543646
1
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
Dual Projection System
XJ-SK600
Dual Projection System
XJ-SK600
CkJEGFSISwRPoTrDPlFiCzNrChK
MA1303-A
必ず本システムに付属の「YA-S10セットアップガイド」の注意事項をお読みになって
からご使用ください。
この説明書は、お読みになった後も大切に保管してください。
本書の最新版は左記ウェブサイトに公開されております。
Be sure to read the precautions in the “YA-S10 Setup Guide” that comes with the
Dual Projection System.
Be sure to keep all user documentation handy for future reference.
To obtain the latest version of this manual visit the website at the URL to the left.
Lesen Sie unbedingt die wichtigen Hinweise und Vorsichtsmaßregeln in der zum
Dualprojektionssystem mitgelieferten „YA-S10 Setup-Anleitung”.
Bitte bewahren Sie die gesamte Benutzerdokumentation für späteres
Nachschlagen auf.
Für die neueste Ausgabe dieser Bedienungsanleitung besuchen Sie bitte unsere
Website unter der links angegebenen URL.
Veuillez lire les précautions dans le « Guide d’installation de la YA-S10 » fourni
avec le Système de projection double.
Conservez la documentation à portée de main pour toute référence future.
Pour obtenir la toute dernière version de ce manuel, consultez le site à l’adresse
indiquée à gauche.
Asegúrese de leer las precauciones en la “Guía de configuración de YA-S10”
suministrada con el Sistema de proyección dual.
Asegúrese de tener a mano toda la documentación del usuario para futuras
consultas.
Para obtener la versión más reciente de este manual, visite nuestro sitio web en la
URL a la izquierda.
Assicurarsi di leggere le avvertenze riportate nella “Guida di setup di YA-S10”
fornita in dotazione con il Sistema di proiezione duplice.
Conservare l’intera documentazione dell’utente a portata di mano per riferimenti
futuri.
Per ottenere la versione più aggiornata di questo manuale, visitare il sito web
all’URL riportato alla sinistra.
Se noga till att läsa säkerhetsföreskrifterna i ”YA-S10 Installationshandbok” som
medföljer projektorn för dubbelprojektion.
Förvara all användardokumentation nära till hands för framtida referens.
Den senaste versionen av denna installationshandbok kan hämtas från
webbplatsen med den URL-adress som anges till vänster.
Certifique-se de ler as precauções no “Guia de Configuração da YA-S10” que vem
com o Sistema de Projeção Dual.
Certifique-se de guardar toda a documentação do usuário à mão para futuras
referências.
Para obter a última versão deste manual, visite o site no endereço URL à esquerda.
U moet de voorzorgen lezen in de “YA-S10 Instelgids” die wordt meegeleverd met
het Tweevoudig projectiesysteem.
Bewaar alle documentatie op een veilige plaats voor latere naslag.
Bezoek de hier links vermelde website om de nieuwste versie van de handleiding
te verkrijgen.
Lue kaksoisprojisointijärjestelmän mukana toimitetun YA-S10-laitteen
Asetusoppaan varoitukset.
Muista pitää kaikki käyttöä koskevat asiakirjat lähettyvillä tulevaa tarvetta varten.
Saat uusimman version tästä oppaasta vasemmalla olevasta Internet-osoitteesta.
Pass på å lese forholdsreglene i “Oppsettguide YA-S10” som følger med det doble
projeksjonssystemet.
Pass på å oppbevare all brukerdokumentasjon lett tilgjenglig for fremtidig bruk.
For å få den nyeste utgaven av denne bruksanvisningen, besøk nettsiden ved bruk
av URL-en til venstre.
セットアップガイド
日本語
Setup Guide
English
Setup-Anleitung
Deutsch
Guide d’installation
Français
Guía de configuración
Español
Guida di setup
Italiano
Installationshandbok
Svenska
Guia de Configuração
Português
Instelgids
Nederlands
Asetusopas
Suomi
Oppsettguide
Norsk
http://world.casio.com/manual/projector/
この装置は、クラスB情
報技術装置です。この装
置は、家庭環境で使用す
ることを目的としてい
ますが、この装置がラジ
オやテレビジョン受信
機に近接して使用され
ると、受信障害を引き起
こすことがあります。
扱説明書に従って正し
い取り扱いをしてくだ
さい。 VCCI-B
この装置は、高調波電流
規格JIS C 61000-3-2
に適合しています。
E-1
XJ-SK600 Overview.................................... E-2
Unpacking ......................................................E-2
General Guide ................................................E-3
Getting Ready ............................................. E-4
Installation Location .......................................E-4
Wiring .............................................................E-7
Preparing the Remote Controllers..................E-8
Configuring the Initial Settings of
the Two Projectors..................................... E-8
Configuring Initial Control Box Settings ...... E-10
Adjusting the Positions of
the Two Projectors................................... E-11
Product Specifications .............................E-15
Terms and Conventions
In this manual, the entire XJ-SK600 Dual Projection System (the two projectors, Geometric Correction
Box, and the cabinet in which everything is contained) is referred to as the “Projector System”.
User Documentation
This manual explains how to set up the XJ-SK600 Dual Projection System, and shows how to configure
the initial settings of the two projectors.
z After completing the setup procedures described in this manual, use the YA-S10 Geometric
Correction Box (referred to as “Control Box” in this manual) to shape and adjust the projection images
of the two projectors. For information about how to do this, see the YA-S10 Setup Guide.
z For information about operating the Projector System after setting it up, refer to the YA-S10 User’s
Guide, which you can download from the website below.
http://world.casio.com/manual/projector/
z For information about individual projector operations, refer to the manuals below.
z DATA PROJECTOR Setup Guide (Booklet)
z “User’s Guide” (Download from the website above. With some projector models, the User’s Guide
is also provided on a CD-ROM that comes with the projector.)
z HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing, LLC.
z Other company and product names may be registered trademarks or trademarks of their respective
owners.
z The contents of this User’s Guide are subject to change without notice.
z Copying of this manual, either in part or its entirety, is forbidden. You are allowed to use this manual
for your own personal use. Any other use is forbidden without the permission of CASIO COMPUTER
CO., LTD.
z CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third parties
arising out of the use of this product or this manual.
z CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of data
caused by malfunction or maintenance of this product, or due to any other reason.
z The sample screens shown in this manual are for illustrative purposes only, and may not be exactly
the same as the screens actually produced by the product.
Contents
E-2
XJ-SK600 Overview
The XJ-SK600 Projector System uses a Control Box to sync two projectors so their output looks and
acts as if it is coming from a single projector. A powerful collection of projected image shaping functions,
enables clear image projection not only onto a flat screen, but also onto curved and irregular surfaces.
Important!
Important!
Important!
z After the Projector System has been installed and adjusted, do not alter the cabinet position or
positions of the projectors inside the cabinet, the projector zoom ring settings, or the screen
position.
Any changes to the above will require re-adjustment of the Projector System.
z When installing the Projector System or when adjusting the cabinet, take care to avoid getting
your hands pinched under the cabinet or by door in the back of the cabinet.
Before getting into setup of the Projector System, take a few moments to make sure that all of the items
listed below are included.
z XJ-SK600 Setup Guide (This manual)
z Cabinet*
1
z Feet ×4 (for placement on a flat surface)
z Control Box (YA-S10)*
1
z Projectors (XJ-M250) ×2*
1
z Control Box remote controller (YT-200)
z Control Box AC adapter and power cord
z Projector remote controller (YT-120)
z Projector power cords ×2
z Remote controller batteries (AAA-size, test use) ×4
z HDMI cables ×2
z RS-232C cables ×2
z Mini D-Sub Cable
z DATA PROJECTOR CD-ROM (Contains projector User’s Guide)*
2
z DATA PROJECTOR Setup Guide
z DATA PROJECTOR “Read this first” Sheet
z Warranty Certificate
Unpacking
*1 The Control Box and two projectors are installed in the cabinet at the factory.
*2 Some XJ-SK600 models do not come with a CD-ROM. If your projector does not come with a
CD-ROM, download the User’s Guide from the CASIO projector website. See “User
Documentation” (page E-1) for more information.
E-3
XJ-SK600 Overview
General Guide
Cabinet
Control BoxProjectors
Zoom ring
Focus ring
Smaller
Larger
E-4
Getting Ready
The Projector System can be placed on a flat surface or it can be ceiling mounted.
Placing the Projector System on a Flat Surface
After attaching the feet to the cabinet, place the cabinet onto a table, desk, or stand or other level and
firm surface, making sure you allow enough space around it. The nearby illustration shows how the
Projector System should be oriented relative to the screen to achieve optimum projection.
Installation Location
When placing the Projector System on a flat
surface, you need to install the four feet on the
bottom of the cabinet.
Screw each of the feet into the holes at the
corners on the bottom of the cabinet.
Screen
For information about the relationship between the
distance between the projectors and the screen and the
size of the projected image, see “Projection Distance
and Screen Size” in the projector User’s Guide. For
information about the User’s Guide, see “User
Documentation” (page E-1) in this manual.
E-5
Getting Ready
Location Precautions
z Use a conveniently located power outlet that you can
reach easily when you need to unplug the power cord.
z Make sure there is nothing inside the area (within 30 cm
(11.8 inches) of the Projector System) indicated by the
nearby illustration. Take particular care to ensure that
there is nothing blocking the flow of air from the
projector exhaust vents.
z Airflow from air conditioning equipment redirecting heat
being exhausted from the area around a projector lens
can cause heat ripples to appear in the projected
image. If this happens, adjust the airflow of the air
conditioning equipment or move the Projector System.
Intake vents
Exhaust vents
Projector
Cabinet
Airflow vents
30cm (11.8") 30cm (11.8")
30cm (11.8")
30cm (11.8")
Getting Ready
E-6
Ceiling Installation
The Projector System can be hung from a ceiling. The Projector System can be ceiling mounted in an
inverse (upside down) configuration or a vertical configuration.
Important!
Important!
Important!
z To protect against sudden accidental dropping of the Projector System from a ceiling mount
configuration, be sure to secure the cabinet to ceiling fixtures with wires or some other
adequate means.
z When ceiling mounting in a vertical configuration, make sure there is enough work space to
allow access to the fixing screws (two locations marked <A> in the illustration) on the ceiling
side of the cabinet. These screws will need to be loosened and tightened during later
adjustment work.
Contact your original retailer for full details about ceiling mounting.
Important!
Important!
Important!
z When hanging the Projector System from a ceiling, make sure that it is at least one meter away
from fire detectors, fire alarms, and other fire protection devices. Locating the Projector System
too close to a fire protection device creates the risk of mis-operation of the device due to warm
air exhausted from the Projector System. Also, avoid locating the Projector System close to
fluorescent lights or other strong light sources. Bright light can shorten the operating range of
the remote controller or even make remote control impossible. When selecting a location for
the Projector System, be sure to test for proper operation of the remote controller.
z The vertical and horizontal orientation of the projected image is reversed from the normal
configuration when projecting from a Projector System hung from the ceiling. You need to
change the setup of the Projector System in order to correct for this. For more information, see
“Configuring the Initial Settings of the Two Projectors” (page E-8) in this manual.
Inverse Installation Vertical Installation
Use four M4 screws to fasten the bottom of the
cabinet to the ceiling mount bracket.
Use four M4 screws to fasten the left side of the
cabinet to the ceiling mount bracket.
M4 screws
M4 screws
M4 screw installation positions
<A>
E-7
Getting Ready
Wire the Control Box and two projectors inside the Cabinet as shown in the illustration below.
When connecting the Control Box to a projector using a supplied HDMI cable, connect the plug of the
cable that is nearest the ferrite core to the HDMI port of the Control Box.
NOTE
z The HDMI cables and RS-232C cables that connect the Control Box to the projectors can be stored in
Storage Box (A) when they are unneeded. The Control Box AC adapter can be stored in Storage Box
(B). See page E-15 of this manual for an illustration that shows the locations of Storage Box (A) and
Storage Box (B).
Wiring
*1 To control the Projector System from an external device over a LAN, use a commercially available
LAN cable to connect this terminal to the LAN terminal of the external device.
*2 To control the Projector System from an external device over an RS-232C connection, use a
commercially available serial cable (cross) to connect this port to the serial port of the external
device.
Projector A
(Side nearest the Control Box)
Use the supplied
power cord to plug
into an outlet.
Control Box side
Use a supplied RS-232C
cable to connect.
Use a supplied HDMI
cable to connect.
Projector B
(Side furthest from the Control Box)
Ferrite core
Connect the supplied AC adapter and
plug it into a power outlet.
Connect to the RGB output terminal (using the
included D-sub mini cable or a commercially
available cable) or the component output
terminal (using a commercially available cable)
of the image source device.
*1 *2
Control Box back
Use a commercially available HDMI cable to
connect to the HDMI output port of an
image source device.
Getting Ready
E-8
Load two AAA-size alkaline batteries into each of the remote controllers: one YT-200 Control Box remote
controller, one YT-120 projector remote controller. Batteries are provided with the Projector System.
To load batteries: Open the battery cover on the back of a remote controller. Load the batteries making
sure their poles (+/–) are facing in the correct directions. Finally, replace the battery cover.
Important!
Important!
Important!
z To avoid running down the battery, store the remote control unit so its keys are not pressed
inadvertently.
z When batteries go dead, remove them as soon as possible and replace them with two new
AAA-size alkaline batteries.
The initial settings of each projector need to be configured individually.
z Perform the procedure below after placing the Projector System in the location where it will be used,
after connecting cables, and after preparing the remote controllers.
z For information about which projector is Projector A and which one is Projector B, see “Wiring” (page
E-7).
To configuring the initial settings of the two projectors
1. Unplug the power cord of Projector B from the power outlet so only Projector A is
plugged in.
2. Remove the Projector A lens cover.
3. On the remote controller, press the [P] (Power) key to turn on Projector A.
4. After projection starts, use the Projector A focus ring to focus the projected image.
5. On the “Language” screen that appears, select the display language you want to
use.
6. On the remote controller, press the [INPUT] key. On the “Input” dialog box that
appears, select “HDMI” and then press the [ENTER] key.
Preparing the Remote Controllers
Configuring the Initial Settings of the Two Projectors
Perform the operations below using the projector remote controller (YT-120). Note that these
operations cannot be performed using the Control Box remote controller (YT-200).
E-9
Getting Ready
7. On the remote controller, press the [MENU] key to display the setup menu, and then
configure the settings below in the indicated sequence.
z If the Projector System will be used in an inverted ceiling mount configuration, select “On” for the
“Screen Settings
3
Ceiling Mount” setting.
z If the Projector System will be used in a rear projection (projecting from behind the screen)
configuration, select “Rear” for the “Screen Settings
3
Projection Mode” setting.
z If the Projector System will be used in a location at an elevation of 1,500 to 2,000 meters, select
“On” for the “Option Settings 2
3
High Altitude” setting.
8. Press the [P] (Power) key twice to turn off Projector A.
9. Unplug the power cord of Projector A from the power outlet and plug in Projector B.
10.
Repeat the above steps 2 through 8 on Projector B.
11.
Plug the power cord of Projector A into the power outlet.
Setting Item Setting
(1) Option Settings 1
3
Auto Keystone Correction Off
(2) Screen Settings
3
Keystone Correction 0
(3) Screen Settings
3
No Signal Screen Black
(4) Input Settings
3
Signal Name Indicator Off
(5) Option Settings 1
3
Auto Power Off Off
Getting Ready
E-10
After you finish configuring the initial settings of the two projectors, perform the procedure below to
configure initial Control Box settings.
To configure initial Control Box settings
1. Press the remote controller [ALL] key (or [1] key) to turn on Control Box power.
z This also turns on the two projectors linked to the Control Box.
2. On the remote controller, press the [MENU] key to display the setup menu.
z Under initial default settings, menus are displayed in English.
3. Select “Option Settings” and then “Language”, and then use the [U] and [I] keys to
select the language you want.
4. Configure the settings below as required. For details about each setting, refer to the
“YA-S10 User’s Guide”.
z Option Settings
3
Eco Mode
z Image Properties
3
Color Mode
z Option Settings
3
Remote Power Numbers
5. Next, perform the procedure under “Adjusting the Positions of the Two Projectors”
(page E-11).
Control Box Power On/Off
The Control Box remote controller has five power keys. Four of them are numbered from [1] to [4], and
the fifth one is marked [ALL]. This allows power on/off control of multiple Control Boxes in the same
location.
z Pressing the [ALL] key turns on all of the Control Boxes.
z Keys [1] through [4] control the Control Boxes that are assigned the corresponding number with the
“Option Settings
3
Remote Power Numbers” setting.
Configuring Initial Control Box Settings
Perform the operations below using the Control Box remote controller (YT-200). Note that these
operations cannot be performed using the projector remote controller (YT-120).
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio XJ-SK600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio XJ-SK600 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Casio XJ-SK600

Casio XJ-SK600 Gebruiksaanwijzing - Deutsch - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info