9
Only use Cat® phone approved chargers and cables. Unapproved equipment may cause damage to the device
and the battery.
2. Open the USB port cover and connect the USB power cable to the USB port.
Be careful not to use excessive force when plugging the USB cable. Any damage caused by attempting to insert
the connector incorrectly is not covered by the warranty.
3. Plug the charger into an AC mains socket.
4. Battery indicator stops blinking when charging is completed.
Remove the USB cable from the device and unplug the power adapter from the mains socket. Close the USB
port cover on the device.
IMPORTANT INFORMATION REGARDING FUTURE USE OF THE
BATTERY
If the battery is completely exhausted, your device may not power on immediately after charging starts. Allow
the battery to charge for a few minutes before attempting to turn it on. The on-screen charge animation may
not be displayed during this period.
When the battery power is almost exhausted, your device will power off automatically. The time required to
charge the battery depends on its age and the environmental temperature.
POWERING YOUR DEVICE ON/OFF
POWER ON
• Press and hold Power .
• If a PIN code is required, please refer to the relevant section in this guide.
The first time you turn on your phone, you will see a Welcome Screen. Select your preferred language to
continue the set-up.
POWER OFF
1. Press and hold Power .
HOME SCREEN
The Home Screen is the starting point for accessing your device’s features. From here you can access Main
menu and Contacts and Main Manu.
This is what your Home Screen looks like:
