WARNING: EXTRACT THE UNISYSTEM ADAPTORS BEFORE INSTALLING THE
SEAT.
Fitting the armrest (diagrams 9-10)
Insert the ends of the armrest into the front slots of the pushchair (g.9).•
To remove the armrest, press the buttons on the sides and pull the armrest upwards •
(g.10).
Adjusting the armrest (diagram 11)
Press the side buttons on the inside of the armrest, and pull the armrest backwards or •
forwards to the required position (g. 11).
The armrest has a position while in use. It will click when correctly in place.•
Changing the direction the seat faces (diagrams 12-13)
WARNING: NEVER ADJUST THE SEAT (CHANGING THE DIRECTION IT FACES AND
FITTING OR REMOVING IT) WHILE THE CHILD IS SITTING IN IT.
Put the parking brake on.•
Press the buttons on both sides of the seat. Next, pull the seat upwards (g. 12).•
Install the seat in the required position, when correctly tted it will click into place (g. •
13).
The child can now sit in the seat.•
Adjusting the footrest (diagram 14)
The angle of the footrest can be adjusted for the child’s comfort.•
Hold both ends of the footrest and raise it to the required position•
Press the buttons on the sides and lower the footrest to the required position.•
Adjusting the handlebar (diagram 15)
The handlebar has 3 positions. To select one of the positions press the button in the •
middle of the handlebar, and place it in the correct position.
Adjusting the safety harness (diagram 16)
Put the parking brake on and check that the safety harness is unfastened before seating •
the child.
Position the child in the seat and fasten all the parts of the fastening buckle: chest •
