586842
37
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
E-35
Release Rate (001 to 127)
This parameter controls the speed of a tones release. The greater the
value, the faster the release of the selected amp envelope.
Pitch Envelope Set (00 to 45)
This parameter controls the pitch of a tone over time.
Pitch (64 to 63)
This parameter controls the overall pitch of the tone. A greater posi-
tive value raises the pitch from standard, while a negative value low-
ers the pitch. A setting of zero sets the pitch to the standard setting
for the selected tone.
Transpose (12 to 12)
This parameter raises and lowers overall tuning by semitone units. A
setting of 12 is one octave lower, while 12 is 1 octave higher.
Level (000 to 127)
This parameter controls the overall volume of the tone. The greater
the value, the greater the volume. Setting a level of zero means that
the tone does not sound at all.
Touch Sensitivity (64 to 63)
This parameter controls changes in the volume of the tone in accor-
dance with the pressure applied to the keyboard keys. A greater pos-
itive value increases the volume of the output as pressure increases,
while a negative value decreases volume with increased keyboard
pressure. A setting of zero specifies no change in output volume in
accordance with keyboard pressure.
Pan (64 to 63)
This parameter controls the stereo center point when using the key-
board's built-in speakers and when otherwise producing stereo out-
put. A larger value moves the center point to the right, while a small-
er value moves it to the left.
Filter Sensitivity (000 to 127)
This parameter controls changes in the quality of the tone in accor-
dance with pressure applied to the keyboard keys. A greater value
increases the change in tone quality as pressure increases, while a
smaller value decreases the change in tone quality. A setting of zero
specifies no change.
733A-E-037A
User Tone Creation Hints
The following hits provide helpful advice on making user tone cre-
ation a bit quicker and easier.
Use a preset tone that is similar to the one you are trying to create.
Whenever you already have a rough idea of the tone you are trying
to create, it is always a good idea to start with a preset tone that is
similar. If you want to use a layered tone, start out with a 2DCO tone.
Determine the most important parameter.
The PCM Set and Amp Envelope Set parameters are the major fac-
tors that determine the overall personality of a tone. Start out with
these two parameters to get the general sound you want, and then
use the other parameters to add the finishing touches.
Experiment with various different settings.
There are no real rules about what a tone should sound like. Let your
imagination run free and experiment with different combinations.
You may be surprised at what you can achieve.
DATA EXAMPLE
No.
1
2
3
4
5
6
7
8
9
10
11
12
Parameter
PCM Set
Amp Envelope Set
Attack Rate
Release Rate
Pitch Envelope Set
Pitch
Transpose
Level
Touch Sense
Pan
Filter Sense
Filter Level
Range of Value
000 ~ 288
000 ~ 288
001 ~ 127
001 ~ 127
00 ~ 45
64 ~ 00 ~ 63
12 ~ 00 ~ 12
000 ~ 127
64 ~ 00 ~ 63
64 ~ 00 ~ 63
000 ~ 127
000 ~ 127
DCO1
244
244
087
027
00
00
00
087
09
63
000
079
DCO2
245
245
087
027
00
00
00
090
59
63
118
087
Base tone number
169
Tone Name
Strings + S.Sax
Press keys hard/soft
No.
1
2
3
4
5
6
7
8
9
10
11
12
Parameter
PCM Set
Amp Envelope Set
Attack Rate
Release Rate
Pitch Envelope Set
Pitch
Transpose
Level
Touch Sense
Pan
Filter Sense
Filter Level
Range of Value
000 ~ 288
000 ~ 288
001 ~ 127
001 ~ 127
00 ~ 45
64 ~ 00 ~ 63
12 ~ 00 ~ 12
000 ~ 127
64 ~ 00 ~ 63
64 ~ 00 ~ 63
000 ~ 127
000 ~ 127
DCO1
112
112
089
028
00
04
00
087
63
00
019
075
DCO2
113
113
115
028
00
04
00
095
63
00
019
095
Hold down keys
Base tone number 088
Tone Name
LFO Bell + Saw
Filter Level (000 to 127)
This parameter controls the extent to which the digital filter is ap-
plied. The greater the value, the more open the filter and the clearer
the sound produced. A smaller value softens the sound.
Naming a User Tone and Storing It In
Memory
The following procedure shows how to assign a name to a user tone
and store the tone in memory. Once a tone is stored, you can call it up
just as you do with a preset tone.
WK-1800/1600(E)-32~38 03.7.31, 5:21 PMPage 35 Adobe PageMaker 6.5J/PPC
37

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio WK-1800 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio WK-1800 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info