Handleiding Casio WK-210 (pagina 59 van 75) (Engels)

586839

Verklein

Vergroot

Pagina terug

1/75

Pagina verder

GUÍA DEL USUARIO

USER’S GUIDE

WK210ES1A

Guarde toda la información para futuras consultas.

Please keep all information for future reference.

Precauciones de seguridad

Antes de intentar usar el teclado, asegúrese de leer

las “Precauciones de seguridad” separadas.

Safety Precautions

Before trying to use the keyboard, be sure to read the

separate “Safety Precautions”.

EnglishEspañol

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

Declaration of Conformity

Model Number: WK-210

Trade Name: CASIO COMPUTER CO., LTD.

Responsible party: CASIO AMERICA, INC.

Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801

Telephone number: 973-361-5400

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

English

E-1

Important!

Please note the following important information before using this product.

• Before using the optional AC Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check

the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is

seriously damaged.

• Never attempt to recharge batteries.

• Do not use rechargeable batteries.

• Never mix old batteries with new ones.

• Use recommended batteries or equivalent types.

• Always make sure that positive (+) and negative (–) poles are facing correctly as indicated near the battery compartment.

• Replace batteries as soon as possible after any sign they are getting weak.

• Do not short-circuit the battery terminals.

• The product is not intended for children under 3 years.

• Use only a CASIO AD-5 adaptor.

• The AC adaptor is not a toy.

• Be sure to disconnect the AC adaptor before cleaning the product.

This mark applies in EU countries only.

Manufacturer:

CASIO COMPUTER CO.,LTD.

6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan

Responsible within the European Union:

CASIO EUROPE GmbH

Casio-Platz 1, 22848 Norderstedt, Germany

● Company and product names used in this manual may be registered trademarks of others.

● Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal

use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.

● IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,

DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE

USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

● The contents of this manual are subject to change without notice.

E-2

Contents

General Guide ............................. E-4

Using the 10-key Pad (

) .................................E-6

FUNCTION Button (

) Functions .....................E-6

Getting Ready to Play ................ E-8

Preparing the Music Stand .................................E-8

Power Supply .....................................................E-8

Playing the Digital Keyboard..... E-9

Turning on Power and Playing ...........................E-9

Using Headphones .............................................E-9

Changing Keyboard Response to

Touch Pressure (Touch Response)..................E-10

Adjusting Display Contrast ...............................E-10

Using the Voice Pads .......................................E-11

Using the Metronome .......................................E-12

Controlling the

Keyboard Sounds..................... E-14

Select from a variety of

musical instrument sounds ...............................E-14

Layering Two Tones.........................................E-15

Splitting the Keyboard between

Two Different Tones .........................................E-15

Using Reverb....................................................E-16

Using Chorus....................................................E-16

Using a Pedal ...................................................E-17

Changing the Pitch

(Transpose, Tuning, Octave Shift)....................E-17

Sampling Sounds and

Playing Them on the

Digital Keyboard ....................... E-19

Connection and Preparation.............................E-19

Sampling and Playing a Melody Sound

(Melody Sampling) ...........................................E-20

Incorporating a Sampled Sound into a

Drum Set (Drum Sampling) ..............................E-22

Other Sampling Functions................................E-24

Playing Built-in Songs ............. E-27

Playing the Demo Songs..................................E-27

Playing Back a Particular Song ........................E-28

Increasing the Selection of Songs

(User Songs) ....................................................E-30

Using Built-in Songs to

Master Keyboard Play .............. E-31

Phrases............................................................ E-31

Step Up Lesson Flow....................................... E-31

Selecting the Song, Phrase, and

Part You Want to Practice................................ E-32

Lessons 1, 2, and 3.......................................... E-33

Lesson Settings ............................................... E-34

Using Auto Step Up Lesson............................. E-36

Music Challenge

Keyboard Game ........................ E-37

Using Auto Accompaniment.... E-38

Playing the Rhythm Part Only.......................... E-38

Playing All Parts............................................... E-39

Using Auto Accompaniment Effectively ........... E-41

Using One-Touch Preset ................................. E-42

Using Auto Harmonize ..................................... E-43

Editing Auto Accompaniment

Patterns...................................... E-44

Saving Keyboard Setups to

Registration Memory ................ E-48

To save a setup to registration memory........... E-49

To recall a setup from registration memory ..... E-49

Recording Your

Keyboard Play........................... E-50

Recording and Playing Back

Keyboard Play.................................................. E-50

Using Tracks to Record and Mix Parts ............ E-51

Recording Two or More Songs, and

Selecting One for Playback.............................. E-53

Recording while Playing Along with a

Built-in Song..................................................... E-53

Saving Recorded Data on an

External Device................................................ E-54

English

Contents

E-3

Other Useful Digital Keyboard

Functions .................................. E-55

Changing the Scale of the Keyboard................E-55

Using Music Preset ..........................................E-56

Using the Arpeggiator.......................................E-56

Deleting User Song Data..................................E-57

Deleting All Data in

Digital Keyboard Memory .................................E-58

Connecting External Devices

... E-59

Connecting a Computer ...................................E-59

MIDI Settings....................................................E-60

Storing and Loading

Digital Keyboard Memory Data.........................E-62

Connecting to Audio Equipment .......................E-63

Reference .................................. E-64

Troubleshooting................................................E-64

Specifications ...................................................E-66

Operating Precautions......................................E-67

Error Messages ................................................E-68

Song List ..........................................................E-69

Chord Example List ..........................................E-70

MIDI Implementation Chart

Included Accessories

● Music Stand

● Song Book

● Leaflets

Items included as accessories are subject to change without notice.

Separately Available Accessories

• You can get information about accessories that

are separately for this product from the CASIO

catalog available from your retailer, and from the

CASIO website at the following URL.

http://world.casio.com/

• Safety Precautions

• Appendix

• Other (Warranty, etc.)

E-4

General Guide

• In this manual, the term “Digital Keyboard” refers to the WK-210.

• In this manual, buttons and other controllers are identified using the numbers shown below.

132

bt ck cl cm cn co cp cq cr cs ct

9bkblbm bn

dk dkdl dm dn do dp

dq dr

English

General Guide

E-5

POWER button ☞E-9, 26, 46, 49, 51, 62

MAIN VOLUME knob ☞E-9

MIC VOLUME knob ☞E-19

PRESET SCALE button ☞E-55

RECORDER button ☞E-50, 51, 52, 53, 54

RHYTHM EDITOR button ☞E-44, 45

METRONOME, BEAT button ☞E-12

INTRO, REPEAT button ☞E-29, 34, 41, 44, 45

NORMAL/FILL-IN, REW button

☞E-28, 32, 38, 41, 44, 45

VARIATION/FILL-IN, FF button

☞E-28, 32, 41, 44, 45

SYNCHRO/ENDING, PAUSE button

☞E-28, 41, 42, 44, 45

START/STOP, PLAY/STOP button

☞E-27, 28, 30, 33, 34, 38, 50, 52, 53, 54

ACCOMP ON/OFF, CHORDS, PART SELECT

button ☞E-27, 30, 32, 34, 39, 43, 44, 45, 54, 61

TEMPO buttons ☞E-13, 29, 42

TONE, MUSIC PRESET button

☞E-9, 14, 20, 22, 23, 24, 26, 56

RHYTHM, ONE TOUCH PRESET button

☞E-11, 14, 21, 22, 24, 38, 42, 45, 49, 50, 53, 55

SONG BANK button ☞E-28, 30, 32, 37, 53

Number buttons, [–]

[+] buttons ☞E-6

BANK, PAD SET SELECT, CHORD/TR1,

LISTEN button ☞E-11, 21, 33, 48, 49

Area1, VOICE PAD1, TR2, WATCH button

☞E-11, 21, 33, 48, 49, 52

Area2, VOICE PAD2, TR3, REMEMBER button

☞E-11, 21, 34, 48, 49, 52

Area3, VOICE PAD3, TR4, NEXT button

☞E-11, 21, 32, 48, 49, 52

Area4, VOICE PAD4, TR5, AUTO button

☞E-11, 21, 36, 48, 49, 52

STORE, VOICE PAD5, TR6, MUSIC CHALLENGE

button ☞E-11, 21, 37, 49, 52

SPLIT button ☞E-15, 16

LAYER button ☞E-15, 18

AUTO HARMONIZE/ARPEGGIATOR, TYPE button

☞E-43, 56, 57

SAMPLING button ☞E-11, 20, 21, 22, 23, 49

FUNCTION button ☞E-6

Speakers

Song Bank list

Music Preset list

Rhythm list

Display

Tone list

CHORD root names ☞E-39

Percussion instrument list ☞E-14

USB port ☞E-59

SUSTAIN/ASSIGNABLE JACK ☞E-17

PHONES/OUTPUT jack ☞E-9, 63

AUDIO IN jack ☞E-19, 63

DC 9V terminal ☞E-8

MIC IN jack ☞E-19

dt ek enemel

General Guide

E-6

Use the number buttons and the [–] and [+] buttons to change

the settings of the parameters that appear in the upper left

area of the display.

Use the number buttons to enter numbers and values.

• Enter the same number of digits as the currently displayed

value.

Example: To enter tone number 001, input 0 3 0 3 1.

• Negative values cannot be input using the number buttons.

Use [–] (decrease) and [+] (increase) instead.

You can use the [–] (decrease) and [+] (increase) buttons to

change the displayed number or value.

• Holding down either button scrolls the displayed setting.

• Pressing both buttons at the same time will revert to the

initial default setting or the recommended setting.

You can use the FUNCTION button (

) to adjust the reverb

effect, to delete data, and to perform a wide range of other

Digital Keyboard operations.

Press

to display the function menu.

Use the

(10-key) [4] (o) and [6] (p) keys

to display the function you want.

• You can exit the function menu by pressing

• After selecting functions 8 through 12, press the

(10-key) [7] (ENTER) key to display the menu item’s

submenu. Then use [4] (o) and [6] (p) to select an

item. You can exit a submenu by pressing the

(10-key) [9] (EXIT) key.

Refer to the indicated pages for details about

each function.

Using the 10-key Pad (

)

Number Buttons

[–] and [+] Buttons

St .GrPno

Setting

FUNCTION Button (

) Functions

To select a function

English

General Guide

E-7

• The tone and other parameters revert to their initial

defaults whenever you turn on power (page E-9).

Function Display

See

Page

1 Transpose Trans. E-17

2 Accompaniment Volume AcompVol E-42

3 Song Volume Song Vol E-30

4 Touch Response Touch E-10

5 Tuning Tune E-17

6 Reverb Reverb E-16

7 Chorus Chorus E-16

8 Sampling SAMPLING

Automatic Sampling Start AutoStrt E-24

Automatic Sampling Stop AutoStop E-25

Sampled Tone Protect (Protect) E-26

9 Step Up Lesson LESSON

Voice Fingering Guide Speak E-34

Note Guide NoteGuid E-35

Performance Evaluation Scoring E-35

Phrase Length PhraseLn E-35

10 Other Settings OTHER

Arpeggiator Hold ArpegHld E-57

Pedal Effect Jack E-17

Accompaniment Scale AcompScl E-55

LCD Contrast Contrast E-10

11 MIDI Settings MIDI

Keyboard Channel Keybd Ch E-60

Navigate Channels Navi. Ch E-60

Local Control Local E-61

Accomp Out AcompOut E-61

12 Delete DELETE

Sampled Sound Delete (tone name) E-25

User Rhythm Delete (rhythm name) E-47

User Song Delete (song name) E-57

All Data Delete All Data E-58

E-8

Getting Ready to Play

Either an AC adaptor or batteries can be used to power this

Digital Keyboard. Normally, use of AC adaptor power is

recommended.

• The AC adaptor does not come with this Digital Keyboard.

Purchase it separately from your retailer. See page E-3 for

information about options.

Use the AC adaptor when you want to power the Digital

Keyboard from a household electrical outlet.

Specified AC Adaptor: AD-5

• Be sure to turn off Digital Keyboard power before

connecting or disconnecting the AC adaptor.

• Be sure to turn off power before loading batteries.

• It is up to you to prepare six commercially available

D-size batteries. Do not use oxyride batteries or any

other nickel based batteries.

Open the battery cover on the bottom of the

Digital Keyboard.

Load six D-size batteries into the battery

compartment.

Make sure the positive + and negative - ends of the

batteries are facing as shown in the illustration.

Insert the tabs of the battery cover into the

holes on the side of the battery compartment,

and close the cover.

■ Low Battery Indication

The indicator shown below starts to flash to let you know

when battery power is low. Replace the batteries with new

ones.

Preparing the Music Stand

Power Supply

Using the AC Adaptor

Music stand

Household power outlet

AC adaptor

DC 9V terminal

Using Batteries

Tabs

Low battery indicator

(flashes)

English

E-9

Playing the Digital Keyboard

Press

This turns on power.

Try playing something on the keyboard. Use

to adjust volume.

• Turning off the Digital Keyboard causes most current

settings to be cleared. The Digital Keyboard will revert

to initial settings the next time you turn it on.

• This is true for all settings except for sample sound

protection. Once you turn it on it remains on until you

turn it off again.

While you are using batteries for power, power will turn off

automatically if you do not perform any operation for about six

minutes. Auto Power Off is disabled while the AC adaptor is

being used for power.

■ Disabling Auto Power Off

You can disable Auto Power Off to ensure that power is not

turned off automatically during a concert, etc.

While holding down

, turn on power.

Auto Power Off will be disabled.

Using headphones cuts off output from the built-in speakers,

which means you can practice playing even late at night

without disturbing others.

• Be sure to turn down the volume level before connecting

headphones.

• Headphones do not come with the Digital Keyboard.

• Use commercially available headphones. See page E-3 for

information about options.

• Do not listen to very high volume output over

headphones for long period. Doing so creates the risk

of hearing damage.

• If you are using headphones that require an adaptor

plug, make sure you do not leave the adaptor plugged

in when removing the headphones.

1122 77

bobo

bsbs

bpbp

ctctcscsbtbtckckclcl cmcm cncn coco

bqbq

Turning on Power and Playing

Auto Power Off (Using Batteries)

IncreaseDecrease

Using Headphones

PHONES/OUTPUT jack

Playing the Digital Keyboard

E-10

Touch Response alters tone volume in accordance with

keyboard pressure (speed). This provides you some of the

same expressivity you get on an acoustic piano.

■ Sound intensity depends on the speed that keys

are pressed.

People normally believe that the stronger the pressure applied

to a piano keyboard, the louder the sound. Actually, however,

the intensity of the notes played depends on the speed at

which keys are pressed. Notes are louder when keys are

pressed quickly, and quieter when keys are pressed slowly.

Keeping this in mind as you play a keyboard musical

instrument lets you control note volume without striving to

apply too much pressure with your fingertips.

■ The playability of an acoustic piano

Your Digital Keyboard provides you with key touch that is the

next best thing to an acoustic piano. Note volume changes

automatically in accordance with key press speed.

Use the procedure below to control how much the volume of

played notes change in accordance with playing speed.

Select the setting that best matches your playing style.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “Touch” (page

E-6).

Use

(10-key) [–] and [+] keys to select one of

the three Touch Response sensitivity settings.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “OTHER” (page

E-6).

Press

(10-key) [7] (ENTER) key.

Use the

(10-key) [4] (o) and [6] (p) keys

to display “Contrast”.

Use the

(10-key) [–] and [+] keys to adjust the

contrast.

• The contrast setting range is 01 to 17.

Changing Keyboard Response to

Touch Pressure

(Touch Response)

Keyboard Instrument Sound Intensity

Pressing fast produces

louder notes.

Pressing slowly produces

softer notes.

Do not try to use too much

pressure.

Changing Touch Response Sensitivity

Off (oFF) Touch Response is turned off. Sound

volume is fixed, regardless of key press

speed.

Type 1 (1) Normal Touch Response

Type 2 (2) More sensitive Touch Response than Type 1

Adjusting Display Contrast

Touch

Indicator disappears when

Touch Response is turned off.

OTHER

Flashes

C o n t r a s t

English

Playing the Digital Keyboard

E-11

You can use the voice pads to sound various sound effects or

even sounds you have sampled (page E-19). Use the voice

pads to add something extra to your performances.

Press

and

at the same time to enable the

voice pads.

•Pressing

and

at the same time again will disable

the voice pads.

• Be sure to make sure the voice pad function is enabled

before performing the next step. While voice pads are

disabled, buttons

through

function as

registration memory buttons (page E-48). Performing

the following step with voice pads disabled will change

the setup of the keyboard (tone number, rhythm

number, etc.).

Press a voice pad (1 through 5,

through

)

to sound what is assigned to it.

There are four sets of voice pad sounds numbered

1 through 4 (see below). Each press of

cycles through

sound sets 1 through 4.

Example: When Set 2 is selected

• While a sound set number is displayed, you can change it

using

(10-key). If you do not perform any operation for a

few seconds after the indicator appears, the display will

return to the previous screen automatically.

Using the Voice Pads

Lit when on

Pad 1Pad 2Pad 3Pad 4Pad 5

Set 1

VOICE 1

(Tone 571)

VOICE 2

(Tone 572)

VOICE 3

(Tone 573)

VOICE 4

(Tone 574)

VOICE 5

(Tone 575)

Set 2 Set 1 at various pitches

Set 3 Same as Set 1 Set 1 sound, repeated

Set 4 APPLAUSE GUNSHOT BONGO CONGA

TAMBOURINE

*1: If you performed melody sampling (page E-20) and

assigned the results to these tone numbers, the pad will

output the sampled sound.

*2: Pad 1: Perfect fifth up; Pad 2: Perfect fifth down;

Pad 3: Same as Set 1; Pad 4: Starting from a major third

down, gradually raises the pitch; Pad 5: Starting from one

octave up, gradually lowers the pitch

*3: Pad 3 gradually raises the pitch

bt ck cl cm cn co

Pad Se t

Playing the Digital Keyboard

E-12

After performing melody sampling to tone number 571

through 575, the corresponding tones are replaced with the

samples in Sets 1, 2, and 3 of the voice pads described in the

previous section. For more information about melody

sampling, see page E-20.

• Deleting sampled data will return the Voice Pads to their

default sounds. For more information about deleting

sampled data, see page E-25.

You can use the following procedure to adjust the volume

levels of the voice pad sounds to match them to other sounds

(keyboard, etc.).

Enable the voice pads.

• See steps 1 and 2 of the procedure on page E-11.

While holding down

, hold down the voice

pad (

through

) whose volume you want to

adjust.

• Keep

and the voice pad depressed as you perform

the next step.

Example: To select

(Pad 2).

While still holding down the two buttons, keep

pressing and releasing any keyboard key.

• Each press of the keyboard key will sound the tone

assigned to the voice pad. As you listen to the tone,

adjust its volume by altering the speed at which you are

pressing the keyboard key. Pressing at a faster rate will

raise the volume, while a slower rate will lower the

volume.

After the tone is at the volume you want, release

the two buttons you depressed in step 2.

• You can batch adjust the volume level of more than one

voice pad by holding down more than one voice pad along

with

in step 2 above.

The metronome lets you play and practice along with a steady

beat to help keep you on tempo.

Press

This starts the metronome.

Press

again to stop the metronome.

You can configure the metronome to use a bell sound for the

first beat of each measure of the song you are playing.

• You can specify 0, or a value from 2 to 6 as the number of

beat per measure.

• When playing a built-in song, the beats per measure setting

(which determines when the bell sounds) is configured

automatically for the currently selected song.

Hold down

until the beats per measure

setting screen appears on the display.

• If you do not perform any operation for a few seconds

after the beats per measure setting screen appears, the

display will return to the screen displayed before you

pressed

Use

(10-key) to enter the number of beats

per measure.

• The bell will not sound if you specify 0 for this setting. In

this case, all beats are indicated by a click sound. This

setting lets you practice with a steady beat, without

worrying how many beats there are in each measure.

Sounding Sampled Sounds with the Voice

Pads

Adjusting the Volume Levels of Voice Pads

bt cl

Using the Metronome

Start/Stop

Changing the Beats Per Measure

This pattern changes with each beat.

Bea t

English

Playing the Digital Keyboard

E-13

Use the following procedure to change the tempo of the

metronome.

Press

Use y (slower) and t (faster) to change the tempo

setting. Holding down either button changes the setting at

high speed.

•Pressing t and y at the same time will initialize the

tempo setting in accordance with the currently selected

song or rhythm.

•Pressing

causes the tempo value to flash on the

display. While the tempo value is flashing, you can use

(10-key) to change it.

Note that you must input leading zeros, so 89 is input

as 089.

• The tempo value will stop flashing if you do not perform

any operation for a short while.

The metronome volume setting is changed automatically with

the volume level of the currently selected Auto

Accompaniment or song. The metronome volume cannot be

adjusted independently.

• For information about changing the Auto Accompaniment

volume, see page E-42.

• For information about changing the song volume, see page

E-30.

• You cannot adjust the balance between the metronome

and note volume during Auto Accompaniment and built-in

tune play.

Changing the Metronome Tempo

Changing the Metronome Sound Volume

Tempo value (flashes)

E-14

Controlling the Keyboard Sounds

Your Digital Keyboard lets you select tones for a wide variety

of musical instrument sounds, including violin, flute, orchestra,

and more. Even the same song sound takes on a different feel

by changing the instrument type.

Press

Use

(10-key) to select the tone number you

want.

The corresponding tone number and tone name will

appear on the screen.

• See the separate “Appendix” for a complete list of available

tones.

• Use the number buttons to enter the tone number. Specify

three digits for the tone number.

Example: To select 001, enter 0 3 0 3 1.

• When one of the drum sets is selected, each keyboard key

is assigned a different percussion sound.

Try playing something on the keyboard.

The tone of the instrument you selected will sound.

Press

and

at the same time.

This selects the grand piano tone.

Settings

bsbs

bpbp

cpcp cqcq ctct

bqbq

Select from a variety of musical

instrument sounds

To select an instrument for playing

St .GrPno

Tone nameTone number

Playing with a Piano Tone (Piano Setup)

Tone Number : “001”

Reverb : “06”

Transpose : 00

Touch Response : Off: Returns to initial default

On: No change

Pedal Effect : SUS

Rhythm Number : “161”

Accompaniment : Rhythm part only

Local Control : On

Drum Assign : Off

Split : Off

Layer : Off

Chorus : Off

Octave Shift (Upper): 0

Auto Harmonize : Off

Arppegiator : Off

Scale : Equal

English

Controlling the Keyboard Sounds

E-15

You can use the following procedure to layer two different

tones (such as piano and strings) so they sound

simultaneously when you press a keyboard key.

Select the first tone you want to use.

Press

and then use

(10-key) to select the tone you

want.

Example: 021 ELEC.PIANO 1

Press

Use

(10-key) to select the second tone you

want.

Example: 175 STRINGS

Play something on the keyboard.

Both tones sound at the same time.

Pressing

again to unlayer the keyboard (so it

plays only the tone you selected in step 1).

• Each press of

toggles between layered (two tones)

and unlayered (one tone).

You can use the procedure below to assign different tones to

the right range and left range of the keyboard, so it sounds

like you are playing an ensemble between two instruments.

Select the tone for the right side range (page

E-14).

Press

and then use

(10-key) to select the tone you

want.

Example: 273 FLUTE 1

Press

Use

(10-key) to select the left side range tone

you want.

Example: 046 VIBRAPHONE 1

Play something on the keyboard.

This will sound the tones assigned to the left and right

side ranges of the keyboard.

Layering Two Tones

E . P i a n o 1

Lights

St r in

Disappears

Splitting the Keyboard between

Two Different Tones

To select the two tones for a split keyboard

Flute 1

Lights

V i b e s 1

Split point

VIBRAPHONE 1

FLUTE 1

Controlling the Keyboard Sounds

E-16

Pressing

again to unsplit the keyboard (so it

plays only the tone you selected in step 1).

• Each press of

toggles between split (two tones) and

unsplit (one tone).

• If you turn on both layer and split, layering will be applied to

the right side range of the keyboard only.

While holding down

, press the keyboard key

where you want the split point to be.

The key you press will become the lowest note of the right

side range of the split keyboard.

Example: Setting middle C (C4) as the split point.

Reverb adds reverberation to notes. You can change the

duration of the reverb.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “Reverb” (page

E-6).

Use the

(10-key) [–] and [+] keys to select the

reverb setting you want.

Chorus is a function that adds depth and breadth to notes. It

makes you sound as if you are playing multiple instruments.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “Chorus” (page

E-6).

Use the

(10-key) [–] and [+] keys to select the

chorus type you want.

There are five chorus types, plus an off setting.

• The actual effect produced by chorus depends on the tone

you are using.

To change the split point

Disappears

Key name

Using Reverb

Off (oFF) Turns off reverb.

1 to 10 The larger the number selected, the longer

the reverb duration.

Using Chorus

Reverb

Indicator disappears when reverb is turned off.

Cho r us

Indicator disappears when chorus is turned off.

English

Controlling the Keyboard Sounds

E-17

A pedal can be used to change notes in various ways while

playing.

• A pedal unit does not come with the Digital Keyboard.

Purchase one separately from your retailer. See page E-3

for information about options.

Connect an optional pedal unit.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “OTHER” (page

E-6).

Press

(10-key) [7] (ENTER) key.

Use the

(10-key) [4] (o) and [6] (p) keys

to display “Jack”.

Use the

(10-key) [–] and [+] keys to select the

pedal effect you want.

• The following shows the available pedal effects.

The transpose feature lets you change the pitch, in semitone

steps. A simple operation lets you instantly change the pitch

to match that of a singer.

• The transpose setting range is –12 to +12 semitones.

Press

Use the

(10-key) [–] and [+] keys to select the

transpose setting you want.

Use the tuning feature when you need to adjust the pitch

slightly to play along with another musical instrument. Also,

some artists perform their music with slightly altered tuning.

You can use the tuning feature to adjust tuning so it exactly

matches a performance on a CD.

• The tuning setting range is –99 to +99 cents.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “Tune” (page E-6).

Use the

(10-key) [–] and [+] keys to adjust the

tuning.

Using a Pedal

Connecting a Pedal Unit

Selecting the Pedal Effect

Sustain

(SUS)

Sustains notes played while the pedal is

depressed. Organ and other similar tone

notes are sustained even if the pedal is not

pressed.

Sostenuto

(SoS)

Sustains notes that are playing when the

pedal is depressed before the keyboard keys

are released.

Soft

(SFt)

Slightly softens notes played while the pedal

is depressed.

Rhythm

(rHy)

Pressing the pedal starts and stops Auto

Accompaniment or song playback.

SUSTAIN/ASSIGNABLE JACK

OTHER

Flashes

Jack

Changing the Pitch

(Transpose, Tuning, Octave Shift)

Changing the Pitch in Semitone Steps

(Transpose)

Fine Tuning (Tuning)

Trans.

Tune

Controlling the Keyboard Sounds

E-18

Octave Shift lets you raise or lower the pitch of the keyboard

notes in octave units.

• The octave shift setting range is –2 to +2 octaves.

• When using Split (page E-15), you can individually set the

left and right keyboard ranges to the pitches you want.

Keep pressing

until the screen shown below

appears on the display.

If you want to use Split, turn on Split before pressing

• If you do not perform any operation for a few seconds

after this screen appears, the display will return to the

previous screen automatically.

Use the

(10-key) [–] and [+] keys to shift the

octave.

Press

again.

Octave Shift

• Split On : This step affects the right side keyboard

range only.

• Split Off : This step affects the entire keyboard range.

• Split On : The screen shown below will appear. Use the

(10-key) [–] and [+] keys to shift the

octave for the left side keyboard range.

• Split Off : The screen shown below will appear.

Advance to step 4.

Oc t U

Oc t Lowe r

English

E-19

Sampling Sounds and Playing Them on the Digital

Keyboard

You can sample sounds from a microphone, from a portable

audio player, or other device, and then play the sound on the

keyboard or voice pads. For example, you could sample the

bark of your dog and then use the sound in a melody. You

also can sample and use passages from a CD. The sampling

feature is a great way to create new sounds that are highly

creative.

• Before connecting, make sure that the Digital

Keyboard, external devices, and/or the microphone all

are turned off.

Connect a microphone or external device to the

Digital Keyboard.

• You also could connect a commercially available

microphone.

• Connection of an external device requires commercially

available connecting cords, supplied by you. Connecting

cords should have a stereo mini plug on one end and a plug

that matches the configuration of the external device on the

other end.

Turn down the volume levels of the external

device and the Digital Keyboard.

Turn on the external device or microphone, and

then turn on the Digital Keyboard.

• When using a microphone, adjust the input volume

level with

• It will take a few seconds after you turn on the Digital

Keyboard before you will be able to use the microphone.

• Sampled sounds are recorded in monaural.

bsbs

bpbp

btbt ckck clcl cmcm cncn coco ctctcscs

bqbq33

Connection and Preparation

MIC IN jack

Digital Keyboard AUDIO IN jack

Stereo mini plug

CD player, Cassette player,

etc.

Sampling Sounds and Playing Them on the Digital Keyboard

E-20

Use the procedures in this section to sample a sound and play

it as the melody part on the Digital Keyboard.

• Up to five sampled sounds can be stored in Digital

Keyboard memory as tone numbers 571 through 575.

Simply select the tone number where the sound you want is

located to assign the sound to the keyboard.

Press

and then use

(10-key) to enter the

tone number 571 to 575 where you want to store

the sampled sound.

• In place of the above steps, you could press

and

the same time and then select a tone number.

Press

This enters sampling standby.

The allowable sampling time (in seconds) will appear on

the display momentarily and then the display will change

to the following.

Output the sound from the external device. In

the case of a microphone, output the sound in

the direction of the microphone.

Sampling will start automatically.

After the sound you want to sample is finished,

press

Sampling will stop when you release

• Even if you do not press

, sampling will stop

automatically whenever there is no more sound being

input from the external device or microphone. Sampling

also will stop automatically 10 seconds after it is

started.

Play something on the Digital Keyboard.

• You can press voice pad 1 through 5 (

through

) to

sound the sampled sound. For more information about

the relationship between tone numbers and voice pads,

see page E-11.

• You may not be able to get 10 seconds of sampling if

Digital Keyboard memory is low due to storage of other

data. If this happens, deleting other memory data you no

longer need will free up memory space and you should be

able to sample for 10 seconds. See “Deleting a Sampled

Sound” on page E-25 for more information.

• Sampling sound and storing it will delete any sound

data currently stored under the same tone number. To

help ensure that you do not accidentally delete

important data, be sure to read “Protecting Against

Accidental Deletion of Sampled Sounds” on page E-26.

Sampling and Playing a Melody

Sound (Melody Sampling)

To sample a sound

N o D a t a

No sampled sound stored

Lights

a i t i n

Flashes

S a m

li n

Flashes

S 1 : O r

n l

Sampled sound 1

Used memory

(Unit: Kbytes)

Remaining memory

capacity

English

Sampling Sounds and Playing Them on the Digital Keyboard

E-21

■ How sampled sounds are played

Pressing Middle C (C4) will play back the original sound. The

keys to the left and right of C4 play the sound at different

pitches.

You can use the following procedure to loop a sampled sound

so it continues to repeat, as you play on the Digital Keyboard.

Press

While holding down

, press

This enters repeat standby.

Press the button (

) that corresponds to

the melody sampling tone number you want to

select.

This will start looped playback of the selected sound.

Press the same button again to stop playback.

Press

to return to the screen that was

displayed before step 2 of this procedure.

You can use the following procedure to change the volume

level of the looped playback of each sampled sound, if you

want.

Press the button of the sampled sound whose

volume you want to change (

• This will cause the sound’s loop to sound.

While the loop is sounding hold down the same

sampled sound button (

) as you press

any keyboard key.

• Pressing the keyboard key quickly will increase sample

sound volume, while pressing slowly will decrease

volume.

After the sampled sound is at the volume level

you want, release its button (

Looping a Sampled Sound

To select this tone number: Press this button:

571

572

573

574

575

F u n k 8 B t

Lights

Changing the Volume of Sampled Sound

Looped Playback

Sampling Sounds and Playing Them on the Digital Keyboard

E-22

You can apply various effects to sampled sounds.

Press

and then use

(10-key) to enter the

tone number 571 to 575 to which you want to

apply effects.

Press

to cycle thorough the available

effects, described below.

• Avoid assigning the same sampled sound to the keyboard

for play along and for looped play. Doing so will cause, the

Loop 1 effect to be applied to the keyboard tone while

looped play of the sampled sound is being performed.

You can use the procedure to change the drum sounds that

are assigned to each keyboard key.

• You can store up to three drum sets and store them as tone

numbers 576, 577, and 578. Simply select the tone number

where the drum set you want is located to assign the drum

set sounds to the keyboard.

Press

lights.

Press

and then use

(10-key) to enter the

tone number 576, 577, or 578 for the drum set

whose sounds you want to change.

• In place of the above steps, you could press

and

at the same times and then select a tone number.

Press

Press the keyboard key to which you want to

assign the drum sound you are about to

sample.

This enters sampling standby.

The allowable sampling time (in seconds) will appear on

the display momentarily and then the display will change

to the following.

Output the sound from the external device. In

the case of a microphone, output the sound in

the direction of the microphone.

Sampling will start automatically.

Applying Effects to a Sampled Sound

Effect Type

(Display)

Description

Original (Orgnl)

Normal sampled tone (no looping, no

effect).

Loop 1 (Loop1) Loops the sampled sound.

Loop 2 (Loop2)

Loops the sample sound and raises the

pitch of the resonating sound when the

keyboard key is released.

Loop 3 (Loop3)

Loops the sample sound and lowers the

pitch of the resonating sound when the

keyboard key is released.

Pitch 1 (Ptch1)

Changes the pitch from low to high, at an

increasing rate.

Pitch 2 (Ptch2)

Changes the pitch from high to low, at a

decreasing rate.

Pitch 3 (Ptch3)

Changes the pitch from high to low, at a

decreasing rate, and then raises the pitch

when the key is released.

Tremolo (Treml) Alternates volume between high and low.

Funny 1 (Funy1)

Adds vibrato and changes the pitch by a

gradually increasing amount.

Funny 2 (Funy2)

Alternates between high pitch and low

pitch.

Funny 3 (Funy3)

Adds vibrato and changes the pitch from

low to high.

Incorporating a Sampled Sound

into a Drum Set (Drum Sampling)

N o D a t a

Lights

N o D a t a

Flashes

a i t i n

Flashes

S a m

li n

Flashes

English

Sampling Sounds and Playing Them on the Digital Keyboard

E-23

After the sound you want to sample is finished,

press

Sampling will stop when you release

• Even if you do not press

, sampling will stop

automatically whenever there is no more sound being

input from the external device or microphone. Sampling

also will stop automatically 10 seconds after it is

started.

Press the keyboard key.

• You can repeat steps 3 through 6 to change other sounds

that make up the currently selected drum set. There are

eight sounds per drum set.

• You may not be able to get 10 seconds of sampling if

Digital Keyboard memory is low due to storage of other

data. If this happens, deleting other memory data you no

longer need will free up memory space and you should be

able to sample for 10 seconds. See “Deleting a Sampled

Sound” on page E-25 for more information.

• Sampling a sound will delete any sound data currently

assigned to the same keyboard key. To help ensure

that you do not accidentally delete important data, be

sure to read “Protecting Against Accidental Deletion of

Sampled Sounds” on page E-26.

You can use the procedures in this section to copy the drum

sound assigned to one keyboard key to another key, to

change the pitch of a sound, and to delete a sampled sound.

Press

and then use

(10-key) to enter the

tone number 576, 577, or 578 for the drum set

you want.

Press

This is the editing mode.

• While in the editing mode, you can copy a sound,

change the pitch of a sound, or delete a sound (each of

which is described below). Pressing

again exits the

editing mode and returns to step 2 of this procedure.

■ To copy a sampled sound from one key to

another

While holding down the keyboard key to which the sampled

sound you want to copy is assigned, press the keyboard key

to which you want to copy it.

Example: To copy sampled sound of key C4 to key D4

• A keyboard key that already has a sampled sound assigned

cannot be selected as a copy destination.

S m

l D r m 1

Remaining memory

capacity

Used memory

(Unit: Kbytes)

Editing Sampled Drum Set Sounds

S m

l D r m 1

Flashes at high speed

Indicates keyboard keys that have sounds assigned.

Indicates the keyboard key whose sound was copied.

Sampling Sounds and Playing Them on the Digital Keyboard

E-24

■ To change the pitch of a sampled sound

While holding down the keyboard key of the sampled sound

whose pitch you want to change, use the

(10-key) [–] and

[+] keys to change the pitch.

• You can change the pitch within a range of –64 to 63

semitones.

■ To delete a keyboard key’s sampled sound

While holding down the keyboard key whose sound you want

to delete, press

. In response to the “DelSure?” message

that appears, press the

(10-key) [+] button to delete, or [–]

to cancel the delete operation.

• Deleting a sampled sound will return the key to its initial

default built-in sound.

Example: To delete the sound assigned to key D4

Use the following procedure to change the rhythm part of an

Auto Accompaniment pattern to a drum set sound that you

sampled.

Press

and then use

(10-key) to enter the

rhythm number of the Auto Accompaniment

pattern you want.

You cannot use a Drum Sampling Tone in a user rhythm,

so do not select a user rhythm in the above step.

Press

and then use

(10-key) to enter the

tone number of the sampling drum set that

contains the sound you want to use.

Press

This changes the rhythm part of the Auto Accompaniment

pattern you selected in step 1 to the sampled sound you

selected in step 2.

• To change the Auto Accompaniment rhythm part back

to its original sound, press

again.

• Some rhythm part drum sounds cannot be replaced by

sampled sounds.

Normally when the Digital Keyboard is in sampling standby, it

will start sampling automatically whenever it detects sound

input. You can use the following procedure to enable manual

sampling start, which will cause sampling to wait until you

press a button to start it. You can use this to insert silence

before the sampled sound.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “SAMPLING” (page

E-6).

Press the

(10-key) [7] (ENTER) key.

Press the

(10-key) [–] key to turn off

automatic sampling start.

This enables manual sampling start, which operates as

described below.

• Melody sampling (page E-20):

Sampling starts when you release

, which you press

in step 2 of the sampling procedure.

• Drum sampling (page E-22):

Sampling starts when you release the Digital Keyboard

key you press in step 4 of the sampling procedure.

• When manual sampling start is enabled, sampling

starts when you release

or the keyboard key, not

when you press it. Sampling does not start if you hold

down the button or key.

Using a Drum Sampling Tone in Auto

Accompaniment (Drum Assign)

Disappears

Other Sampling Functions

Changing to a Manual Sampling Start

S A M P L I N G

Flashes

A u t o S t r t

English

Sampling Sounds and Playing Them on the Digital Keyboard

E-25

Normally the Digital Keyboard will stop sampling automatically

whenever it detects there is no sound input. You can use the

following procedure to enable manual sampling stop, which

will cause sampling to continue until you press a button to

stop it. You can use this to insert silence after the sampled

sound.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “SAMPLING” (page

E-6).

Press the

(10-key) [7] (ENTER) key.

Press the

(10-key) [6] (p) key.

Press the

(10-key) [–] key to turn off

automatic sampling stop.

Even when there is no sound input from an external

device, sampling will continue until you press and release

or a keyboard key.

• When manual sampling stop is enabled, sampling

stops when you release

or the keyboard key, not

when you press it. Sampling does not stop if you hold

down the button or key.

You can use the following procedure to specify a sampled

tone number and delete its data.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “DELETE” (page

E-6).

Press the

(10-key) [7] (ENTER) key.

Use the

(10-key) [–] and [+] keys to select the

tone number of the data you want to delete.

Press the

(10-key) [7] (ENTER) key.

This displays a delete confirmation message.

Press the

(10-key) [+] (YES) key to delete the

data, or [–] (NO) or [9] (EXIT) to cancel the

delete operation.

• After the delete procedure is complete, “Complete” will

appear on the display followed by the screen in step 2

of the above procedure.

• For information about deleting individual drum sounds

in a drum sampling set, see “Editing Sampled Drum Set

Sounds” on page E-23.

Changing to Manual Sampling Stop

A u t o S t o

Deleting a Sampled Sound

D E L E T E

Flashes

S 1 : O r

n l

Used memory

(Unit: Kbytes)

Remaining memory

capacity

S u r e ?

Sampling Sounds and Playing Them on the Digital Keyboard

E-26

You can use the following procedure to protect each sampled

sound against accidental deletion.

Press

and then use

(10-key) to enter the

tone number of the sampled tone you want to

protect.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “SAMPLING” (page

E-6).

Press the

(10-key) [7] (ENTER) key.

Use the

(10-key) [4] (o) and [6] (p) keys

to display “Protect”.

Press the

(10-key) [+] key to turn on

protection.

Once protected a tone cannot be deleted.

A protected tone is indicated as shown below.

■ Saving Sample Data on an External Device

See page E-62 for details about how to transfer sampled data

to a computer for storage.

■ Maintaining Sampled Sound Data in Memory

After you save sampled sound data in memory, it will remain

there as long as power is supplied to the keyboard. However,

if you disconnect the AC adaptor when there are no batteries

loaded, sampled sound data will be deleted.

Tips for Maintaining Data

• Use both batteries and the AC adaptor together.

• Make sure that batteries with sufficient power are loaded

whenever you disconnect the AC adaptor.

• Connect the AC adaptor to the keyboard and plug it into a

power outlet before replacing batteries.

Before connecting or disconnecting the AC adaptor or

replacing batteries, first press

to turn off power.

Protecting Against Accidental Deletion of

Sampled Sounds

P r o t e c t

1 : O r

n l

Protected

English

E-27

Playing Built-in Songs

With this Digital Keyboard, built-in tune data is referred to as

“songs”. You can listen to the built-in songs for your own

enjoyment, or you can play along with them for practice.

• In addition to simple listening enjoyment, the built-in songs

can be used with the lesson system (page E-31) for

practice.

• You can increase the number of tunes using your computer

(page E-59).

Use the following procedure to play back built-in songs.

Press

and

at the same time.

This will start playback of the demo songs.

• See page E-69 for information about song numbers and

the song sequence.

• Demo playback always starts from song number 151.

To change to another song while demo

playback is in progress, use

(10-key) [–] and

[+] keys to enter the song number you want

(page E-6).

This will cause demo playback to jump to the song whose

number you entered.

• You cannot use

(10-key) number buttons to select a

song.

To stop demo playback, press

Demo playback continues until you stop it by pressing

bobo

bsbs

88 99 bkbk blbl bmbm ctctbnbn

brbr

Playing the Demo Songs

D e m o T u n e

Song number Tune name

Flashes

Playing Built-in Songs

E-28

Use the procedure below to play back one of the built-in

songs. You can play along on the keyboard with song

playback.

Press

Use

(10-key) to enter the number of the song

you want.

• See page E-69 for a complete list of available songs.

Press

This starts playback of the song.

Press

again to stop playback.

Song playback will continue (repeat) until you press

stop it. You can cancel song repeat by pressing

(“REPEAT” indicator disappears from the display).

Use the operations in this section to perform pause, skip

forward, and skip back operations.

■ Pause

Press

This pauses song playback.

Press

again to resume playback from the

point where you paused it.

■ Skip Forward

Press

This skips song playback forward to the next measure.

Each press of

skips ahead one measure. Holding

down

skips forward at high speed until you release it.

• Pressing

while song playback is stopped performs

lesson function phrase skip forward (page E-32).

■ Skip Back

Press

This skips song playback back to the previous measure.

Each press of

skips back one measure. Holding down

skips back at high speed until you release it.

• Pressing

while song playback is stopped performs

lesson function phrase skip back (page E-32).

Playing Back a Particular Song

Start/Stop

T w i n k l e

Tune nameSong number

Key

Note

Tempo

Beat

Measure

Fingering

Sustain pedal

Pause, Skip Forward, Skip Back

Measure number

English

Playing Built-in Songs

E-29

You can use the procedure in this section to repeat particular

measures for practice playing along until you master it. You

can specify the start measure and the end measure of the

section you want to play and practice.

Press

to temporarily turn off song repeat

(“REPEAT” disappears from the display).

When song playback reaches the measure you

want to specify as the start measure, press

This specifies the measure as the start measure.

When playback reaches the measure you want

to select as the end measure, press

again.

This specifies the measure as the end measure and starts

repeat playback of the measures in the specified range.

• During repeat play you can use

to pause playback,

to skip forward, or

to skip back.

Pressing

again returns to normal playback.

Changing the song number clears the start measure and

end measure of the repeat operation.

You can use the following procedure to change the speed

(tempo) in order to slow down playback to practice difficult

passages, etc.

Press

Use y (slower) and t (faster) to change the tempo

setting. Holding down either button changes the setting at

high speed.

• Pressing y and t at the same time will return the

current song to its original default tempo.

• Pressing

causes the tempo value to flash on the

display. While the tempo value is flashing, you can use

(10-key) to change it. The tempo value will stop

flashing if you do not perform any operation for a short

while.

• Changing the song number will return the song to its

original default tempo.

Repeating Playback of Specific Measures

Start End

These measures are repeated.

Flashes

Lights

Changing Playback Speed (Tempo)

Disappears

Playing Built-in Songs

E-30

Use the following procedure to adjust the balance between

the volume of what you play on the keyboard and song

playback volume.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “Song Vol” (page

E-6).

Use the

(10-key) [–] and [+] keys to adjust the

song volume.

The procedure below lets you select the same keyboard tone

as the one being used in the song and play along with your

favorite tunes.

After selecting a song, hold down

for about

two seconds until the displayed tone name

changes to the tone name of the song.

• If your currently selected tone is the same as the song

tone, the display contents will not change.

Play along with song playback.

• If you select a song that uses different tones for left and

right hand play, the right hand part tone is assigned to the

keyboard.

You can turn off the right hand part or the left hand part of a

song during playback and practice playing along with the

remaining part.

Press

to select the part you want to turn off.

Each press of

cycles through the settings shown

below.

Press

This starts playback in accordance with the setting you

selected in step 1.

• During playback with one part turned off, only the notes of

the part that is turned off are shown on the display.

You can transfer song data from your computer to the Digital

Keyboard and assign them to song numbers 153 through 162,

which are called “user songs”. After that, you can select user

songs for playback and for lessons (page E-31). For

information about transferring song data from your computer

to Digital Keyboard memory, see page E-62.

• For information about how to delete song data loaded from

a computer, see page E-57.

Adjusting the Song Volume

Playing with the Tone as Song Playback

Son

Vo l

Turning Off the Part of One Hand for Practice

(Part Select)

Increasing the Selection of Songs

(User Songs)

Right hand part off

Left hand part off

Both hand parts off

Both hand parts on

English

E-31

Using Built-in Songs to Master Keyboard Play

To master a song, it is best to break it up into shorter parts

(phrases), master the phrases, and then put everything

together. Your Digital Keyboard comes with a Step Up Lesson

feature that helps you to do just that.

The built-in songs are pre-divided into phrases to help you

master keyboard play.

Step Up Lesson takes you through practice of the right hand

part, left hand part, and both hand parts for each phrase of a

song. Master all of the phrases and you master the song.

bsbs

88 99 bkbk bmbm btbt ckck clcl cmcm cncn ctctbnbn

brbr

Phrases

Song start Song end

Phrase 1 Phrase 2 Phrase 3 . . . .

Final

Phrase

Step Up Lesson Flow

Phrase 1

• Right Hand Lesson 1, 2, 3

• Left Hand Lesson 1, 2, 3

• Both Hand Lesson 1, 2, 3

Repeat the above to practice phrase

2, 3, 4, and so on, until you reach the

final phrase of the song.

After mastering all of the phrases,

practice the entire song.

Now you have mastered the entire

song!

Using Built-in Songs to Master Keyboard Play

E-32

The following are the messages that appear on the display

during Step Lessons.

First, select the song, phrase, and part you want to practice.

Select the song you want to practice (page

E-28).

This will select the first phrase of the song.

Press

(or

) to move forward one phrase, or

to move back one phrase.

• Holding down

scrolls through phrases at high

speed.

• The Digital Keyboard remembers the last phrase you

practiced for up to 20 songs. To recall the last practice

phrase for the current song (if it is available), hold down

Press

to select the part you want to practice.

Each press of

cycles through the settings shown

below.

Hold down

for about two seconds.

The same tone used for song playback will be assigned to

the keyboard (page E-30).

Messages that Appear during Lessons

Message Description

<Phrase> Appears when you select a phrase, when a

lesson starts, etc.

• Note that certain phrases will cause “Wait”

to appear instead of “Phrase”.

<Wait> Appears when the lesson starts with an intro

or fill-in phrase that is not included in the

phrases to be practiced. Play toll advance

automatically to the next phrase after the un-

included phrase plays, so wait until then to

start playing on the keyboard.

NextPhrs Appears when advancing automatically to the

next phrase. This message appears following

a phrase for which “Wait” (see above) is

displayed, and during an Auto Step Up Lesson

(page E-36).

From top This message appears during Auto Step Up

Lesson (page E-36) immediately before

practice from Phrase 1 up until the phrase

currently being practiced.

Complete Appears at the end of Auto Step Up Lesson

(page E-36).

Selecting the Song, Phrase, and

Part You Want to Practice

Phrase number

First measure of the selected phrase

* This indicator (setting) is skipped if you press

while

a lesson is in progress.

Right hand practice

Left hand practice

Both hand practice

English

Using Built-in Songs to Master Keyboard Play

E-33

Now it is time to start the lessons. First, select the song and

part you want to practice.

First, listen to the example a few times to familiarize yourself

with what it sounds like.

Press

This starts example play.

To stop Lesson 1, press

Play the song on the keyboard. During this lesson, the display

shows the key you need to press next. Voice fingering guide

also uses a simulate voice to announce which finger you

should use. Follow the instructions to press the correct

keyboard keys and play the notes. Don’t worry if you play the

wrong note. Song playback will wait until you play the correct

note. Take your time and play at your own pace.

Press

This starts Lesson 2.

Play notes on the keyboard in accordance with

the instructions provided on the display and by

voice fingering guide.

During this lesson, the display shows the key you need to

press next. Voice fingering guide uses a simulate voice to

announce which finger you should use.

To stop Lesson 2, press

● If you complete Lesson 2 play to the end, a score that

rates your play appears on the screen.

Lessons 1, 2, and 3

Lesson 1: Listen to the song.

Lesson 2: Watch how the song is played.

Lights

Master playing the correct note with the correct finger

as instructed by the guidance. Practice playing with the

correct timing.

Song playback will wait for you to play the correct note.

• Keyboard key goes from flashing to lit.

• Note guide sounds the correct note to be played.

• Voice Fingering Guide tells you what finger to use.

Pressing the correct keyboard key causes song

playback to resume and the key for the next note

flashes.

Bravo! You pass! Advance to the next lesson.

Again! Go back and try again.

Lights

Flashes

Using Built-in Songs to Master Keyboard Play

E-34

Though song playback stands by waiting for you to press the

correct keys as in Lesson 2, the Digital Keyboard does not

provide any guidance about what note you need to play next.

Remember everything you have learned up to Lesson 2 as

you play.

Press

This starts Lesson 3.

Play the song along with the song playback.

To stop Lesson 3, press

• If you complete Lesson 3 play to the end, a score that

rates your play appears on the screen the same as with

Lesson 2.

After you successfully complete all of the phrases in Lessons

1, 2, and 3, it is time to try playing the entire song from

beginning to end.

Use

to turn off both hand parts and then

press

Try playing with both hands and find out how the Digital

Keyboard evaluates your effort.

You can turn off phrase repeat for Lessons 1, 2, and 3.

Press

This disables phrase repeat play.

Use the following procedure to turn off voice fingering guide,

which tells you which finger to use to play each note in

Lesson 2 and Lesson 3.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “LESSON” (page

E-6).

Press

(10-key) [7] (ENTER) key.

Lesson 3: Remember what you learned as

you play.

Press the keyboard keys you learned in Lesson 2.

Song playback will wait for you to play the correct note.

• Note guide sounds the correct note to be played.

If you are still unable to press the correct keyboard

key, the Digital Keyboard will display keyboard

guidance and voice fingering guide will tell you what

finger to use, just as in Lesson 2.

Pressing the correct key will cause song playback to

resume.

Lights

Playing a Particular Song All the Way

Through

Lesson Settings

Playing without Phrase Repeat

Turning Off Voice Fingering Guide

Disappears

LESSON

Flashes

eak

English

Using Built-in Songs to Master Keyboard Play

E-35

Press the

(10-key) [–] key to select the OFF

setting.

Use the following procedure to turn off note guide, which

sounds the note to be played next in Lesson 2 and Lesson 3.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “LESSON” (page

E-6).

Press

(10-key) [7] (ENTER) key.

Use the

(10-key) [4] (o) and [6] (p) keys

to display “NoteGuid”.

Press the

(10-key) [–] key to select the OFF

setting.

Use the following procedure to turn off performance

evaluation, which evaluates your performance and displays a

score in Lesson 2 and Lesson 3.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “LESSON” (page

E-6).

Press

(10-key) [7] (ENTER) key.

Use the

(10-key) [4] (o) and [6] (p) keys

to display “Scoring”.

Press the

(10-key) [–] key to select the OFF

setting.

You can use the following procedure to change the length of

lesson phrases, or to configure the lesson feature so the song

is played all the way through, without being divided into

phrases.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “LESSON” (page

E-6).

Press

(10-key) [7] (ENTER) key.

Use the

(10-key) [4] (o) and [6] (p) keys

to display “PhraseLn”.

Use the

(10-key) [–] and [+] keys to select the

phrase length you want.

The following options are available for songs loaded from

external sources only.

Turning Off Note Guide

Turning Off Performance Evaluation

Indicator disappears

when voice fingering

guide is turned off.

NoteGuid

Sco r i n

Indicator disappears

when performance

evaluation is turned off.

Changing the Phrase Length

Off (oFF) The phrase length is from the beginning to

the end of the song.

Preset (PrE) Phrase lengths are as specified in the song.

Short (Ln1) Length of one phrase is one measure.

Middle (Ln2) Length of one phrase is two measures.

Long (Ln3) Length of one phrase is four measures.

PhraseLn

Using Built-in Songs to Master Keyboard Play

E-36

With Auto Step Up Lesson, the Digital Keyboard advances

through each lesson automatically.

Select the song and part you want to practice

(page E-28).

Press

Listen to the first phrase in Lesson 1.

• In Lesson 1, the sample phrase is played only once

before advancing to Lesson 2.

Auto Step Up Lesson stops automatically after

you are able to get through all of the lessons

successfully.

• In Lesson 2 and Lesson 3, the Digital Keyboard

advances to the next lesson if you are able to achieve

the “Bravo!” evaluation result.

• To cancel a lesson, press

• You can change the step and phrase during Auto Step Up

Lesson using

, and

• Starting Auto Step Up Lesson turns on Phrase Repeat

(page E-34), Note Guide (page E-35) and Performance

Evaluation (page E-35) automatically. These features

cannot be turned off during lessons.

■ Auto Step Up Lesson Procedure

* Auto Step Up Lesson advances to the next phrase,

regardless of whether the “Bravo!” result is attained.

Using Auto Step Up Lesson

Lights

Flashes

Phrase 1

Lesson 1

Lesson 2

Lesson 3

Phrase 2

Lesson 1

Lesson 2

Lesson 3

Phrase 1, 2

• Lesson 3*

Phrase 3

Lesson 1

Lesson 2

Lesson 3

Phrase 1, 2, 3

• Lesson 3*

Next phrase practice using the same

procedure

Final phrase

Lesson 1

Lesson 2

Lesson 3

From Phrase 1 to the final phrase

• Lesson 3*

Lesson complete

English

E-37

Music Challenge Keyboard Game

Music Challenge is a game that measures your reaction

speed as you press keys in response to on-screen keyboard

indicators and fingering guide indications.

Press

This causes a key on the on-screen keyboard to start to

flash, and starts the Music Challenge song.

After the on-screen keyboard indicator changes

from flashing to lit, press the indicated key with

the indicated finger as quickly as possible.

This causes the on-screen keyboard key to go out to let

you know that you cleared the first note. The next on-

screen keyboard key starts to flash, so get ready to press

the next key.

• The time it takes you to press the keyboard key after

the on-screen key lights appears on the display (Unit:

0.1 sec). The shorter the time, the higher your score.

• Pressing a keyboard key before the on-screen key

goes from flashing to lit, will not advance to the next

note.

The game ends when you advance successfully

through 20 notes.

• Your playing time appears on the display. After a short

while, the playing time display changes to a score. To

clear the score from the display, press

, or

• You can cancel a game at any time by pressing

• Notes and fingering guide fingers are indicated randomly.

• The tempo of the game songs cannot be changed.

• All buttons except

, and

are disabled while a game

is in progress.

11 bpbp

bmbm coco

brbrbqbq

M.CHAL . !

Displayed during a game.

Number of remaining notes

Fingering

M.CHAL . !

Time 0.3sec

Time19.2

S c o r e 8 0

Playing time

Score

E-38

Using Auto Accompaniment

With Auto Accompaniment, simply select an accompaniment

pattern. Each time you play a chord with your left hand the

appropriate accompaniment will play automatically. It’s like

having a personal backup group along with you wherever you

go.

• Auto Accompaniments are made up of the following three

parts.

(1) Rhythm

(2) Bass

(3) Harmony

You can have only the rhythm part play, or you can have all

three parts play at the same time.

The rhythm part is the foundation each Auto Accompaniment.

Your Digital Keyboard comes with a variety of built-in rhythms,

including 8-beat and waltz. Use the following procedure to

play the basic rhythm part.

Press

Use

(10-key) to select the rhythm number

you want.

• See the separate “Appendix” for information about

individual rhythms.

Press

This starts the rhythm.

Play along with the rhythm.

To stop the rhythm, press

again.

bobo

bsbs

88 99 bkbk blbl bmbm crcr ctctbnbn

bqbq

Playing the Rhythm Part Only

Starting and Stopping the Rhythm Part Only

Funk 8Bt

Rhythm number Rhythm pattern name

This pattern changes with each beat.

English

Using Auto Accompaniment

E-39

Playing a chord with your left hand automatically adds bass

and harmony accompaniment parts to the currently selected

rhythm. It is just like having your own personal back up group

on call.

Start play of the Auto Accompaniment rhythm

part.

Press

This enables chord input on the accompaniment

keyboard.

Use the accompaniment keyboard to play

chords.

This will cause bass and harmony Auto Accompaniment

parts to be added to the rhythm part.

Play other chords with left hand as you play the

melody with your right hand.

Pressing

again returns to rhythm only

accompaniment.

• For information about starting Auto Accompaniment as

soon as a chord is played, see “Using Synchro Start” on

page E-42.

• You can use the split point to change the size of the

accompaniment keyboard range (page E-16).

You can select from among the following five chord input

modes.

• FINGERED 1

• FINGERED 2

• FINGERED 3

• CASIO CHORD

• FULL RANGE CHORD

Hold down

until the chord input mode

selection screen appears on the display.

Use the

(10-key) [–] and [+] keys to select the

chord input mode you want.

• If you do not perform any operation after the chord input

mode selection screen appears, the display will return

automatically to the screen that was displayed before

you held down

Playing All Parts

Auto Accompaniment with Chords

Example: Pressing D-F

-A-C on the accompaniment keyboard

Accompaniment for the D-F

-A-C chord (D7) sounds.

Lights

Accompaniment keyboard

Chords

(no melody played) Melody

Selecting a Chord Input Mode

Cho r d

Chord input mode

Using Auto Accompaniment

E-40

■ FINGERED 1, 2, and 3

With these three input modes, you play chords on the

accompaniment keyboard using their normal chord fingerings.

Some chord forms are abbreviated, and can be fingered with

one or two keys.

See the separate “Appendix” for information about chords that

are supported and how they are fingered on the keyboard.

● FINGERED 1

Play the component notes of the chord on

the keyboard.

● FINGERED 2

Unlike FINGERED 1, 6th input is not

possible. m7 or m7

5 is input.

● FINGERED 3

Unlike FINGERED 1, allows input of

fraction chords with the lowest keyboard

note as the bass note.

■ CASIO CHORD

With CASIO CHORD, you can use

simplified fingerings to play the four types

of chords described below.

CASIO CHORD Fingering

• When playing a minor, seventh, or minor seventh chord, it

makes no different whether the additional keys you press

are black or white.

■ FULL RANGE CHORD

With this mode, you can use the full range

of the keyboard to play chords and the

melody.

See the separate “Appendix” for

information about chords that are

supported.

Accompaniment keyboard

Chord Type Example

Major Chords

Letters above the accompaniment

keyboard indicate the chord assigned

to each key. Pressing a single

accompaniment area key in the

CASIO CHORD mode will play the

major chord whose name is marked

above the key. All of the

accompaniment area keys that are

marked with the same chord name

play exactly the same chord.

C (C Major)

Minor Chords

To play a minor chord, press the

accompaniment area key that

corresponds to the major chord, while

also pressing one other

accompaniment area key to the right.

Cm (C Minor)

Seventh Chords

To play a seventh chord, press the

accompaniment area key that

corresponds to the major chord, while

also pressing two other

accompaniment area keys to the right.

C7 (C Seventh)

Minor Seventh Chords

To play a minor seventh chord, press

the accompaniment area key that

corresponds to the major chord, while

also pressing three other

accompaniment area keys to the right.

Cm7

(C Minor Seventh)

DE F F

DE F

DE F F

DE F

DE F F

DE F

DE F F

DE F

Accompaniment keyboard / Melody keyboard

English

Using Auto Accompaniment

E-41

Use the following procedures to play intro and ending

patterns, to play fill-in patterns, and to play variations of basic

Auto Accompaniment patterns.

■ Auto Accompaniment Variation

Each Auto Accompaniment pattern has a basic “normal

pattern” as well as a “variation pattern”.

Press

This starts the variation pattern.

Pressing

returns to normal pattern.

■ Auto Accompaniment Intro

Use the following procedure to play an intro of a few

measures.

Press

This starts the intro pattern. Normal pattern play will start

when the intro pattern is finished.

• If you press

while an intro pattern is being played,

the variation pattern will start when the intro pattern is

finished.

■ Auto Accompaniment Fill-in

Use the procedure below to play a fill-in pattern during a

performance.

• A “fill-in” is a short phrase played where you want to change

the mood of a piece. A fill-in pattern can be used to create a

link between two melodies or an accent.

• Normal and variation patterns have their own unique fill-in

patterns.

● Normal Pattern Fill-in

While a normal pattern is playing, press

This plays the fill-in for the normal pattern.

• Normal pattern play will resume after the fill in pattern is

complete.

● Variation Pattern Fill-in

While a variation pattern is playing, press

This plays the fill-in for the variation pattern.

• Variation pattern play will resume after the fill in pattern

is complete.

■ Auto Accompaniment Ending

Use the following procedure to play an ending of a few

measures.

While an Auto Accompaniment is playing, press

This will play the ending pattern and then stop Auto

Accompaniment play automatically.

Using Auto Accompaniment

Effectively

Auto Accompaniment Pattern Variations

Lights

Using Auto Accompaniment

E-42

■ Using Synchro Start

Use the following procedure to configure the Digital Keyboard

to start Auto Accompaniment play as soon as you press a

keyboard key.

Press

This enters accompaniment start standby.

Play a chord on the keyboard.

This will start full part accompaniment (normal).

Any of the following operations can be performed while in

synchro standby to start a non-normal pattern.

• To start with intro pattern, press

• To start with variation pattern play, press

Use the following procedure to change Auto Accompaniment

speed to a level that suits you.

Press

Use y (slower) and t (faster) to change the tempo

setting. Holding down either button changes the setting at

high speed.

•Pressing y and t at the same time will initialize the

tempo setting in accordance with the currently selected

rhythm.

• While the tempo value is flashing, you also can use

(10-key) to change it.

• If you do not perform any operation for a few seconds

after the tempo setting screen appears, the display will

return to the screen displayed before you pressed

Use the following procedure to adjust the balance between

what you are playing on the keyboard and the volume of the

Auto Accompaniment.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “AcompVol” (page

E-6).

Use the

(10-key) [–] and [+] keys to adjust the

accompaniment volume.

With One-Touch Preset, the Digital Keyboard automatically

configures optimal tone, tempo, and other settings in

accordance with the rhythm pattern you select.

Hold down

until the current tone screen

appears on the display.

This will automatically apply the One-Touch Preset

settings in accordance with the rhythm pattern that is

currently selected.

Play a chord on the keyboard.

This will start accompaniment automatically.

Changing Auto Accompaniment Speed

(Tempo)

Flashes

Adjusting the Accompaniment Volume

Using One-Touch Preset

Acom

Vo l

English

Using Auto Accompaniment

E-43

Auto Harmonize automatically adds harmony to notes you

play with your right hand, which adds rich depth to the melody

of your performances. You can select from among 12 types of

Auto Harmonize to suit the type of music you are playing.

• Auto Harmonize is controlled using the same button

the Arpeggiator (page E-56). Because of this, these two

functions cannot be used at the same time.

Press

to enable Auto Accompaniment with

chords (ACCOMP indicator lit) (page E-39).

• Auto Harmonize cannot be used while FULL RANGE

CHORD is selected as the chord input mode. Select

another mode if you want to use Auto Harmonize.

Hold down

until the Auto Harmonize or

Arpeggiator type number and type name appear

on the display.

• If you do not perform any operation for a few seconds,

the display will return to previous screen automatically.

Use the

(10-key) [–] and [+] keys to select the

Auto Harmonize type you want.

• 013 through 102 are Arpeggiator types (page E-56). Do

not select them when using the Auto Harmonize.

Press

to turn on Auto Harmonize.

If you play chords with your left hand and the melody with

your right hand, harmony notes will be added to the

melody.

• Press

again to turn off Auto Harmonize.

Using Auto Harmonize

Due t

Type number Type name

Due t

Type

number

Type Name Description

001 Duet 1

Adds close (separated by 2 to 4

degrees) 1-note harmony below

the melody note.

002 Duet 2

Adds open (separated by more

than 4 to 6 degrees) 1-note

harmony below the melody note.

003 Country Adds country style harmony.

004 Octave

Adds the note from the next lower

octave.

005 5th Adds the fifth degree note.

006 3-Way Open

Adds 2-note open harmony, for a

total of three notes.

007 3-Way Close

Adds 2-note close harmony, for a

total of three notes.

008 Strings

Adds harmony that is optimal for

strings.

009 4-Way Open

Adds 3-note open harmony, for a

total of four notes.

010 4-Way Close

Adds 3-note close harmony, for a

total of four notes.

011 Block Adds block chord notes.

012 Big Band Adds big band style harmony.

S t G r P n o

Lit when on

E-44

Editing Auto Accompaniment Patterns

You can use the procedure in this section to edit the Digital

Keyboard’s built-in Auto Accompaniment rhythm patterns and

create your own “user rhythms”.

• You can store up to 10 user rhythms in Digital Keyboard

memory, using rhythm numbers 181 through 190.

■ Editable Accompaniment Patterns and

Instrument Parts

Any of the following parts that make up each rhythm that is

assigned a rhythm number can be edited.

Accompaniment patterns (intro, fill-in, etc.): 6 types

Instrument parts (drum, bass, etc): 8 types

■ Editable Contents

•Rhythm number

•Part on/off

• Tone number

•Volume level

• Left-right speaker balance (panning)

• Reverb depth (reverb send)

• Chorus depth (chorus send)

Select the number of the rhythm you want to

edit.

Press

If the “Err Mem Full” message appears on the display, see

page E-68 for information about what you should do.

bsbs

88 99 bkbk blbl bmbm ctctbnbn

66 bqbq

Accompaniment Pattern

Instrument

Parts

INTRO

NORMAL

FILL-IN

VARIATION

FILL-IN

ENDING

Button

INNFVVFE

1 Drum I-1 N-1 NF-1 V-1 VF-1 E-1

2 Percussion I-2 N-2 NF-2 V-2 VF-2 E-2

3 Bass I-3 N-3 NF-3 V-3 VF-3 E-3

4 Chord 1 I-4 N-4 NF-4 V-4 VF-4 E-4

5 Chord 2 I-5 N-5 NF-5 V-5 VF-5 E-5

6 Chord 3 I-6 N-6 NF-6 V-6 VF-6 E-6

7 Chord 4 I-7 N-7 NF-7 V-7 VF-7 E-7

8 Chord 5 I-8 N-8 NF-8 V-8 VF-8 E-8

Button

899bkbkbl

To edit and save an Auto Accompaniment

Drm:Rh

Instrument part

Editable contentRhythm number

Lights Accompaniment Pattern (Flashes)

English

Editing Auto Accompaniment Patterns

E-45

Press a button from

to select the

Accompaniment Pattern you want to edit.

The name of the pattern will appear on the display.

Pattern selected by each button

Press

to select the instrument part you want

to edit.

The part number of the part you select will flash on the

display.

Press

This will display the rhythm number.

Use the

(10-key) [–] and [+] keys to select the

rhythm number you want to assign to the

instrument part you are editing.

A different rhythm number is assigned for each instrument

part.

• You can play the data of the currently selected rhythm

number by pressing

• All of the eight instrument parts of an intro (I-1 to 8)

must have the same rhythm number. If you assign

rhythm 003 to I-1, for example, 003 also will be

assigned automatically to parts I-2 through I-8. If you

then assign rhythm 004 to part I-2, for example, I-1 and

all of the other parts also will change to 004. All of the

eight parts of an ending (E-1 to E-8) also must have the

same rhythm number.

To edit the other contents, press

to display

the screen for the setting you want.

• Each press of

will cycle through the settings shown

below, from 1 through 6.

• Use the

(10-key) [–] and [+] keys to change the

currently selected setting.

• You can play the current settings of the editable part by

pressing

* Instrument parts 1 and 2 can be assigned drum set tones

(554 through 570) only.

Repeat steps 4 through 7 as many times as

necessary to edit the parts you want for the

pattern you selected in step 3.

• If you change the rhythm number in step 6, the editable

contents (1 through 6 in the above table) you last

configured in step 7 of this procedure will be overwritten

with the settings of the newly selected rhythm.

Repeat steps 3 through 8 as many times as

necessary to edit the accompaniment patterns

you want (intro through ending).

10.

Press

This will display a message asking if you want to save the

user rhythm.

11-1.

Press the

(10-key) [–] key to exit without

saving.

This displays the delete confirmation message.

Press the

(10-key) [+] key to exit the editing procedure.

:Intro

: Normal, Normal Fill-in

(Each press toggles the selection.)

: Variation, Variation Fill-in

(Each press toggles the selection.)

: Ending

Drm:Rh

Variation selected

Part 6 (Chord 3)

Parts that contain data. Flashing: Part selected for editing.

Setting Type Display Settings

1 Part on/off Part On/Off

2 Tone number* Tone 001 - 553

3 Volume level Vol. 000 - 127

Left-right speaker

balance (panning)

Pan –64 - 0 - +63

Reverb depth

(reverb send)

Rvb 000 - 127

Chorus depth

(chorus send)

Cho. 000 - 127

Editing Auto Accompaniment Patterns

E-46

11-2.

Press the

(10-key) [+] key to save the data.

•Use

(10-key) [–] and [+] keys to select the rhythm

number you want to save.

• You can edit the user rhythm name. Use the

(10-

key) [4] (o) and [6] (p) keys to move the cursor to

the character you want to change, and then use [+] and

[–] to change the character.

12.

Press

(10-key) [7] (ENTER) key.

This will display a message asking if you want to save the

user rhythm.

• Press the

(10-key) [+] key to save the data.

• Press the

(10-key) [–] key to return to the screen

that was displayed before you pressed [7] (ENTER)

key.

• If you select a user rhythm number that already

contains data, the existing data will be replaced by the

new data.

• You cannot change the tone assigned to the keyboard

while an Auto Accompaniment editing (rhythm edit)

operation is in progress.

■ Saving User Rhythm Data on an External Device

See page E-62 for details about how to transfer edited

accompaniment data to a computer for storage.

■ Maintaining User Rhythm Data in Memory

After you save user rhythm data in memory, it will remain

there as long as power is supplied to the keyboard. However,

if you disconnect the AC adaptor when there are no batteries

loaded, user rhythm data will be deleted.

Tips for Maintaining Data

• Use both batteries and the AC adaptor together.

• Make sure that batteries with sufficient power are loaded

whenever you disconnect the AC adaptor.

• Connect the AC adaptor to the keyboard and plug it into a

power outlet before replacing batteries.

Before connecting or disconnecting the AC adaptor or

replacing batteries, first press

to turn off power.

Funk 8Bt

English

Editing Auto Accompaniment Patterns

E-47

The following procedure cannot be performed while an Auto

Accompaniment editing (rhythm edit) operation is in progress.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “DELETE” (page

E-6).

Press the

(10-key) [7] (ENTER) key.

Press the

(10-key) [6] (p) key.

Use the

(10-key) [–] and [+] keys to select the

user rhythm you want to delete.

Press the

(10-key) [7] (ENTER) key.

This displays a delete confirmation message.

Press the

(10-key) [+] (YES) key.

After the delete procedure is complete, “Complete” will

appear followed by the screen in step 2 of the above

procedure.

• To cancel the delete operation, press [–] (NO) or [9]

(EXIT) in place of [+] (YES).

To delete saved data

Used memory (Unit: Kbytes)

Remaining memory capacity

D E L E T E

Flashes

Use 1

User rhythm name

Sure?

E-48

Saving Keyboard Setups to Registration Memory

Registration memory lets you store Digital Keyboard setups

(tone, rhythm, etc.) for instant recall whenever you need them.

Registration memory simplifies performance of complex

pieces that require successive tone and rhythm changes.

You can have up to 32 setups in Registration memory at one

time.

and

are used for recording.

• Each press of bank select button

cycles through the

bank numbers, from 1 to 8.

• Pressing a button from

selects the corresponding

area in the currently selected bank.

■ Registration Save Example

This example saves the data shown in the table below to the

following setups in Bank 1.

• Initial melody setup saved to Setup 1-1.

• Second melody setup saved to Setup 1-2.

• Third melody setup saved to Setup 1-3.

■ Registration Memory Data

The following is the complete list of data that is saved to a

registration memory setup.

• Tone numbers (main, layer, split)

• Rhythm number

• Tempo

• Auto Harmonize

• Transpose

• Split point

• Touch Response

• Octave shift

• Chord fingerings

• Accompaniment volume

• Arpeggiator setting (on, off, type)

• Synchro start

• Reverb (on, off, type)

• Chorus (on, off, type)

• Accomp (on, off)

• Arpeggiator hold (on, off)

• Layer (on, off)

• Split (on, off)

• Pedal effect

bsbs

btbt ckck clcl cmcm cncn coco

bqbq

ctctcscs

Area 1 Area 2 Area 3 Area 4

Bank 1 Setup 1-1 Setup 1-2 Setup 1-3 Setup 1-4

Bank 2 Setup 2-1 Setup 2-2 Setup 2-3 Setup 2-4

Bank 8 Setup 8-1 Setup 8-2 Setup 8-3 Setup 8-4

bt ck cl cm cn

Setup 1–1 Setup 1–2 Setup 1–3

Tone Number 001 062 001

Rhythm Number 118 005 089

Tempo 080 140 089

English

Saving Keyboard Setups to Registration Memory

E-49

Press

and

at the same time to enable

registration.

•Pressing

and

at the same time again will disable

registration.

Configure the tone, rhythm, and other settings

you can to include in the setup.

Press

to select the bank you want.

Each press of

cycles through the bank numbers.

• You also can select a bank by holding down

as you

use the

(10-key) number buttons to enter a bank

number.

While holding down

, press a button from

to select an area.

This will save the settings you configured in step 3 into the

applicable setup.

• If there is anything already stored in the setup, it will be

replaced (deleted) by the new setup.

Press

to select the bank that contains the

setup you want to recall.

Use buttons

to select the area whose

setup you want to recall.

This will recall the registration memory setup and

automatically configure the Digital Keyboard settings

accordingly.

• Notes currently being sounded by the keyboard may stop if

you recall a setup that causes a change in octave shift

(page E-18). To keep this from happening, either select a

setup that does not cause a change in the octave shift

setting, or hold down the pedal (which will cause notes

currently being played to be sustained).

■ Saving registration Data on an External Device

See page E-62 for details about how to transfer registration

data to a computer for storage.

■ Maintaining Data in Registration Memory

After you save data in registration memory, it will remain there

as long as power is supplied to the keyboard. However, if you

disconnect the AC adaptor when there are no batteries

loaded, data in registration memory will be deleted.

Tips for Maintaining Data

• Use both batteries and the AC adaptor together.

• Make sure that batteries with sufficient power are loaded

whenever you disconnect the AC adaptor.

• Connect the AC adaptor to the keyboard and plug it into a

power outlet before replacing batteries.

Before connecting or disconnecting the AC adaptor or

replacing batteries, first press

to turn off power.

To save a setup to registration

memory

Lit when on

Bank number

Bank 4

Store

Stored in Setup 4-1

To recall a setup from registration

memory

Bank 6

Reca l l

Setup 6-1 recalled

E-50

Recording Your Keyboard Play

The recorder feature lets you record your keyboard play.

Use the following procedure to record everything you play on

the keyboard.

Press

again.

This will enter record stnadby.

Configure the tone, rhythm, and other settings

you want to use.

Start playing.

Recording starts as soon as you play something on the

keyboard.

• You can use Auto Accompaniment while playing. If you do,

Auto Accompaniment also will be recorded.

To stop recording, press

To play back what you have recorded, press

again.

Each press of

starts and stops playback.

bsbs

bpbp

bmbm btbt ckck clcl cmcm cncn cocobnbn

55 brbrbqbq

Recording and Playing Back

Keyboard Play

Lights

Flashes

Lights

English

Recording Your Keyboard Play

E-51

Press

twice to exit the recorder mode.

• The flashing on the screen shown in step 3 becomes

faster when remaining recorder memory capacity

becomes less than 100 notes.

• Total recorder memory capacity is approximately

12,000 notes. Recording will stop automatically when

there is no more unused recorder memory remaining.

• Each press of

cycles through the settings shown

below. You can listen to the recorded data as many

times as you like by pressing

while in playback

standby.

■ To delete recorded data

After step 3 of the above procedure, hold down

(without

pressing any keyboard key) until the message “Tr.Del?”

appears on the display. Press [+] (YES) to delete the data, or

[–] (NO) to cancel the delete operation.

• Turning off the Digital Keyboard while recording is in

progress will cause any data in recorder memory to be

deleted.

• A new recording replaces (deletes) previously recorded

contents.

■ Maintaining Data in Recorder Memory

After you save data in recorder memory, it will remain there as

long as power is supplied to the keyboard. However, if you

disconnect the AC adaptor when there are no batteries

loaded, data in recorder memory will be deleted.

Tips for Maintaining Data

• Use both batteries and the AC adaptor together.

• Make sure that batteries with sufficient power are loaded

whenever you disconnect the AC adaptor.

• Connect the AC adaptor to the keyboard and plug it into a

power outlet before replacing batteries.

Before connecting or disconnecting the AC adaptor or

replacing batteries, first press

to turn off power.

You can divide a song according to various types of parts

(instrument, left and right hand, etc.), and record each part to

a specific track. You can mix up to six tracks (the original track

plus five additional tracks) into a final song.

■ About tracks

Tracks are numbered from 1 to 6.

• If you do not specify a track number when recording,

recording is performed to Track 1 automatically.

In addition to what you play on the keyboard, the following

information also is recorded.

• Track 1

Settings:

Tone number, rhythm number, tempo, reverb, chorus,

chords, layer/split settings, Auto Harmonize/Arpeggiator

setting

Operations:

Pedal, INTRO button, SYNCHRO/ENDING button,

NORMAL/FILL-IN button, VARIATION/FILL-IN button

• Tracks 2 through 6

Tone number, pedal operation

Disappears

Recorder Off

Playback

Standby

Record

Standby

Disappears Lights Flashes

Using Tracks to Record and Mix

Parts

Recording Your Keyboard Play

E-52

Record the first part to Track 1.

To record to Track 1, perform steps 1 through 6 under

“Recording and Playing Back Keyboard Play” (page

E-50).

Press

This will enter record standby.

Press a button from

to select the track

number of the next track to which you want to

record.

This will enter record standby for the track you selected.

Example: Track 2

• If you want to use a different tone than the one you

used in Track 1, press

and then use

(10-key) to

input the tone number.

Press

This will start playback of what you recorded up to this

point in other tracks and record what you play on the

keyboard to the currently selected track. Play the notes

you want on the keyboard.

To stop recording, press

• To play back what you have recorded, press

again.

Each press of

starts and stops playback.

Repeat steps 2 through 5 to record the other

tracks.

After you finish recording all of the tracks,

press

• This will start playback of the recorded tracks. Press

to stop or restart playback.

• At this time you can turn off playback of specific tracks

using buttons

. Pressing a key toggles playback

of each track on (track number displayed) or off (track

number not displayed).

• If you want to re-record a track, press

. This will

return to step 2 of the above procedure. Only the tracks

that are turned on (displayed) above will play as you

re-record.

Example: Tracks 2 and 3 selected

Press

twice to exit the recorder mode.

■ To delete a recorded track

After step 3 of the above procedure, hold down

(without

pressing any keyboard key) until the message “Tr.Del?”

appears on the display. Press [+] (YES) to delete the track, or

[–] (NO) to cancel the delete operation.

To record to Tracks 1 through 6

Lights

Flashes

Disappears

English

Recording Your Keyboard Play

E-53

You can record up to five songs (numbered 1 through 5) in

memory. After that, you can select a specific song for

playback.

Press

A song number will appear in the upper left corner of the

display for a few seconds. While it is, use

(10-key) to

specify the number of the song you want to record or play

back. The song number will disappear if you do not

perform any operation.

Example: Song 2

Press

to record, or

to play back.

To stop recording or playback, press

Press

twice to exit the recorder mode.

■ To delete recorded data

After step 2 of the above procedure, hold down

(without

pressing any keyboard key) until the message “Song Del?”

appears on the display. Press [+] (YES) to delete the song, or

[–] (NO) to cancel the delete operation.

This section explains how to play along and record along with

one of the Digital Keyboard’s built-in songs.

● The following operations and settings also are

recorded along with your keyboard play.

Tone number, song number, pedal operation, tempo, reverb,

chorus, layer/split settings

• There can be only one recording of keyboard play with a

built-in song in recorder memory. Making a new recording

replaces (deletes) previously recorded data.

Press

This will enter playback standby.

Press

again.

This will enter record standby.

Use

(10-key) to enter the song number you

want to assign to the recording.

Recording Two or More Songs,

and Selecting One for Playback

P l a

N o .

Recording while Playing Along

with a Built-in Song

Lights

Flashes

Recording Your Keyboard Play

E-54

Press

to cycle through the parts in the

sequence shown below.

Example: Left-hand part recording

• Configure tone and tempo settings at this time as well.

Press

to start built-in song playback and

recorder recording.

Play along with the playback.

• To stop recording part way through, press

Recording will stop automatically when the end

of the built-in song is reached.

This will enter playback standby.

Press

This will start playback of what you recorded.

• Each press of

starts and stops playback.

Press

twice to exit the recorder mode.

■ To delete recorded data

After step 2 of the above procedure, hold down

until the

message “Song Del?” appears on the display. Press [+] (YES)

to delete the song.

See page E-62 for details about how to transfer recorded data

to a computer for storage.

Right-hand Recording

Both-hand Recording

Left-hand Recording

Flashes

Lights

Disappears

Saving Recorded Data on an

External Device

English

E-55

Other Useful Digital Keyboard Functions

You can use the procedure in this section to change the scale

(tuning system) of the keyboard from the standard equal

temperament to another scale that is more suitable for playing

Indian music, Arabic music, ancient classics, etc.

You can select from among the 17 preset scales listed below.

Press

Use the

(10-key) [–] and [+] keys to select the

preset scale you want. After selecting a scale,

press the key on the keyboard that you want to

use as the root key (C to B).

After you are finished, press

to assign the

scale to the keyboard.

You can use the following procedure to reflect the scale you

adjusted using the scale fine tune or the quarter tone function,

or the preset scale you selected with the preset function in

Auto Accompaniments.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “OTHER” (page

E-6).

Press

(10-key) [7] (ENTER) key.

Use the

(10-key) [4] (o) and [6] (p) keys

to display “AcompScl”.

Use the

(10-key) [+] key to select on.

bsbs

bpbp44

crcr ctct

bqbq

Changing the Scale of the

Keyboard

No. Scale name Display

00 Equal Temperament Equal

01 Pure Major PureMajr

02 Pure Minor PureMinr

03 Pythagorean Pythagor

04 Kirnberger 3 Kirnbrg3

05 Werckmeister Wercmeis

06 Mean-Tone MeanTone

07 Rast Rast

08 Bayati Bayati

09 Hijaz Hijaz

10 Saba Saba

11 Dashti Dashti

12 Chahargah Chaharga

13 Segah Segah

14 Gurjari Todi GujrTodi

15 Chandrakauns Cndrkuns

16 Charukeshi Carukesi

Using the Current Scale Notes for Auto

Accompaniments

u a l

Scale nameScale number

OTHER

Flashes

Other Useful Digital Keyboard Functions

E-56

Selecting a Music Preset instantly changes the Digital

Keyboard to a preset setup (tone, rhythm, tempo, etc.) for play

of songs of various genres/categories. The press of a button

sets up the Digital Keyboard so those songs sound exactly the

way you thought they should.

• See the separate “Appendix” for a complete list of the 305

Music Presets that are available.

Hold down

until the indicator shown below

appears on the display.

Use

(10-key) to select the preset number you

want.

This will change the setup (tone, rhythm, etc.) of the

Digital Keyboard.

• At this time the Digital Keyboard will go into Auto

Accompaniment synchro start standby (page E-42).

•Pressing

, or

will return to the screen that was

displayed before you held down in step 1, above.

Play along on the keyboard with the

accompaniment.

The Arpeggiator makes it possible to play an arpeggio pattern

automatically. There are 90 different arpeggio patterns from

which to choose in order to match the music you are playing.

• The Arpeggiator is controlled using the same button

Auto Harmonize (page E-43). Because of this, these two

functions cannot be used at the same time.

Hold down

until the Auto Harmonize or

Arpeggiator type number and type name appear

on the display.

• If you do not perform any operation for a few seconds,

the display will return to the previous screen

automatically.

Use the

(10-key) [–] and [+] keys to select the

Arpeggiator type you want.

• 001 through 012 are Auto Harmonize types (page

E-43). Do not select them when using the Arpeggiator.

Using Music Preset

I L o v e H e r

Preset number Preset name

Lights

Using the Arpeggiator

Type

number

Type Name Description

013 - 030 Up Rising

031 - 048 Down Falling

049 - 066 U/D A

Repeat pattern alternating

between rising and falling

(Type A)

067 - 084 U/D B

Repeat pattern alternating

between rising and falling

(Type B)

085 - 102 Random

Random arrangement of

notes of the pressed keys

D u e t 1

Type number Type name

1 U

Speed (The number of arpeggio notes per beat)

Octave

1 .. Uses the actual notes played.

2 .. Uses the actual notes played plus the same notes one octave.

4 .. Uses the actual notes played plus the same notes three octaves.

English

Other Useful Digital Keyboard Functions

E-57

Press

to turn on Arpeggiator.

Playing a chord on the keyboard will start arpeggio play.

•Press

again to turn off Arpeggiator.

• The tempo setting of the Arpeggiator is the same as that set

for the metronome (page E-12).

Use the following procedure when you want an arpeggio

pattern to keep playing after you release the keyboard keys.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “OTHER” (page

E-6).

Press

(10-key) [7] (ENTER) key.

Press the

(10-key) [+] key to select the ON

setting.

You can use the following procedure to delete user song data

stored as song numbers 153 through 162.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “DELETE” (page

E-6).

Press the

(10-key) [7] (ENTER) key.

Press the

(10-key) [6] (p) button twice.

Use the

(10-key) [–] and [+] keys to select the

user song you want to delete.

Press the

(10-key) [7] (ENTER) key.

This displays a delete confirmation message.

Press the

(10-key) [+] (YES) key.

After the delete procedure is complete, “Complete” will

appear followed by the screen in step 2 of the above

procedure.

• To cancel the delete operation, press [–] (NO) or [9]

(EXIT) in place of [+] (YES).

Sustaining an Arpeggio (Arpeggiator Hold)

S t . G r P n o

Lit when on

A r

H l d

Deleting User Song Data

Used memory (Unit: Kbytes)

Remaining memory capacity

D E L E T E

Flashes

U S E R S O N G

User song name

S u r e ?

Other Useful Digital Keyboard Functions

E-58

Use the following procedure when you want to delete sampled

sounds, user songs and all other data, except for recorded

songs, currently in Digital Keyboard memory.

• Performing this procedure also will delete protected

sampled sound data (page E-26). It is recommended

that you save important data to your computer’s hard

disk (page E-59).

• This operation does not delete recorded song data.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “DELETE” (page

E-6).

Press the

(10-key) [7] (ENTER) key.

Use the

(10-key) [4] (o) and [6] (p) keys

to display “All Data”.

Press the

(10-key) [7] (ENTER) key.

This displays a delete confirmation message.

Press the

(10-key) [+] (YES) key.

After the delete procedure is complete, “Complete” will

appear followed by the screen in step 2 of the above

procedure.

• To cancel the delete operation, press [–] (NO) or [9]

(EXIT) in place of [+] (YES).

Deleting All Data in Digital

Keyboard Memory

Used memory (Unit: Kbytes)

Remaining memory capacity

D E L E T E

Flashes

A l l D a t a

Flashes

S u r e ?

English

E-59

Connecting External Devices

You can connect the Digital Keyboard to a computer and

exchange MIDI data between them. You can send play data

from the Digital Keyboard to music software running on your

computer, or you can send MIDI data from your computer to

the Digital Keyboard for playback.

The following shows the minimum computer system

requirements for sending and receiving MIDI data. Check to

make sure that your computer complies with these

requirements before connecting the Digital Keyboard to it.

• Operating System

Windows

XP (SP2 or later)

Windows Vista

Mac OS

X (10.3.9, 10.4.11 or later, 10.5.2 or later)

•USB port

• Never connect to a computer that does not conform to

the above requirements. Doing so can cause problems

with your computer.

• Make sure you follow the steps of the procedure below

exactly. Connecting incorrectly can make data send

and receive impossible.

Turn off the Digital Keyboard and then start up

your computer.

• Do not start up the music software on your computer

yet!

After starting up your computer, use a

commercially available USB cable to connect it

to the Digital Keyboard.

Turn on the Digital Keyboard.

• If this is the first time you are connecting the Digital

Keyboard to your computer, the driver software

required to send and receive data will be installed on

your computer automatically.

Start up your computer’s music software.

bsbs

ctctbnbn

Connecting a Computer

Minimum Computer System Requirements

*1: Windows XP Home Edition

Windows XP Professional (32- bit)

*2: Windows Vista (32- bit)

Connecting the Digital Keyboard to Your

Computer

Computer USB port

A connector

Digital Keyboard USB port

B connector

USB cable

(A-B type)

Connecting External Devices

E-60

Configure the music software settings to select

one of the following as the MIDI device.

• For information about how to select the MIDI device,

see the user documentation that comes with the music

software you are using.

• Be sure to turn on the Digital Keyboard first before

starting up your computer’s music software.

• Once you are able to connect successfully, there is no

problem with leaving the USB cable connected when you

turn off your computer and/or Digital Keyboard.

• This Digital Keyboard conforms to General MIDI Level 1

(GM).

• For detailed specifications and connections that apply to

MIDI data send and receive by this Digital Keyboard, see

the latest support information provided by the website at the

following URL.

http://world.casio.com/

A keyboard channel is the channel used for sending Digital

Keyboard data to a computer. You can select the channel you

want for sending Digital Keyboard data to a computer.

• The keyboard channel setting range is 01 to 16.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “MIDI” (page E-6).

Press

(10-key) [7] (ENTER) key.

Use the

(10-key) [–] and [+] keys to change

the keyboard channel.

The navigate channels can be used to display only the notes

of a particular channel (part) as on-screen guide information

from among the note information of a tune sent from the

computer.

■ Specifying the Navigate Channels

From among the 16 available channels (numbered 01 to 16),

you can specify any two neighboring channels (such as 05

and 06) as navigate channels. The smaller numbered channel

is the navigate (L) channel, while the larger numbered

channel is the navigate (R) channel. Specifying the navigate

(R) channel will automatically configure the navigate (L)

channel as well.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “MIDI” (page E-6).

Press

(10-key) [7] (ENTER) key.

Use the

(10-key) [4] (o) and [6] (p) keys

to display “Navi. Ch”.

Use the

(10-key) to specify the navigate (R)

channel.

This also will automatically configure the next lower

channel number as the navigate (L) channel.

CASIO USB-MIDI : (For Windows Vista, Mac OS X)

USB Audio Device : (For Windows XP)

MIDI Settings

Keyboard Channel

M I D I

Flashes

K e

b d C h

Navigate Channels

N a v i . C h

English

Connecting External Devices

E-61

■ Turning Off the Navigate Channel Sound and

Playing the Part on the Keyboard

You can turn off the sound on one or both of the navigate

channels and play the cancelled part on the keyboard

yourself.

Press

to select the channel setting you want

to turn off.

Each press of

cycles through settings (1) thorough (4)

described below.

• If you turn off one channel, you can play the cancelled

part on the keyboard using the same tone as the

channel you turned off. If you turn off both channels

(option (3)), what you play on the keyboard sounds

using the tone of the navigate (R) channel.

There are times when exchanging data with a computer when

you may not want the Digital Keyboard to sound notes you

play on its keyboard. The local control setting lets you do just

that.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “MIDI” (page E-6).

Press

(10-key) [7] (ENTER) key.

Use the

(10-key) [4] (o) and [6] (p) keys

to display “Local”.

Use the

(10-key) [–] and [+] keys to specify

the local control setting.

Enabling the Accomp Out setting causes Auto

Accompaniment data to be sent to the computer.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “MIDI” (page E-6).

Press

(10-key) [7] (ENTER) key.

Use the

(10-key) [4] (o) and [6] (p) keys

to display “AcompOut”.

Use the

(10-key) [–] and [+] keys to turn

Accomp Out on or off.

Navigate (L)

Channel

Navigate (R)

Channel

Sound

On-

screen

Guide

Sound

On-

screen

Guide

(1) R only displayed { ××{

(2) L only displayed × {{ ×

(3) LR displayed × { × {

(4) LR nor displayed {{{{

Selected channel indicator appears.

Local Control

Accomp Out

L o c a l

A c o m

O u t

Connecting External Devices

E-62

You can transfer sampled sounds, recorded songs, and other

data in Digital Keyboard memory to a computer for storage.

You also can load standard MIDI file (SMF) data, and Auto

Accompaniment data you download from the CASIO website

to the Digital Keyboard, which greatly expands the Song Bank

songs and Auto Accompaniment patterns available to you.

A special Data Manager application is required in order to

transfer data to and from the Digital Keyboard.

You can transfer the types of data listed below between the

Digital Keyboard and a computer.

Go to the CASIO WORLDWIDE site at the

following URL.

http://world.casio.com/

At the site, select a geographic area or country.

After accessing the area site, navigate to the

minimum computer system requirements for

Data Manager for this product.

• You should be able to find a link to Data Manager

information on the product introduction page of this

product. If you cannot find such a link, use the search

form of the area site where you are located to enter the

model name of this product and search for it.

• Note that site contents are subject to change without

notice.

Check if your computer system complies with

the minimum requirements for Data Manager.

Download Data Manager and its user’s guide to

your computer.

Follow the procedure in the user’s guide that

you downloaded in step 5 to install and use

Data Manager.

• You can download accompaniment data from the

Internet Data Expansion system of the CASIO MUSIC

SITE (http://music.casio.com/) and load it into the

memory of this Digital Keyboard. Note that there is not

any accompaniment data intended specifically for this

model, so you should use data for other models.

• Since the accompaniment data is for other models, you

may experience some abnormalities when playing it on this

model.

■ Maintaining Data in Memory

After you save data in memory, it will remain there as long as

power is supplied to the keyboard. However, if you disconnect

the AC adaptor when there are no batteries loaded, saved

data will be deleted.

Tips for Maintaining Data

• Use both batteries and the AC adaptor together.

• Make sure that batteries with sufficient power are loaded

whenever you disconnect the AC adaptor.

• Connect the AC adaptor to the keyboard and plug it into a

power outlet before replacing batteries.

Before connecting or disconnecting the AC adaptor or

replacing batteries, first press

to turn off power.

Storing and Loading Digital

Keyboard Memory Data

Data Types Supported for Data Transfer

Data Type Description

File Name

Extension

Sampled sound

(page E-19)

Sampled sound data

TW7

DW7

User rhythms

(page E-44)

Edited Auto

Accompaniment data

AC7

User songs

(page E-30)

Song data loaded from a

computer (Cannot be sent

from the Digital Keyboard

to a computer.)

CM2

MID

Recorded songs

(page E-50)

Recorded song data

SP7

SL7

Registration

setups

(page E-48)

Tone and rhythm setup

settings

RM7

All data Above data AL7

*1: Sampled drum set sounds

*2: Standard MIDI file (format 0, 1)

*3: Data recorded playing along with built-in song

Downloading Data Manager

English

Connecting External Devices

E-63

This Digital Keyboard can be connected to commercially

available stereo, amplifier, or recording equipment, to a

portable audio player or other equipment.

Connection requires commercially available connecting cords,

supplied by you.

• Turn off the external device when making connections.

After connecting, turn down the Digital Keyboard and

external device volume levels whenever turning power

on or off.

• After connecting, turn on the Digital Keyboard and then

the external device.

• If keyboard notes sound distorted when they are

sounded from external audio equipment, lower the

Digital Keyboard’s volume setting.

Connection requires commercially available connecting cords,

supplied by you. The connecting cords should have a stereo

mini plug on one end and a plug that matches the

configuration of the external device on the other end.

• Turn off the Digital Keyboard when making

connections. After connecting, turn down the Digital

Keyboard and external device volume levels whenever

turning power on or off.

• After connecting, turn on the external device and then

the Digital Keyboard.

• If notes are distorted when they are sounded on the

external device, lower the volume setting of the

external device.

Connecting to Audio Equipment

Outputting Keyboard Notes to Audio

Equipment

Digital Keyboard PHONES/OUTPUT jack

Stereo standard plug

Audio equipment, amplifier,

etc.

Playing an External Device from the Digital

Keyboard

Stereo mini plug

Digital Keyboard AUDIO IN jack

Portable audio player, etc.

E-64

Reference

Troubleshooting

Symptom Action

Included Accessories

I can’t find something that should be here. Carefully check inside all of the packing materials.

Power Requirements

Power will not turned on. • Check the AC adaptor or make sure that the batteries are facing

correctly (page E-8).

• Replace the batteries with new ones or switch over to AC adaptor

power (page E-8).

The Digital Keyboard outputs a loud sound and then

suddenly powers down.

Replace the batteries with new ones or switch over to AC adaptor

power (page E-8).

The Digital Keyboard suddenly powers down after a

few minutes.

This happens when Auto Power Off (page E-9) is triggered.

Display

The display keeps going out or are flashing. Replace the batteries with new ones or switch over to AC adaptor

power (page E-8).

On-screen keyboard keys or notes remain on the

display.

A Step Up Lesson is in progress and the Digital Keyboard is waiting for

you to play the next note in the song. To stop this from happening,

cancel the lesson (page E-33).

Screen contents are visible only from straight ahead. This is dues to production limitations. It does not indicate malfunction.

Sound

Nothing happens when I press any keyboard key. • Adjust the main volume setting (page E-9).

• Check if something is plugged into

(PHONES/OUTPUT jack) on

the back of the Digital Keyboard.

• If there is no sampled sound in memory, nothing will play if you press

a keyboard key while a tone in the range of 571 to 578 is selected

(page E-20).

• Turn power off and then back on to initialize all keyboard settings

(page E-9).

Nothing happens or notes do not play normally when

I play notes on the left side of the keyboard.

Press

to disable chord input in the accompaniment keyboard area

(page E-39).

Nothing happens when I start an Auto

Accompaniment.

• With rhythms 170, and 172 to 180, nothing will sound until you play a

chord on the keyboard. Try playing a chord (page E-39).

• Check and adjust the accompaniment volume setting (page E-42).

• If there is no user rhythm stored in memory, Auto Accompaniment

will not start when you press

while a rhythm in the range of 181 to

190 is selected (page E-44).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

Nothing happens when I start playback of a built-in

song.

• It takes a little time after you press the button until the song starts to

play. Wait for a moment for the song to start.

• Check and adjust the song volume (page E-30).

• If there is no user song stored in memory, song playback will not

start when you press

while a song in the range of 153 to 162 is

selected (page E-30).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

The metronome does not sound. • Check and adjust the accompaniment volume setting (page E-42).

• Check and adjust the song volume (page E-30).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

English

Reference

E-65

Notes keep sounding, without stopping. • Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

• Replace the batteries with new ones or switch over to AC adaptor

power (page E-8).

Some notes are cut off while they are playing. Notes are cut off whenever the number of notes being sounded

exceeds the maximum polyphony value of 48 (24 for some tones). This

does not indicate malfunction. See “Maximum Polyphony” in the “Tone

List” in the separate “Appendix”.

The volume or tone setting I made has changed. • Adjust the main volume setting (page E-9).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

• Replace the batteries with new ones or switch over to AC adaptor

power (page E-8).

Output volume does not change even though is

change my keyboard touch.

• Change the Touch Response setting (page E-10).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

In certain keyboard ranges, the volume and tone

quality sound are slightly different from those in other

keyboard ranges.

This is due to system limitations. It does not indicate malfunction.

With some tones, octaves do not change at the far

ends of the keyboard.

This is due to system limitations. It does not indicate malfunction.

The pitch of the notes does not match other

accompanying instruments or sounds strange when

played long with other instruments.

• Check and adjust the transpose (page E-17) and tuning settings

(page E-17).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

The reverb of notes seems to change suddenly. • Check and adjust the reverb setting (page E-16).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-9).

Operation

When I perform a skip forward or skip back

operation, the skip operation moves multiple song

measures instead of only a single measure.

While song playback is stopped or a Step Up Lesson is in progress,

skip forward and skip back operations are performed in phrase units

(page E-28).

Tone, rhythm, and other settings revert to their initial

defaults whenever you turn on the Digital Keyboard.

Though Digital Keyboard settings reset when you turn off the Digital

Keyboard, you can save setups to registration memory for instant recall

whenever you need them (page E-48).

Computer Connection

I can’t exchange data between the Digital Keyboard

and a computer.

• Check to make sure that the USB cable is connected to the Digital

Keyboard and computer, and that the device is selected correctly

with your computer’s music software settings (page E-59).

• Turn off the Digital Keyboard and then exit the music software on

your computer. Next, turn the Digital Keyboard back on and then

restart the music software on your computer.

Symptom Action

Reference

E-66

Specifications

Model WK-210

Keyboard 76 standard-size keys

Touch Response 2 types, Off

Maximum Polyphony 48 notes (24 for certain tones)

Tones

Built-in Tones 570

Sampling Tones Up to 8 (Melody Sampling: 5, Drum Sampling: 3)*

Up to 10 seconds

Functions Layer, Split

Reverb 1 to 10, Off

Chorus 1 to 5, Off

Voice Pad 5 pads × 4 sets

(3 sets for sampled sounds, 1 set for percussion only)

Metronome

Beats per Measure 0, 2 to 6

Tempo Range 30 to 255

Song Bank

Built-in Songs 152

User Songs Up to 10*

Step Up Lesson

Lessons 4 (Listen, Watch, Remember, Auto)

Lesson Part L, R, LR

Functions Repeat, Voice Fingering Guide, Note Guide, Performance Evaluation

Music Challenge 20 notes

Auto Accompaniment

Built-in Rhythms 180

User Rhythms Up to 10 (Accompaniment Edit)*

Registration 32 (4 setups × 8 banks)

Recorder Real-time recording, playback

Keyboard Play 5 songs, 6 tracks

Playing Along with a

Built-in Songs 1 song (L, R, LR)

Memory Capacity Approximately 12,000 notes (total for 6 songs)

Other Functions

Transpose ±1 octaves (–12 to +12 semitones)

Octave Shift Upper/Lower ±2 octaves

Tuning A4 = approx. 440 Hz ±100 cents

Preset Scales 17

Music Preset 305

One Touch Preset 180

Auto Harmonize 12 types

Arpeggiator 90 types

MIDI 16 multi-timbre received, GM Level 1 standard

Musical Information Function Tone, Rhythm, Song Bank, numbers and names; staff notation, fingering, pedal operation,

tempo, measure and beat number, chord name, etc.

English

Reference

E-67

• Design and specifications are subject to change without notice.

* This data is stored in a shared memory area with a total capacity of approximately 320Kbytes (1Kbyte = 1,024bytes).

Be sure to read and observe the following operating precautions.

■ Location

Avoid the following locations for this product.

• Areas exposed to direct sunlight and high humidity

• Areas subjected to temperature extremes

• Near a radio, TV, video deck, or tuner

The above devices will not cause malfunction of the product, but interference from the product can cause audio or video

interference of a nearby device.

■ User Maintenance

• Never use benzine, alcohol, thinner, or other chemical agents to clean the product.

• To clean the product or its keyboard, wipe with a soft cloth moistened in a weak solution of water and a mild neutral detergent.

Wring all excess moisture from the cloth before wiping.

■ Included and Optional Accessories

Use only accessories that are specified for use with this product. Use of unauthorized accessories creates the risk of fire, electric

shock, and personal injury.

■ Weld Lines

Lines may be visible on the exterior of the product. These are “weld lines” that result from the plastic molding process. They are not

cracks or scratches.

■ Musical Instrument Etiquette

Always be aware of others around you whenever using this product. Be especially careful when playing late at night to keep the

volume at levels that do not disturb others. Other steps you can take when playing late at night are closing the window and using

headphones.

Inputs/Outputs

USB port TYPE B

Sustain/Assignable jack Standard jack (sustain, sostenuto, soft, rhythm start/stop)

Phones/Output jack

Stereo standard jack

Output Impedance: 200Ω, Output Voltage: 4.5V (RMS) MAX

Audio In jack Stereo mini jack

Input Impedance: 9kΩ, Input Sensitivity: 200mV

Mic In jack Standard jack

Input Impedance: 3kΩ, Input Sensitivity: 10mV

Power Jack 9V DC

Power Supply 2-way

Batteries 6 D-size zinc-carbon batteries or alkaline batteries

Battery Life Approximately 5 hours continuous operation on zinc-carbon batteries

AC Adaptor AD-5

Auto Power Off Approximately 6 minutes after last key operation (Operates during battery use only)

Speakers 12cm × 2 (Output: 2.5W + 2.5W)

Power Consumption 9V = 7.7W

Dimensions 118.7 × 40.0 × 15.5 cm (46

/4 × 15

/4 × 6

/8 inch)

Weight Approximately 7.2kg (15.9 lbs) (without batteries)

Operating Precautions

Reference

E-68

Error Messages

Display

Message

Cause Action

Err Exist A sampled drum set sound cannot be copied (page

E-23) to a keyboard key because the key already has

a sampled sound assigned to it.

• Delete the sampled sound that is currently assigned

to the key you are copying to (page E-24).

• Copy the sampled sound to another key that does not

yet have a sampled sound assigned to it.

Err Limit The tone number you selected before starting

sampling already has the allowable maximum of eight

sampled sounds assigned to it.

• Delete the one or more of the sampled sounds

currently assigned to the tone number (page E-24).

• Select another tone number that has less than eight

sampled sounds currently assigned to it (page E-22).

Err Mem Full There is not enough memory available for sampling or

Auto Accompaniment editing.

Delete some or all of the following user data from

memory to make room for new data.

Sampled sounds (page E-19), user rhythms (page

E-44), user songs (page E-30)

Err No Data There is no data in the selected user area (tone,

rhythm, song number, etc.)

Select a Digital Keyboard user area that contains data.

Err Protect Sampled sounds are protected. Unprotect one or more of the sampled sounds, which will

allow it to be overwritten or deleted.

Err SizeOver Auto Accompaniment editing cannot be performed

because the accompaniment pattern or instrument

part data is too large.

Select a different accompaniment pattern or instrument

parts.

English

Reference

E-69

Song List

SONG BANK

WORLD

001 TWINKLE TWINKLE LITTLE STAR

002 LIGHTLY ROW

003 LONG LONG AGO

004 ON TOP OF OLD SMOKEY

005 SAKURA SAKURA

006 WHEN THE SAINTS GO MARCHING IN

007 AMAZING GRACE

008 AULD LANG SYNE

009 COME BIRDS

010 DID YOU EVER SEE A LASSIE?

011 MICHAEL ROW THE BOAT ASHORE

012 DANNY BOY

013 MY BONNIE

014 HOME SWEET HOME

015 AURA LEE

016 HOME ON THE RANGE

017 ALOHA OE

018 SANTA LUCIA

019 FURUSATO

020 GREENSLEEVES

021 JOSHUA FOUGHT THE BATTLE OF JERICHO

022 THE MUFFIN MAN

023 LONDON BRIDGE

024 UNDER THE SPREADING CHESTNUT TREE

025 SIPPIN’ CIDER THROUGH A STRAW

026 GRANDFATHER’S CLOCK

027 ANNIE LAURIE

028 BEAUTIFUL DREAMER

029

IF YOU’RE HAPPY AND YOU KNOW IT, CLAP YOUR

HANDS

030 MY DARLING CLEMENTINE

031 LITTLE BROWN JUG

032 HOUSE OF THE RISING SUN

033 SHE WORE A YELLOW RIBBON

034 YANKEE DOODLE

035 MY OLD KENTUCKY HOME

036 SZLA DZIEWECZKA

037 TROIKA

038 WALTZING MATILDA

039 ON THE BRIDGE OF AVIGNON

040 I’VE BEEN WORKING ON THE RAILROAD

041 OH! SUSANNA

042 CAMPTOWN RACES

043 JEANNIE WITH THE LIGHT BROWN HAIR

044 TURKEY IN THE STRAW

045 JAMAICA FAREWELL

EVENT

046 SILENT NIGHT

047 WE WISH YOU A MERRY CHRISTMAS

048 JINGLE BELLS

049 JOY TO THE WORLD

050 O CHRISTMAS TREE

PIANO/CLASSICS

051 MARY HAD A LITTLE LAMB

052 LE CYGNE FROM “LE CARNAVAL DES ANIMAUX”

053 JE TE VEUX

054 SONATA op.13 “PATHÉTIQUE” 2nd Mov.

055 HEIDENRÖSLEIN

056 AIR FROM “SUITE no.3”

057 SPRING FROM “THE FOUR SEASONS”

058 HABANERA FROM “CARMEN”

059 BRINDISI FROM “LA TRAVIATA”

060 HUNGARIAN DANCES no.5

061 MINUET IN G MAJOR

062 MUSETTE IN D MAJOR

063 GAVOTTE (GOSSEC)

064 ARABESQUE (BURGMÜLLER)

065 CHOPSTICKS

066 DECK THE HALL

067 ODE TO JOY

068 AVE MARIA (GOUNOD)

069 SONATINA op.36 no.1 1st Mov.

070 PRELUDE op.28 no.7 (CHOPIN)

071 RÊVERIE

072 GYMNOPÉDIES no.1

073 GOING HOME FROM “FROM THE NEW WORLD”

074 FÜR ELISE

075 TURKISH MARCH (MOZART)

076 SONATA op.27 no.2 “MOONLIGHT” 1st Mov.

077 ETUDE op.10 no.3 “CHANSON DE L’ADIEU”

078 THE ENTERTAINER

079

WEDDING MARCH FROM “MIDSUMMER NIGHT’S

DREAM”

080 AMERICAN PATROL

081 FRÖHLICHER LANDMANN

082 LA CHEVALERESQUE

083 SONATA K.545 1st Mov.

084 LA PRIÈRE D’UNE VIERGE

085 VALSE op.64 no.1 “PETIT CHIEN”

086 LIEBESTRÄUME no.3

087 JESUS BLEIBET MEINE FREUDE

088 CANON (PACHELBEL)

089 SERENADE FROM “EINE KLEINE NACHTMUSIK”

090 MARCH FROM “THE NUTCRACKER”

091 INVENTIONEN no.1

092 PRAELUDIUM no.1 (J.S.BACH)

093 SONATINE op.20 no.1 1st Mov.

094 HUMORESKE (DVO ÁK)

095 DOLLY’S DREAMING AND AWAKENING

096 LA FILLE AUX CHEVEUX DE LIN

097 ARABESQUE no.1 (DEBUSSY)

098 TRÄUMEREI

099 MAPLE LEAF RAG

100 NOCTURNE op.9 no.2 (CHOPIN)

EXERCISE

101 - 150 EXERCISE I / II / III

DEMO TUNES

151 - 152 DEMO TUNES

USER SONGS

153 - 162 USER SONGS

Reference

E-70

Chord Example List

Root

Chord

Type

dim

aug

sus4

sus2

7sus4

add9

madd9

mM7

dim7

(

)

(

)

(

)

AFCC

(

)

(

)

• Since the chord input range is limited, this model may not support some of the chords shown above.

Function Transmitted Recognized Remarks

Basic

Channel

1 - 16

Default

Changed

Note

Number

0 - 127

4 - 127

True voice

After

Touch

Control

Change

Pitch Bender

Key’s

Ch’s

Velocity

9nH v = 1 - 127

9nH v = 0, 8nH V =

9nH v = 1 - 127

9nH v = 0

Note ON

Note OFF

Mode

Mode 3

Default

Messages

Altered

0, 32

6, 38

Bank select

Modulation

Data entry

Volume

Pan

Expression

Hold 1

Model: WK-210 Version : 1.0

(MSB only)

**: no relation

**:sin relación

MIDI Implementation Chart

Program

Change

0 - 127

:True #

System Exclusive

System

Common

: Song Pos

: Song Sel

: Tune

Aux

Messages

Remarks

: Local ON/OFF

: All notes OFF

: Active Sense

: Reset

System

Real Time

: Clock

: Commands

100, 101

120

121

Sostenuto

Soft pedal

Reverb send

Chorus send

RPN LSB, MSB

All sound off

Reset all controller

Mode 1 : OMNI ON, POLY

Mode 3 : OMNI OFF, POLY

Mode 2 : OMNI ON, MONO

Mode 4 : OMNI OFF, MONO

O : Yes

X : No

*1: Depends on tone.

2: RPN : Pitch Bend Sensitivity, Fine Tune, Coarse Tune

3: In accordance with pedal effect setting.

4: Universal System Exclusive Messages :

Master Fine Tuning, Master Coarse Tuning, Reverb Time, Chorus Type

5: Universal System Exclusive Messages :

GM System On/Off, GM2 System On, Master Volume, Master Fine Tuning, Master

Coarse Tuning, Reverb Time, Chorus Type, Chorus Modulation Rate

6: This model’s System Exclusive Message

• For details about footnotes 2, 4, 5, 6, see MIDI Implementation at

http://world.casio.com/.

*1: Depende del tono.

*2: RPN : Sensibilidad a la inflexión de altura tonal, afinación precisa, afinación aproximada

*3: De acuerdo con el ajuste de efecto de pedal.

*4: Mensajes exclusivos de sistema universal : Afinación maestra precisa, afinación

maestra aproximada, tiempo de reverberación, Tipo de coro

*5: Mensajes exclusivos de sistema universal : Sistema GM activado/desactivado, sistema

GM2 activado, volumen general, afinación maestra precisa, afinación maestra

aproximada, tiempo de reverberación, tipo de coro, tasa de modulación al coro

*6: Mensaje exclusivo del sistema de este modelo

• Si desea información sobre las notas al pie de página 2, 4, 5, 6, consulte

Implementación MIDI en http://world.casio.com/

MA0901-A Printed in China

WK210ES1A

This recycle mark indicates that the packaging conforms to

the environmental protection legislation in Germany.

Esta marca de reciclaje indica que el empaquetado se

ajusta a la legislación de protección ambiental en Alemania.

Casio WK-210 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Casio WK-210

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info