289751
128
Verklein
Vergroot
Pagina terug
1/148
Pagina verder
1
E
Thank you for purchasing this CASIO product.
Before using it, be sure to read the precautions contained in this User’s Guide.
Keep the User’s Guide in a safe place for future reference.
For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
Digital Camera
User’s Guide
2
As you unpack your camera, check to make sure that all items shown below are
included. If anything is missing, contact your original retailer.
Unpacking
Digital camera Rechargeable lithium ion
battery (NP-60) Charger unit (BC-60L)
Power cord Strap
USB cable AV cable CD-ROM Basic Reference
To attach the strap to the camera
Attach strap here.
3
The contents of this manual and the bundled Basic Reference are subject to
change without notice.
The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost
profits, or claims by third parties arising out of the use of Photo Transport or
YouTube Uploader for CASIO.
CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that
provides a pixel yield in excess of 99.99%. This means that some very small number
of pixels may not light or may remain lit at all times. This is due to the characteristics
of the liquid crystal panel, and does not indicate malfunction.
Read this first!
Take a few test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.
4Contents
Contents
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Monitor Screen Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
❚❙
Quick Start Basics 13
What is a digital camera? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . 14
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
To charge the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
To load the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . 19
Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Turning the Camera On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
To turn power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
To turn off the camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
To shoot a snapshot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Holding the Camera Correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Deleting Images. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
To delete a single file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
To delete all files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Auto Focus Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
❚❙
Snapshot Tutorial 31
Using the Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Size) . . 32
Using Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Flash) . . 35
Using Face Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . (Face Detection) . . 37
Reducing the Effects of Camera and Subject Movement . . . (Anti Shake) . . 39
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (ISO) . . 40
Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance) . . 40
Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . .(EV Shift) . . 42
Using the easy Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Changing the Control Panel Date/Time Style . . . . . . . . . . . . . . . . . . . . . . . . 45
Shooting with Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Optical Zoom and Digital Zoom Switch Point . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
5Contents
❚❙
Recording Movie Images and Audio 48
To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Recording Audio Only . . . . . . . . . . . . . . . . . . . . . . . . . . (Voice Recording) . . 50
To play back an audio recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
❚❙
Using BEST SHOT 52
What is BEST SHOT? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Some Sample Scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
To shoot an image with BEST SHOT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
❚❙
Advanced Settings 55
Using On-screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
REC Mode Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (REC) . . 57
Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Focus). . . 57
Using Continuous Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (CS). . . 61
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer). . . 62
Shooting with Face Detection . . . . . . . . . . . . . . . . . . . . . .(Face Detection). . . 63
Reducing the Effects of Camera and Subject Movement . . . . (Anti Shake). . . 63
Specifying the Auto Focus Area . . . . . . . . . . . . . . . . . . . . . . . . . . (AF Area). . . 63
Using the easy Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (easy Mode). . . 64
Assigning Functions to the [4] and [6] Keys . . . . . . . . . . . . . . . (L/R Key). . . 64
Displaying the On-screen Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Grid) . . . 64
Turning Digital Zoom On or Off . . . . . . . . . . . . . . . . . . . . . . .(Digital Zoom). . . 65
Turning on Image Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Review). . . 65
Using Icon Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Icon Help). . . 65
Configuring Power On Default Settings . . . . . . . . . . . . . . . . . . . . (Memory). . . 66
Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Quality) . . 67
Specifying Snapshot Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Size). . . 67
Specifying Snapshot Image Quality . . . . . . . . . . . . . . . (Quality (Snapshot)). . . 67
Specifying Movie Image Quality . . . . . . . . . . . . . . . . . . . . .(Quality (Movie)). . . 68
Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . (EV Shift). . . 68
Controlling White Balance . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance) . . . 68
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(ISO). . . 69
Specifying the Metering Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .(Metering). . . 69
Using Built-in Color Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Color Filter). . . 69
Controlling Image Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . (Sharpness). . . 70
Controlling Color Saturation . . . . . . . . . . . . . . . . . . . . . . . . . . . (Saturation). . . 70
Adjusting Image Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Contrast). . . 70
Specifying Flash Intensity . . . . . . . . . . . . . . . . . . . . . . . . . (Flash Intensity). . . 70
❚❙
Viewing Snapshots and Movies 71
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Displaying 12 Images on the Same Screen. . . . . . . . . . . . . . . . . . . . . . . . . . 72
Viewing Snapshots and Movies on a TV Screen . . . . . . . . . . . . . . . . . . . . . . 73
6Contents
❚❙
Other Playback Functions (PLAY) 75
Playing a Slideshow on the Camera . . . . . . . . . . . . . . . . . . . . (Slideshow) . . 75
Selecting Images for Printing . . . . . . . . . . . . . . . . . . . . . (DPOF Printing) . . 76
Protecting a File Against Deletion . . . . . . . . . . . . . . . . . . . . . . . . (Protect) . . 76
Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation) . . 77
Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Resize) . . 77
Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Trimming) . . 78
Adding Audio to a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . (Dubbing) . . 78
To play snapshot audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Copying Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Copy) . . 80
❚❙
Printing 81
Printing Snapshots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Connecting Directly to a PictBridge Compatible Printer . . . . . . . . . . . . . . . . 82
Using DPOF to Specify Images to be Printed and the Number of Copies. . . 84
❚❙
Using the Camera with a Computer 87
Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . 88
Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Playing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Uploading Movie Files to YouTube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Transferring Images from Your Computer to Camera Memory. . . . . . . . . . . . . . 95
Viewing User Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . (PDF Files). . . 97
User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . . 98
Transferring Images Automatically and Managing Them
on Your Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Playing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Viewing User Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . (PDF Files) . . 102
User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Using an Eye-Fi Wireless SD Memory Card to Transfer Images . (Eye-Fi) . 103
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
❚❙
Other Settings (Set Up) 107
Selecting a REC Mode Screen Layout . . . . . . . . . . . . . . . . . . (R Panel) . 107
Selecting a PLAY Mode Screen Layout . . . . . . . . . . . . . . . . (P Display) . 108
Turning off Eye-Fi Card Communication . . . . . . . . . . . . . . . . . . . . (Eye-Fi) . 108
Configuring Camera Sound Settings . . . . . . . . . . . . . . . . . . . . . (Sounds) . 109
Configuring a Startup Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Startup) . 109
Specifying the File Name Serial Number Generation Rule . . . . . (File No.) . 110
Configuring World Time Settings . . . . . . . . . . . . . . . . . . . . . (World Time) . .111
7Contents
Time Stamping Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . (Timestamp) . 112
Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) . 112
Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . 113
Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) . 113
Configuring Sleep State Settings . . . . . . . . . . . . . . . . . . . . . . . . . (Sleep) . 114
Configuring Auto Power Settings . . . . . . . . . . . . . . . . . . (Auto Power Off) . 114
Configuring [r] and [p] Settings . . . . . . . . . . . . . . . . . . . (REC/PLAY) . 115
Configuring USB Protocol Settings . . . . . . . . . . . . . . . . . . . . . . . . . (USB) . 115
Selecting the Screen Aspect Ratio and
Video Output System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Video Out) . 116
Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . (Format) . 117
Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . (Reset) . 117
❚❙
Configuring Monitor Screen Settings 118
Using the On-screen Histogram to Check Exposure . . . . . . (+Histogram) . 118
How to Use the Histogram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
❚❙
Appendix 120
Precautions during Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
To replace the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
To replace the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Computer System Requirements for Bundled Software . . . . . . . . . . . . . . . 132
Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Number of Snapshots/Movie Recording Time/Voice Recording Time . . . . . 142
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
8
The numbers in parentheses indicate the pages where each item is explained.
.Camera
General Guide
1Shutter button (page 24)
2[ON/OFF] (Power)
(page 23)
3Flash (page 35)
4Front lamp
(pages 27, 62)
5Lens
6Microphone
(pages 49, 79)
7Back lamp
(pages 23, 25, 35)
8Zoom button
(pages 24, 45, 72)
btBattery/memory card slots (pages 17, 21, 128, 130)
ckTripod hole
Use this hole when attaching to a tripod.
clSpeaker
3
4
21
5
6
87 9bk
bl
bm
bobpbqbrbs bn
[ ]
[ ]
[ ]
[ ]
[
SET
]
Front Back
ckcl
bt
Bottom
9Strap hole (page 2)
bkConnector cover
blUSB/AV port
(pages 73, 82, 89, 98)
bm[r] (REC) button
(pages 23, 24)
bn[SET] button (page 31)
bo[BS] button (page 52)
bp[MENU] button
(page 55)
bqControl button
([8][2][4][6])
(pages 29, 31, 35, 118)
br[p] (PLAY) button
(pages 23, 28)
bsMonitor screen
(pages 10, 118)
9
.Charger Unit
3
2
11[CHARGE] Lamp
2+- Contacts
3AC jack
10
The monitor screen uses various indicators, icons, and values to keep you informed
of the camera’s status.
The sample screens in this section are intended to show you the locations of all the
indicators and figures that can appear on the monitor screen in various modes.
They do not represent screens that actually appear on the camera.
.Snapshot Recording
Monitor Screen Contents
Panel : On
Panel : Off
1Focus mode (page 57)
2Continuous shutter (page 61)
3Self-timer (page 62)
4Recording mode (page 24)
5Image deterioration indicator (page 46)
6Metering mode (page 69)
7Remaining snapshot memory capacity
(page 142)
8Snapshot image size (page 32)
9Snapshot image quality (page 67)
bkFlash (page 35)
blFace detection (page 37)
bmAnti Shake (page 39)
bnISO sensitivity (page 40)
boWhite balance setting (page 40)
bpExposure compensation (page 42)
bqeasy Mode (page 43)
brDate/time (page 45)
bsShutter speed
btAperture value
ckBattery level indicator (page 18)
clHistogram (page 118)
cmFocus frame (pages 25, 63)
NOTE
If the current aperture, shutter speed, ISO sensitivity, or Auto Exposure is not
correct, the setting will turn orange when you half-press the shutter button.
bm
bq
bk
bl
bo
bp
br
bn
bsbt
ck
cl
78 956342
cm
bn
1
bs
bt
bn
9
1bo23456 7
br
ck bp
cm
cl
bm
8
11
.Movie Recording
easy Mode
Panel : On
Panel : Off
1Recording mode (page 48)
2Remaining movie memory capacity
(page 48)
3Movie image quality (page 68)
4Focus mode (page 57)
5Self-timer (page 62)
6White balance setting (page 40)
7Exposure compensation (page 42)
8Battery level indicator (page 18)
9Histogram (page 118)
bkMovie recording time (page 48)
bk
3
7
br
ck
8
cm
1 2
8
9
bk
6
3
4
7
5
46 51
8
9
2
bk
7
12
.Snapshot Viewing
.Movie Playback
1File type
2Protect indicator (page 76)
3Folder name/file name (page 104)
4Snapshot image quality (page 67)
5Snapshot image size (page 32)
6ISO sensitivity (page 40)
7Aperture value
8Shutter speed
9Date/time (page 45)
bkMetering mode (page 69)
blWhite balance setting (page 40)
bmFlash (page 35)
bnRecording mode
boBattery level indicator (page 18)
bpHistogram (page 118)
bqExposure compensation (page 42)
1File type
2Protect indicator (page 76)
3Folder name/file name (page 104)
4Movie recording time (page 71)
5Movie image quality (page 68)
6Date/time (page 45)
7Battery level indicator (page 18)
321
bp
bq
bo blbkbmbn
4
7
5
8
9
6
1
4
5
7
23
6
13 Quick Start Basics
Quick Start Basics
What is a digital camera?
A digital camera stores images on a memory card, so you can record and
delete images a countless number of times.
You can use the images you record in a variety of different ways.
Store images on your
computer.
Print images. Attach images to e-mail.
PlayDelete
Record
14 Quick Start Basics
Your CASIO camera is packed with a powerful selection of features and functions to
make recording of digital images easier, including the following three main functions.
What you can do with your CASIO camera
BEST SHOT
Simply select the sample scene you want and the
camera sets up automatically. Then all you need
do is press the shutter button for perfect images.
Anti Shake
The camera corrects automatically to minimize
image blur due to camera movement and high-
speed subject movement.
See page 39 for more information.
See page 52 for more information.
See page 37 for more information.
Face Detection
Point the camera at a person and it automatically
detects the person’s face for beautiful portraits
every time.
15 Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps
under “To charge the battery” to bring the battery to a full charge.
Your camera requires a special CASIO rechargeable lithium ion battery (NP-60) for
power. Never try to use any other type of battery.
1. Positioning the positive + and
negative - terminals of the battery
with those of the charger unit, load
the battery into the charger unit.
2. Plug the charger unit into a
household power outlet.
About 90 minutes are required to reach
full charge. The [CHARGE] lamp will go
out when charging is complete. Unplug
the power cord from the power outlet
and then remove the battery from the
charger.
First, charge the battery prior to use.
To charge the battery
Lamp Status Description
Lit Red Charging
Flashing Red Charger unit or battery problem (page 128)
Off Charging complete or standing by, due to abnormally
high or low ambient temperature (page 128)
[CHARGE] lamp
16 Quick Start Basics
Other Charging Precautions
Use the special charger (BC-60L) to charge the special lithium ion battery (NP-60).
Never use any other type of charger device. Attempting to use a different charger
can result in unexpected accident.
A battery that is still warm due to normal use may not charge fully. Give the battery
time to cool before charging it.
A battery discharges slightly even when it is not loaded in the camera. Because of
this, it is recommended that you charge the battery immediately before you need to
use it.
Charging the camera’s battery may cause interference with TV and radio reception.
If this happens, plug the charger into an outlet that is further away from the TV or
radio.
Actual charging time depends on current battery capacity and charging conditions.
17 Quick Start Basics
1. Open the battery cover.
Pressing the battery cover, slide it in the direction
indicated by the arrow.
2. Load the battery.
With the EXILIM logo on the
battery facing downwards (in
the direction of the lens), hold
the stopper next to the battery in
the direction indicated by the
arrow as you slide the battery
into the camera. Press the
battery in until the stopper
secures it in place.
3. Close the battery cover.
Pressing the battery cover against the camera,
slide it closed.
For information about how to replace the battery,
see page 128.
To load the battery
2
1
Stopper
EXILIM logo
Front Back
Battery contacts
1
2
18 Quick Start Basics
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates
remaining power as shown below.
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when is indicated. Charge the battery immediately.
The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
Leaving the camera for about two days with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
112).
See page 146 for information about battery life and memory capacity.
Battery Power Conservation Tips
When you do not need to use the flash, select ? (flash off) for the flash setting
(page 35).
Enable the Auto Power Off and the Sleep features to protect against wasting
battery power when you forget to turn off the camera (pages 114, 114).
Remaining Power High Low
Battery Indicator ***
Indicator Color Cyan *Amber *Red *Red
19 Quick Start Basics
The first time you load a battery into the camera, a screen appears for configuring the
display language, date, and time settings. Failure to set the date and time correctly
will cause the wrong date and time data to be recorded with images.
IMPORTANT!
A screen for language selection will not appear in step 2 of the procedure below if
you purchased a camera intended for the Japanese market. To change the display
language from Japanese in this case, use the procedure under “Specifying the
Display Language (Language)” (page 113). Note that a version of this manual in
the language you select may not be included with a camera intended for the
Japanese market.
1. Press [ON/OFF] to turn on the
camera.
2. Use [8], [2], [4], and [6] to select
the language you want and then
press [SET].
3. Use [8] and [2] to select a date style and then press [SET].
Example: 19. 12. 10
YY/MM/DD * 10/12/19
DD/MM/YY * 19/12/10
MM/DD/YY * 12/19/10
4. Set the date and the time.
Use [4] and [6] to select the setting you want to
change and then use [8] and [2] to change it.
To switch between 12-hour and 24-hour format,
press [BS].
5. After setting the date and time, use [4] and
[6] to select “Apply” and then press [SET].
Configuring Basic Settings the First Time You Turn On the
Camera
[4]
[8]
[2]
[6]
[SET]
[ON/OFF]
[BS]
20 Quick Start Basics
NOTE
Each country controls its local time offset and the use of summer time, and so they
are subject to change.
Removing the battery from the camera too soon after configuring time and date
settings for the first time can cause the settings to be reset to their factory defaults.
Do not remove the battery from the camera for at least 24 hours after configuring
settings.
If you make a mistake configuring display language, date, or time settings with the
above procedure, refer to the following pages for information about how to correct
the settings.
Display language: Page 113
Date and time: Page 112
B
21 Quick Start Basics
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
For information about memory card capacities, see page 142.
SD Memory Card
SDHC Memory Card
Use one of the above types of memory card.
1. Press [ON/OFF] to turn off the camera and
then open the battery cover.
Pressing the battery cover, slide it in the direction
indicated by the arrow.
2. Load a memory card.
Positioning the memory card so its back
is facing upwards (in the direction of the
monitor screen), slide it into the card
slot all the way in until you hear it click
securely into place.
Preparing a Memory Card
Supported Memory Cards
To load a memory card
2
1
Front Back
Back
22 Quick Start Basics
3. Close the battery cover.
Pressing the battery cover against the camera,
slide it closed.
For information about how to replace the memory
card, see page 130.
IMPORTANT!
Never insert anything besides a supported memory card (page 21) into the memory
card slot.
Should water or any foreign object ever get into the card slot, immediately turn off
the camera, remove the battery, and contact your retailer or nearest CASIO
authorized service center.
You need to format a new memory card before using it for the first time.
1. Turn on the camera and press [MENU].
2. Select the “Set Up” tab, select “Format” and then press [6].
3. Use [8] and [2] to select “Format” and then press [SET].
IMPORTANT!
Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
Be sure to use the camera to format a memory card. Formatting a memory card on
a computer and then using it in the camera can slow down data processing by the
camera. In the case of an SD or SDHC memory card, formatting on a computer can
result in non-conformity with the SD format, causing problems with compatibility,
operation, etc.
Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi
Manager install files to your computer. Do this before formatting the card.
To format (initialize) a new memory card
1
2
23 Quick Start Basics
To enter the REC mode, press [ON/OFF] (Power) or
[r] (REC). To enter the PLAY mode, press [p]
(PLAY).
The back lamp will light (green) momentarily and the
camera will turn on. If you are entering the REC mode,
the lens will extend from the camera at this time.
Take care to ensure that nothing is restricting or
coming into contact with the lens as it extends. Holding
the lens with your hand so it cannot extend creates the
risk of malfunction.
•Pressing [p] (PLAY) while in the REC mode switches
to the PLAY mode. The lens retracts about 10 seconds
after switching modes.
The Sleep function or Auto Power Off (pages 114,
114) will turn off power automatically if you do not
perform any operation for a preset amount of time.
Press [ON/OFF] (Power).
You can configure the camera so power does not turn on when you press [r]
(REC) or [p] (PLAY). You also can configure the camera to turn off when you
press [r] (REC) or [p] (PLAY) (page 115).
Turning the Camera On and Off
To turn power on
To turn off the camera
[ON/OFF] (Power)
Back lamp
[p] (PLAY) [r] (REC)
24 Quick Start Basics
1. Press [r] (REC) to turn on the camera.
Make sure t is on the display. If it isn’t, see page 52.
2. Point the camera at
the subject.
You can zoom the
image, if you want.
To shoot a snapshot
Monitor screen
Shutter button
[r] (REC)
Snapshot mode icon
Remaining Snapshot Memory
Capacity (page 142)
w Wide Angle z Telephoto
Zoom button
25 Quick Start Basics
3. Half-press the shutter button to
focus the image.
When focus is complete, the camera
will beep, the back lamp will light
green, and the focus frame will turn
green.
4. Continuing to keep the camera still, press the shutter button the rest of
the way down.
This records the snapshot.
When you half-press the shutter button, the
camera automatically adjusts exposure and
focuses on the subject it is currently pointed
at. Mastering how much pressure is required
for a half-press and a full-press of the shutter
button is an important technique for good-
looking images.
Focus frameBack lamp
Half-press
Press lightly
until the
button stops.
Beep, beep (Image is in focus.)
Full-press
Snap (Image is recorded.)
26 Quick Start Basics
.If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the
image is not in focus (because the subject is too close, etc.) Re-point the camera at
the subject and try to focus again.
.If the subject is not in the center of the frame...
“Focus lock” (page 60) is the name of a technique you can use when you want to
shoot an image in which the subject to be focused on is not within the focus frame in
the center of the screen.
27 Quick Start Basics
Your images will not come out clearly if you move the camera when you press the
shutter button. When pressing the shutter button, be sure to hold the camera as
shown in the illustration below, and keep it still by pressing your arms firmly against
your sides as you shoot.
Holding the camera still, carefully press the shutter button and take care to avoid all
movement as the shutter releases and for a few moments after it releases. This is
especially important when available lighting is low, which slows down the shutter
speed.
NOTE
Take care that your fingers and the
strap do not cover any of the areas
indicated in the illustration.
To protect against accidentally
dropping the camera, attach the wrist
strap and make sure it is around your
fingers or wrist while you are
operating the camera.
Never swing the camera around by
its strap.
The supplied strap is intended for use
with this camera only. Never use it for
any other purpose.
Holding the Camera Correctly
Horizontal Vertical
Hold the camera so the flash is
above the lens.
Flash
Front lamp
Strap
Lens
Microphone
28 Quick Start Basics
Use the following procedure to view snapshots on the camera’s monitor screen.
For information about how to play back movies, see page 71.
1. Press [p] (PLAY) to enter the
PLAY mode.
This will display one of the
snapshots currently stored in
memory.
Information about the displayed
snapshot also is included (page
12).
You also can clear the information to view only the snapshot (page 118).
You can zoom in on the image by pressing the z side of the zoom button
(page 72). If you are recording a snapshot that is very important to you, it is
recommended that you zoom the image and check its details after recording it.
2. Use [4] and [6] to scroll between images.
Holding down either button scrolls at high speed.
Viewing Snapshots
[p] (PLAY)
[6][6]
[4][4]
29 Quick Start Basics
If memory becomes full, you can delete images you no longer need to free up storage
and record more images.
IMPORTANT!
Remember that a file (image) delete operation cannot be undone.
Deleting an audio snapshot (page 78) deletes both the snapshot and the audio file.
1. Press [p] (PLAY) to enter the PLAY mode and then
press [2] ( ).
2. Use [4] and [6] to scroll through the files until the one you want to
delete is displayed.
3. Use [8] and [2] to select “Delete” and then press [SET].
To delete other files, repeat steps 2 and 3.
To exit the delete operation, press [MENU].
1. Press [p] (PLAY) to enter the PLAY mode and then press [2] ( ).
2. Use [8] and [2] to select “Delete All Files” and then press [SET].
3. Use [8] and [2] to select “Yes” and then press [SET] to delete all files.
This will cause the message “There are no files” to appear.
Deleting Images
To delete a single file
To delete all files
30 Quick Start Basics
Operation
Never open the battery cover while the back lamp is flashing green. Doing so can
result in the image you just shot being saved incorrectly, damage to other images
stored in memory, malfunction of the camera, etc.
If unwanted light is shining directly onto the lens, shade the lens with your hand
when shooting an image.
Monitor Screen when Shooting Snapshots
Subject brightness conditions can cause monitor screen response to slow and can
cause digital noise in the monitor screen image.
The image that appears on the monitor screen is for image composition. The actual
image will be recorded at the quality set for the image quality setting (page 67).
Shooting Indoors under Fluorescent Lighting
Minute flickering of fluorescent lighting can affect the brightness or color of an
image.
Any of the following can make proper focus impossible.
Solid color wall or other very low contrast subject
Strongly back lit subject
Very shiny subject
Blinds or other subject with a repeating horizontal pattern
Multiple subjects at varying distances from the camera
Subject in a dark location
Camera movement while shooting
Fast-moving subject
Subjects outside the focus range of the camera
If you cannot focus properly, try using focus lock (page 60) or Manual Focus (page
57).
Snapshot Shooting Precautions
Auto Focus Restrictions
31 Snapshot Tutorial
Snapshot Tutorial
The Control Panel can be used to configure camera settings.
1. In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
2. Use [8] and [2] to select the setting you want to change.
*Image quality cannot be changed using the Control Panel.
3. Use [4] and [6] to change the setting.
4. If you want to configure another setting, repeat steps 2 and 3.
5. After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
You also can configure settings other than those listed above (page 55).
The Control Panel cannot be displayed while an easy Mode, For YouTube, or
Voice Recording Operation is in progress.
Using the Control Panel
[SET]
Control Panel
[8] [2] [4] [6]Available settings
1
9
5
3
4
7
8
2
6
1Image size/Quality* (pages 32, 67)
2Flash (page 35)
3Face detection (page 37)
4Anti shake (page 39)
5ISO sensitivity (page 40)
6White balance (page 40)
7EV shift (page 42)
8easy Mode (page 43)
9Date/Time (page 45)
32 Snapshot Tutorial
.Pixels
A digital camera image is a collection of small
dots called “pixels”. The more pixels there are
in an image, the more detail there will be.
However, you generally can do with fewer
pixels when printing an image (L size) through
a print service, attaching an image to e-mail,
when viewing the image on a computer, etc.
.About image sizes
The size of an image indicates how many pixels it contains, and is expressed as
horizontal pixelsxvertical pixels.
Changing the Image Size (Size)
7M (3072x2304) size image =
Approximately 7 million pixels
*Unit: pixels
VGA (640x480) size image =
Approximately 300,000 pixels
Pixel
3072*
2304*
640*
480*
33 Snapshot Tutorial
Image Size Selection Tips
Note that larger images have more pixels, so they take up more memory space.
For information about image size, image quality, and number of images that can be
stored, see page 142.
For information about movie image size, see page 68.
For information about resizing existing snapshots, see page 77.
Large Number
of Pixels
More detail, but takes up more memory. Best
when you plan to print large-size prints (such
as A3 size).
Small Number
of Pixels
Less detail, but takes up less memory. Best
when you want to send images by e-mail, etc.
34 Snapshot Tutorial
.To select the image size
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the top Control Panel option (Image Size).
3. Use [4] and [6] to select an image size and then press [SET].
The initial factory default image size setting is “10M”.
Selecting “3:2” records images with an aspect ratio of 3:2, which matches the
standard aspect ratio of print paper.
The letters “HDTV” stand for “High Definition Television”. An HDTV screen has an
aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio of
television screens of the past. Your camera can record images that are compatible
with the aspect ratio an HDTV screen.
You should regard the print paper sizes suggested here as guidelines only (200 dpi
print resolution).
Image Size
(Pixels)
Suggested Print
Size and
Application
Description
10M
(3648x2736) Poster Print
Good detail for better clarity even for images
cropped (page 78) from the original
3:2
(3648x2432) Poster Print
16:9
(3648x2048) HDTV
7M
(3072x2304) A3 Print
Good detail
4M
(2304x1728) A4 Print
2M
(1600x1200) 3.5"x5" Print Best when preserving memory capacity is
relatively more important than image quality.
VGA
(640x480) E Mail
Image files are smaller, which is better when
attaching images to e-mail. However, images
are relatively coarser.
35 Snapshot Tutorial
1. In the REC mode, press [2] ( ) once.
2. Use [4] and [6] to select the flash
setting you want and then press [SET].
When the “R Panel” menu item (page 107) is
“Off” (so the Control Panel is not displayed),
pressing [2] ( ) will cycle through the
available flash settings.
3. Press the shutter button to shoot.
For information about Flash Range, see page 145.
Using Flash (Flash)
Auto Flash Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
Flash Off Flash does not fire.
Flash On
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
Red Eye
Reduction
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject’s eyes.
[2] ( )
Flash
>
?
<
¥
N
2
Back lamp
Flashes orange while the flash is charging to indicate
that image recording is disabled.
You will not be able to take another flash snapshot
until the lamp stops flashing orange, which indicates
that charging is complete.
< indicates the flash will fire.
36 Snapshot Tutorial
NOTE
Take care so your fingers and the strap do not block the flash.
The desired effect may not be obtained when the subject is too far away or too
close.
Flash charging time (page 145) depends on operating conditions (battery
condition, ambient temperature, etc.).
Shooting with flash turned off when lighting is dim results in a slow shutter speed,
which can cause image blur due to camera movement. Under such conditions,
secure the camera with a tripod, etc.
With red eye reduction, the flash is fired automatically in accordance with
exposure. It does not fire in areas where lighting is bright.
The presence of outdoor sunlight, fluorescent lighting, or some other light source
can cause abnormal image colors.
Select “Flash Off” for the flash setting when shooting in areas where flash
photograph is prohibited.
Red-eye Reduction
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the
eyes of people who are in the image. This is caused when the light from the flash
reflects off of the retina of the eye. When red-eye reduction is selected as the flash
mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the
image to close, which reduces the chance of red eye.
Note the following important points when using red-eye reduction.
Red-eye reduction does not work unless the people in the image are looking
directly at the camera (flash).
Red-eye reduction may not work very well if the subjects are located far away from
the camera.
Other Useful Flash Features
Changing the flash intensity (page 70)
37 Snapshot Tutorial
The face detection feature adjusts focus and brightness to the faces in the image.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the third Control Panel option from the top
(Face Detection).
3. Use [4] and [6] to select “G Face Detection: On” and then press
[SET].
4. Point the camera at the subject(s).
The camera will detect human faces and display a
frame around each one.
5. Half-press the shutter button.
The camera will focus and the frames around the
faces it focuses on will turn green.
6. Press the shutter button the rest of the way down.
Using Face Detection (Face Detection)
38 Snapshot Tutorial
Tips for Best Face Detection Results
The camera performs center focus if it cannot detect a face.
Always make sure that Auto Focus (AF) is selected as the focus mode when
shooting with face detection.
Face detection may take a bit longer when you hold the camera sideways.
Detection of the following types of faces is not supported.
Face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade
A profile or a face that is at an angle
A face that is very far away and small, or very close and large
A face in an area that is very dark
The face of a pet or some other non-human subject
IMPORTANT!
Face detection cannot be used in combination with any of the following features.
Some BEST SHOT scenes (Movie, For YouTube, Voice Recording)
easy Mode
The following functions are disabled when shooting with face detection.
Multi AF
39 Snapshot Tutorial
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject
movement or camera movement when shooting a moving subject using telephoto,
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the fourth Control Panel option from the top
(Anti Shake).
3. Use [4] and [6] to select the setting you want and then press [SET].
NOTE
ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen
when you half-press the shutter button while “Auto” is selected. These values will
appear briefly, however, in the preview image that is displayed immediately after
you shoot a snapshot.
If the flash fires, the Anti Shake icon S will remain on the display, even though
Anti Shake does not function during flash photography.
The ISO sensitivity setting (page 40) must be “AUTO” for Anti Shake to work.
Shooting with Anti Shake can cause an image to appear somewhat coarser than
normal and can cause slight deterioration of image resolution.
Anti Shake may not be able to eliminate the effects of camera or subject movement
when movement is severe.
Anti Shake is disabled during movie recording.
Reducing the Effects of Camera and Subject Movement
(Anti Shake)
Auto Minimizes the effects of hand and subject movement.
Off Turns off Anti Shake settings
40 Snapshot Tutorial
ISO sensitivity is a measure of sensitivity to light.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the fifth Control Panel option from the top
(ISO Sensitivity).
3. Use [4] and [6] to select the setting you want and then press [SET].
“AUTO” ISO sensitivity always is applied for movies, regardless of the current
ISO sensitivity setting.
You can adjust white balance to match the source of light available where you are
shooting and avoid the blue cast that results when shooting outdoors when it is
cloudy, and the green cast that results when shooting under fluorescent lighting.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the sixth Control Panel option from the top
(White Balance).
Specifying ISO Sensitivity (ISO)
AUTO Adjusts sensitivity automatically according to conditions
ISO 100 Lower sensitivity
Higher sensitivity
Slow shutter speed
Fast shutter speed
(Set for shooting in
dimly lit areas.)
Less noise
Some coarseness
(increased digital
noise)
ISO 200
ISO 400
ISO 800
ISO 1600
Adjusting White Balance (White Balance)
41 Snapshot Tutorial
3. Use [4] and [6] to select the shooting condition you want and then
press [SET].
When Auto WB” is selected for the white balance setting, the camera
automatically determines the white point of the subject. Certain subject colors
and light source conditions can cause problems when the camera tries to
determine the white point, which makes proper white balance adjustment
impossible. If this happens, select the white balance setting that matches your
shooting conditions (Daylight, Overcast, etc.)
Auto WB Configures the camera to adjust white balance automatically
Daylight For shooting outdoors on a clear day
Overcast For shooting outdoors on an overcast rainy day, in the
shade, etc.
Shade For shooting on a clear day in the shade of trees or buildings
Day White
Fluorescent For shooting under white or day white fluorescent lighting
Daylight
Fluorescent For shooting under daylight fluorescent lighting
Tungsten For shooting under light bulb lighting
Manual WB
For configuring the camera manually to suit a particular light
source.
1Select “· Manual WB”.
2Under the lighting conditions you plan
to use when shooting, point the camera
at a blank white piece of paper so it fills
the entire monitor screen and then
press the shutter button.
3Press [SET].
The white balance setting is retained even if you turn off the
camera.
¤
'
«
·
Blank white
paper
42 Snapshot Tutorial
You can manually adjust an image’s exposure value (EV value) before shooting it.
Exposure Compensation Range: –2.0EV to +2.0EV
Unit: 1/3EV
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the third Control Panel option from the
bottom (EV Shift).
3. Use [4] and [6] to adjust the exposure compensation value.
To cancel exposure compensation, change the
EV value to 0.0.
4. Press [SET].
This applies the exposure compensation
value. The exposure compensation value you
set remains in effect until you change it.
NOTE
When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
Correcting Image Brightness (EV Shift)
[6]: Increases the EV value. A higher EV
value is best for light-colored subjects
and backlit subjects.
[4]: Decreases the EV value. A lower EV
value is best for dark-color subjects and
for shooting outdoors on a clear day.
Exposure compensation value
43 Snapshot Tutorial
The easy mode eliminates troublesome setups and simplifies snapshot recording.
This mode is recommended for those who are new to digital imaging.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the second Control Panel option from the
bottom (easy Mode).
3. Use [4] and [6] to select “| On” and then press [SET].
This enters the easy mode.
4. Focus the image.
While the focus frame is aligned with the subject, half-press the shutter button.
5. Shoot the image.
When the image is focused, press the shutter button the rest of the way.
This records the snapshot.
.Using the easy Menu
The easy menu contains flash, self-timer, and image size settings, plus an item for
exiting the easy mode.
While the camera is in the easy mode, all the other settings (besides Flash, Self-
timer, Image Size, and easy Mode) on the REC tab menu (page 133) and Quality tab
menu (page 133) are fixed at preset optimum values. Any settings you configured on
these tabs are not used in the easy mode.
IMPORTANT!
To use the Set Up tab menu (page 134), you need to exit the easy mode. To do
this, select the “easy Mode” item in step 2 of the following procedure, and then
select l in step 3. After that, you can use the Set up tab menu as you normally
do.
Using the easy Mode
44 Snapshot Tutorial
1. Press [MENU].
The easy menu displays larger text than standard
menus.
2. Use [8] and [2] to select the menu item you
want, and then press [SET].
3. Use [8] and [2] to select the setting you want, and then press [SET].
An asterisk (*) indicates reset default settings.
See the following for details.
Flash (page 35)
Self-timer (page 62)
Image Size (page 32)
The following are the settings you can select for “easy Mode”.
On-screen pop-up help text provides a brief explanation of each setting.
Menu Item: Available Settings:
Flash > (Auto Flash)* / < (Flash On) / ? (Flash Off)
Self-timer (10-second self-timer) / l*
Image Size ;* / $ / !
easy Mode k / l*
Exit Menu Exit the easy menu
To do this: Select this
setting:
Stay in the easy mode, without switching to another
recording type k
Switch from the easy mode to a standard recording type l
45 Snapshot Tutorial
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the bottom Control Panel option (Date/Time).
Use [4] and [6] to select the date or time.
NOTE
You can select either of two display style (page 113) for the date: Month/Day or
Day/Month.
The time is displayed using 24-hour format.
Your camera provides you with 3X optical zoom (that changes the lens focal
distance), which can be used in combination with digital zoom (that digitally
processes the center portion of the image to enlarge it) for total zoom capabilities of
3X to 45.2X. The image deterioration point depends on the image size (page 47).
1. In the REC mode, press the zoom button to zoom.
2. Press the shutter button to shoot the image.
IMPORTANT!
Digital zoom is disabled while date stamping (page 112) is turned on.
Changing the Control Panel Date/Time Style
Shooting with Zoom
w (Wide Angle) : Reduces the size of the subject and broadens the range
z (Telephoto) : Enlarges the subject and narrows the range
w Wide Angle z Telephoto
Zoom button
46 Snapshot Tutorial
NOTE
The higher the digital zoom factor, the coarser the recorded image. Note that the
camera also has a function that lets you record using digital zoom without image
deterioration (page 46).
Use of a tripod is recommended to protect against image blur due to camera
movement when shooting with telephoto.
Performing a zoom operation changes the lens aperture.
Digital zoom only is available during movie recording. You can adjust the optical
zoom setting before you press the shutter button to start movie recording.
If you hold down the z (Telephoto) side of the zoom button, the zoom operation will
stop when the optical zoom factor reaches its maximum. Momentarily releasing the
zoom button and then holding down its z (Telephoto) side will switch to digital
zoom, which you can use to set an even higher zoom factor.
During zoom, a zoom bar on the monitor screen shows the current zoom setting.
Optical Zoom and Digital Zoom Switch Point
Image deterioration indicator
Zoom bar
Focusing range
(Displayed for Auto Focus, Macro Focus, and Manual
Focus.)
3X to 17.1X
Undeteriorated image quality range
1X 12X to 45.2X
Zoom pointer (Indicates current zoom.)
Image deterioration
Optical/digital zoom switch point
*3X optical zoom point
Deteriorated image quality range
47 Snapshot Tutorial
The image deterioration point
depends on the image size (page
32). The smaller the image size,
the higher the zoom factor you
can use before reaching the
image deterioration point.
Though digital zoom generally
causes a deterioration of image
quality, some digital zoom without
image deterioration is possible
with image sizes of “7M” and
smaller. The range in which you
can use digital zoom without
image deterioration is indicated
on the display. The deterioration
point depends on the image size.
Image
Size
Maximum
Zoom Factor
Undeteriorated
zoom limit
10M 12X 3X
3:2 12X 3X
16:9 12X 3X
7M 14.2X 3.6X
4M 18.7X 4.7X
2M 26.5X 6.8X
VGA 45.2X 17.1X
48 Recording Movie Images and Audio
Recording Movie Images and Audio
1. Configure the quality setting for the movie (page 68).
The length of the movie you can record will depend on the quality setting you
select.
2. In the REC mode, press [BS].
3. Use [8], [2], [4], and [6] to select the »
(Movie) scene and then press [SET].
This causes » to appear on the monitor screen.
4. Press the shutter button.
This will start recording and display Y on the
monitor screen.
Movie recording includes monaural audio.
5. Press the shutter button again to stop
recording.
Each movie can be up to 10 minutes long.
Movie recording stops automatically after 10 minutes of recording. Movie
recording also will stop automatically if memory becomes full before you stop
movie recording by pressing the shutter button.
To record a movie
Recording time
Remaining recording time
(page 143)
49 Recording Movie Images and Audio
NOTE
Spending a long time using movie recording will cause the camera to become
slightly warm to the touch. This is normal and does not indicate malfunction.
The camera also records audio. Note the following points when shooting a movie.
Take care that the microphone is not blocked by your fingers,
etc.
Good recording results are not possible when the camera is
too far away from what you are trying to record.
Operating camera buttons while shooting can cause button
noise to be picked up in the audio.
Shooting a very bright subject can cause a vertical band to
appear in the monitor screen image. This does not indicate
malfunction. The band will not be recorded in a snapshot, but will be recorded in
the case of a movie.
Use of certain types of memory cards increase the time it takes to record movies,
which can cause movie frames to be lost. This condition is indicated by » and Y
flashing on the monitor screen. To avoid loss of movie frames, use of a memory
card with a maximum transfer speed of at least 10MB per second is recommended
(page 131).
Only digital zoom can be used for zooming during movie recording. Since optical
zoom is not possible while recording a movie, zoom as required before pressing
the shutter button to start recording.
The effects of camera movement in an image become more pronounced when you
shoot close up or with a large zoom factor. Because of this, use of a tripod is
recommended under these conditions.
Microphone
50 Recording Movie Images and Audio
Voice Recording lets you record audio only, without a snapshot or movie.
For information about Voice Recording capacities, see page 143.
1. In the REC mode, press [BS].
2. Use [8], [2], [4], and [6] to select the ` (Voice Recording) scene
and then press [SET].
This causes ` to appear on the monitor screen.
3. Press the shutter button to start recording.
The back lamp flashes green while recording
is in progress.
Pressing [SET] during recording will insert a
marker into the recording. During playback,
you will be able to jump to the markers in the
recording.
4. Press the shutter button again to stop
audio recording.
To create another audio recording file, repeat
steps 3 and 4.
To turn off Voice Recording, press [BS] and then select t (Auto).
NOTE
You can use [8] (DISP) during audio recording to toggle the monitor screen on
and off.
When monitor screen contents are turned off, selecting the “Voice Recording”
scene will cause the monitor screen to turn off immediately (page 118).
About audio data
Audio files can be played back on a computer using Windows Media Player or
QuickTime (pages 93, 101)
Audio Data: WAVE/IMA-ADPCM (WAV extension)
Recording Audio Only (Voice Recording)
Recording time
Remaining recording time
51 Recording Movie Images and Audio
1. In the PLAY mode, use [4] and [6] to display
the Voice Recording file you want to play.
` is displayed in place of an image for a Voice
Recording file.
2. Press [SET] to start playback.
Voice Recording Playback Controls
To play back an audio recording
Fast forward/fast reverse [4] [6]
Play/pause [SET]
Jump to marker
While playback is paused, press [4] or [6] to
jump to the next marker and then press [SET]
to resume playback.
Volume adjustment Press [2] and then press [8] [2]
Monitor screen on/off [8] (DISP)
Playback end [MENU]
52 Using BEST SHOT
Using BEST SHOT
BEST SHOT provides you with a collection of sample “scenes” that show a variety of
different types of shooting conditions. When you need to change the setup of the
camera, simply find the scene that matches what you are trying to achieve, and the
camera sets up for it automatically. This helps to minimize the chance of ruined
images due to poor exposure and shutter speed settings.
1. In the REC mode, press [BS].
This will display a menu of BEST
SHOT scenes.
The initial default selection is
t (Auto).
2. Use [8], [2], [4], and [6] to
move the boundary to the
scene you want to select.
The scene menu has multiple
pages. Use [8] and [2] to
scroll between menu pages.
You can access information
about the currently selected
scene. See page 53 for details.
To return to normal snapshot recording, select Scene 1 t (Auto). Pressing
[MENU] while the scene selection screen or scene information screen is
displayed will cause the boundary to jump directly to t (Auto).
What is BEST SHOT?
Some Sample Scenes
Portrait Scenery Night Scene Night Scene Portrait
To shoot an image with BEST SHOT
Currently selected scene
(with boundary)
Scene number
Scene name
[BS]
53 Using BEST SHOT
3. Press [SET] to configure the camera with the settings for the currently
selected scene.
This returns to the REC mode.
The settings of the scene you selected remain in effect until you select a
different scene.
To select a different BEST SHOT scene, repeat the above procedure from
step 1.
4. Press the shutter button.
NOTE
The BEST SHOT YouTube scene sets up the camera for recording movies that are
optimized for uploading to YouTube. Movies recorded with the YouTube scene are
stored in a special folder to make them easy to locate for uploading (page 105).
Maximum recording time while the YouTube scene is selected is 10 minutes.
.Using Scene Information Screen
To find out more about a scene, select it with the
boundary on the scene selection screen, and then press
the zoom button.
To return to the scene menu, press the zoom button
again.
To scroll between scenes, use [4] and [6].
To configure the camera with the settings for the
currently selected scene, press [SET]. To return to the
scene information screen for the currently selected BEST SHOT scene, press [BS].
54 Using BEST SHOT
.BEST SHOT Precautions
Some scenes like Night Scene and Fireworks result in a slow shutter speed setting.
Since a slow shutter speed increases the chance of digital noise in the image, the
camera automatically performs a digital noise reduction process when either of
these scenes is selected. This means that it will take a bit longer for the image to
be saved which is indicated by the back lamp flashing green. Do not perform any
key operation during that time. Also, it is a good idea to use a tripod to avoid image
blur due to camera movement when shooting at slow shutter speeds.
Your camera includes a sample scene that optimizes settings for auction site
images. Depending on your camera model, the sample scene is named either “For
eBay” or “Auction”. Images you record using the auction site sample scene are
stored in a special folder so you can easily find them on your computer (page 105).
High Sensitivity
The high sensitivity setting is disabled whenever the camera’s flash fires.
High sensitivity may not produce the desired results in very dark conditions.
When shooting with slow shutter speeds, use a tripod to protect against blurring
due to camera movement.
Under certain lighting conditions, the camera will perform an automatic noise
filtering operation to reduce digital noise in the image. This operation causes the
camera to take longer than normal to save the image and be ready for the next
shot.
BEST SHOT scene images were not shot using this camera.
Images shot using a BEST SHOT scene may not produce the results you expected
due to shooting conditions and other factors.
You can modify the camera settings that are made after you select a BEST SHOT
scene. Note, however, that the BEST SHOT settings revert to their defaults when
you select another BEST SHOT scene or turn off the camera.
55 Advanced Settings
Advanced Settings
The following are menu operations you can use to configure various camera settings.
You also can use the Control Panel (page 31) to configure some of the settings that
appear on the menu screen. Refer to the page references provided in this section
for information about configuring settings using the Control Panel.
.Example Menu Screen Operation
Press [MENU] to display the menu screen.
Menu contents are different in the REC mode and PLAY mode.
Menu Screen Operation Buttons
1. In the REC mode, press [MENU].
This will display the menu screen.
2. Use [4] and [6] to select the tab where the item you want to configure
is located.
Using On-screen Menus
[4] [6]Selects tabs. [6] is also used to display the options available for a
setting.
[8] [2]Selects a setting option.
[SET] Registers the selected setting.
[MENU] Exits the menu screen.
Example: REC mode menu
[MENU] [SET]
[8] [2] [4] [6]
56 Advanced Settings
3. Use [8] and [2] to select the menu item
you want, and then press [6].
4. Use [8] and [2] to change the setting.
5. After the setting is the way you want,
press [SET].
Pressing [4] registers the selected setting and
returns to the menu.
To configure settings on another tab after
pressing [4] to return to the menu, use [8] to
move the highlighting up to the tabs, and then
use [4] and [6] to select the tab you want.
.Menu Operations in This Manual
Menu operations are represented in this manual as shown below. The following
operation is the same one described under “Example Menu Screen Operation” on
page 55.
Settings
Example:
When “Focus” is selected on
the “REC” tab
Tabs
Procedure
[r] (REC) * [MENU] * REC Tab * Focus
Use [4] and [6] to select the “REC” tab.
Use [8] and [2] to select the “Focus”
and then press [6].
Press [MENU].Press [r] (REC).
57 Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Focus
*1 The focus range is the distance from the lens surface.
*2 During movie recording, the Auto Focus mode is disabled.
*3 The minimum changes along with the optical zoom setting.
*4 The distance depends on shooting conditions, and appears on the monitor screen
when the shutter button is half-pressed.
REC Mode Settings (REC)
Selecting a Focus Mode (Focus)
Settings Type of Shot Focus Mode Approximate Focus Range*1
Snapshot Movies Snapshot Movies
Q Auto
Focus
General
recording Automatic *2
Approximately
40 cm to 9
(infinity) (1.3' to 9)
*2
´
Macro Close ups Automatic Fixed
focal
point
Approximately
15 cm to 50 cm
(5.9" to 19.7")Fixed
distance
*3, *5
E
Pan
Focus
Shooting with a
relatively wide
focus range
Fixed
focal point Fixed distance*3, *4
)
Infinity
Scenery and
other distant
subjects
Fixed Infinity
W
Manual
Focus
When you want
to focus
manually
Manual Approximately 15 cm to 9
(infinity)*3 (5.9" to 9)
58 Advanced Settings
*5 (m)
NOTE
Above values are for reference only.
For movie macro, the focus range is a few centimeters within the center distance.
Normal Macro
Zoom Steps Close Up Telephoto Center distance
Z1 (Wide) Approx. 2.0 (6.6')90.40 (15.7")
2 Approx. 2.7 (8.9') 90.40 (15.7")
3 Approx. 4.0 (13.1') 90.40 (15.7")
4 Approx. 5.0 (16.4') 90.40 (15.7")
5 Approx. 5.6 (18.4') 90.40 (15.7")
6 Approx. 7.3 (24.0') 90.40 (15.7")
7 (Tele) Approx. 8.0 (26.2') 90.40 (15.7")
59 Advanced Settings
To focus with manual focus
1. On the monitor screen, compose the image so
the subject you want to focus on is within the
yellow boundary.
2. Watching the image on the monitor screen use
[4] and [6] to adjust focus.
At this time the image that is within the boundary
will enlarge and fill the monitor screen, which aids
in focusing. If you do not perform any operation for
two seconds while the enlarged image is displayed,
the screen in step 1 will re-appear.
NOTE
An Auto Macro feature detects how far the subject is from the lens and
automatically selects either Macro Focus or Auto Focus accordingly.
Use of the flash together with Macro Focus can cause the light of the flash to
become blocked, which may result in unwanted lens shadows in your image.
Auto Macro can be used when recording snapshots only.
Whenever you perform an optical zoom operation while shooting with Auto Focus,
Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell
you the focus range, as shown below.
Example: oo cm to 9
*oo is the actual focusing range value.
The operations assigned to the [4] and [6] keys with the “L/R Key” setting (page
64) are disabled while Manual Focus is selected as the focus mode.
Yellow boundary
60 Advanced Settings
Using Focus Lock
“Focus lock” is a technique you can use when you want
to compose an image in which the subject you want to
focus on is not within the focus frame in the center of the
screen.
To use focus lock, select “U Spot” for the Auto
Focus area (page 63).
1. Align the monitor screen’s focus frame with
the subject you want to focus on and then
half-press the shutter button.
2. Keeping the shutter button half-pressed
(which maintains the focus setting), move the
camera to compose the image.
3. When you are ready to shoot the image,
press the shutter button the rest of the way
down.
NOTE
Focus lock also locks exposure (AE).
Subject to be focused on
Focus frame
61 Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * CS
While Continuous Shutter is turned on, images are continually recorded until memory
becomes full, as long as you keep the shutter button depressed.
Releasing the shutter button stops shooting.
NOTE
With continuous shutter, exposure and focus for the first image are applied for
successive images as well.
Continuous shutter cannot be used in combination with any of the following.
Some BEST SHOT scenes (Movie, For YouTube, Voice Recording)
easy Mode
When using a continuous shutter mode, keep the camera still until all recording is
finished.
The continuous shutter rate depends on the current image size and image quality
settings.
The speed of Continuous Shutter depends on the type of memory card loaded in
the camera and the amount of free space available for storage. When shooting to
built-in memory, continuous shutter shooting is relatively slow.
You cannot use the self-timer in combination with Continuous Shutter.
Using Continuous Shutter (CS)
62 Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Self-timer
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
The front lamp flashes while the Self-timer countdown is in
progress.
You can interrupt an ongoing Self-timer countdown by
pressing [SET].
NOTE
The Self-timer cannot be used together with the following features.
Continuous Shutter, certain BEST SHOT scene (Voice Recording)
The Triple Self-timer cannot be used together with the following feature.
BEST SHOT scenes (Movie, For YouTube)
easy Mode
Using the Self-timer (Self-timer)
10 sec 10-second Self-timer
2 sec
2-second Self-timer
When shooting under conditions that slow down the shutter speed,
you can use this setting to prevent image blur due to camera
movement.
X3
(Triple
Self-timer)
Shoots three images: one image 10 seconds after the shutter button is
pressed, and the next two images as soon as the camera is ready
after shooting the previous image. How long it takes for the camera to
get ready to shoot depends on the image size and quality settings,
whether or not a memory card is loaded in the camera, and the flash
charge condition.
Off Turns off the Self-timer.
Front lamp
63 Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Face Detection
For details, see the Control Panel procedure on page 37.
Procedure
[r] (REC) * [MENU] * REC Tab * Anti Shake
For details, see the Control Panel procedure on page 39.
Procedure
[r] (REC) * [MENU] * REC Tab * AF Area
•“
I Multi” cannot be selected for the Auto Focus area while you are using Face
Detection (page 37).
Shooting with Face Detection (Face Detection)
Reducing the Effects of Camera and Subject Movement
(Anti Shake)
Specifying the Auto Focus Area (AF Area)
Spot This mode takes readings of a small area in the center of the image.
This setting works well with focus lock (page 60).
Multi
When you half-press the shutter button while this setting selected, the
camera will select the optimum Auto Focus area from among nine
possible areas. The focus frame of the area where the camera focuses
will be displayed in green.
U
I
U Spot” I Multi”
Focus frame Focus frame
64 Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * easy Mode
For details, see the Control Panel procedure on page 43.
Procedure
[r] (REC) * [MENU] * REC Tab * L/R Key
You can assign one of the five functions listed below to the [4] and [6] keys.
Procedure
[r] (REC) * [MENU] * REC Tab * Grid
The on-screen grid can be displayed on the REC mode
monitor screen for easy vertical and horizontal alignment
when composing images.
Using the easy Mode (easy Mode)
Assigning Functions to the [4] and [6] Keys (L/R Key)
Setting [4]/[6] key operation
Metering Changes the Metering Mode (page 69)
EV Shift Adjusts the EV shift value (page 42)
White Balance Changes the white balance setting (page 68)
ISO Changes the ISO Sensitivity setting (page 40)
Self-timer Sets the self-timer time (page 62)
Off Cancels [4] and [6] key assignments
Displaying the On-screen Grid (Grid)
65 Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Digital Zoom
You can use this setting to turn digital zoom on or off. When digital zoom is turned off,
operating the zoom button zooms the image with optical zoom only.
Procedure
[r] (REC) * [MENU] * REC Tab * Review
While Review is turned on, the camera will display a image for about one second
immediately after you press the shutter button to record it.
Procedure
[r] (REC) * [MENU] * REC Tab * Icon Help
While Icon Help is turned on, a textual description will appear on the display for
certain icons when you switch between REC functions.
Functions Supported by Icon Help
REC Mode, Flash, Metering Mode, White Balance, Self-timer, EV Shift
Turning Digital Zoom On or Off (Digital Zoom)
Turning on Image Review (Review)
Using Icon Help (Icon Help)
66 Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * Memory
When you turn off the camera, it remembers the current settings of all enabled
memory items and restores them when you turn it back on. Any memory item that is
disabled will be returned to its initial default setting whenever you turn off the camera.
*Optical zoom setting only.
If you turn the camera power off and then back on while the BEST SHOT memory
item is enabled, all of the other memory items (except for zoom position) are
initialized to the currently selected BEST SHOT sample scene setup, regardless of
the enabled/disabled status of the other memory items.
Configuring Power On Default Settings (Memory)
Setting Disabled (Initial Default Setting) Enabled
b BEST SHOT Snapshot (Auto)
Setting at
power off
Flash Auto
Focus AF (Auto Focus)
White Balance Auto
ISO Auto
AF Area Spot
Metering Multi
CS Off
Self-timer Off
Flash Intensity 0
Digital Zoom On
MF Position Position before manual focus was selected.
Zoom Position*Full wide
67 Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * Size
For details, see the Control Panel procedure on page 34.
Procedure
[r] (REC) * [MENU] * Quality Tab * t Quality (Snapshot)
The “Fine” setting helps to bring out details when shooting a finely detailed image
of nature that includes dense tree branches or leaves, or an image of a complex
pattern.
Memory capacity (the number of images you can record) will be affected by the
quality settings you configure (page 142).
Image Quality Settings (Quality)
Specifying Snapshot Size (Size)
Specifying Snapshot Image Quality (Quality (Snapshot))
Fine Gives image quality priority
Normal Normal
Economy Gives number of images priority
68 Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * » Quality (Movie)
Movie image quality is a standard that determines the detail, smoothness, and clarity
of a movie during playback. Shooting with the high-quality (WIDE) setting will result in
better image quality, but it also shortens the amount of time you can shoot.
Memory capacity (Movie recording time you can shoot) will be affected by the
quality settings you configure (page 143).
Procedure
[r] (REC) * [MENU] * Quality Tab * EV Shift
For details, see the Control Panel procedure on page 42.
Procedure
[r] (REC) * [MENU] * Quality Tab * White Balance
For details, see the Control Panel procedure on page 40.
Specifying Movie Image Quality (Quality (Movie))
Image Quality (Pixels) Approximate Data Rate Frame Rate
WIDE 848x480 12.5 Megabits/second 30 frames/second
STD 640x480 10.6 Megabits/second
LP 320x240 2.7 Megabits/second 15 frames/second
Correcting Image Brightness (EV Shift)
Controlling White Balance (White Balance)
69 Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * ISO
For details, see the Control Panel procedure on page 40.
Procedure
[r] (REC) * [MENU] * Quality Tab * Metering
The metering mode determines what part of the subject is metered for exposure.
The currently selected metering mode is indicated by an icon on the snapshot
screen. No icon is displayed when “B Multi” is selected as the metering mode.
Procedure
[r] (REC) * [MENU] * Quality Tab * Color Filter
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple
Specifying ISO Sensitivity (ISO)
Specifying the Metering Mode (Metering)
Multi
Multi-pattern metering divides the image into sections and
measures the light in each section for a balanced exposure reading.
This type of metering provides error-free exposure settings for a
wide range of shooting conditions.
Center
Weighted
Center weighted metering concentrates on the center of the focus
area to measure light. This type of metering is best when you want
some level of control over contrast.
Spot
Spot metering takes readings at a very small area. Use this
metering method when you want exposure to be set according to
the brightness of a particular subject, without being affected by
surrounding conditions.
Using Built-in Color Filters (Color Filter)
B
N
˜
70 Advanced Settings
Procedure
[r] (REC) * [MENU] * Quality Tab * Sharpness
You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp).
Procedure
[r] (REC) * [MENU] * Quality Tab * Saturation
You can specify one of five saturation settings from +2 (most saturated) to –2 (least
saturated).
Procedure
[r] (REC) * [MENU] * Quality Tab * Contrast
You can specify one of five contrast settings from +2 (most contrast between light and
dark) to –2 (least contrast between light and dark).
Procedure
[r] (REC) * [MENU] * Quality Tab * Flash Intensity
You can specify one of five flash intensity settings from +2 (strongest) to –2
(weakest).
Flash intensity may not change when the subject is too far away or too close.
Controlling Image Sharpness (Sharpness)
Controlling Color Saturation (Saturation)
Adjusting Image Contrast (Contrast)
Specifying Flash Intensity (Flash Intensity)
71 Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 28 for the procedure for viewing snapshots.
1. Press [p] (PLAY) and then use [4] and [6] to display the movie you
want to view.
2. Press [SET] to start
playback.
Movie Playback Controls
Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots
Viewing a Movie
Fast forward/
fast reverse
[4] [6]
Each press of either button increases the speed of the fast
forward or fast reverse operation.
To return to normal playback speed, press [SET].
Play/pause [SET]
1 frame forward/
back
[4] [6]
Holding down either button scrolls continuously.
Volume
adjustment
Press [2] and then press [8] [2]
Volume can be adjusted only while movie playback is in
progress.
Information
display on/off [8] (DISP)
Zoom
Press the zoom button z ([).
You can use [8], [2], [4], and [6] to scroll the zoomed
image on the monitor screen. You can zoom a movie image
up to 4.5 times normal size.
Stop playback [MENU]
Movie icon: »
Image quality
Recording time
72 Viewing Snapshots and Movies
1. In the PLAY mode, use [4] and [6] to scroll through the images until
the one you want is displayed.
2. Press the zoom button z ([) to zoom.
You can use [8], [2], [4], and [6] to scroll the
zoomed image on the monitor screen. Press the
zoom button w to unzoom the image.
If display indicators are turned on, an indicator
in the lower right corner of the monitor screen
shows what part of the zoomed image is
currently displayed.
To exit the zoom screen, press [MENU] or
[BS].
Though the maximum image zoom factor is
8X, certain image sizes may not allow zooming
up to the full 8X.
1. In the PLAY mode, press the zoom button w
(]).
Use [4] and [6] to scroll, 12 images at a time.
To view a particular image, use [8], [2], [4], or [6]
to move the selection boundary to the image you
want and then press [SET].
Zooming an On-screen Image
Displaying 12 Images on the Same Screen
Image area
Current display area
Zoom factor
Boundary
73 Viewing Snapshots and Movies
1. Use the AV cable that comes with the camera to connect it to the TV.
Make sure that you insert the cable connector into the
USB/AV port until you feel it click securely into place.
Failure to insert the connector fully can result in poor
communication or malfunction.
Note that even while the connector is fully inserted,
you still will be able to see the metal part of the connector as shown in the
illustration.
2. Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
3. Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing
on the camera’s monitor screen.
Pressing [ON/OFF] or [r] (REC) will not turn on the camera while the AV
cable is connected.
You also can change the aspect ratio of the screen and the video output
system (page 116).
Viewing Snapshots and Movies on a TV Screen
TV
Yellow AV cable (bundled)
USB/AV port
White
Making sure that the 6 mark on the camera is aligned with the 4 mark of the
AV cable connector, connect the cable to the camera.
AudioVideo
VIDEO IN jack (yellow)
AUDIO IN jacks (white)
74 Viewing Snapshots and Movies
4. Now you can display images and play back movies as you normally do.
IMPORTANT!
Before connecting to a TV to display images, be sure to configure the camera’s
[r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 115).
Audio is initially output by the camera at maximum volume. When you first start
displaying images, set the TV volume control at a relatively low level and then
adjust it as required.
NOTE
Audio is monaural.
Certain TVs may cut off part of the images.
All icons and indicators that appear on the monitor screen also appear on the TV
screen. You can use [8] (DISP) to change the display contents.
Recording Camera Images to a DVD Recorder or Video Deck
Use one of the following methods to connect the camera to the recording device
using the camera’s bundled AV cable.
DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals.
Camera: USB/AV port
You can play a slideshow of snapshots and movies on the camera and record it on a
DVD or video tape. When recording images to an external device, use [8] (DISP) to
clear all indicators from the monitor screen (page 107).
For information about connecting a monitor to the recording device and about how to
record, see the user documentation that comes with the recording device you are
using.
75 Other Playback Functions (PLAY)
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform
other playback operations.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow
To stop the slideshow, press [SET]. Pressing [MENU] instead of [SET] stops the
slideshow and returns to the menu screen.
Adjust audio volume by pressing [2] and then press [8] or [2] during playback.
All button operations are disabled while the slideshow is transitioning from one
image to another.
The time required for transition from one image to another may be longer in the
case of an image that was not recorded with this camera.
For information about menu operations, see page 55.
Playing a Slideshow on the Camera (Slideshow)
Start Starts the slideshow
Time Time from the start to the end of the slideshow
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
Interval
Amount of time each image remains displayed
Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”.
If you specify a value from 1 to 30 seconds, images change at the
specified interval, but the audio portion of movies and audio snapshots
will continue to play until the end.
When the slideshow reaches a movie file while “MAX” is selected, only
the first frame of the movie will displayed. Voice Recording files are not
played back when “MAX” is selected.
Effect
Turns effect on or off.
On: Turns on the image change effect and background music.
Off: No image change effect or background music
76 Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
DPOF Printing
See page 84 for details.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Protect
IMPORTANT!
Note that even if a file is protected, it will be deleted if you perform the format
operation (page 117).
Selecting Images for Printing (DPOF Printing)
Protecting a File Against Deletion (Protect)
On
Protects specific files.
1Use [4] and [6] to scroll through the
files until the one you want to protect is
displayed.
2Use [8] and [2] to select “On” and
then press [SET].
An image that is protected is indicated
by the icon.
3To protect other files, repeat steps 1 and 2.
To exit the protect operation, press [MENU]. To unprotect a file,
select “Off” instead of “On” in step 2 above.
All Files:
On
Protects all files.
1Use [8] and [2] to select “All Files: On” and then press [SET].
2Press [MENU].
To unprotect all files, select “All Files: Off” instead of “All Files: On” in
step 1 above.
77 Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Rotation
1. Use [8] and [2] to select “Rotation and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2. When the displayed image is at the orientation you want, press
[MENU].
NOTE
Note that this procedure does not actually change the image data. It simply alters
how the image is displayed on the camera’s monitor screen.
An image that has been protected or zoomed and movie screen cannot be rotated.
The original (unrotated) version of the image will be displayed on the 12-image
screen.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot.
The original snapshot is also retained. You can select resize an image to one of three
image sizes: 7M, 4M, VGA.
Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of
4:3, with both sides cut off.
The recording date of the resized version of the snapshot will be the same as the
recording date of the original snapshot.
Rotating an Image (Rotation)
Resizing a Snapshot (Resize)
78 Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Trimming
You can crop a snapshot to trim parts you do not need,
and save the result in a separate file. The original
snapshot is also retained.
Use the zoom button to zoom the image to the size
you want, use [8], [2], [4], and [6] to display the
portion of the image you want to cut out, and then
press [SET].
The image produced by cropping a 3:2 or 16:9
image will have an aspect ratio of 4:3.
The recording date of the cropped image will be the
same as the recording date of the original snapshot.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Dubbing
You can add audio to a snapshot after you shoot it. You can re-record a snapshot’s
audio whenever you want. You can record up to about 30 seconds of audio for a
single snapshot.
1. Press the shutter button to start audio
recording.
Cropping a Snapshot (Trimming)
Adding Audio to a Snapshot (Dubbing)
Represents
snapshot area
Part of snapshot that is
currently displayed
Zoom factor
Remaining recording time
79 Other Playback Functions (PLAY)
2. Press the shutter button again to stop audio
recording.
Take care that you do not block the camera’s microphone
with your fingers while recording.
Good recording results are not possible when the camera
is too far away from what you are trying to record.
Your camera supports the following audio data formats.
Audio Format: WAVE/IMA-ADPCM (WAV extension)
Adding audio (dubbing) is not possible for the following types of images.
Protected images
To delete audio, perform the following operation:
Dubbing * Delete * [SET] * [MENU].
IMPORTANT!
Note that you cannot restore the original audio of an Audio Snapshot after you
delete or re-record it.
1. In the PLAY mode, use [4] and [6] to scroll through the images until
the Audio Snapshot you want is displayed.
An audio snapshot is one that has a ˆ icon.
2. Press [SET] to start playback.
Voice Recording Playback Controls
Audio of an Audio Snapshot also can be played back on a computer using
Windows Media Player or QuickTime (pages 93, 101).
To play snapshot audio
Fast forward/fast reverse [4] [6]
Play/pause [SET]
Volume adjustment Press [2] and then
press [8] [2]
Display content switching [8] (DISP)
Stop playback [MENU]
Microphone
80 Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Copy
Files can be copied from the camera’s built-in memory to a memory card or from a
memory card to built-in memory.
NOTE
You can copy snapshots, movies, audio snapshots, or Voice Recording files you
recorded with this camera.
Copying Files (Copy)
Built-in * Card
Copies all files from built-in camera memory to a memory card.
This option copies all the files in built-in camera memory. It
cannot be used to copy a single file.
Card * Built-in
Copies a single file on the memory card to camera built-in
camera memory. Files are copied to the folder in built-in
memory whose name has the largest serial number.
1Use [4] and [6] to select the file you want to copy.
2Use [8] and [2] to select “Copy” and then press [SET].
81 Printing
Printing
You can specify which images you want to print, the number of copies, and date
stamp settings before printing (page 84).
Printing Snapshots
Professional Print Service
You can take a memory card that contains the images you
want to print to a professional print service and have them
printed.
Printing on a Home Printer
Printing Images on a Printer with Memory Card Slot
You can use a printer equipped with a memory card slot to print
images directly from a memory card. For details, see the user
documentation that comes with your printer.
Connecting Directly to a PictBridge Compatible
Printer
You can print on a printer that supports PictBridge (page
82).
Printing with a Computer
After transferring the images to your computer, use
commercially available software to print.
82 Printing
You can connect the camera directly to a printer that supports PictBridge and print
images without going through a computer.
.To set up the camera before connecting to a printer
1. Turn on the camera and press [MENU].
2. On the “Set Up” tab, select “USB” and then press [6].
3. Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
.Connecting the Camera to a Printer
Use the USB cable that
comes bundled with the
camera to connect the
camera to your printer’s
USB port.
The camera does not
draw power over the USB
cable. Make sure the
camera’s battery is
sufficiently charged
before connecting.
Make sure that you insert
the cable connector into
the USB/AV port until you
feel it click securely into
place. Failure to insert the
connector fully can result
in poor communication or
malfunction.
Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
When connecting the USB cable to a USB port, make
sure you align the connector correctly with the port.
Connecting Directly to a PictBridge Compatible Printer
USB
USB cable
USB port
USB/AV port
Making sure that the 6 mark on the camera is aligned
with the 4 mark of the USB cable connector, connect
the cable to the camera.
Large connector
Small connector
83 Printing
.To print
1. Turn on the printer and load paper.
2. Turn on the camera.
This will display the print menu screen.
3. Use [8] and [2] to select “Paper Size”, and
then press [6].
4. Use [8] and [2] to select a paper size and
then press [SET].
The following are the available paper sizes.
3.5"x5", 5"x7", 4"x6", A4, 8.5"x11", By Printer
Selecting “By Printer” prints using a paper size selected on the printer.
See the documentation that comes with your printer for information about
paper settings.
5. Use [8] and [2] to specify the print option you want.
To toggle date stamping on and off, press [BS].
The date stamp will be printed when “On” is
indicated on the monitor screen.
6. Use [8] and [2] to select “Print” and then
press [SET].
Printing will start and the message “Busy... Please
wait...” will appear on the monitor screen. The message will disappear after a
short while, even though printing is still being performed. Pressing any camera
button will cause the printing status to re-appear. The print menu screen will re-
appear when printing is complete.
If you selected “1 Image”, you can repeat the procedure from step 5, if you
want.
7. After printing is complete, turn off the camera and disconnect the USB
cable from the printer and camera.
1 Image : Prints one image. Select and then press [SET]. Next, use [4] and
[6] to select the image you want to print.
DPOF Printing : Prints multiple images. Select and then press [SET]. With this
option, images will be printed in accordance with DPOF settings
(page 84).
84 Printing
.Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy,
and time stamp on/off information on the memory card with the images.
After configuring settings, you can use the memory card to print on a home
printer that supports DPOF or take the memory card to a professional print
service.
Whether or not you will be able to use DPOF settings for printing depends on the
printer you are using.
Some professional print services may not support DPOF.
.Configuring DPOF Settings Individually for Each Image
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
DPOF Printing * Select images
1. Use [4] and [6] to scroll through the files until the image you want to
print is displayed.
2. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
If you want to include the date in the images, press [BS] so “On” is shown for
date stamping.
Repeat steps 1 and 2 to configure settings for other images, if you want.
3. Press [SET].
Using DPOF to Specify Images to be Printed and the Number
of Copies
85 Printing
.Configuring the Same DPOF Settings for All the Images
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
DPOF Printing * All images
1. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
If you want to include the date in the images, press [BS] so “On” is shown for
date stamping.
2. Press [SET].
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF
settings you configured for the images. To clear DPOF settings, specify “00” for the
number of copies of all images.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be sure to tell them that it
includes DPOF settings for the images to be printed and the number of copies. If you
don’t, the print service may print all the images without regard to your DPOF settings,
or they may ignore your date stamp setting.
86 Printing
.Date Stamping
You can use one of the following three methods to include the recording date in the
printout of an image.
.Standards Supported by the Camera
PictBridge
This is a standard of the Camera and Imaging Products Association
(CIPA). You can connect the camera directly to a printer that supports
 PictBridge, and perform image selection and printing using the
camera monitor screen and controls.
•Exif Print
Printing on a printer that supports Exif Print (Exif 2.2) uses
information about shooting conditions recorded with the image to
enhance printed image quality. Contact your printer manufacturer
for information about models that support Exif Print, printer upgrades, etc.
Configuring
camera settings
Configure DPOF settings (page 84).
You can turn date stamping on and off each time you print.
You can configure settings so some images include the date
stamp and some don’t.
Configure the Camera’s Time Stamp setting (page 112).
The camera’s Time Stamp setting imprints the date into a
snapshot when you shoot it, so the date is always included
when you print. It cannot be deleted.
Do not turn on DPOF date stamping for an image that
includes a date stamped with the camera’s Time Stamp
function. Doing so can cause the two stamps to be
overprinted.
Configuring
computer settings
You can use commercially available image management
software to date stamp images.
Professional print
service
Request date stamping when ordering prints from a
professional print service.
87 Using the Camera with a Computer
Using the Camera with a Computer
You can perform the operations described below while the camera is connected to a
computer.
*Windows only
The procedures you need to perform when using the camera with your computer and
when using the bundled software are different for Windows and the Macintosh.
Things you can do using a computer...
Save images to a
computer and
view them there
Save images and view them manually (USB
connection) (pages 89, 98).
Transfer images to a computer
automatically over a wireless LAN for
viewing (Eye-Fi) (page 103).
Transfer images
stored on your
computer to
camera memory
In addition to images, you also can transfer
screen shot images from your computer to the
camera (Photo Transport*) (page 95).
Playback and
edit movies
You can play back movies (pages 93, 101).
To edit movies, use commercially available
software as required.
Windows users should refer to “Using the Camera with a Windows Computer”
on page 88.
Macintosh users should refer to “Using the Camera with a Macintosh” on page
98.
88 Using the Camera with a Computer
Install the required software in accordance with the version of Windows you are
running and what you want to do.
*YouTube Uploader for CASIO and Photo Transport will not run under 64-bit versions of
Windows Vista.
Using the Camera with a Windows Computer
When you want
to do this:
Operating System
Version Install this software: See
page:
Save images to a
computer and
view them there
manually
Vista / XP / 2000 Installation not required. 89
Play movies Vista / XP / 2000
Installation not required.
Windows Media Player,
which is already installed on
most computers, can be used
for playback.
If your computer is running
Windows 2000 and does not
have DirectX9.0c or higher
installed, download DirectX
from the Microsoft DirectX
site and install it on your
computer.
93
Edit movies Vista / XP / 2000
Use commercial software as
required.
Upload movie
files to YouTube
Vista / XP (SP2/SP3) /
2000 (SP4)
YouTube Uploader for
CASIO*93
Transfer images
to the camera Vista / XP / 2000 Photo Transport 1.0*95
View the User’s
Guide
Vista / XP (SP2/SP3) /
2000 (SP4)
Adobe Reader 8
(Not required if already
installed.)
97
89 Using the Camera with a Computer
.Computer System Requirements for Bundled Software
Computer system requirements are different for each of the applications. See the
“Read me” file that comes with each application for details. Information about
computer system requirements also can be found under “Computer System
Requirements for Bundled Software” on page 132 of this manual.
.Precautions for Windows Users
Except for Adobe Reader, the bundled software requires Administrator privileges to
run.
Operation on a self-made computer is not supported.
Operation may not be possible under certain computer environments.
You can connect the camera to your computer in order to view and store images
(snapshot and movie files).
.To connect the camera to your computer and save files
1. Turn on the camera and press [MENU].
2. On the “Set Up” tab, select “USB” and then press [6].
3. Use [8] and [2] to select “Mass Storage”, and then press [SET].
Viewing and Storing Images on a Computer
90 Using the Camera with a Computer
4. Turn off the camera and
then use the USB cable
that comes with the
camera to connect it to
your computer.
The camera does not
draw power over the
USB cable. Make sure
the camera’s battery is
sufficiently charged
before connecting.
Make sure that you
insert the cable
connector into the USB/
AV port until you feel it
click securely into place.
Failure to insert the
connector fully can result
in poor communication
or malfunction.
Note that even while the connector is fully inserted,
you still will be able to see the metal part of the
connector as shown in the illustration.
When connecting the USB cable to a USB port, make
sure you align the connector correctly with the port.
Your computer may not be able to recognize the camera if you connect via a
USB hub. Always connect directly to the computer’s USB port.
5. Turn on the camera.
USB port USB cable
Making sure that the 6 mark on the camera is
aligned with the 4 mark of the USB cable connector,
connect the cable to the camera.
USB/AV
port
Large connector
Small connector
91 Using the Camera with a Computer
6. Windows Vista users: Click “Start” and then “Computer”.
Windows XP users: Click “Start” and then “My Computer”.
Windows 2000 users: Doubleclick “My Computer”.
7. Double-click “Removable Disk”.
Your computer recognizes the memory card loaded in the camera (or built-in
memory if there is no card) as a removable disk.
8. Right-click the “DCIM” folder.
9. On the shortcut menu that appears, click “Copy”.
10.
Windows Vista users: Click “Start” and then “Documents”.
Windows XP users: Click “Start” and then “My Documents”.
Windows 2000 users: Doubleclick “My Documents” to open it.
If you already have a “DCIM” folder in “My Documents”, the next step will
overwrite it. If you want to keep the existing “DCIM” folder, you need to change
its name or move it to a different location before performing the next step.
11.
On the “My Documents” “Edit” menu, select “Paste”.
This will paste the “DCIM” folder (and all the image files it contains) into your “My
Documents” folder. You now have a copy of the files that are in camera memory
on your computer.
12.
After you finish copying images, disconnect the camera from the
computer.
Windows Vista, Windows XP
On the camera, press [ON/OFF] to turn off the camera. After making sure that the
back lamp is unlit, disconnect the camera from the computer.
Windows 2000
Click card services in the task tray on your computer screen, and disable the
drive number assigned to the camera. Next, after making sure that the back lamp
is unlit, press the camera’s [ON/OFF] button to turn off the camera and
disconnect the camera from your computer.
92 Using the Camera with a Computer
.To view images you copied to your computer
1. Double-click the copied “DCIM” folder to open it.
2. Double-click the folder that contains the images you want to view.
3. Double-click the image file you want to view.
For information about file names, see “Memory Folder Structure” on page 105.
An image that was rotated on the camera will be displayed on your computer
screen in its original (unrotated) orientation.
IMPORTANT!
Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
93 Using the Camera with a Computer
Windows Media Player, which is already installed on most computers, can be used
for movie playback. To play back a movie, first copy the movie to your computer and
then double-click the movie file.
.Movie Playback Precautions
Be sure to move the movie data to the hard disk of your computer before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
Proper movie playback may not be possible on some computers. If you experience
problems, try the following.
Try recording movies with a quality setting of “LP”.
Try upgrading Windows Media Player to the latest version.
Quit any other applications you have running, and stop resident applications.
Even if proper playback is not possible on the computer, you can use the AV cable
that comes bundled with the camera to connect to the video input terminal a TV or
computer and play back movies that way.
Installing YouTube Uploader for CASIO from the CD-ROM that comes with your
camera simplifies uploading of movie files you recorded with the “For YouTube”
BEST SHOT scene to YouTube.
.What is YouTube?
YouTube is a movie sharing site managed by YouTube, LLC where you can upload
movies and view movies uploaded by others.
.To install YouTube Uploader for CASIO
1. On the CD-ROM menu screen, select “YouTube Uploader for CASIO”.
2. After reading the information about installation conditions and system
requirements for installation in the “Read me” file, install YouTube
Uploader for CASIO.
Playing Movies
Uploading Movie Files to YouTube
94 Using the Camera with a Computer
.To upload a movie file to YouTube
Before you can use YouTube Uploader for CASIO, you need to go to the YouTube
website (http://www.youtube.com/) and register as a user there.
Do not upload any video that is copyrighted (including neighboring copyrights)
unless you yourself own the copyright or you have obtained the permission of the
applicable copyright holder(s).
The maximum file size for each upload is 1024MB.
1. Record the movie you want to upload using the “For YouTube” BEST
SHOT movie scene.
2. If it isn’t already, connect your computer to the Internet.
3. Connect the camera to your computer (page 89).
4. Turn on the camera.
YouTube Uploader for CASIO will start up automatically.
If this is the first time you are using the application, configure the YouTube user
ID and network environment settings, and then click the [OK] button.
5. The left side of the display will have an area for inputting a title,
category, and other information required for uploading to YouTube.
Enter the required information.
6. The right side of the display shows a list of movie files in camera
memory. Select the check box next to the movie file you want to
upload.
7. When everything is ready, click the [Upload] button.
This will upload the movie file(s) to YouTube.
After uploading is complete, click the [Exit] button to exit the application.
95 Using the Camera with a Computer
If you want to transfer images from your computer to the camera, install Photo
Transport on your computer from the CD-ROM that comes with the camera.
.To install Photo Transport
1. On the CD-ROM menu screen, select “Photo Transport”.
2. After reading the information about installation conditions and system
requirements for installation in the “Read me” file, install Photo
Transport.
.To transfer images to the camera
1. Connect the camera to your computer (page 89).
2. On your computer, click the following: Start * All Programs *
CASIO * Photo Transport.
This starts up Photo Transport.
3. Drag the file(s) you want to transfer to the [Transfer] button.
4. Follow the instructions that appear on the display to complete the
transfer.
The details of the instructions that appear on the display and the transferred
images will depend on your Photo Transport setup. For details, click the
[Settings] button or [Help] button and check the setup.
Transfer Data
Only image files with the following extensions can be transferred to the camera:
jpg, jpeg, jpe, bmp (bmp images are converted to jpeg image automatically when
transferred.)
Certain types of images may not be able to be transferred.
You cannot transfer movies to the camera.
Transferring Images from Your Computer to Camera Memory
96 Using the Camera with a Computer
.To transfer computer screen captures to the camera
1. Connect the camera to your computer (page 89).
2. On your computer, click the following: Start * All Programs *
CASIO * Photo Transport.
This starts up Photo Transport.
3. Display the screen whose screen capture you want to transfer.
4. Click the [Capture] button.
5. Draw a boundary around the area you want to capture.
Move your mouse pointer to the upper left corner of the area you want to capture
and then hold down the mouse button. Keeping the mouse button depressed,
drag the pointer down to the lower right corner of the area and then release the
mouse button.
6. Follow the instructions that appear on the display.
This will send an image of the area you selected to the camera.
The transfer operation converts screen captures to JPEG format.
The instructions that appear on the display and details about the transferred
images will depend on your Photo Transport setup. For details, click the
[Settings] button or [Help] button and check the setup.
.About settings and help
Click the [Settings] button when you want to change the Photo Transport setup. For
help about operation procedures and troubleshooting, click the Photo Transport
[Help] button.
97 Using the Camera with a Computer
1. Start up your computer, and place the bundled CD-ROM into its CD-
ROM drive.
Normally, this should cause the menu screen to appear automatically. If your
computer does not display the menu screen automatically, navigate to the CD-
ROM on your computer and then double-click the “AutoMenu.exe” file.
2. On the menu screen, click the “Language” down arrow button and then
select the language you want.
3. Click “Manual” to select it and then click “Digital Camera”.
IMPORTANT!
You must have Adobe Reader or Adobe Acrobat Reader installed on your
computer in order to view the contents of a PDF file. If you do not already have
Adobe Reader or Adobe Acrobat Reader installed, install Adobe Reader from the
bundled CD-ROM.
You can perform user registration over the Internet. To do so, of course, you need to
be able to connect to the Internet with your computer.
1. On the CD-ROM menu screen, click the “Register” button.
This starts up your Web browser and accesses the user registration website.
Follow the instructions that appear on your computer screen to register.
Viewing User Documentation (PDF Files)
User Registration
98 Using the Camera with a Computer
Install the required software in accordance with what version of the Macintosh OS
you are running and what you want to do.
IMPORTANT!
The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X
10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4, 10.5) only.
Use the standard USB driver that comes with your supported operating system.
.To connect the camera to your computer and save files
1. Turn on the camera and press [MENU].
2. On the “Set Up” tab, select “USB” and then press [6].
3. Use [8] and [2] to select “Mass Storage”, and then press [SET].
Using the Camera with a Macintosh
When you want to do
this:
Operating
System
Version
Install this software: See
page:
Save images to your
Macintosh and view
them there manually
OS 9
Installation not required. 98
OS X
Save images to your
Macintosh automatically/
Manage images
OS 9 Use commercially available
software. 101
OS X Use iPhoto, which comes bundled
with your operating system.
Play movies OS 9 / OS X
You can playback with QuickTime,
which comes bundled with your
operating system.
101
Connecting the Camera to Your Computer and Saving Files
99 Using the Camera with a Computer
4. Turn off the camera and
then use the USB cable
that comes with the
camera to connect it to
your Macintosh.
The camera does not
draw power over the
USB cable. Make sure
the camera’s battery is
sufficiently charged
before connecting.
Make sure that you
insert the cable
connector into the USB/
AV port until you feel it
click securely into place.
Failure to insert the
connector fully can result
in poor communication
or malfunction.
Note that even while the connector is fully inserted,
you still will be able to see the metal part of the
connector as shown in the illustration.
When connecting the USB cable to a USB port, make
sure you align the connector correctly with the port.
Your computer may not be able to recognize the camera if you connect via a
USB hub. Always connect directly to the computer’s USB port.
5. Turn on the camera.
The camera’s back lamp will light green at this time. In this mode, your Macintosh
recognizes the memory card loaded in the camera (or the camera’s built-in
memory if it does not have a memory card loaded) as a drive. The appearance of
the drive icon depends on the Mac OS version you are using.
USB port USB cable
Making sure that the 6 mark on the camera is
aligned with the 4 mark of the USB cable connector,
connect the cable to the camera.
USB/AV
port
Large connector
Small connector
100 Using the Camera with a Computer
6. Double-click the camera’s drive icon.
7. Drag the “DCIM” folder to the folder to which you want to copy it.
8. After the copy operation is complete, drag the drive icon to Trash.
9. On the camera, press [ON/OFF] to turn off the camera. After making
sure that the green back lamp is unlit, disconnect the camera from the
computer.
.To view copied images
1. Double-click the camera’s drive icon.
2. Double-click the “DCIM” folder to open it.
3. Double-click the folder that contains the images you want to view.
4. Double-click the image file you want to view.
For information about file names, see “Memory Folder Structure” on page 105.
An image that was rotated on the camera will be displayed on your Macintosh
screen in its original (unrotated) orientation.
IMPORTANT!
Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
101 Using the Camera with a Computer
If you are running Mac OS X, you can use the iPhoto application that comes bundled
with the operating system to manage your images. If you are running Mac OS 9, you
will need to use commercially available software.
You can use QuickTime, which comes bundled with your operating system, to play
back movies on a Macintosh. To play back a movie, first copy it to your Macintosh
and then double-click the movie file.
.Movie Playback Precautions
Proper movie playback may not be possible on some Macintosh models. If you
experience problems, try the following.
Change the movie image quality setting to “LP”.
Upgrade to the latest version of QuickTime.
Shut down other applications that are running.
Even if proper playback is not possible on your Macintosh, you can use the AV cable
that comes bundled with the camera to connect to the video input terminal a TV or
Macintosh and play back movies that way.
IMPORTANT!
Be sure to move the movie data to the hard disk of your Macintosh before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
Transferring Images Automatically and Managing Them on
Your Macintosh
Playing a Movie
102 Using the Camera with a Computer
You must have Adobe Reader or Adobe Acrobat Reader installed on your computer
in order to view the contents of a PDF file. If you don’t, go to the Adobe Systems
Incorporated website and install Acrobat Reader.
1. On the CD-ROM, open the “Manual” folder.
2. Open the “Digital Camera” folder and then open the folder for the
language whose user’s guide you want to view.
3. Open the file named “camera_xx.pdf”.
“xx” is the language code (Example: camera_e.pdf is for English.)
Internet registration only is supported. Visit the following CASIO website to register:
http://world.casio.com/qv/register/
Viewing User Documentation (PDF Files)
User Registration
103 Using the Camera with a Computer
Shooting with an Eye-Fi wireless SD memory card loaded in the camera makes it
possible to transfer image data automatically to a computer via wireless LAN.
1. Configure LAN access point, transfer destination and other settings for
the Eye-Fi card in accordance with the instructions that come with the
Eye-Fi card.
2. After configuring settings, load the Eye-Fi card into the camera and
record.
Images you record are sent by wireless LAN to your computer, etc.
For full details, see the user documentation that comes with the Eye-Fi card.
Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi
Manager install files to your computer. Do this before formatting the card.
IMPORTANT!
Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or
turn off Eye-Fi card communication (page 108) when on an aircraft or in any other
location where use of wireless communication is limited or prohibited.
Loading an Eye-Fi card will cause the Eye-Fi indicator to
appear on the monitor screen. Its transparent or not transparent
appearance indicates the communication status as shown below.
A communication icon will appear on the monitor screen while image data
transfer is in progress.
The camera’s Auto Power Off (page 114) function is disabled while image data
transfer is in progress.
A confirmation message will appear on the monitor screen if you try to turn off the
camera while image data transfer is in progress. Follow the instructions in the
messages (page 140).
Transfer of a large number of images can take some time to complete.
The original images remain on the Eye-Fi card after the image data transfer.
Recording a movie to an Eye-Fi card may result in movie frames being dropped.
Proper Eye-Fi card data communication may not be possible due to camera
settings, battery level, or operating conditions.
Using an Eye-Fi Wireless SD Memory Card to Transfer Images
(Eye-Fi)
Transparent Access point cannot be found or no transferable
image data exists.
Not transparent Image transfer in progress
B
104 Using the Camera with a Computer
The camera creates a file and saves it each time you shoot a snapshot, record a
movie, or perform any other operation that stores data. Files are grouped by storing
them in folders. Each file and folder has its own unique name.
For details about how folders are organized in memory, see “Memory Folder
Structure” (page 105).
You can view folder and file names on your computer. For details about how file
names are displayed on the camera’s monitor screen, see page 12.
The total number of folders and files allowed depends on the image size and
quality, and capacity of the memory card being used for storage.
Files and Folders
Name and Maximum Number Allowed Example
File
Each folder can contain up to 9999 files named
CIMG0001 through CIMG9999. The extension
on the file name depends on the file type.
26th file name:
Folders
Folders are named from 100CASIO to
999CASIO
There can be up to 900 folders in memory.
The BEST SHOT (page 52) includes a
sample scene that optimizes settings for
auction site images. Depending on your
camera model, the sample scene is named
either “For eBay” or “Auction”.
Images recorded with the eBay scene are
stored in a folder named “100_EBAY”.
Images recorded with the Auction scene
are stored in a folder named “100_AUCT”.
BEST SHOT also has a scene named “For
YouTube” that optimizes movie settings for
recording movies for upload to YouTube.
Images recorded with the YouTube scene
are stored in a folder named “100YOUTB”.
100th folder name:
CIMG0026.JPG
Extension
Serial number (4 digits)
100CASIO
Serial number (3 digits)
105 Using the Camera with a Computer
The camera stores images you shoot in accordance with the Design Rule for Camera
File System (DCF).
.About DCF
DCF is a standard that makes it possible to view and print images recorded on one
manufacturer’s camera on DCF-compliant devices produced by other manufacturers.
You can transfer DCF-compliant images recorded with another camera to this
camera and view them on this camera’s monitor screen.
.Memory Folder Structure
DCIM Folder
Recording Folder
Image File
Movie File
Audio File
Audio Snapshot Image File
Audio Snapshot Audio File
Recording Folder
Recording Folder
DPOF File Folder
DPOF File
*Other folders are created when the following BEST SHOT scenes are used for
recording: “For eBay” or “Auction” (scene name depends on camera model), or “For
YouTube”. The following shows the name of the folder created for each scene.
eBay scene: 100_EBAY
Auction scene: 100_AUCT
YouTube scene: 100YOUTB
Memory Card Data
DCIM
100CASIO *
CIMG0001.JPG
CIMG0002.AVI
CIMG0003.WAV
CIMG0004.JPG
CIMG0004.WAV
101CASIO *
102CASIO *
MISC
AUTPRINT.MRK
106 Using the Camera with a Computer
.Supported Image Files
Image files shot with this camera
DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When
displaying an image recorded on another camera, it may take a long time for the
image to appear on this camera’s monitor screen.
.Built-in Memory and Memory Card Data Handling Precautions
Whenever copying memory contents to your computer, you should copy the DCIM
folder and all of its contents. A good way to keep track of multiple DCIM copies of
the DCIM folders it to change its name to a date or something similar after you copy
it to your computer. If you later decided to return the folder to the camera, however,
be sure to change its name back to DCIM. The camera is designed to recognize
only a root file with the name DCIM. Note the camera also will not be able to
recognize the folders inside the DCIM folder unless they have the names they
originally had when you copied them from the camera to your computer.
Folders and files must be stored in accordance with the “Memory Folder Structure”
shown on page 105 in order for the camera to be able to recognize them correctly.
You also can use a PC card adapter or a memory card reader/writer to access
camera files directly from the camera’s memory card.
107 Other Settings (Set Up)
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
Procedure
[MENU] * Set Up Tab * R Panel
The REC mode screen layout settings let you select the layout of icons.
All screen shots in this manual show what appears when the Control Panel is
turned on.
For information about menu operations, see page 55.
Selecting a REC Mode Screen Layout (R Panel)
On
Displays the Control Panel. The Control Panel
makes it quick and easy to change certain
camera settings.
Off
Turns off Control Panel display. This setting
helps to view more of the image when the 16:9
aspect ratio is selected. Certain camera settings
are indicated by icons on the image.
108 Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * P Display
The PLAY mode screen layout settings let you select how display images are shown
on the monitor screen.
Procedure
[MENU] * Set Up Tab * Eye-Fi
Select “Off” to disable Eye-Fi card communication (page 103).
Selecting a PLAY Mode Screen Layout (P Display)
Wide
With this setting, the display image is the
maximum possible size that allows the entire
image to be displayed horizontally. With some
aspect ratios, the top and bottom of the image
will be cut off.
4:3
100% of the display image is always visible.
With some aspect ratios, black bands may
appear above and below, or to the left and right
of the image.
Turning off Eye-Fi Card Communication (Eye-Fi)
109 Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Sounds
Setting a volume level of 0 mutes output.
Procedure
[MENU] * Set Up Tab * Startup
Display the image you want to use as your startup image and then select “On”.
The startup image does not appear when you turn on the camera by pressing [p]
(PLAY).
You can specify a snapshot you recorded as the startup image, or you can use the
special startup image provided in the camera’s built-in memory.
If you select an audio snapshot as the startup image, the audio will not play at
startup.
Formatting built-in memory (page 117) will delete the current startup image setting.
Configuring Camera Sound Settings (Sounds)
Startup
Specifies the startup sound
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Half Shutter
Shutter
Operation
Operation Specifies the sound volume. This setting is also used as the
audio level during video output (page 73).
Play
Specifies the volume of movie and Audio Snapshot audio
output. This volume setting is not used during video output
(from the USB/AV port).
Configuring a Startup Image (Startup)
=
=
110 Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial
number used in file names (page 104).
Specifying the File Name Serial Number Generation Rule
(File No.)
Continue
Tells the camera to remember the last used file number. A new file will
be named using the next sequential number, even if files are deleted or
if a blank memory card is loaded. If a memory card is loaded and that
card already has files stored on it and the largest sequential number in
the existing file names is greater than the largest sequential number
remembered by the camera, numbering of new files will start from the
largest sequential number in the existing file names plus 1.
Reset
Restarts the serial number from 0001 whenever all files are deleted or
when the memory card is replaced with a blank one. If a memory card
is loaded and that card already has files stored on it, numbering of new
files will start from the largest sequential number in the existing file
names number plus 1.
111 Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * World Time
You can use the World Time screen to view the current time in a zone that is different
from your Home City when you go on a trip, etc. World Time displays the current time
in 162 cities in 32 time zones around the globe.
1. Use [8] and [2] to select “World” and then press [6].
To change the geographic area and city for the time where you normally use
the camera, select “Home”.
2. Use [8] and [2] to select “City” and then press [6].
To change the “World” setting to summer time, use [8] and [2] to select
“DST” and then select “On”. Summer time is used in some geographical areas
to advance the current time setting by one hour during the summer months.
3. Use [8], [2], [4], and [6] to select the geographic area you want and
then press [SET].
4. Use [8] and [2] to select the city you want and then press [SET].
5. Press [SET].
IMPORTANT!
Before configuring World Time settings, make sure that the Home City setting is
the place where you live or normally use the camera. If it isn’t, select “Home” on the
screen in step 1 and configure the Home City, date, and time settings as required
(page 112).
Configuring World Time Settings (World Time)
112 Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: December 19, 2010, 1:25 p.m.
Even if you do not stamp the date and/or time with Timestamp, you can do so later
using the DPOF function or some printing application (page 86).
Digital zoom is disabled while date stamping is turned on.
Procedure
[MENU] * Set Up Tab * Adjust
When the date and time settings are what you want, select “Apply” and then press
[SET] to apply them.
You can specify a date from 2001 to 2049.
Be sure to select your Home City (page 111) before setting the time and date. If
you set the time and date while the wrong city is selected for your Home City, the
times and dates of all of the World Time cities (page 111) will be wrong.
Time Stamping Snapshots (Timestamp)
Date 2010/12/19
Date&Time 2010/12/19 1:25pm
Off No stamping of date and/or time
Setting the Camera’s Clock (Adjust)
[8] [2]Change the setting at the cursor location
[4] [6]Move the cursor between settings
[BS] Toggles between 12-hour and 24-hour format
113 Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Date Style
You can select from among three different styles for the date.
Example: December 19, 2010
This setting also affects the Control Panel date format as shown below (page 31).
YY/MM/DD or MM/DD/YY: MM/DD
DD/MM/YY: DD/MM
Procedure
[MENU] * Set Up Tab * Language
.Specify the display language you want.
1Select the tab on the right.
2Select “Language”.
3Select the language you want.
Specifying the Date Style (Date Style)
YY/MM/DD 10/12/19
DD/MM/YY 19/12/10
MM/DD/YY 12/19/10
Specifying the Display Language (Language)
1
23
114 Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Sleep
This feature turns off the monitor screen whenever no camera operation is performed
for a preset amount of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is
selected.)
Sleep is disabled under any of the following conditions.
In the PLAY mode
While the camera is connected to a computer or other device
During a slideshow
During Voice Recording playback or recording
During movie recording and playback
When both sleep and Auto Power Off are turned on, Auto Power Off takes priority.
Procedure
[MENU] * Set Up Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for
a preset amount of time.
Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the
PLAY mode.)
Auto Power Off is disabled under any of the following conditions.
While the camera is connected to a computer or other device
During a slideshow
During Voice Recording playback or recording
During movie recording and playback
Configuring Sleep State Settings (Sleep)
Configuring Auto Power Settings (Auto Power Off)
115 Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * REC/PLAY
With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC
mode or [p] (PLAY) in the PLAY mode.
Change this setting to anything besides “Disable” before connecting to a TV for
image viewing.
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
Configuring [r] and [p] Settings (REC/PLAY)
Power On Camera turns on whenever [r] (REC) or [p] (PLAY) is
pressed.
Power On/Off Camera turns on or off whenever [r] (REC) or [p] (PLAY)
is pressed.
Disable Camera does not turn on or off whenever [r] (REC) or [p]
(PLAY) is pressed.
Configuring USB Protocol Settings (USB)
Mass
Storage
Select this setting when connecting to a computer (pages 89, 98).
With this setting, the computer sees the camera as an external
storage device. Use this setting for normal transfer of images from
the camera to a computer.
PTP
(PictBridge)
Select this setting when connecting to a printer that supports
PictBridge (page 82). This setting simplifies the transfer of image
data to the connected device.
116 Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Images will not display correctly if you select the wrong aspect ratio.
Images will not display correctly unless the camera’s video signal output setting
matches the video signal system of the TV or other video equipment.
Images cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
Selecting the Screen Aspect Ratio and Video Output System
(Video Out)
NTSC Video system used in Japan, the U.S., and other countries
PAL Video system used in Europe and other areas
4:3 Normal TV screen aspect ratio
16:9 Wide screen aspect ratio
117 Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * Format
If a memory card is loaded in the camera, this operation will format the memory card.
It will format built-in memory if no memory card is loaded.
The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
Formatting built-in memory will delete the following data.
Protected images
Startup screen
Formatting a memory card will delete the following data.
Protected images
Make sure the camera’s battery is sufficiently charged before starting a formatting
operation. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
Never open the battery cover while formatting is in progress. Doing so can cause
the camera to stop operating normally.
Procedure
[MENU] * Set Up Tab * Reset
See page 133 for details about the camera’s factory default settings.
The settings below are not reset.
World Time settings, clock settings, date style, screen language, video output
Formatting Built-in Memory or a Memory Card (Format)
Resetting the Camera to Factory Defaults (Reset)
118 Configuring Monitor Screen Settings
Configuring Monitor Screen Settings
You can turn display information on and off by pressing [8] (DISP). You can
configure separate settings for the REC mode and PLAY mode.
Displays a histogram on the monitor screen which you can use to
check the exposure of an image before you shoot it. You also can
display the histogram in the PLAY mode for information about the
exposure levels of images.
You can use key customization (page 64) to configure the [4]
and [6] buttons so they control the EV shift setting (page 42),
and perform EV shift while viewing the results on the on-screen
histogram.
NOTE
A centered histogram does not necessarily guarantee optimum exposure. The
recorded image may be over-exposed or under-exposed, even though its
histogram is centered.
Due to the limitations of exposure compensation, you may not be able to achieve
an optimum histogram configuration.
Use of the flash and certain shooting conditions can cause the histogram to
indicate exposure that is different from the actual exposure of the image when it is
shot.
Information display
on
Displays information about image settings, etc.
Information display
+ Histogram on
Turns on display of camera setting and
other indicators, along with a histogram
(page 119)
Information display
off
No information displayed
Using the On-screen Histogram to Check Exposure
(+Histogram)
Histogram
Histogram
119 Configuring Monitor Screen Settings
A histogram is a graph that represents the lightness of an image in terms of the
number of pixels. The vertical axis indicates the number of pixels, while the horizontal
axis indicates lightness. If the histogram appears too lopsided for some reason, you
can use EV shift to move it left or right in order to achieve better balance. Optimum
exposure can be achieved by EV shifting so the graph is as close to the center as
possible. For snapshots, you can even display individual histograms for R (red), G
(green), and B (blue).
Example Histograms
How to Use the Histogram
A histogram towards the left side results when the
overall image is dark. A histogram that is too far to
the left may result in “black out” of the dark areas
of an image.
A histogram towards the right side results when
the overall image is light. A histogram that is too
far to the right may result in “white out” of the light
areas of an image.
An overall well-balanced histogram results when
the overall image is at optimal lightness.
120 Appendix
Appendix
.Avoid Use While In Motion
Never use the camera to record or play back images while operating an automobile
or other vehicle, or while walking. Looking at the monitor while in motion creates
the risk of serious accident.
.Directly Viewing the Sun or Bright Light
Never look at the sun or any other bright light through the cameras viewfinder.
Doing so can damage your eyesight.
.Flash
Never use the flash unit in areas where flammable or explosive gas may be
present. Such conditions create the risk of fire and explosion.
Never fire the flash in the direction of a person operating a motor vehicle. Doing so
can interfere with the driver’s vision and creates the risk of accident.
Never fire the flash too close to the eyes of the subject. Doing so creates the risk of
loss of eyesight.
.Monitor Screen
Do not apply strong pressure to the monitor screen surface or subject it to strong
impact. Doing so can cause the monitor screen glass to crack.
Should the monitor screen ever become cracked, never touch any of the liquid
inside the monitor screen. Doing so creates the risk of skin inflammation.
Should monitor screen liquid ever get into your mouth, immediately rinse your
mouth out and contact your physician.
Should monitor screen liquid ever get into your eyes or onto your skin, immediately
rinse with clean water for at least 15 minutes and contact your physician.
.Connections
Never plug any devices that are not specified for use with this camera into
connectors. Connecting a non-specified device creates the risk of fire and electric
shock.
.Transport
Never operate the camera inside of an aircraft or anywhere else where operation of
such devices is restricted. Improper use creates the risk of serious accident.
Precautions during Use
121 Appendix
.Smoke, abnormal odor, overheating, and other abnormalities
Continued use of the camera while it is emitting smoke or strange odor, or while it
is overheating creates the risk of fire and electric shock. Immediately perform the
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera, taking care to protect yourself against burn
injury.
3. Contact your dealer or nearest CASIO authorized service center.
.Water and Foreign Matter
Water, other liquids, or foreign matter (especially metal) getting inside the camera
creates the risk of fire and electric shock. Immediately perform the following steps
whenever any of the above symptoms are present. Particular care is required when
using the camera where it is raining or snowing, near the ocean or other body of
water, or in a bathroom.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
.Dropping and Rough Treatment
Continued use of the camera after it is damaged by dropping or other rough
treatment creates the risk of fire and electric shock. Immediately perform the
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
.Keep Away From Fire
Never expose the camera to fire, which can cause it to explode and creates the risk
of fire and electric shock.
.Disassembly and Modification
Never try to take the camera apart or modify it in any way. Doing so creates the risk
of electric shock, burn injury, and other personal injury. Be sure to leave all internal
inspection, maintenance, and repair up to your dealer or nearest CASIO authorized
service center.
122 Appendix
.Locations To Be Avoided
Never leave the camera in any of the following types of locations. Doing so creates
the risk of fire and electric shock.
Areas subject to large amounts of humidity or dust
Food preparation areas or other locations where oil smoke is present
Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed
vehicle parked in the sun, or other areas subject to very high temperatures
Never place the camera on an unstable surface, on a high shelf, etc. Doing so can
cause the camera to fall, creating the risk of personal injury.
.Backing Up Important Data
Always keep backup copies of important data in camera memory by transferring it
to a computer or other storage device. Note that data can be deleted in the case of
camera malfunction, repair, etc.
.Memory Protection
Whenever replacing the battery, be sure to follow the correct procedure as
described in the documentation that comes with the camera. Incorrectly replacing
the battery can result in corruption or loss of data in camera memory.
.Rechargeable Battery
Use only the specified charger unit or the specified device to charge the battery.
Attempting to charge the battery by an unauthorized means creates the risk of
battery overheating, fire, and explosion.
Do not expose or immerse the battery in fresh water or salt water. Doing so can
damage the battery, and cause deterioration of its performance and loss of service
life.
The battery is intended for use with a CASIO Digital Camera only. Use with any
other device creates the risk of the battery damage, or deterioration of battery
performance and service life.
Failure to observe any of the following precautions creates the risk of battery
overheating, fire, and explosion.
Never use or leave the battery near open flame.
Do not expose the battery to heat or fire.
Make sure the battery is oriented correctly when it is connected to the charger
unit.
Never carry or store the battery together with items that can conduct electricity
(necklaces, pencil lead, etc.)
Never disassemble the battery, pierce it with a needle, or expose it to strong
impact (hit it with a hammer, step on it, etc.), and never apply solder to it. Never
place the battery into a microwave oven, heater, high-pressure generating
device, etc.
123 Appendix
Should you ever notice leakage, strange odor, heat generation, discoloration,
deformation, or any other abnormal condition while using, charging, or storing a
battery, immediately remove it from the camera or charger unit and keep it away
from open flame.
Do not use or leave the battery under direct sunlight, in an automobile parked in the
sun, or in any other area subject to high temperatures. Doing so can damage the
battery, and cause deterioration of its performance and loss of service life.
If battery charging does not end normally within the specified charging time, stop
charging anyway and contact your local CASIO authorized service center.
Continued charging creates the risk of battery overheating, fire, and explosion.
Battery fluid can damage your eyes. Should battery fluid get into your eyes
accidentally, immediately rinse them with clean tap water and then consult a
physician.
Be sure to read the user documentation that comes with the camera and special
charger unit before using or charging the battery.
If a battery is to be used by young children, make sure that a responsible adult
makes them aware of the precautions and proper handling instructions, and make
sure that they handle the battery correctly.
Should fluid from a battery accidentally get onto clothing or your skin, immediately
rinse it off with clean tap water. Prolonged contact with battery fluid can cause skin
irritation.
.Battery Life
Battery continuous operation times provided in this manual represent the
approximate amount of time before the camera turns off due to low battery power
when being powered by the special battery under normal temperature (23°C
(73°F)). They do not guarantee that you will be able to achieve the indicated level
of operation. Actual battery life is greatly affected by ambient temperature, battery
storage conditions, the amount of time spent in storage, etc.
Leaving the camera on can run down the battery and cause the low battery
warning to appear. Turn off the camera whenever you are not using it.
The low battery warning indicates that the camera is about to turn off due to low
battery power. Charge the battery as soon as possible. Leaving a low or dead
battery in the camera can lead to battery leakage and data corruption.
124 Appendix
.Data Error Precautions
Your digital camera is manufactured using precision digital components. Any of the
following creates the risk of corruption of data in camera memory.
Removing the battery or memory card while the camera is performing some
operation
Removing the battery or memory card while the back lamp is flashing green after
turning off the camera
Disconnecting the USB cable while communication is in progress
Using a battery that is low
Other abnormal operations
Any of the above conditions can cause an error message to appear on the monitor
screen (page 140). Perform the action indicated by the message that appears.
.Operating Environment
Operating Temperature: 0 to 40°C (32 to 104°F)
Operating Humidity: 10 to 85% (non condensation)
Do not place the camera in any of the following locations.
In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand
Near an air conditioner or in other areas subjected to extreme temperature or
humidity
Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration
.Condensation
Sudden and extreme temperature changes, such as when the camera is moved from
the outdoors on a cold winter day into a warm room, can cause water droplets called
“condensation” to form on the interior and the exterior of the camera, which creates
the risk of malfunction. To prevent condensation from forming seal the camera in a
plastic bag before changing locations. Then leave the bag sealed to allow the air
inside to naturally change to the same temperature as the air in the new location.
After that, remove the camera from the bag and open the battery cover for a few
hours.
.Lens
Never apply too much force when cleaning the surface of the lens. Doing so can
scratch the lens surface and cause malfunction.
You may sometimes notice some distortion in certain types of images, such as a
slight bend in lines that should be straight. This is due to the characteristics of
lenses, and does not indicate malfunction of the camera.
125 Appendix
.Caring for your camera
Never touch the lens or flash window with your fingers. Finger smudges, dirt, and
other foreign matter on the lens or flash window can interfere with proper operation
of the camera. Use a blower or other means to keep the lens and flash window free
of dirt and dust, and wipe gently with a soft, dry cloth.
To clean the camera, wipe it with a soft, dry cloth.
.Old Rechargeable Battery Handling Precautions
Insulate the positive and negative terminals with tape, etc.
Do not peel the covering off of the battery.
Do not try to take the battery apart.
.Charger Unit Handling Precautions
The charger unit becomes slightly warm during charging. This is normal and does
not indicate malfunction.
Unplug the power cord from the power outlet when you are not using the charger
unit.
Never use detergent to clean the power cord (especially the plug).
Never cover the charger unit with a blanket, etc. Doing so creates the risk of fire.
-
0Never plug the power cord into an outlet whose voltage rating is different from
that marked on the power cord. Doing so creates the risk of fire, malfunction,
and electric shock.
0Take care to protect the power cord against damage and breaking. Never place
heavy objects onto the power cord, or expose it to intense heat. Doing so can
damage the power cord, creating the risk of fire and electric shock.
0Never try to modify the power cord, or subject it to severe bending, twisting, or
pulling. Doing so creates the risk of fire, malfunction, and electric shock.
0Never plug in or unplug the power cord while your hands are wet. Doing so
creates the risk of electric shock.
0Do not plug the power cord into an outlet or extension cord that is shared by
other devices. Doing so creates the risk of fire, malfunction, and electric shock.
0Should the power cord ever become damaged (to the point that internal wires
are exposed or cut), immediately contact your original retailer or authorized
CASIO authorized service center to request repair. Continued use of a damaged
power cord creates the risk of fire, malfunction, and electric shock.
126 Appendix
.Other Precautions
The camera becomes slightly warm during use. This is normal and does not indicate
malfunction.
.Copyrights
Except for your own personal enjoyment, unauthorized use of use of snapshots or
movies of images whose rights belong to others, without the permission of the right
holder, is forbidden by copyright laws. In some cases, shooting of public
performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your
own personal enjoyment. Regardless of whether such files are purchased by you or
obtained for free, posting them on a website, a file sharing site, or any other Internet
site, or otherwise distributing them to third parties without the permission of the
copyright holder is strictly prohibited by copyright laws and international treaties. For
example, uploading or distributing on the Internet images of TV programs, live
concerts, music videos, etc. that were photographed or recorded by you may infringe
upon the rights of others. Note that CASIO COMPUTER CO., LTD. shall not be held
liable for use of this product in any way that infringes on the copyrights of others or
that violates copyright laws.
Note that trademark and registered trademark ® are not use within the text of this
manual.
The SDHC logo is a trademark.
Microsoft, Windows, Internet Explorer, Windows Media, Windows Vista, and
DirectX are registered trademarks or trademarks of Microsoft Corporation in the
United States and other countries.
Macintosh, Mac OS, QuickTime, and iPhoto are trademarks of Apple Inc.
Adobe and Reader are trademarks or registered trademarks in the United States
and other countries of Adobe Systems Incorporated.
YouTube, the YouTube logo, and “Broadcast Yourself” are trademarks or
registered trademarks of YouTube, LLC.
EXILIM, Photo Transport, and YouTube Uploader for CASIO are registered
trademarks or trademarks of CASIO COMPUTER CO., LTD.
All other company or product names mentioned herein are registered trademarks
or trademarks of their respective companies.
The following terms, which are used in this manual, are registered trademarks or
trademarks of their respective owners.
127 Appendix
Any and all unauthorized commercial copying, distribution, and copying of the
bundled software over a network are prohibited.
This product’s YouTube upload functionality is included under license from YouTube,
LLC. The presence of YouTube upload functionality in this product is not an
endorsement or recommendation of the product by YouTube, LLC.
128 Appendix
If the [CHARGE] lamp does not light red...
Charging cannot be performed because ambient temperature or the temperature of
the charger is too hot or too cold. Leave the camera in a location whose temperature
is within the range where charging can be performed. When the camera returns to a
temperature where charging can be performed, the [CHARGE] lamp will light red.
If the [CHARGE] lamp flashes red...
The battery is faulty or the battery is loaded in the charger incorrectly. Remove the
battery from the charger and check if its contacts are dirty. If contacts become dirty,
wipe them clean with a dry cloth. When experiencing charging problems, also check
to make sure that the power cord is not disconnected from the power outlet or
charger.
1. Open the battery cover and remove
the current battery.
With the monitor screen side of the
camera facing upwards, slide the stopper
in the direction indicated by the arrow in
the illustration. After the battery pops out,
pull it the rest of the way out of the
camera.
2. Load a new battery.
Power Supply
Charging
If problems continue to occur after you perform the above steps, it could mean that
the battery is faulty. Contact your nearest CASIO authorized service center.
To replace the battery
Stopper
129 Appendix
.Precautions during Use
Operation provided by a battery under cold conditions is always less than operation
under normal temperatures. This is due to the characteristics of the battery, not the
camera.
Charge the battery in an area where the temperature is within the range of 5°C to
35°C (41°F to 95°F). Outside this temperature range charging can take longer than
normal or even fail.
Do not tear or remove the battery outer label.
If a battery provides only very limited operation following a full charge, it probably
means the battery has reached the end of its service life. Replace the battery with a
new one.
.Storage Precautions
Storing the battery for a long time while it is charged can cause deterioration of
battery characteristics. If you do not plan to use a battery for some time, fully use
up its charge before storing it.
Always remove the battery from the camera when you are not using it. A battery left
in the camera can discharge and go dead, which will require some time to charge
when you need to use the camera.
Store batteries in a cool, dry place (20°C (68°F) or lower).
To prevent over discharging of an unused battery, fully charge it, and then load it in
the camera and fully use up the charge about once every six months.
.Precautions during Use
The bundled charger is designed for operation with any power supply in the range
of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the power cord
plug depends on each country or geographic area. Before taking the camera and
charger along on a trip, check with travel agent about the power supply
requirements in your destination(s).
Do not connect the charger to a power supply through a voltage converter or
similar device. Doing so can lead to malfunction.
.Extra Batteries
Taking along extra fully charged batteries (NP-60) is recommended while on a trip
in order to avoid not being able to shoot images due to the battery going dead.
Battery Precautions
Using the Camera in another Country
130 Appendix
See page 21 for information about supported memory cards and how to load a
memory card.
Press the memory card and then release it. This will
cause it to pop out of the memory card slot slightly. Pull
the card out the rest of the way and then insert another
one.
Never remove a card from the camera while the back
lamp is flashing green. Doing so can cause the image
save operation to fail and even damage the memory
card.
.Using a Memory Card
SD memory cards and SDHC memory cards have a
write protect switch. Use the switch when you need to
guard against accidentally deleting data. Note,
however, if you write protect an SD memory card you
must then turn write protection off whenever you want
to record to it, format it, or delete any of its images.
If a memory card starts to behave abnormally during
image playback, you can restore normal operation by reformatting it (page 117).
However, it is recommended that you always take along multiple memory cards
whenever using the camera far away from the home or office.
As you record data to and delete data from a memory card a number of times, it
loses its ability to retain data. Because of this, periodic re-formatting of a memory
card is recommended.
Electrostatic charge, electrical noise, and other phenomena can cause data to
become corrupted or even lost. Make sure that you always back up important data
on other media (CD-R, CD-RW, hard disk, etc.)
Using a Memory Card
To replace the memory card
Write enabled
Write disabled
131 Appendix
.Memory Card Handling Precautions
Certain types of cards can slow down processing speeds. In particular, you may
experience problems saving high-quality (WIDE) movies. Use of certain types of
memory cards increase the time it takes to record movies, which can cause movie
frames to be lost. This condition is indicated by » and Y flashing on the monitor
screen. Use of a memory card with a maximum transfer speed of at least 10MB per
second is recommended.
.Discarding or Transferring Ownership of a Memory Card or the
Camera
The format and delete functions of this camera just modify file management
information of memory card and/or camera main memory. They do not actually
modify the data itself. Note that management of your data is entirely your
responsibility. To ensure data security, the following actions are recommended
whenever you discard or transfer ownership of a memory card or the camera.
When discarding a memory card and/or the camera, either physically destroy them
or completely wipe out all of their data using commercially available software, etc.
When transferring ownership of a memory card and/or the camera, completely
wipe out all of their data using commercially available software, etc., and then use
the camera’s format function to format the memory card and/or camera main
memory.
132 Appendix
Computer system requirements are different for each of the applications. Be sure to
check the requirements for the particular application you are trying to use. Note that
the values provided here are minimum requirements for running each application.
Actual requirements are greater, depending on the number of images and the sizes of
the images being handled.
0Windows
YouTube Uploader for CASIO
Photo Transport 1.0
Adobe Reader 8
For details about the minimum system requirements for each software application,
see the “Read me” files on the CASIO Digital Camera Software CD-ROM that comes
bundled with the camera.
Computer System Requirements for Bundled Software
Operating System : Windows Vista / XP (SP2/SP3) / 2000 (SP4)
Other : Sufficient memory to run the operating system
Computer configuration that enables playback of movies on the
YouTube site
Computer configuration that enables upload of movies to the
YouTube site
Operating System : Windows Vista / XP / 2000
Memory : At least 64MB
Hard Disk Drive Space : At least 2MB
Operating System : Windows Vista / XP (SP2/SP3) / 2000 (SP4)
CPU : Pentium III Class
Memory : At least 128MB
Hard Disk Drive Space : At least 180MB
Other : Internet Explorer 6.0 or higher installed
133 Appendix
The tables in this section show the initial default settings that are configured for menu
items (displayed when you press [MENU]) after you reset the camera (page 117).
Menu items depend on whether the camera is in the REC mode or PLAY mode.
A dash (–) indicates an item whose setting is not reset or an item for which there is
no reset setting.
.REC Mode
“REC” Tab
“Quality” Tab
Reset Initial Default Settings
Focus Q (Auto Focus)
CS Off
Self-timer Off
Face Detection Off
Anti Shake Off
AF Area U Spot
easy Mode Off
L/R Key Off
Grid Off
Digital Zoom On
Review On
Icon Help On
Memory
b BEST SHOT:
Off / Flash: On /
Focus: Off / White
Balance: Off / ISO:
Off / AF Area: On /
Metering: Off / CS:
Off / Self-timer:
Off / Flash
Intensity: Off /
Digital Zoom: On /
MF Position: Off /
Zoom Position: Off
Size
10M (3648
x
2736)
Quality
(Snapshots) Normal
Quality
(Movies) STD
EV Shift 0.0
White Balance Auto
ISO Auto
t
»
Metering B Multi
Color Filter Off
Sharpness 0
Saturation 0
Contrast 0
Flash Intensity 0
134 Appendix
“Set Up” Tab
.PLAY Mode
“PLAY” Tab
“Set Up” Tab
The contents of the “Set Up” tab are the same in the REC mode and PLAY mode.
Panel On
Display Wide
Eye-Fi On
Sounds
Startup: Sound 1 /
Half Shutter:
Sound 1 /
Shutter: Sound 1 /
Operation:
Sound 1 /
=Operation:
...////
/
=Play:
...////
Startup Off
File No. Continue
World Time Home
R
P
Timestamp Off
Adjust
Date Style
Language
Sleep 1 min
Auto Power Off 1 min
REC/PLAY Power On
USB Mass Storage
Video Out
Format
Reset
Slideshow
Time: 30 min /
Interval: 3 sec /
Effect: On
DPOF Printing
Protect
Rotation
Resize
Trimming
Dubbing
Copy
135 Appendix
When things don’t go right...
Troubleshooting
Problem Possible Cause and Recommended Action
Power Supply
Power does not
turn on.
1)The battery may not be loaded correctly (page 17).
2)The battery may be dead. Charge the battery (page 15). If the
battery goes dead soon after being charged, it means the
battery has reached the end of its life and needs to be
replaced. Purchase a separately available CASIO NP-60
rechargeable lithium ion battery.
The camera
suddenly powers
down.
1)Auto Power Off may have activated (page 114). Turn power
back on.
2)The battery may be dead. Charge the battery (page 15).
3)The camera’s protection function may have activated
because camera temperature is too high. Turn off the camera
and wait until it cools down before trying to use it again.
Power will not turn
off. Nothing
happens when a
button is pressed.
Remove the battery from the camera and then reload it.
Image Recording
Image is not
recorded when the
shutter button is
pressed.
1)If the camera is in the PLAY mode, press [r] (REC) to enter
the REC mode.
2)If the flash is charging, wait until the charge operation
finishes.
3)If the message “Memory Full” appears, transfer images to
your computer, delete images you no longer need, or use a
different memory card.
Auto Focus does
not focus properly
1)If the lens is dirty, clean it off.
2)The subject may not be in the center of the focus frame when
you compose the image.
3)The subject you are shooting may not be a type that is
compatible with Auto Focus (page 30). Use manual focus
(page 57).
4)You may be moving the camera when shooting. Try shooting
with Anti Shake (page 39) or use a tripod.
136 Appendix
The subject is out
of focus in the
recorded image.
The image may not be focused properly. When composing the
image, make sure the subject is located inside the focus frame.
The flash does not
fire.
1)If ? (Flash Off) is selected as the flash mode, change to
another mode (page 35).
2)If the battery is dead, charge it (page 15).
3)If a BEST SHOT scene that uses ? (Flash Off) is selected,
change to a different flash mode (page 35) or select a
different BEST SHOT scene (page 52).
A red ? (Flash
Off) icon appears
on the monitor
screen and the
flash does not fire.
The flash unit may be malfunctioning. Contact a CASIO service
center or your original retailer. Note that though the flash will not
fire, you still can use the camera for non-flash shots.
Camera powers
down during Self-
timer countdown.
The battery may be dead. Charge the battery (page 15).
The monitor screen
image is out of
focus.
1)You may be using Manual Focus and have not focused the
image. Focus the image (page 57).
2)You may be using ´ (Macro) for scenery or portraits. Use
Auto Focus for scenery and portrait shots (page 57).
3)You may be trying to use Auto Focus or ) (Infinity) when
shooting a close-up shot. Use the ´ (Macro) for close ups
(page 57).
There is a vertical
line in the monitor
screen image.
Shooting a very brightly lit subject can cause a vertical band to
appear in the monitor screen image. This is a CCD
phenomenon known as “vertical smear”, and does not indicate
malfunction of the camera. Note that vertical smear is not
recorded with the image in the case of a snapshot, but it is
recorded in the case of a movie.
There is digital
noise in images.
1)Sensitivity may have been increased automatically for a dark
subject, which increases the chance of digital noise. Use a
light or some other means to illuminate the subject.
2)You may be attempting to shoot in a dark location with ?
(Flash Off) selected, which can increase digital noise and
make images appear coarse. In this case, turn on flash (page
35) or use lights for illumination.
Problem Possible Cause and Recommended Action
137 Appendix
A recorded image
was not saved.
1)Camera power may have been turned off before the save
operation was complete, which will result in the image not
being saved. If the battery indicator shows , charge the
battery as soon as possible (page 18).
2)You may have removed the memory card from the camera
before the save operation was complete, which will result in
the image not being saved. Do not remove the memory card
before the save operation is complete.
Though available
lighting is bright,
the faces of people
in the image are
dark.
Not enough light is reaching the subjects. Change the flash
mode setting to < (Flash On) for daylight synchro flash (page
35), or adjust EV shift to the + side (page 42).
Night shots come
out bad.
Use the following BEST SHOT scenes (page 52) when shooting
at night.
Night Scene (for shooting night scenery only)
Night Scene Portrait (for shooting people against night
scenery)
Subjects are too
dark when shooting
images in a
seashore or ski
area.
Sunlight reflected by water, sand, or snow, can cause
underexposure of images. Change the flash mode setting to <
(Flash On) for daylight synchro flash (page 35), or adjust EV
shift to the + side (page 42).
Digital zoom
(including HD
zoom) does not
work. The zoom
bar indicates zoom
only up to a zoom
factor of 3.0.
1)The digital zoom setting may be turned off. Turn on digital
zoom (page 65).
2)Date stamping may be turned on, which will cause digital
zoom to be disabled. Turn off date stamping (page 112).
The image is out of
focus during movie
recording.
1)Focusing may not be possible because the subject is outside
the focus range. Shoot within the allowable range.
2)The lens may be dirty. Clean the lens (page 124).
Problem Possible Cause and Recommended Action
138 Appendix
Playback
The color of the
playback image is
different from what
appears on the
monitor screen
when shooting.
Sunlight or light from another source may be shining directly
into the lens when you are shooting. Position the camera so
sunlight does not shine directly into the lens.
Images are not
displayed.
This camera cannot display non-DCF images recorded onto a
memory card using another digital camera.
Images cannot be
edited (with
resizing, trimming,
rotation).
Note that you cannot edit the following types of snapshots.
•Movies
Snapshots recorded with another camera
Other
The wrong date
and time are
displayed, or the
wrong date and
time are being
stored along with
image data.
The date and time setting is off. Set the correct date and time
(page 112).
The messages on
the display are in
the wrong
language.
The wrong display language is selected. Change the display
language setting (page 113).
Images cannot be
transferred over a
USB connection.
1)The USB cable may not be connected securely. Check all
connections.
2)The wrong USB communication protocol is selected. Select
the correct USB communication protocol in accordance with
the type of device you are connecting (pages 89, 98).
3)If the camera is not turned on, turn it on.
4)Your computer may not be able to recognize the camera if
you connect via a USB hub. Always connect directly to the
computer’s USB port.
Problem Possible Cause and Recommended Action
139 Appendix
Language selection
screen appears
when the camera is
turned on.
1)You did not configure initial settings after purchasing the
camera or the battery may have been left with a dead battery.
Check the camera setup (pages 19, 113).
2)There may be a problem with the camera’s memory data. If
this is the case, perform the reset operation to initialize the
camera’s setup (page 117). After that, configure each setting.
If the language selection screen does not re-appear when you
turn the camera on, it means that the camera’s memory
management data has been restored.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
The time and date
settings configured
the first time after
purchasing the
camera are reset to
their factory
defaults when
remove the
camera’s battery.
Load the camera’s battery and reconfigure the time and date
settings (page 19). Do not remove the battery from the camera
for at least 24 hours after configuring time and date settings.
After that, the settings will not be reset if you remove the
battery.
If the time and date are reset to their factory default settings
when you remove the battery after it has been loaded for
more than 24 hours, it could mean that the camera’s setting
memory is defective. Contact your retailer or a CASIO
authorized service center.
Problem Possible Cause and Recommended Action
B
140 Appendix
Display Messages
ALERT
The camera’s protection function may have activated
because camera temperature is too high. Turn off the camera
and wait until it cools down before trying to use it again.
Battery is low. Battery power is low.
Card ERROR
There is something wrong with the memory card. Turn off the
camera, remove the memory card and then reload it into the
camera. If this message re-appears when you turn the
camera back on, format the memory card (page 117).
IMPORTANT!
Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a computer
or some other storage device.
Check
connections!
You are attempting to connect the camera to a printer while
the camera’s USB settings are not compatible with the USB
system of the printer (page 82).
Files could not be
saved because
battery is low.
Battery power is low, so an image file could not be saved.
Folder cannot be
created.
You are trying to record a file while there are already 9999
files stored in the 999th folder. If you want to record more,
delete files you no longer need (page 29).
Images are being
transferred.
Stop transfer and
turn off power?
You are attempting to turn off power while image data is being
transferred using the Eye-Fi card (page 103).
LENS ERROR
This message appears and the camera turns off whenever
lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
Load paper! The printer ran out of paper while printing.
Memory Full Memory is full with images you recorded and/or files saved by
editing operations. Delete files you no longer need (page 29).
Printing Error
An error occurred while printing.
The printer is turned off.
The printer generated an error, etc.
Record Error Image compression could not be performed for some reason
during image data storage. Shoot the image again.
141 Appendix
RETRY POWER
ON
The lens came into contact with an obstruction while moving.
The camera will turn off automatically when this message
appears. Remove the obstruction and turn power back on
again.
SYSTEM ERROR Your camera system is corrupted. Contact your retailer or an
authorized CASIO authorized service center.
The card is
locked.
The LOCK switch of the SD or SDHC memory
card loaded in the camera is in the locked
position. You cannot store images to or delete
images from a memory card that is locked.
There are no files. There are no files in built-in memory or on the memory card.
There are no
printing images.
Set up DPOF.
There are currently no files specified for printing. Configure
the required DPOF settings (page 84).
This card is not
formatted.
The memory card loaded in the camera is not formatted.
Format the memory card (page 117).
This file cannot be
played.
The file you are trying to access is corrupted or is a type that
cannot be displayed by this camera.
This function
cannot be used.
You attempted to copy images from built-in memory to a
memory card while there is no memory card loaded in the
camera (page 80).
LOCK
142 Appendix
Snapshot
Number of Snapshots/Movie Recording Time/
Voice Recording Time
Image Size
(Pixels)
Image
Quality
Approximate
Image File
Size
Built-in Memory
Snapshot
Recording
Capacity
SD Memory Card
(1GB) Snapshot
Recording
Capacity
10M
(3648x2736)
Fine 6.4 MB 2 150
Normal 3.38 MB 5 285
Economy 2.27 MB 7 425
3:2
(3648x2432)
Fine 5.6 MB 3 172
Normal 2.97 MB 5 325
Economy 2 MB 8 483
16:9
(3648x2048)
Fine 4.59 MB 3 210
Normal 2.46 MB 7 392
Economy 1.67 MB 10 578
7M
(3072x2304)
Fine 4.3 MB 4 224
Normal 2.31 MB 7 418
Economy 1.57 MB 11 615
4M
(2304x1728)
Fine 2.5 MB 6 386
Normal 1.4 MB 12 690
Economy 900 KB 19 1073
2M
(1600x1200)
Fine 1.26 MB 13 766
Normal 790 KB 21 1223
Economy 470 KB 36 2056
VGA
(640x480)
Fine 330 KB 52 2928
Normal 190 KB 91 5085
Economy 140 KB 123 6902
143 Appendix
Movies
Voice Recording
*Snapshot, movie recording capacity, and voice recording capacity values are
approximate and intended for reference only. Actual capacity depends on image
contents.
*File size and data rate values are approximate and intended for reference only. Actual
values depend on the type of image being shot.
*The above values are based on use of a PRO HIGH SPEED SD memory card
(Panasonic Corporation). The number of images you can save depends on the type of
memory card you are using.
*When using a memory card with a different capacity, calculate the number of images as a
percentage of 1GB.
*Each movie can be up to 10 minutes long. Movie recording stops automatically after 10
minutes of recording.
Image
Quality
(Pixels)
Approximate Data
Rate (Frame Rate)
Built-in
Memory Movie
Recording
Capacity
SD Memory
Card (1GB)
Movie
Recording
Capacity
File Size of
1-minute
Movie
WIDE
848x480
12.5 Megabits/second
(30 frames/second) 9 seconds 10 minutes
8 seconds 93.1 MB
STD
640x480
10.6 Megabits/second
(30 frames/second) 11 seconds 11 minutes
43 seconds 79.0 MB
LP
320x240
2.7 Megabits/second
(15 frames/second) 46 seconds 46 minutes
53 seconds 19.9 MB
YouTube
640x480
10.6 Megabits/second
(30 frames/second) 11 seconds 11 minutes
43 seconds 79.0 MB
File Format Maximum
File Size File Size
Built-in Memory
Voice Recording
Capacity
SD Memory Card
(1GB) Voice
Recording
Capacity
WAV
IMA-ADPCM 4 GB 5.5 KB 53 minutes
11 seconds
49 hours
31 minutes
144 Appendix
Specifications
File Format Snapshots:
JPEG (Exif Version 2.2); DCF 1.0 standard; DPOF compliant
Movies:
Motion JPEG AVI, IMA-ADPCM audio (monaural)
Audio (Voice Recording):
WAV (monaural)
Recording Media Built-in Memory (Image Storage Area: 17.8MB)
SD/SDHC
Recorded Image Sizes Snapshot:
10M (3648x2736), 3:2 (3648x2432), 16:9 (3648x2048),
7M (3072x2304), 4M (2304x1728), 2M (1600x1200),
VGA (640x480)
Movies:
WIDE (848x480), STD (640x480), LP (320x240),
YouTube (640x480)
Delete 1 file; all files (with memory protection feature)
Effective Pixels 10.1 Megapixels
Imaging Element Size: 1/2.5-inch square pixel CCD
Total Pixels: 10.35 Megapixels
Lens/Focal Distance F2.8 (W) to 5.2 (T) f= 6.2 to 18.6 mm
(equivalent to 37.5 to 112.5 mm in 35 mm format)
Six lenses in five groups, including aspherical lens.
Zoom 3X optical zoom, 4X digital zoom (12X in combination with
optical zoom)
17.1X maximum HD Zoom (in combination with optical zoom,
VGA size)
Focusing Contrast Detection Auto Focus
Focus Modes:
Auto Focus, Macro Focus, Pan Focus, Infinity, Manual Focus
AF Area: Spot, Multi
Approximate Focus
(Snapshot)
(From Lens Surface)
Auto Focus: 40 cm to 9 (1.3' to 9) (Wide Angle)
Macro Focus: 15 cm to 50 cm (5.9" to 19.7") (Wide Angle)
Infinity: 9 (Wide Angle)
Manual: 15 cm to 9 (5.9" to 9) (Wide Angle)
*Range is affected by optical zoom.
Metering Multi-pattern, center weighted, and spot by imaging element
Exposure Control Program AE
Exposure
Compensation
–2.0 EV to +2.0 EV (in 1/3EV steps)
Shutter CCD shutter, mechanical shutter
145 Appendix
Shutter Speed Snapshot (Auto): 1/2 to 1/2000 second
Snapshot (Night Scene): 4 to 1/2000 second
*May differ due to the camera setup.
Aperture Value F2.8 (W) to F8.0 (W) (When used with ND filter)
*Using optical zoom changes the aperture value.
White Balance Auto, Daylight, Overcast, Shade, Day White Fluorescent,
Daylight Fluorescent, Tungsten, Manual WB
Sensitivity (Standard
Output Sensitivity,
Recommended
Exposure Index)
Snapshots:
Auto, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600
Movies: Auto
Self-timer Approximate Trigger Times:
10 seconds, 2 seconds, Triple Self-timer
Flash Modes Auto, Off, On, Red-eye reduction
Flash Range (ISO
Sensitivity: Auto)
Wide Angle: 0.15 m to 2.8 m (0.5' to 9.2')
Telephoto: 0.4 m to 1.5 m (1.3' to 4.9')
*Range is affected by optical zoom.
Flash Charging Time Approximately 6 seconds maximum
Recording Snapshots; Macro; Self-timer; Continuous Shutter (Normal
Speed CS); BEST SHOT; Face Detection; easy Mode; Movies
(normal movie and For YouTube) (with monaural audio); Audio
(Voice Recording)
Approximate
Maximum Audio
Recording Times
After Recording: 30 seconds per image
Voice Recording: 53 minutes 11 seconds (when using built-in
memory)
Monitor Screen 2.7-inch wide TFT color LCD
114,960 (479x240) dots
Viewfinder Monitor Screen
Timekeeping Function Built-in quartz digital clock
Date and Time: Recorded with image data
With time stamp function
Auto Calendar: To 2049
World Time 162 cities in 32 time zones
City name, date, time, summer time
Input/Output
Terminals
USB/AV port, USB compatible
Microphone Monaural
Speaker Monaural
Power Requirements Rechargeable lithium ion battery (NP-60) x1
146 Appendix
Approximate Battery Life
All of the values provided below represent the approximate amount of time under
normal temperature (23°C (73°F)) before the camera turns off. These values are not
guaranteed. Low temperatures shorten battery life.
Battery: NP-60 (Rated Capacity: 720 mAh)
Recording Medium:
1GB SD memory card (PRO HIGH SPEED (Panasonic Corporation))
Measurement Conditions
*1 Approximate number of shots (CIPA) (Operating Time)
In accordance with CIPA (Camera and Imaging Products Association) standards
Normal temperature (23°C (73°F)), monitor on, zoom operation between full wide and
full telephoto every 30 seconds, during which two images are shot with flash; power
turned off and back on every time 10 images are shot.
*2 Approximate playback time
Standard temperature (23°C (73°F)), one-image scroll approximately every 10 seconds
*3 Approximate continuous recording time
The above values are based a new battery, starting from a full charge. Repeated
charging shortens battery life.
Frequency of flash, zoom, and Auto Focus usage, and the time the camera is on
greatly affects recording time and number of shots values.
Number of Shots (CIPA) (Operating Time)*1200 shots
Continuous Playback (Snapshots)*24 hours 10 minutes
Approximate continuous movie recording time 1 hour 40 minutes
Continuous Voice Recording*34 hours
Power Consumption 3.7 V DC, Approximately 3.4 W
Dimensions 92.5 (W) x 55 (H) x 23.2 (D) mm
(3.6" (W) x 2.2" (H) x 0.9" (D))
(excluding projections; 20.4 mm (0.8") at thinnest point)
Weight Approximately 125 g (4.4 oz)
(excluding battery and bundled accessories)
147 Appendix
.Rechargeable lithium ion battery (NP-60)
.Charger unit (BC-60L)
Power cord precautions for use in Singapore
The power cord set is not supplied. The power cord used must comply with
relevant national and/or international standards.
Rated Voltage 3.7 V
Rated Capacitance 720 mAh
Operating Temperature 0 to 40°C (32 to 104°F)
Dimensions 37.9 (W) x 42.3 (H) x 5.0 (D) mm
(1.49" (W) x 1.67" (H) x 0.20" (D))
Weight Approximately 18 g (0.63 oz)
Input Power 100 to 240 V AC, 80 mA, 50/60 Hz
Output Power 4.2 V DC, 600 mA
Operating Temperature 5 to 35°C (41 to 95°F)
Supported Battery Type Rechargeable lithium ion battery (NP-60)
Charging Time 90 minutes
Dimensions 60 (W) x 20 (H) x 86 (D) mm
(2.4" (W) x 0.79" (H) x 3.4" (D)) (excluding projections)
Weight Approximately 62 g (2.2 oz)
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
MA0905-BM10
128

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio exilim ex z29 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio exilim ex z29 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Casio exilim ex z29

Casio exilim ex z29 Gebruiksaanwijzing - Nederlands - 148 pagina's

Casio exilim ex z29 Gebruiksaanwijzing - Deutsch - 148 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info