Important
• Auto Pause
This function automatically pauses measurement when the connection between smart
computer and your smartphone is interrupted if you move away from the bicycle with
your smartphone during measurement.
Device
Account
General
Device
Smartphone and smart computer
Configure settings for connected devices (Smart computer and sensors).
• Device settings are shared when smart computer is connected to your smartphone.
If settings differ, you will be prompted to select which settings to sync.
• When using an iPhone, you cannot sync settings of commercial sensors.
When measuring in Sensor Direct Mode, it is necessary to configure sensor settings
separately via smart computer.
Important
Smartphone
1. Tap (MENU) and then [Device].
SMART COMPUTER
• Display Customization
Lets you set data displayed on the top and bottom of the screen.
• Odometer
Lets you manually set total distance traveled.
* Use this function when you want to continue from the same distance after purchasing a
These settings can only be configured when your smartphone is connected to smart
computer.
Important
Account
SENSOR
Tire circumference
Enter the tire circumference for a sensor capable of speed measurement.
Determining tire circumference
These settings can be configured even when your smartphone is not connected to smart
computer.
If settings differ between devices, the next time you connect you will be prompted to
select which settings to apply.
Important
new smart computer or when resetting smart computer.
• Clock
Lets you switch between 12-hour and 24-hour time display.
Device
Adjust settings for the service sites below.
* You must have an account with the relevant site to upload data.
Service sites
・ CATEYE Atlas™
・ STRAVA™
・ TRAINING PEAKS™
SNS
・ Facebook™
・ Twitter™
* When using an SNS, links to activities uploaded to Cateye Atlas™ are posted.
General
Account
Smartphone and smart computer
Set which service sites and social networking services (SNSs) activities are uploaded to.
1. Tap (MENU) and then [Account].
Start measurement
Switching to Sensor Direct Mode
Starting/stopping measurement
What is Sensor Direct Mode?
Smart computer screen
Sensor Direct Mode refers to using smart computer as a regular cyclocomputer without
your smartphone.
In this case, Smart computer measures by receiving signals directly from each sensor
(speed, cadence, heart rate, and power).
Measurement results such as elapsed time and trip distance (summary data) can be
forwarded to a smartphone via Cateye Cycling™ and uploaded to a service site such
as CATEYE Atlas™.
* Trip logs cannot be recorded in Sensor Direct Mode.
* When using an iPhone, you cannot sync settings of commercial sensors.
When measuring in Sensor Direct Mode, it is necessary to configure sensor settings
separately via smart computer.
!About screen displays
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of
such marks by CATEYE Co., Ltd. is under license. Other trademarks and trade names are
those of their respective owners.
Smartphone and smart computer
You can use smart computer in mirror mode or sensor direct mode depending on your
preferences or the situation.
Viewing Data
With Cateye Cycling™, you can check and manage trip and summary data (called
"activities").
Checking activity totals
Checking activities
Uploading all activities
Importing summary data measured
in Sensor Direct Mode
Changing settings
General
Device
Account
Cateye Cycling™ can be used to configure all settings for smart computer and connected
devices.
* When a smartphone is connected, if Cateye Cylcling™ and smart computer settings
differ, you must choose which settings to sync.
• When a smartphone is connected, if Cateye Cylcling™ and smart computer settings
differ, you must choose which settings to sync.
• When using an iPhone, you cannot sync settings of commercial sensors.
When measuring in Sensor Direct Mode, it is necessary to configure sensor settings
separately via smart computer.
Pairing (Sensor ID synchronization)
Tire circumference setting
Important
Details displayed:
Data displayed at top of screen
Displays current speed.
* Can be changed to display heart rate or cadence.
Device : Smart computer : Display Customization
Current function
Measured values change every time MODE is pressed.
* If the values flash on and off, it is time to replace the sensor battery.
• Speed/cadence/heart rate flash:
If using a CATEYE sensor, the values related to the sensor's battery replacement period
start flashing to indicate that it is time to replace the battery.
Battery replacement : Optional sensors
• Power values flash:
When using separate left and right power sensors, power values flash on and off to
indicate that only signals from one sensor are being received.
Dot section (MODE button)
When the computer is mounted on the bracket, pressing the dot section depresses the
MODE button.
Explanation of icons:
Smart computer screen
Smartphone and smart computer
Strada SmartPadrone Smart
(Battery alarm)
Flashes when smart computer's remaining battery power is low.
When this icon flashes, replace batteries as soon as possible.
Battery replacement : Smart computer
(Memory alarm)
Turns on when smart computer's remaining memory is low.
After the icon turns on, the oldest summary data is deleted to create space to record new
data.
* Memory is used to record summary data in Sensor Direct Mode.
* Memory can be cleared by importing summary data into Cateye Cycling™.
Importing summary data
(Pace arrows)
Indicate whether the current speed is faster (
) or slower ( ) than the average speed.
(Sensor signal icon)
Indicates the Bluetooth® sensor's signal reception status.
• Types of icons:
S (Speed signal)
Indicates the speed sensor signal.
C (Cadence signal)
Indicates the cadence sensor signal.
S / C (S and C displayed simultaneously)
Indicates the speed (cadence) sensor (ISC) signal.
H (Heart rate signal)
Indicates the heart rate sensor signal.
P (Power signal)
Indicates the power sensor signal.
• Icon states:
Flashing
Signal being received
Off
No signal
(Tire size)
Appears when setting tire circumference.
• • • (Measurement unit)
Displays the currently selected measurement unit.
• On
Measurement stopped
• Flashing
Measurement in progress
(Average)
Indicates that the currently displayed value is an average value.
(Maximum)
Indicates that the currently displayed value is a maximum value.
Current function
Indicates the currently displayed function.
•
(Total Distance)
• (Elapsed Time)
•
(Heart Rate)
•
(Trip Distance)
•
(Trip Distance 2)
•
(Current Speed)
•
(Cadence)
•
(Power)
•
(Clock)
Switching to Sensor Direct Mode
Smartphone and smart computer
Starting/stopping measurement
Smartphone
Smart computer
1. Close Cateye Cycling™ or from (MENU), check that [Connect] is
turned off.
2. From the smartphone search screen, press MODE for 1 second to switch
to Sensor Direct Mode.
Measurement screen
(Sensor Direct Mode)
Smartphone search
screen
(1 second)
* Smart computer will search for a sensor instead of your smartphone. In this mode, the
sensor icon flashes to indicate sensor reception status.
• S (Flash): When the speed signal is received
• C (Flash): When the cadence signal is received
• S/C (S and C flash simultaneously): When the speed/cadence (ISC) sensor
signal is received
• H (Flash): When the heart rate signal is received
• P (Flash): When the power signal is received
Sensor Direct Mode and Mirror Mode measure independently and data has no continuity.
Important
Switching to Sensor Direct Mode
Starting/stopping measurement
Smartphone and smart computer
 Starting/stopping measurement
Smart computer
* The pause function is not available in Sensor Direct Mode.
Measurement starts automatically when the bicycle moves.
During measurement the measurement unit flashes.
 Saving measurement data (reset operation)
Smart computer
Pressing and holding MODE when on the measurement screen generates
measurement data as summary results and resets measurement data to 0.
* When MODE has been pressed for 1 second, a smartphone search screen
appears, but you should continue to hold down the button.
* The summary data generated is loaded into the smartphone.
Importing summary data
Reset
(3 seconds)
The maximum number of trips that smart computer can save temporarily is 30. If this
number is exceeded, the
icon appears on the screen, and the oldest summary data is
deleted when smart computer is reset.
When using smart computer with a smartphone, it is recommended to import data
regularly.
Important
!Resetting Trip Distance 2 (Dst2)
If Trip Distance 2 (Dst2) is displayed and MODE is pressed for 3 seconds, only Trip
Distance 2 is reset to 0.
* Trip Distance 2 (Dst2) values are not recorded in summary data.
* Total Distance (Odo) cannot be reset.
!Functions during measurement
Switching measurement data display
Smart computer
Pressing MODE switches the measurement data displayed at the bottom of the screen.
* The data displayed changes depending on the state of the sensor connection.
If you have power sensors
When a signal is received from a paired power sensor, power is displayed as one of the
current functions.
Smart computer
Power
Power-saving mode
Smart computer
If there is no sensor signal nor button operation for 10 minutes, the power-saving screen is
activated. If such a state continues for a further hour, the sleep display is activated.
The power-saving screen returns to the measurement screen when the bicycle starts
moving.
When left
for approx.
10 min
When left for
approx. 60 min
Power-saving screenMeasurement
screen
Sleep
* Heart rate and cadence data will not be displayed unless each sensor is paired.
*Average values are displayed as .E instead of the measurement value when Elapsed
Time exceeds approximately 27 hours. Average speed is also displayed as .E instead of
the measurement value when Trip Distance exceeds 1,000 km [620 mile].
Reset smart computer and start measurement again to enable average value
measurement.
Reset operation
* When the power value exceeds 999, the last three digits are displayed.
* To increase precision, it is recommended to perform calibration before power
measurement.
Power sensor calibration
Smartphone and smart computer
Checking activity totals
Smartphone
1. Tap (MENU) and then [All Activity Summary].
* It is possible to check total values for all activities saved with Cateye Cycling™ and
maximum values for individual trips.
Checking activities
Uploading all activities
Importing summary data measured
in Sensor Direct Mode
Smartphone and smart computer
Checking activity totals
• (Upload):
Upload to service sites
•
(Delete):
Delete activity
Checking activities
Uploading all activities
Importing summary data measured
Smartphone
1. Tap (MENU) and then [Activity List].
You can check activities (the collective term for trip data and summary data) from the Activity
List.
* The Activity List can be displayed in graph, list, or calendar format.
* Tapping
(Select to Delete) moves to the activity deletion screen.
Select the activities you want to delete and tap
(Delete).
2. Tap each activity to check details or upload/delete it.
in Sensor Direct Mode
Smartphone and smart computer
Checking activities
Checking activity totals
Uploading all activities
Importing summary data measured
in Sensor Direct Mode
Smartphone
1. Tap (MENU) and then [Upload].
* Activities already uploaded to service sites are not displayed.
2. Select the activities you want to upload and tap (Upload) to upload
them to the specified sites.
* You must have an account with the relevant site to upload data.
* The upload destinations for Upload All are the ones turned on in [Account] settings.
Account
All activities can be uploaded to service sites in one action.
Smartphone and smart computer
Checking activities
Uploading all activities
Checking activity totals
Importing summary data
Smartphone
Smart computer
1. Launch Cateye Cycling™, and from (MENU) turn on [Connect].
2. On the measurement screen, press MODE for 1 second to display the
smartphone search screen and connect with your smartphone.
When smart computer connects to a smartphone, it switches to the measurement standby
display.
Smartphone search
screen
Measurement
standby
* The appearance of the smart computer screen depends on the state of Cateye
Cycling™.
Before importing summary data, always finish smart computer measurement (reset
operation).
You cannot import data for which measurement has not finished.
Reset operation
Important
You can send summary data accumulated in smart computer (measurement results of sensor
direct mode) to your smartphone.
Smartphone
3. Tap (MENU) and then [Activity List].
* It is not possible to import data while measuring with Cateye Cycling™.
If there is summary data in smart computer, the
(Import from CC) is displayed.
Tapping the button imports summary data to your smartphone and updates the activity list.
* This action deletes summary data from smart computer.
* After importing summary data, it is recommended that you turn off [Connect] from
(MENU) to minimize smartphone battery drain.
General
Smartphone and smart computer
• Recording Interval
Selects the interval at which the log is recorded.
• Notification Settings
Configures settings for incoming call notification (phone/email/SMS) and smartphone
remaining battery notification.
* SMS received notification feature is only available on Padrone Smart.
* On iPhones, incoming SMS notifications cannot be turned off through the
notification settings in Cateye Cycling™.
• Units
Selects the measurement unit.
Smartphone
1. Tap (MENU) and then [General].
Adjust various settings related to Mirror Mode.
When the unit is changed when smart computer is not connected to your smartphone,
you will be prompted to select a unit the next time you connect.
Important
・ Auto Pause
This function automatically pauses measurement when the connection between smart
computer and your smartphone is interrupted if you move away from the bicycle with
your smartphone during measurement.
Device
Account
Smartphone and smart computer
General
Device
Configure settings for connected devices (Smart computer and sensors).
Smartphone
1. Tap (MENU) and then [Device].
• Device settings are shared when smart computer is connected to your smartphone.
If settings differ, you will be prompted to select which settings to sync.
• When using an iPhone, you cannot sync settings of commercial sensors.
When measuring in Sensor Direct Mode, it is necessary to configure sensor settings
separately via smart computer.
Important
SMART COMPUTER
• Display Customization
Lets you set data displayed on the top and bottom of the screen.
• Odometer
These settings can only be configured when your smartphone is connected to smart
computer.
Important
Account
SENSOR
Tire circumference
Enter the tire circumference for a sensor capable of speed measurement.
Determining tire circumference
These settings can be configured even when your smartphone is not connected to smart
computer.
If settings differ between devices, the next time you connect you will be prompted to
select which settings to apply.
Important
Lets you manually set total distance traveled.
* Use this function when you want to continue from the same distance after purchasing a
new smart computer or when resetting smart computer.
• Clock
Lets you switch between 12-hour and 24-hour time display.
Smartphone and smart computer
Device
General
Adjust settings for the service sites below.
* You must have an account with the relevant site to upload data.
Service sites
・ CATEYE Atlas™
・ STRAVA™
・ TRAINING PEAKS™
SNS
・ Facebook™
・ Twitter™
* When using an SNS, links to activities uploaded to Cateye Atlas™ are posted.
Account
Set which service sites and social networking services (SNSs) activities are uploaded to.
1. Tap (MENU) and then [Account].
Pairing (Sensor ID synchronization)
Smartphone and smart computer
Pair a sensor that you want to use with smart computer.
• Pairing (sensor ID synchronization) must be performed in order to use a sensor.
• Do not pair sensors at a race venue or in similar locations where there are many other
users. Doing so may cause smart computer to be paired with another sensor.
• Pair all sensors that you intend to use.
Important
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, smart computer returns to the
measurement screen.
2. Press MODE to display the screen shown below, and then press MODE
for 2 seconds.
3. Activate the sensor that you want to pair.
Activating the sensor
The synchronized sensor is displayed on the top of the screen and pairing is completed.
Measurement
screen
Menu screen
(Clock setting)
(2 seconds)
Ready for
synchronization
Sensor
activated
Synchronization
complete
When smart computer displays [FULL] on the screen and returns to the menu:
Important
Tire circumference setting
* Pairing standby time is 5 minutes. Activate the sensor within this time.
4. Press MENU to confirm pairing.
If you want to continue pairing another sensor, repeat the same operations again.
Pressing MENU again returns to the measurement screen.
* If you have changed settings, always press MENU to confirm changes.
Up to 9 separate sensor IDs can be paired with smart computer. If the maximum number
of sensors have been paired, with the computer in pairing standby state, press MENU
for 4 seconds to clear all pairings.
Pairing (Sensor ID synchronization)
Tire circumference setting
Smartphone and smart computer
Set the tire circumference for a sensor capable of speed measurement.
• Pairing (sensor ID synchronization) must be performed first.
Pairing (Sensor ID synchronization)
• Set tire circumference for each sensor. The default value is 2,096 mm (700x23c).
Important
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, smart computer returns to the
measurement screen.
2. Press MODE to display (tire icon) and then press MODE for 2
seconds.
3. Select the sensor you want to set, and enter the tire circumference.
Enter the circumference in mm of the tire (the length of the outer circumference of the tire)
on which the sensor is installed.
(Setting range: 0100 – 3999 mm)
Determining tire circumference
Measurement
screen
Menu screen
(Clock setting)
(2 seconds)
* Only paired sensors can be selected.
* Error is displayed if values outside the setting range are entered.
4. Press MENU to confirm settings.
Pressing MENU again returns to the measurement screen.
* If you have changed settings, always press MENU to confirm changes.
Sensor selection
(2 seconds)(2 seconds)
(2 seconds)
Increase numbers
Tire circumference value
Move to next digit
Smart computer
Start measurement
Starting/stopping measurement
Changing settings
Clock setting
Tire circumference setting
Pairing (Sensor ID synchronization)
Display settings for top of screen
Function setting
Total distance manual input
Measurement unit setting
Change various smart computer settings.
Outline
!
About screen displays
Smart computer screen
You can use smart computer as a regular cyclocomputer.
This is referred to as "Sensor Direct Mode". In Sensor Direct Mode, smart computer
measures by receiving signals from each sensor (speed, cadence, heart rate, and power).
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of
such marks by CATEYE Co., Ltd. is under license. Other trademarks and trade names are
those of their respective owners.
Smart computer
Details displayed:
Data displayed at top of screen
Displays current speed.
* Can be changed to display heart rate or cadence.
Display settings for top of screen
Current function
Measured values change every time MODE is pressed.
* If the values flash on and off, it is time to replace the sensor battery.
• Speed/cadence/heart rate flash:
If using a CATEYE sensor, the values related to the sensor's battery replacement period
start flashing to indicate that it is time to replace the battery.
Battery replacement : Optional sensors
• Power values flash:
When using separate left and right power sensors, power values flash on and off to
indicate that only signals from one sensor are being received.
Dot section (MODE button)
When the computer is mounted on the bracket, pressing the dot section depresses the
MODE button.
Explanation of icons:
(Battery alarm)
Smart computer screen
Strada SmartPadrone Smart
Flashes when smart computer's remaining battery power is low.
When this icon flashes, replace batteries as soon as possible.
Battery replacement : Smart computer
(Memory alarm)
This information is required when syncing with a smartphone. Measurement is not affected if
this icon turns on.
(Pace arrows)
Indicate whether the current speed is faster (
) or slower ( ) than the average speed.
(Sensor signal icon)
Indicates the Bluetooth® sensor's signal reception status.
• Types of icons:
S (Speed signal)
Indicates the speed sensor signal.
C (Cadence signal)
Indicates the cadence sensor signal.
S / C (S and C displayed simultaneously)
Indicates the speed (cadence) sensor (ISC) signal.
H (Heart rate signal)
Indicates the heart rate sensor signal.
P (Power signal)
Indicates the power sensor signal.
• Icon states:
Flashing
Signal being received
Off
No signal
(Tire size)
Displays the tire circumference during setup.
• • • (Measurement unit)
Displays the currently selected measurement unit.
• On
Measurement stopped
• Flashing
Measurement in progress
(Average)
Indicates that the currently displayed value is an average value.
(Maximum)
Indicates that the currently displayed value is a maximum value.
Current function
Indicates the currently displayed function.
•
(Total Distance)
•
(Elapsed Time)
•
(Heart Rate)
•
(Trip Distance)
•
(Trip Distance 2)
• (Current Speed)
•
(Cadence)
•
(Power)
•
(Clock)
Starting/stopping measurement
Smart computer
 Starting/stopping measurement
Measurement starts automatically when the bicycle moves.
During measurement the measurement unit flashes.
 Reset operation
Pressing and holding MODE when on the measurement screen resets
measurement data to 0.
* When MODE has been pressed for 1 second, a smartphone search screen
appears, but you should continue to hold down the button.
If smart computer stops on this screen, press MODE again for 1 second to
return to the measurement screen.
Reset
(3 seconds)
!Resetting Trip Distance 2 (Dst2):
If Trip Distance 2 (Dst2) is displayed and MODE is pressed for 3 seconds, only Trip
Distance 2 is reset to 0.
*Total Distance (Odo) cannot be reset.
 Switching measurement data display
Pressing MODE switches the measurement data displayed at the bottom of the screen.
* The data displayed changes depending on the state of the sensor connection.
* Heart rate and cadence data will not be displayed unless each sensor is paired.
*Average values are displayed as .E instead of the measurement value when Elapsed
Time exceeds approximately 27 hours. Average speed is also displayed as .E instead of
the measurement value when Trip Distance exceeds 1,000 km [620 mile].
Reset smart computer and start measurement again to enable average value
measurement.
 Power-saving mode
If there is no sensor signal or button operation for 10 minutes, the power-saving screen is
activated. If such a state continues for a further hour, the sleep display is activated.
The power-saving screen returns to the measurement screen when the bicycle starts
moving.
When left
for approx.
10 min
When left for
approx. 60 min
Power-saving screen
Measurement
screen
Sleep
 If you have power sensors
* When the power value exceeds 999, the last three digits are displayed.
* It is recommended that the sensor is periodically calibrated before power measurement.
Power sensor calibration
Power
When a signal is received from a paired power sensor, power is displayed as one of the
current functions.
Reset operation
Clock setting
Smart computer
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, smart computer returns to the
measurement screen.
2. Check that (clock icon) is flashing, and press MODE for 2 seconds.
3. Set the time display mode and the time.
Measurement
screen
Menu screen
(Clock setting)
(2 seconds)
4. Press MENU to confirm settings.
Pressing MENU again returns to the measurement screen.
* If you have changed settings, always press MENU to confirm changes.
Pairing (Sensor ID synchronization)
Tire circumference setting
Total distance manual input
Switch top of screen display
Function setting
(2 seconds)
Time display mode
Hours
Minutes
AM/PM
(2 seconds)
Select 24 h Select 12 h
(2 seconds)
Increase number
Increase number
(2 seconds)(2 seconds)
Measurement unit setting
Clock setting
Tire circumference setting
Smart computer
Set the tire circumference for a sensor capable of speed measurement.
• Pairing (sensor ID synchronization) must be performed first.
Pairing (Sensor ID synchronization)
• Set tire circumference for each sensor. The default value is 2,096 mm (700x23c).
Important
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, smart computer returns to the
measurement screen.
2. Press MODE to display (tire icon) and then press MODE for 2
seconds.
3. Select the sensor you want to set, and enter the tire circumference.
Enter the circumference in mm of the tire (the length of the outer circumference of the tire)
on which the sensor is installed.
(Setting range: 0100 – 3999 mm)
Determining tire circumference
Measurement
screen
Menu screen
(Clock setting)
(2 seconds)
Pairing (Sensor ID synchronization)
Total distance manual input
Switch top of screen display
Measurement unit setting
Function setting
* Sensors that can be selected are those that have been paired with Cateye Cycling™ or
a smart computer. The letter that appears after the sensor name indicates how the
sensor was paired.
• A : Sensor paired with Cateye Cycling™
• C : Sensor paired with a smart computer
* Error is displayed if values outside the setting range are entered.
4. Press MENU to confirm settings.
Pressing MENU again returns to the measurement screen.
* If you have changed settings, always press MENU to confirm changes.
Sensor selection
(2 seconds)(2 seconds)
(2 seconds)
Increase numbers
Tire circumference value
Move to next digit
Clock setting
Tire circumference setting
Pairing (Sensor ID synchronization)
Smart computer
Pair a sensor that you want to use with smart computer.
• Pairing (sensor ID synchronization) must be performed in order to use a sensor.
• Do not pair sensors at a race venue or in similar locations where there are many other
users. Doing so may cause smart computer to be paired with another sensor.
• Pair all sensors that you intend to use.
Important
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, smart computer returns to the
measurement screen.
2. Press MODE to display the screen shown below, and then press MODE
for 2 seconds.
3. Activate the sensor that you want to pair.
Activating the sensor
Measurement
screen
Menu screen
(Clock setting)
(2 seconds)
Ready for
synchronization
Sensor
activated
Synchronization
complete
Total distance manual input
Switch top of screen display
Measurement unit setting
Function setting
The synchronized sensor is displayed on the top of the screen and pairing is completed.
• SP : Speed sensor
• ISC : Speed/cadence sensor
• CD : Cadence sensor
• HR : Heart rate sensor
• PW : Power sensor
* When pairing a sensor with a smart computer, a "C" is displayed after the sensor name.
* Pairing standby time is 5 minutes. Activate the sensor within this time.
4. Press MENU to confirm pairing.
If you want to continue pairing another sensor, repeat the same operations again.
Pressing MENU again returns to the measurement screen.
* If you have changed settings, always press MENU to confirm changes.
When smart computer displays [FULL] on the screen and returns to the menu:
Up to 9 separate sensor IDs can be paired with smart computer. If the maximum number
of sensors have been paired, with the computer in pairing standby state, press MENU
for 4 seconds to clear all pairings.
Important
Clock setting
Tire circumference setting
Pairing (Sensor ID synchronization)
Switch top of screen display
Smart computer
You can choose to display current speed, cadence, or heart rate at the top of the screen.
Measurement items that require a sensor that is not paired cannot be selected.
Important
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, smart computer returns to the
measurement screen.
2. Press MODE to display the screen shown below, and then press MODE
for 2 seconds.
3. Press MODE to select one of the three displays.
Measurement
screen
Menu screen
(Clock setting)
(2 seconds)
4. Press MENU to confirm settings.
Pressing MENU again returns to the measurement screen.
* If you have changed settings, always press MENU to confirm changes.
Heart rate
Heart rate
Heart rate
Cadence
Cadence
Cadence
Current speed
Current speed
Current speed
Total distance manual input
Measurement unit setting
Function setting
Clock setting
Tire circumference setting
Pairing (Sensor ID synchronization)
Switch top of screen display
Function setting
Smart computer
It is possible to skip certain functions displayed at the bottom of the screen.
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, smart computer returns to the
measurement screen.
2. Press MODE to display the screen shown below, and then press MODE
for 2 seconds.
3. Switch off the functions you want to skip by moving to the relevant icon
and turning the setting off.
Measurement
screen
Menu screen
(Clock settings)
(2 seconds)
Total distance manual input
Measurement unit setting
* Current speed, elapsed time, heart rate, cadence, and power cannot be skipped.
4. Press MENU to confirm settings.
Pressing MENU again returns to the measurement screen.
* If you have changed settings, always press MENU to confirm changes.
(2 seconds)
Clock setting
Tire circumference setting
Pairing (Sensor ID synchronization)
Switch top of screen display
Function setting
Total distance manual input
Smart computer
If you enter a desired value for total distance, you can start your next trip from that value.
* This function is useful when you want to continue from the same distance after purchasing a
new smart computer or when resetting smart computer.
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, smart computer returns to the
measurement screen.
2. Press MODE to display the screen shown below, and then press MODE
for 2 seconds.
3. Enter the total distance.
* Decimal values cannot be entered.
Measurement
screen
Menu screen
(Clock setting)
(2 seconds)
Measurement unit setting
4. Press MENU to confirm settings.
Pressing MENU again returns to the measurement screen.
*If you have changed settings, always press MENU to confirm changes.
Increase number
Move to next digit
(2 seconds)
Clock setting
Tire circumference setting
Pairing (Sensor ID synchronization)
Switch top of screen display
Function setting
Total distance manual input
Measurement unit setting
Smart computer
You can select the measurement unit (km or miles).
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, smart computer returns to the
measurement screen.
2. Press MODE to display the screen shown below, and then press MODE
for 2 seconds.
3. Press MODE to select the measurement unit.
Measurement
screen
Menu screen
(Clock setting)
(2 seconds)
4. Press MENU to confirm settings.
Pressing MENU again returns to the measurement screen.
* If you have changed settings, always press MENU to confirm changes.
* When the measurement unit is changed, existing measurement data is automatically
converted to the new unit.
1
2 3
Smartphone (App Only)
1
2 3
Smartphone (App Only)
1
2 3
Smartphone (App Only)
Battery replacement
! Smart computer
Strada Smart
When (battery icon) turns on, it is time to replace the battery.
Install a new lithium battery (CR2032) with the (+) side facing upward.
* After replacing the battery, press AC on the back of the computer.
(Restart operation)
Press
Slide
Waterproof inner cap
* Press the top edge of waterproof
inner cap to remove it. Install the
cap with the “TOP” faced upward.
Click
Padrone Smart
When (battery icon) turns on, it is time to replace the battery.
Install a new lithium battery (CR2032) with the (+) side facing upward.
* After replacing the battery, press AC on the back of the computer.
(Restart operation)
Open
Close
Heart rate sensor (HR-12)
If using a CATEYE sensor, the values related to the sensor's battery replacement period
start flashing to indicate that it is time to replace the battery.
Important
If smart computer's heart rate display starts flashing, it is time to replace the battery.
Install a new lithium battery (CR2032) so that the (+) side is visible and close the battery
cover securely.
* After replacing the battery, always press RESET.
! Optional sensors
Speed (cadence) sensor (ISC-12)
If using a CATEYE sensor, the values related to the sensor's battery replacement period
start flashing to indicate that it is time to replace the battery.
Important
If smart computer's current speed or cadence display starts flashing, it is time to replace
the battery.
Install a new lithium battery (CR2032) so that the (+) side is visible and close the battery
cover securely.
* After replacing the battery, always press RESET and check the position of the sensor
relative to the magnet.
Activating the sensor
• Power sensor
Refer to the power sensor instruction manual.
Activate the sensor via the following method:
• Speed sensor / Speed (cadence) sensor (ISC) / Cadence sensor
Move the magnet through the sensor zone several times. (Within 3 mm)
Sensor zone
Magnet
• Heart rate sensor
Rub both electrode pads with thumbs to transmit heart rate signal.
Electrode pads
Determining tire circumference
Determine tire circumference (L) by referring to the tire size chart or by measuring the actual
circumference of your bicycle tire.
Tire circumference reference table
* The tire size or ETRTO code is indicated on the side of the tire.
Measure actual tire circumference
With tire air pressure adjusted appropriately, apply a load to the bicycle.
Using the valve, etc., as a marker, rotate the tire once and measure the distance traveled
along the ground.
When using front
wheel for speed
measurement
When using rear
wheel for speed
measurement
Power sensor calibration
• Before starting calibration, read the power sensor instruction manuals and check the
precautions for the calibration procedure. If calibration fails, accurate power measurement
cannot be made.
• Always perform calibration without any power applied to parts to which the power sensor is
attached (cranks, etc.)
Caution
When the power sensor is used continuously, slight variation may occur in its unloaded state.
Correct this by calibrating it periodically.
When making a particularly important measurement, it is recommended that you calibrate the
sensor in advance.
Smart computer
(4 seconds)
Measurement
screen
Calibration screen
While measurement is stopped, on the measurement screen, press MENU for four seconds.
Calibration is completed in 3 seconds.
Power sensor calibration
• Before starting calibration, read the power sensor instruction manuals and check the
precautions for the calibration procedure. If calibration fails, accurate power measurement
cannot be made.
• Always perform calibration without any power applied to parts to which the power sensor is
attached (cranks, etc.)
Caution
When the power sensor is used continuously, slight variation may occur in its unloaded state.
Correct this by calibrating it periodically.
When making a particularly important measurement, it is recommended that you calibrate the
sensor in advance.
Smartphone
While measurement is stopped, on the [Trip] screen, press the [Calibrate] button.
Calibration is completed in 3 seconds.
Calibrate
Frequently Asked Questions
Measurement does not work
In Mirror Mode
In Sensor Direct Mode
Cannot measure heart rate
Cannot measure power
Data cannot be reset
On the measurement screen, press MODE for 3 seconds.
Data is not saved
Why is data sometimes not saved as summary data even after a reset operation?
• Measurements for trips of 0.1 km or shorter are not saved as summary data.
Abnormal display
General
Heart rate
Altitude
Power
Data cannot be uploaded
Difference between "finishing a trip" and "completing measurement"
What does "finishing a trip" mean?
• "Finishing a trip" refers to resetting smart computer (by pressing MODE for 3 seconds).
This action resets measurement values to 0 and changes the screen to the "ready"
display. You can then start measuring your next trip.
What does "completing measurement" mean?
• "Completing measurement" refers to saving and uploading a trip or a series of trips from
the save & upload screen in Cateye Cycling™. You can do this by tapping
(flag) on
the trips screen in Cateye Cycling™.
Why does my smartphone battery drain so quickly?
Have you been leaving [Connect] turned on in Cateye Cycling™ even when you are
not performing measurement?
• It is recommended that you turn off [Connect] from
(MENU) to minimize
smartphone battery drain.
Why can't I upload activities to a service site?
• Have you completed login settings for each service site? From Cateye Cycling™, tap
(Menu) - [Account], and then complete login settings by entering account information for
each site.
Frequently Asked Questions
Abnormal display : General
Why are speed values strange?
If you are not using a sensor that is capable of measuring speed, smart computer uses
your smartphone's GPS for measurement, so depending on reception conditions (for
example, if you are in a tunnel), measurement may be interrupted or smart computer may
indicate values other than actual values.
Why are power values flashing on and off?
When using separate left and right power sensors, power values flash on and off to
indicate that only signals from one sensor are being received.
Check the power sensor.
Why are measurement values flashing on and off?
If using a CATEYE sensor, measurement values start flashing to indicate that there is little
remaining battery power in the relevant sensor.
Replace the battery for the relevant sensor.
Battery replacement : Optional sensors
What does the icon on the screen mean?
Smart computer memory is full.
If you are using smart computer with a smartphone, connect to Cateye Cycling™ and
import data. This will clear the memory and the icon will turn off. If you are using smart
computer by itself, this icon will have no affect on measurement. Continue measurement
as normal.
The screen is frozen. What should I do?
Press the AC button on the back of smart computer.
(Restart operation)
The display is behaving abnormally. How do I fix it?
The display may be abnormal if there is something that emits radio waves (such as
railway tracks or a TV transmitter station) in the vicinity. Move away from the possible
cause, reset smart computer (press MODE for 3 seconds), and start measurement again.
Why is the display blank?
The battery is flat. Replace the battery with a new one.
Battery replacement : Smart computer
Frequently Asked Questions
Abnormal display : Heart rate
Why are heart rate readings still displayed even after I take off the sensor?
When using a sensor made by another company, heart rate may continue to be displayed
for a long time after the sensor has been removed.
Heart rate display is unstable. What should I do?
The heart rate sensor may not be attached correctly.
• Refer to the heart rate sensor instruction manual and attach the heart rate sensor in the
correct position.
Wearing the heart rate sensor
• Ensure that the heart rate sensor is attached so that TOP is facing up.
• Try moving the electrode from the left to the right so that it sits over your heart. This may
improve heart rate display in some cases.
Frequently Asked Questions
Abnormal display : Power
Power display is not accurate. How can I fix it?
Calibrate the power sensor.
When measuring in Mirror Mode
When measuring in Sensor Direct Mode or using smart computer by itself
Frequently Asked Questions
Abnormal display : Altitude
Why is there variation in measurement values for ascending altitude?
As altitude measurement relies on the smartphone's GPS function, it may be different from
the actual altitude.
Frequently Asked Questions
Measurement does not work :
In Mirror Mode
The display says "ready", but measurement will not start. What should I do?
Smart computer does not switch to Mirror Mode measurement screen. What should I do?
Have you installed Cateye Cycling™ in your smartphone?
• Install Cateye Cycling™.
If using an iPhone
If using an Android smartphone
* See Cateye Cycling Recommended Devices for the latest information about
smartphones recommended for use with Cateye Cycling™.
Have you paired your smartphone with smart computer?
• If you do not pair smart computer via Cateye Cycling™, smart computer cannot perform
Mirror Mode measurement.
Smartphone : Pairing with smart computer
Is [Connect] set to [ON] in the Cateye Cycling™ menu on your smartphone?
• Set [Connect] to [ON] or close Cateye Cycling™.
Is smart computer in Sensor Direct Mode?
• Press MODE for 1 second.
Smart computer switches to the smartphone search screen and connects with your
smartphone.
Connecting smartphone and smart computer
Why can't I measure speed?
When using a speed (cadence) sensor (ISC-12), if the wheel magnet moves so that it is
not facing the sensor zone, the computer registers the speed signal as 0 and
measurement is not possible. (This is because the speed signal from the sensor has
priority over GPS when measuring speed.)
Display alternates between PAUSE and Trip Distance, and measurement does not start.
What is the problem?
Measurement is paused.
Press MODE for 1 second to resume measurement.
Paused
Trip distance
Alternate
display
Press MODE for 1 second. Smart computer displays Tm,
and you will be able to start measurement.
Tapping the
(Start Measurement) in Cateye Cycling™
has the same effect.
Measurement
standby
Why can't I measure without a speed sensor?
You may have to wait a little longer after starting measurement.
• Your smartphone may take a while to acquire GPS in some cases.
Wait somewhere outdoors for a while before starting.
* The time it takes to acquire GPS will depend on your smartphone.
Why is the sensor signal not being received?
Have you paired the sensor?
• You must pair smart computer with your smartphone via Cateye Cycling™.
Smartphone : Pairing with a sensor
Are you using a Bluetooth Smart sensor?
• Smart computer can only receive signals from Bluetooth Smart sensors.
The sensor battery may be flat.
• Replace the battery with a new one.
Battery replacement : Optional sensors
The magnet may not be in the correct position relative to the speed sensor or speed
(cadence) sensor (ISC).
Refer to the sensor instruction manual and attach the sensor correctly.
Mounting the speed (cadence) sensor (ISC-12)
Smart computer operation is abnormal. What should I do?
Restart your smartphone.
If this does not resolve the issue, press the AC button
on the back of smart computer. (Restart operation)
Why is smart computer sometimes in sleep mode when I go back to my bike after leaving it
for a while?
When the smartphone moves away from the bicycle even for a
short time, smart computer may automatically enter sleep mode.
Clicking smart computer will make it enter smartphone search
mode, allowing you to reconnect to your smartphone.
Sleep
The location or weather may not be appropriate for acquiring a GPS signal.
• If your smartphone's GPS connection is lost, smart computer can no longer perform
measurement.
* For information on how to acquire a GPS signal, refer to your smartphone instruction
manual.
I lost the connection between my smartphone and a connected device
(smart computer or sensor). How do I reconnect them?
If you cannot reconnect to the sensor
Press the reset button on the sensor.
If this does not resolve the issue, restart your smartphone.
If you cannot reconnect to the smart computer
Cateye Cycling™ may have terminated abnormally.
• Start Cateye Cycling™.
If this does not resolve the issue, try the procedure below:
• Restart your smartphone.
• Press the AC button on the back of the smart computer. (Restart operation)
Frequently Asked Questions
Measurement does not work :
In Sensor Direct Mode
Why is the sensor signal not being received?
(When using smart computer only)
Have you paired smart computer with the sensor?
Why is the sensor signal not being received?
(When using Cateye Cycling™)
Is [Connect] set to [ON] in the Cateye Cycling™ menu on your smartphone?
• Set [Connect] to [OFF] or close Cateye Cycling™.
Have you paired smart computer with the sensor?
• The sensor must be paired with smart computer.
Smart computer : Pairing with a sensor
You may be using another smartphone app at the same time that can connect with
Bluetooth sensors.
• Another Bluetooth device may be connected with your smartphone. Bluetooth sensors
are only able to connect with a single device at a time. Stop using the other app or
change its settings so that it does not connect to Bluetooth sensors.
You may be using an iPhone with a commercial sensor.
• Sensors made by another company must be paired separately with smart computer. The
same applies to tire circumference for sensors capable of measuring speed.
Smart computer : Pairing with a sensor
Smart computer : Tire circumference
Are you using a Bluetooth Smart sensor?
• Smart computer can only receive signals from Bluetooth Smart sensors.
The sensor battery may be flat.
• Replace the battery with a new one.
Battery replacement : Optional sensors
The magnet may not be in the correct position relative to the speed sensor or speed
(cadence) sensor (ISC).
• Refer to the sensor instruction manual and attach the sensor correctly.
Mounting the speed (cadence) sensor (ISC-12)
Why does smart computer not switch to the measurement screen?
Is the display at the bottom of the screen going round and round?
• Press MODE for 1 second. Smart computer will switch to the Sensor Direct Mode
measurement screen.
Smart computer operation is abnormal. What should I do?
Press the AC button on the back of smart computer.
(Restart operation)
• The sensor must be paired with smart computer.
Smart computer : Pairing with a sensor
Are you using a Bluetooth Smart sensor?
• Smart computer can only receive signals from Bluetooth Smart sensors.
The sensor battery may be flat.
• Replace the battery with a new one.
Battery replacement : Optional sensors
The magnet may not be in the correct position relative to the speed sensor or speed
(cadence) sensor (ISC).
• Refer to the sensor instruction manual and attach the sensor correctly.
Mounting the speed (cadence) sensor (ISC-12)
Frequently Asked Questions
Measurement does not work :
Cannot measure heart rate
Why isn't the [H] icon flashing?
Have you paired the sensor?
• The sensor must be paired with Cateye Cycling™ or with smart computer.
When measuring in Mirror Mode
When measuring in Sensor Direct Mode or using smart computer by itself
The electrode pad may have slipped out of position.
• Check that the electrode pad is still in close contact with your body.
Your skin may be dry.
• Wet the electrode pad a little.
The electrode pad may have deteriorated or become damaged due to prolonged
usage.
• If this is the case, replace the attachment belt with a new one.
Frequently Asked Questions
Measurement does not work :
Cannot measure power
Why isn't the [P] icon flashing?
Have you paired the sensor?
• The sensor must be paired with Cateye Cycling™ or with smart computer.
When measuring in Mirror Mode
When measuring in Sensor Direct Mode or using smart computer by itself
The power sensor may not be attached correctly.
• Refer to the power sensor instruction manual and attach the power sensor correctly.
Connecting smartphone and smart computer
1. Launch Cateye Cycling™, and from (MENU) turn on [Connect].
2. On the measurement screen, press MODE for 1 second to display the
smartphone search screen and connect with your smartphone.
When smart computer connects to a smartphone, it switches to the measurement standby
display.
* If the connection is made when Cateye Cycling™ is already measuring, [PAUSE] and
measured values are displayed.
* The appearance of the smart computer screen depends on the state of Cateye
Cycling™.
Smartphone connection is now complete.
Smartphone search
screen
Measurement
standby
Smartphone
Smart computer
• Pairing (sensor ID synchronization) must be performed in order to use smart computer and
sensors.
• Do not pair sensors at a race venue or in similar locations where there are a lot of other
users. Doing so may cause smart computer to be paired with another device.
Important
1. From (MENU) at the top left of the screen, turn on [Connect], and
then tap [Device].
Smartphone
Pairing
Tap [Device Pairing] to start pairing.
For instructions on using devices, refer to the following:
Pairing with smart computer
Smart computer
Smartphone
1. On the measurement screen, press MODE for 1 second to display the
smartphone search screen.
When Cateye Cycling™ detects smart computer, a message is displayed on the
smartphone.
Tap [Pair] to complete pairing.
After pairing is completed, from
(MENU) at the top left of the screen, tap [Trip] to
switch to the Trip screen.
Smartphone search
screen
Pairing with a sensor
1. Activate the sensor.
Activating the sensor
When Cateye Cycling™ detects the sensor signal, a message is displayed on the
smartphone.
Tap [Pair]. The synchronized sensor is displayed on the [Device] screen and pairing is
completed.
* When pairing a sensor with Cateye Cycling™, an "A" is displayed after the sensor
name.
* If you have paired a sensor capable of speed measurement, proceed to step 2.
2. Enter the tire circumference.
From the [Device] screen, tap the added sensor and select a tire circumference (the
length of the outer circumference of the tire).
* Default value: 2,096 mm (700x23c)
* Set tire circumference for each sensor.
* You can also change sensor names and cancel pairing from this screen.
Determining tire circumference
Sensor pairing is now complete.
* Pair all sensors that you intend to use.
If you want to pair another sensor, repeat the same procedure again.
Smartphone
• Pair all sensors that you intend to use. If you want to pair another sensor, repeat the
same procedure again.
• When using an iPhone, you cannot sync settings of commercial sensors.
When measuring in Sensor Direct Mode, it is necessary to configure sensor settings
separately via smart computer.
1. Switching to Sensor Direct Mode
2. Pairing (Sensor ID synchronization)
3. Tire circumference setting
Important
Smart computer can be used with sensors compatible with Bluetooth 4.0. Pair it with
optional accessories or commercial sensors as required.
Smart computer
When the smartphone switches to the Trip screen, smart computer switches from the
smartphone search screen to the [ready] (measurement standby) display.
Smartphone search
screen
Measurement
standby
Smart computer pairing is now complete.
* If you have other sensors, continue pairing them.
Pairing (Sensor ID synchronization)
Pair a sensor that you want to use with smart computer.
• Pairing (sensor ID synchronization) must be performed in order to use a sensor.
• Do not pair sensors at a race venue or in similar locations where there are many other
users. Doing so may cause smart computer to be paired with another sensor.
• Pair all sensors that you intend to use.
Important
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, smart computer returns to the
measurement screen.
2. Press MODE to display the screen shown below, and then press MODE
for 2 seconds.
3. Activate the sensor that you want to pair.
Activating the sensor
The synchronized sensor is displayed on the top of the screen and pairing is completed.
• SP : Speed sensor
• ISC : Speed/cadence sensor
• CD : Cadence sensor
Measurement
screen
Menu screen
(Clock setting)
(2 seconds)
Ready for
synchronization
Sensor
activated
Synchronization
complete
• HR : Heart rate sensor
• PW : Power sensor
* When pairing a sensor with a smart computer, a "C" is displayed after the sensor name.
* Pairing standby time is 5 minutes. Activate the sensor within this time.
4. Press MENU to confirm pairing.
If you want to continue pairing another sensor, repeat the same operations again.
Pressing MENU again returns to the measurement screen.
* If you have changed settings, always press MENU to confirm changes.
When smart computer displays [FULL] on the screen and returns to the menu:
Up to 9 separate sensor IDs can be paired with smart computer. If the maximum number
of sensors have been paired, with the computer in pairing standby state, press MENU
for 4 seconds to clear all pairings.
Important
Tire circumference setting
Set the tire circumference for a sensor capable of speed measurement.
• Pairing (sensor ID synchronization) must be performed first.
Pairing (Sensor ID synchronization)
• Set tire circumference for each sensor. The default value is 2096 mm (700x23c).
Important
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, smart computer returns to the
measurement screen.
2. Press MODE to display (tire icon) and then press MODE for 2
seconds.
3. Select the sensor you want to set, and enter the tire circumference.
Enter the circumference in mm of the tire (the length of the outer circumference of the tire)
on which the sensor is installed.
(Setting range: 0100 – 3999 mm)
Determining tire circumference
Measurement
screen
Menu screen
(Clock setting)
(2 seconds)
* Sensors that can be selected are those that have been paired with Cateye Cycling™ or
a smart computer. The letter that appears after the sensor name indicates how the
sensor was paired.
• A : Sensor paired with Cateye Cycling™
• C : Sensor paired with a smart computer
* Error is displayed if values outside the setting range are entered.
4. Press MENU to confirm settings.
Pressing MENU again returns to the measurement screen.
* If you have changed settings, always press MENU to confirm changes.
Sensor selection
(2 seconds)(2 seconds)
(2 seconds)
Increase numbers
Tire circumference value
Move to next digit
Mounting the speed (cadence) sensor (ISC-12)
The speed (cadence) sensor can be mounted either on the top or bottom of the chain stay.
See illustrations
Mounting on top of chain stay
Mounting on bottom of chain stay
* Mounting procedures give instructions for mounting on the top of the chain stay.
1. Temporarily attach the sensor to the left chain stay.
(1) Loosen the sensor screw using a Phillips screwdriver and check that the sensor
arm moves.
Cadence magnet
Wheel
magnet
Speed (cadence)
sensor
Cadence
magnet
Wheel magnet
Speed (cadence) sensor
If the speed (cadence) sensor is mounted on the bottom of the chain stay rather than
on the top, the adjustment range between the sensor and the magnet will be
narrower.
Caution
Watch video
If the speed (cadence) sensor is mounted on the bottom of the chain stay rather than on the
top, the adjustment range between the sensor and the magnet will be narrower.
Caution
(2) Attach the sensor rubber pad to the sensor.
Sensor arm
Sensor
rubber pad
(3) Refer to the illustration and temporarily attach the sensor to the left chain stay with
nylon ties.
2. Temporarily attach the magnet.
Nylon tie
left chain stay
Cadence
magnet
Inside of the crank
Spoke
Nylon tie
Sensor
zone
Wheel magnet
(1) Using a nylon tie, temporarily attach the cadence magnet to the inside of the left
crank arm so that it faces the cadence sensor zone.
(2) Rotate the sensor arm and temporarily attach the wheel magnet to a spoke facing
Do not fully tighten the nylon ties. Once the nylon ties are fully tightened they cannot
be removed.
Caution
Sensor screw
(2) Rotate the sensor arm so that the gap between the wheel magnet and the speed
sensor zone is approximately 3 mm, then tighten the sensor screw securely.
4. Secure all parts.
Tighten the sensor's nylon ties, the sensor screw, and the magnets, and check that
they are not loose.
Trim off the excess nylon tie.
* If using pedals with steel axles, the cadence magnet can be attached magnetically to
the pedal axle. In this case, remove the adhesive tape from the magnet and do not
use the nylon tie.
the speed sensor zone.
* If the sensor cannot is not positioned so that both magnets (speed and cadence)
pass through their respective sensor zones, reposition the sensor and the magnets
so that each magnet passes through its sensor zone.
3. Adjust the gap between the sensor zone and the magnet.
(1) Tilt the sensor so that the gap between the cadence magnet and the cadence
sensor zone is approximately 3 mm, then fasten the sensor securely with nylon ties.
Cadence
magnet
Wheel magnet
Sensor screw
Wearing the heart rate sensor (HR-12)
Watch video
See illustrations
* Wear the heart rate sensor so that TOP faces up.
1. Attach the sensor to the HR strap.
Press until you hear a clicking sound.
2. Wear the HR strap by sliding the hook over the other end of the strap.
Wind the HR strap around your body and adjust the length to suit your chest
(underbust). Overtightening the strap may cause discomfort during measurement.
Heart rate sensor
HR strap
Hook
Electrode pads
Back side
• To eliminate measurement errors, it is recommended to moisten the electrode pads with
water or apply electrolyte cream to the pads.
• If you have sensitive skin, moisten the electrode pads with water and wear it over a thin
shirt.
• Chest hair may interfere with measurement in some cases.
Heart rate measurement is performed by wearing a heart rate sensor around the chest.
Before wearing the heart rate sensor
Never use this device if you use a pacemaker.
Warning
* Ensure that the electrode pads are in close contact with your body.
* If you have dry skin or are wearing the sensor over a shirt, measurement errors may
result. In such cases, moisten the electrode pads with water.
Handling and Support
Standard accessories / Optional accessories
Standard accessories
1600280N
Bracket band
1602193
Bracket
1602194
Bracket kit
Maintenance
If smart computer unit or accessories become dirty, clean with a soft cloth moistened with
mild detergent, and then wipe with a dry cloth.
Never apply paint thinner, benzine or alcohol; damage will result.
Caution
Smart computer / Optional sensors
• Do not concentrate on smart computer or your smartphone while riding. Always ride
safely.
• Mount the bracket, sensor, and other components securely, and check them periodically
to ensure that they are not loose.
• Do not leave smart computer in direct sunlight for a long period of time.
• Never disassemble smart computer.
• Do not drop smart computer. Doing so may result in damage or personal injury.
• Always install the bracket band dial by hand. Using a tool or other object to tighten the
dial may crush the screw thread.
• When cleaning the smart computer and accessories, do not use thinners, benzine, or
alcohol.
• Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to local regulations.
• The LCD screen may be distorted when viewed through sunglasses with polarized lens.
Cateye Cycling™
Smart computer can be used with the Cateye Cycling™ smartphone app for measurement
and settings.
Downloading and using applications involves communication charges. It is therefore
recommended to use Wi-Fi.
Specifications
Batteries used/battery life
! Smart computer
• Padrone Smart unit:
Lithium battery (CR2032) x1 / Approximately 4 months
1603970
Speed sensor
(ISC-12)
1603980
Heart rate sensor (HR-12)
1603595
HR strap
1603892
Slim bracket kit
1699766
Cadence magnet
1603893
Rubber band / nylon tie
1699691N
Wheel magnet
1665150
Lithium battery (CR2032)
Optional accessories
The Bluetooth word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by CATEYE Co.,
Ltd. is under license. Other trademarks and trade names are
those of their respective owners.
1604100
Out-front bracket
Product warranty
(When ISC-12 and HR-12 are paired and used for one hour a day.)
• Strada Smart unit:
Lithium battery (CR2032) x1 / Approximately 5 months
(When ISC-12 and HR-12 are paired and used for one hour a day.)
! Optional sensors
• Heart rate sensor (HR-12):
Lithium battery (CR2032) x1 / Approximately 5 months
(If used for 1 hour a day.)
• Speed sensor (ISC-12):
Lithium battery (CR2032) x1 / Approximately 5 months
(If used for 1 hour a day.)
* As pre-installed battery is for monitor use, battery life may be shorter than that indicated
above.
* Battery life may be reduced depending on the number of sensors paired and usage
conditions.
Controller
Microcomputer (Crystal controlled oscillator)
Display
Liquid crystal display (LCD)
Current speed and cadence detection
Non-contact magnetic sensor (ISC-12)
* Current speed can also be measured via smartphone GPS.
Sensor signal transmission/reception
Bluetooth 4.0
Signal range
Speed sensor tire circumference range
0100 to 3,999 mm
(Default value: 2,096 mm)
Operating temperature range
0°C to 40°C
* Display visibility may deteriorate if used outside operating temperature range.
Dimensions/weight
! Smart computer
• Padrone Smart unit:
2-21/32” x 1-11/16” x 39/64” (67.5 x 43 x 15.6 mm) / 1.06 oz (30 g)
• Strada Smart unit:
1-27/32" x 1-17/64" x 33/64" (47 x 32 x 13.2 mm) / 0.6 oz (17 g)
! Optional sensors
• Heart rate sensor (HR-12):
1-7/32" x 2-29/64" x 29/64" (31 x 62.5 x 11.8 mm) / 0.59 oz (16.6 g)
• Speed sensor (ISC-12):
2-49/64" x 3-25/64" x 59/64" (70.4 x 86.3 x 23.5 mm) / 0.68 oz (19.2 g)
(With arm pointing down)
* Specifications and design are subject to change without notice.
2-year guarantee
• Padrone Smart unit
• Strada Smart unit
• ISC-12 Speed/cadence sensor
• HR-12 Heart rate sensor
(Accessories and battery consumption excluded)
CatEye cycle computers are warranted to be free of defects from materials and
workmanship for a period of two years from original purchase. If the product fails to work
due to normal use, CatEye will repair or replace the defect at no charge. Service must be
performed by CatEye or an authorized retailer. To return the product, pack it carefully and
enclose the warranty certificate (proof of purchase) with instruction for repair. Please write
or type your name and address clearly on the warranty certificate. Insurance, handling and
transportation charges to CatEye shall be borne by person desiring service. For UK and
REPUBLIC OF IRELAND consumers, please return to the place of purchase. This does
not affect your statutory rights.
2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan
Attn: CATEYE Customer Service Section
Phone : (06)6719-6863
Fax : (06)6719-6033
E-mail : support@cateye.co.jp
URL : http://www.cateye.com
[For US Customers]
CATEYE AMERICA, INC.
2825 Wilderness Place Suite 1200, Boulder CO 80301-5494 USA
Phone : 303.443.4595
Toll Free : 800.5.CATEYE
Fax : 303.473.0006
E-mail : service@cateye.com
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p) is not more than that
necessary for successful communication.
Conformément á la réglementation d’lndustrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d’un type d’un gain maximal (ou inférieur) approuvé pour
l’émetteur par lndustrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique á l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain
de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e) ne dépasse pas l’intensité
nécessaire á l’établissement d’une communication satisfaisante.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’lndustrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
CAN ICES-3 (B) / NMB-3 (B)
Legal Notices
… 17 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cateye CC-RD500B Strada Smart bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cateye CC-RD500B Strada Smart in de taal/talen: Engels als bijlage per email.

De handleiding is 3,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Cateye CC-RD500B Strada Smart

Cateye CC-RD500B Strada Smart Gebruiksaanwijzing - Nederlands - 151 pagina's

Cateye CC-RD500B Strada Smart Gebruiksaanwijzing - Deutsch - 151 pagina's

Cateye CC-RD500B Strada Smart Gebruiksaanwijzing - Français - 150 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info