519063
15
Verklein
Vergroot
Pagina terug
1/58
Pagina verder
15
Operating the device
Plug the power plug into a suitable outlet.
The temperature of the cooker plate surface displayed: is the temperature of the
surface of the induction cooker lower than 50°C, the display shows „L“. When the
temperature of the cooker plate surface is over 50 °C, it is displaying „H“.
An
acoustic signal sounds. Now the device is in standby mode.
Place suitable cookware in the centre of one of the cooking fields.
You can operate the left cooking field with 2000 W and the right cooking field with
1400 W separately.
Now press the ON/Standby switch 1. to turn on of the two induction hotplates on. The
control lamps of function Stufe” and “Temp” blink and an acoustic signal sounds.
Press the Function Key 3. The preset power stage "5" is selected and the device turns on.
With the + / - Keys (5+6), you can change the settings at any time in a range from 1 10
Press the Function Key 2. to select the temperature. The preset temperature stage "120°C" is
selected and the device turns on.
With the + / - keys, you can change the settings at any time in a range from 60 240°C.
(Temperature stages: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240°C)
Timer Function. After the selection of the temperature mode press the button Time 4. until
the corresponding control lamps blink. The display shows the number "0". With the +/-
keys, you can now select the operating time in 1-minute intervals (up to max. 180
minutes). Once the time is up, an acoustic signal sounds and the device automatically
goes into standby mode. Notice: during timer operation, you can change the duration at
any time with the +/- keys. With the memory function of the device, the power stage or
temperature settings remain unchanged here.
You can also change to the power stage selection or the temperature stage selection with
the "Function" button and change the settings there without changing the preset time.
Do not place any empty cookware on the ceramic field. Heating an empty pot or pan
activates the overheating protection and the device turns off.
Do not operate the device if it is damaged in any way or does not function properly.
The use of accessories and spare parts not recommended by the manufacturer may lead
to damage on the device and injuries.
In case of “E05” appearing in the display the over heat protection has been activated.
This means that the temperature had increased to a temperature of 170°C. In this case the
device turns off automatically in order to avoid damages.
Therefore we recommend to select the function “Stufe” in case of steaming food or boiling
water for example.
In case of grilling or cooking deep fry food we would advise you to use the function
“Temperatur” as in this case you can use temperatures up to 240°C.
In case of “E05” please pull the power plug in order to reset the device. After this you can use
it again as usual.
When you switch off the device via “On/Standby” and the temperature of the cooker plate
surface is lower than 50°C, the display shows „L“. When the temperature of the cooker plate
surface is over 50 °C, it is displaying „H“.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Caso ECO 3400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Caso ECO 3400 in de taal/talen: Nederlands, Spaans als bijlage per email.

De handleiding is 0,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Caso ECO 3400

Caso ECO 3400 Gebruiksaanwijzing - Deutsch, English, Français, Italiano - 34 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info